Kia - cee'd Sportswagon - Owners Manual - (2018)

ENGLISH CAR NAVIGATION SYSTEM SIMPLE MANUAL DEUTSCH FRANÇAIS ESPAÑOL ITALIANO NEDERLANDS РУССКИЙ SVENSKA PORTUGUÊS DANSK ČEŠTINA POLSKI SLOVENČINA TÜRKÇE KOREAN NORSK MAGYAR 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 1 2018-02-13 10:09:44 Precautions for safety Precautions for safety Safety Notes CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Always operate the vehicle in a safe manner. Do not be distracted by the vehicle while driving and always be fully aware of all driving conditions. Do not change settings or any functions. Pull over in a safe and legal manner before attempting such operations. When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside. To promote safety, certain functions are disabled unless the parking brake is on. Do not drop it and avoid heavy impacts at anytime. To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. The driver should not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. 2 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 2 2018-02-13 10:09:44 Table of contents Table of contents Precautions for safety 2 Safety Notes�������������������������������������������������������2 Searching for destination 13 Head unit�������������������������������������������������������������4 Steering wheel remote control�������������������������6 Address Search�������������������������������������������������13 POI (Points of interest)������������������������������������13 Kia service ���������������������������������������������������������14 Coordinates �������������������������������������������������������14 Previous destinations���������������������������������������15 Address book�����������������������������������������������������15 Load tour�����������������������������������������������������������15 My POI ���������������������������������������������������������������16 Home, Office, Favourites���������������������������������17 Radio Operation 7 Bluetooth® Wireless Technology 18 Listening to AM���������������������������������������������������7 Listening to DAB/FM�������������������������������������������7 Pairing and connecting the unit and a Bluetooth phone�����������������������������������������������18 Making a call by entering phone number�������19 Making a call by redialling �������������������������������19 Answering/Rejecting a call�������������������������������19 Switching call to the mobile phone�����������������19 Ending a call�������������������������������������������������������19 Using the menu during a phone call���������������20 Calling list�����������������������������������������������������������20 Contacts�������������������������������������������������������������20 Favourites ���������������������������������������������������������21 Table of contents 3 Name of each component 4 USB Operation 8 Playing USB music�����������������������������������������������8 Viewing USB image���������������������������������������������9 iPod Operation 11 Playing iPod�������������������������������������������������������11 Bluetooth® audio Connected Services 22 Before using Connected Services �������������������22 Features�������������������������������������������������������������23 Additional information 26 12 Playing Bluetooth audio�����������������������������������12 3 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 3 2018-02-13 10:09:44 Name of each component Name of each component Head unit 1 2 3 4 5 1. RADIO button Converts to the last played radio mode (DAB/FM,AM). 2. MEDIA button If a playable media is connected, press the button to move to the corresponding screen. If you want to select another media connected, press the button on the media screen. 3. WSEEK/TRACKS button ‐‐ When it is pressed for a short time • AM mode: plays previous/next available frequency. • DAB/FM mode: plays previous/next available station existion within [List] menu. (If there is none of one station in the [List] menu, the “Auto tuning” function is executed.) • MEDIA mode: plays previous/next file. (except for AUX) ‐‐ When it is pressed and held • AM mode: plays previous/next available frequency. • DAB/FM mode: plays previous/next available station existing within [List] menu. • MEDIA mode (except for Bluetooth, AUX and Android Auto): rewinds of fast forwards the file. 4. Reset hole Press with a thin object to reset the unit when it does not operate normally. 5. • 1 button ‐‐Power on Press this button in system OFF status. ‐‐Power off Press and hold this button in power ON status. • Volume control knob (-) Turn anti(clockwise) or clockwise to control volume. • AV on/off Press this button to turn AV on or off in power ON status. 4 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 4 2018-02-13 10:09:44 Name of each component 6 7 8 9 10 11 6. MAP button ‐‐Press to display the map screen of the current location. ‐‐Press to repeat the voice guidance on the map screen when a route is set. (Voice guidance for road names and numbers is not supported in some countries.) 9. SETUP button Press to go to the [Settings] menu. 10. button ‐‐AM mode: turn left/right to tune manually. ‐‐DAB/FM mode: turn left/right to search for a desired station and then press. 7. NAV button Press to move to the navigation menu screen. ‐‐MEDIA mode (except for Bluetooth, AUX, Apple CarPlay and Android Auto): turn left/right to search for the desired file and press. 8. ‐‐Navigation mode: turn left/right to change the map scale on the map screen. (Custom button) Press to go to the [Custom button settings] menu. After setting, press to use desired function. 11. Cover for protecting SD card (SD card insert slot) Insert the SD card into the slot. 5 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 5 2018-02-13 10:09:44 Name of each component Steering wheel remote control 1 2 3 4 5 6 1. 2. button • Each time this button is pressed, the Radio or Media mode is changed. You can select the modes to toggle in settings. • If the media is not connected, it is changed in the order DAB/FM > AM > DAB/FM. • button Press to mute the sound. (It will be paused in some media modes.) 4. button Press to switch to voice recognition mode when the phone supporting Android Auto/Apple CarPlay function is connected. To cancel it, press the button again. 3. • Volume (VOL+/VOL-) button Increases or decreases the volume level. / button • MEDIA mode (except for Bluetooth, AUX and Android Auto): rewinds or fast forwards the file. 5. ‐‐ When it is pressed for a short time. button Press to operate Bluetooth hands-free function. • Press to accept a call. • Press to make a call from last calls. • Press and hold for redialling. • Radio (DAB/FM, AM) mode: plays previous/next favourites. • MEDIA mode: plays previous/next file. (except for AUX) ‐‐ When it is pressed and held • AM mode: plays previous/next available frequency. • DAB/FM mode: plays previous/next stations. 6. button • Press to end the phone call during a call. • Press to reject the call in the incoming call screen. 6 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 6 2018-02-13 10:09:44 Radio Operation Radio Operation Listening to AM 1. Press [RADIO] on the head unit. 2. Press [AM] on the screen. The AM screen of the most recently listened station is displayed. Note Each time the [RADIO] button on the head unit is pressed, the mode is changed in the order DAB/FM > AM > DAB/FM. 3. Auto tuning (When there are no or one station in [List] menu): Note Each time the [RADIO] button on the head unit is pressed, the mode is changed in the order AM > DAB/FM > AM. 3. Auto tuning: • Press [WSEEK/TRACKS] on the head unit. ‐‐Plays previous/next available station. Manual tuning: • Turn [ ] (anti)clockwise. ‐‐The frequency moves up and down accordingly. Favourites tuning: Press [Favourites]. Press the favourites numbers of the desired broadcast station. • Press [WSEEK/TRACKS] on the head unit. ‐‐Plays previous/next available station. List tuning (When there are two or more stations in [List] menu): • Press [WSEEK/TRACKS] on the head unit. ‐‐Drag the station bar to the left/right to find the radio station that you want. ‐‐Press [C/V]. • Turn [ ] to the left/right and then press when the desired station is displayed in a highlighted colour. Favourites: • Press [Favourites]. Press the favourites numbers of the desired broadcast station. • Press [W/S] on the steering wheel remote control. ‐‐Plays previous/next available station existing within [List] menu. Manual tuning: • In the FM mode, press [Menu] > [Manual tune FM]. Station bar Listening to DAB/FM 1. Press [RADIO] on the head unit. 2. Press [DAB/FM] or [FM] on the screen. The DAB/FM screen of the most recent listened to station is displayed. 7 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 7 2018-02-13 10:09:45 USB Operation USB Operation Playing USB music You can play music files stored in a USB memory device. Skip Scan You can play the previous or next file. This function plays the first 10 seconds of each song in the media directory as a preview. 1. Press [ ]. Position Connect a USB device to the USB port and playback starts automatically. Screen Description • Press [C/V]. • Pressing [C] after 3 seconds of playback time plays the current file from the beginning. Head unit • Press [WSEEK/TRACKS]. • Pressing [TRACKS] after 3 seconds of playback time plays the current file from the beginning. Note To play USB music while a different source is playing, press [MEDIA] > [USB Music]. Search You can fast rewind/forward to a specific point of a file. Pause You can pause the playing file. Press [M] during playback. Press [d] to play it again. 2. Select the desired mode by pressing ] repeatedly. [ •[ ]: Plays the first 10 seconds of each song. Description •[ ]: Plays the first 10 seconds of each song within the current folder. Screen Press and hold [C/V] and then release at the point you want. •[ ]: Plays the first 10 seconds of each song within the [Artist], [Song], [Album], or [Recently added]. Head unit Press and hold [WSEEK/ TRACKS] and then release at the point you want. Position 8 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 8 2018-02-13 10:09:45 USB Operation Repeat Shuffle You can play a set of files repeatedly. 1. Press [ ]. You can play files in random order. 1. Press [ ]. Viewing USB image You can view image files saved in a USB memory device. 1. Connect a USB device to the USB port. 2. Press [MEDIA] > [USB Image]. Note If you want to remove the USB, remove the USB after selecting any other function. Switching to menu screen or full screen 2. Select the desired mode by pressing ] repeatedly. [ •[ 2. Press [ ] again to turn shuffle off. (If there is no operation for 10 seconds on menu screen mode, it switches to full screen mode.) ]: Plays all files sequentially. •[ ]: Repeats all files within the current folder. •[ Press the screen repeatedly. Skip ]: Repeats the current file, only. You can view the previous or next image by sliding to the left/right. •[ ]: Plays the files sequentially within the [Artist], [Song], [Album], or [Recently added]. (If there is an unsupported image file, the image is changed automatically every 5 seconds until the normal image is displayed.) Zoom in/out You can enlarge or reduce the image. Press [ / ] in menu screen or double-tap the screen quickly. 9 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 9 2018-02-13 10:09:45 USB Operation Rotating image Slideshow You can rotate the image in a clockwise direction. You can set the slideshow interval. The slideshow is played according to the time interval. Press [Rotate] in menu screen repeatedly. Info 1. Press [Slideshow]. This menu shows the file name, image size and file type of the current image. Press [Info]. 2. Select the slideshow interval. The slideshow is played. Notes • Press the screen once to stop the slideshow. • Slideshow is not available while driving. (Because of traffic regulations, slideshow is only available when your vehicle is parked.) 10 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 10 2018-02-13 10:09:45 iPod Operation iPod Operation Playing iPod 1. Use an iPod exclusive cable to connect an iPod to USB connector. Repeat Shuffle You can play a set of files repeatedly. 1. Press [ ]. You can play files in random order. 1. Press [ ]. 2. Select the desired mode by pressing ] repeatedly. [ 2. Press [ 2. Press [MEDIA]. To play an iPod while a different source is playing, press [MEDIA] > [iPod]. Pause You can pause the playing file. For details refer to page 8 (“Pause”). Skip You can play the previous or next file. For details refer to page 8 (“Skip”). Search You can fast rewind/forward to a specific point of a file. For details refer to page 8 (“Search”). •[ ]: Plays all files sequentially. •[ ]: Repeats the current file, only. ] again to turn shuffle off. 11 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 11 2018-02-13 10:09:45 Bluetooth® audio Bluetooth® audio Playing Bluetooth audio Starting the Bluetooth audio Pause • Music stored in the mobile phone can be played in the car through Bluetooth audio streaming. 1. Connect your Bluetooth device to the head unit. Press [ Press [ 2. Press [MEDIA]. • Bluetooth audio can be played only when a Bluetooth phone or Bluetooth audio device has been connected. To play Bluetooth audio, connect the Bluetooth phone to the car system. For more information on connecting Bluetooth, please refer to the owner’s manual [Pairing and connecting the unit and a Bluetooth phone] on page 18. The Bluetooth audio screen is displayed. Skip You can play the previous or next file. For details refer to page 8 (“Skip”). Repeat You can play a set of files repeatedly. Select the desired mode by pressing ] repeatedly. [ • If Bluetooth is disconnected while playing Bluetooth audio, the audio stream will be interrupted. • The audio streaming function may not be supported in some mobile phones. Only one function can be used at a time. You can not use the Bluetooth hands-free and the Bluetooth audio function at the same time. For example, if you convert to the Bluetooth hands-free while playing Bluetooth audio, the music stream is paused. ] during playback. ] to play it again. Shuffle Note To play Bluetooth audio while a different source is playing, press [MEDIA] > [Bluetooth Audio]. You can play files in random order. Select the desired mode by pressing ] repeatedly. [ Note These features may not be supported in some Bluetooth devices. • Playing music from the car is not possible when there are no music files saved in the mobile phone. 12 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 12 2018-02-13 10:09:45 Searching for destination Searching for destination Address Search You can find the destination by searching for an address. 1. Press [NAV] > [Address]. 3. Press [Set as destination]. 4. Press [Start guidance]. Note The destination is saved in the [Previous destinations] menu automatically, refer to page 15. 2. Enter the name of the Country, City/ Postcode, Street/No., House number or Intersection corresponding to the desired destination. POI (Points of interest) You can set a POI as destination using different search methods. 1. Press [NAV] > [POI]. 2. Tap on one of the search methods. • [Along route]: finds POI along route. • [Near current position]: finds POI near current vehicle position. • [Near destination]: finds POI near selected destination. • [Near scroll mark]: Search for POI’s around the current cursor when the map is scrolled. • [Name]: finds POI by the name of the facility. • [Near city centre]: finds POI located in a specific city. 13 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 13 2018-02-13 10:09:45 Searching for destination Kia service Name Coordinates You can set the facilities of Kia dealers as destination. You can search for a Kia dealers by entering its name using the keypad. You can find a destination by entering the coordinates of latitude and longitude. Near current position 1. Press [NAV] > [Kia service] > [Name]. 1. Press [NAV] > [Coordinates]. You can obtain search results near your current position. 2. Select the preferred country. 1. Press [NAV] > [Kia service] > [Near current position]. 3. Enter the dealer name and press [OK]. 4. Press the preferred item from the list. • Press [Distance], [Name] or [Category] to arrange the list in distance, name or category order. 2. Press the preferred item from the list. 3. Follow steps 3-4 of the “Address Search” on page 13. 5. Follow steps 3-4 of the “Address Search” on page 13. 2. Press [D˚M΄S˝], [D˚M΄] or [Decimal]. 3. Enter the coordinates and press [OK]. 4. Follow steps 3-4 of the “Address Search” on page 13. Note The information for the dealers facilities may not correspond with a result of map information, since the information can be provided up to date. 14 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 14 2018-02-13 10:09:45 Searching for destination Previous destinations Address book Load tour You can select one of the locations you have previously searched for as a destination, tourpoint and start point. You can select a destination from a location saved in the [Address book] menu. To utilize this function more effectively, destinations that you often travel to should be saved in advance. This function can be used to set a route with several tourpoints. 1. Press [NAV] > [Previous destinations]. First of all, store in the [Address book] menu through the destination search function. 1. Press [NAV] > [Address book]. You can find the destination to a location saved in the [Load tour] menu. To utilize this function more effectively, destinations that you often travel to should be saved in advance. Searching for tour 1. Press [NAV] > [Load tour]. • Press [Date], [Name] or [Category] to arrange the list in date, name or category order. • Press [Menu] > [Delete] to delete the previous destinations. Select the desired item, then press [Delete] > [Yes]. • Press [Date], [Name] or [Category] to arrange the list in date, name or category order. ‐‐[Mark all]: Marks all items. ‐‐[Unmark all]: Unmarks all items. 2. Press the preferred item from the list. 3. Follow steps 3-4 of the “Address Search” on page 13. • Press [Date] or [Name] to arrange the list in date or name order. 2. Press the preferred item from the list. 2. Select the desired item. 3. Follow steps 3-4 of the “Address Search” on page 13. 3. Press [OK] > [Start guidance]. 15 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 15 2018-02-13 10:09:45 Searching for destination Deleting the tour My POI 1. Press [Menu] > [Delete] in load tour list. This function is used to import personal POI data including the map information (position, name...) saved in USB memory device. Afterwards the data can be selected as destination through the My POI menu. 4. Press [Yes]. The list of POI groups is displayed. Note Supported POI group formats. • POI group format: “.kml”/ “.gpx” 2. Select the desired item, then press [Delete] > [Yes]. • Press [Date] or [Name] to arrange the list in date or name order. • [Mark all]: Marks all items. • [Unmark all]: Unmarks all items. Importing the POI data 5. Select the desired POI group. 1. Store the POI file including map information (position, name...) from web map in USB memory device. 2. Connect the USB device to the USB port. 3. Press [NAV] > [My POI] > [ ]. • Press [Mark all] to select all POI groups. • Press [Unmark all] to unmark all POI groups. 6. Press [Import]. The POI groups is imported. Or press [SETUP] > [Navigation] > [My data] > [Import My POI from USB]. 16 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 16 2018-02-13 10:09:46 Searching for destination Notes • If data stored to the USB use a different coordinate system with the current system, the importing position might be different from existing one. • Make sure that the POI data is normally imported. Finding a destination by My POI 1. Press [NAV] > [My POI]. 2. Select the POI group. The list of POI is displayed. Home, Office, Favourites If your home location, office location, and favourite locations are already in the [Favourites] menu they can be easily retrieved by tapping on them. First of all, store home, office or favourites in the [Favourites] menu through the destination search function. Registering Home, Office or Favourites 1. Press [NAV] > [Favourites]. 5. Input the desired name and press [OK]. It is saved in the [Favourites] menu automatically. Finding your Home, Office, or Favourite place 1. Press [NAV] > [Favourites] > [Home], [Office], or favourite place. 2. Press [Start guidance]. 3. Press the preferred item from the list. 4. Follow steps 3-4 of the “Address Search” on page 13. Note The destination is saved in the [Previous destinations] menu automatically, refer to page 15. 2. Press [Home], [Office], or [Favourite (1~6)]. 3. Select the desired position through the destination search function. 4. Press [OK] when the destination search is complete. 17 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 17 2018-02-13 10:09:46 Bluetooth® Wireless Technology Bluetooth® Wireless Technology Pairing and connecting the unit and a Bluetooth phone To use the Bluetooth feature, make sure the Bluetooth on your phone is turned on. Refer to your phone’s user guide. When no phones have been paired 1. Press [ ] > [All menus] > [Phone]. Or press [ ] on the steering wheel remote control. • [Cancel]: Cancels Bluetooth connection. 2. In your phone, initiate a search for Bluetooth devices. (The default vehicle name is KIA MOTORS.) 3. 1) If the SSP (Secure Simple Pairing) is not supported, enter the passkey on your Bluetooth device. (The default passkey is 0000.) 2) If the SSP (Secure Simple Pairing) is supported, press [Yes] on the pop-up screen of your Bluetooth device. (The pop-up screen may differ from the actual information of the Bluetooth device.) 4. Bluetooth device is connected. The mobile phone contacts and the calling list are downloaded. When the connection fails, failure message is displayed on the screen. 2) When using [ ] button, press [ ]. When a phone is already paired 1. Press [ ] > [All menus] > [Phone]. Or press [ ] on the steering wheel remote control. 2. Press the device from the Bluetooth device list pop-up screen. If you want to pair additional device, press [Add new]. Follow steps 3-4 of “When no phones have been paired”. When pairing additional device 1. 1) When  using [SETUP] button, press [SETUP] > [Bluetooth] > [Bluetooth connections]. 2. 1) Select the device you want to connect. 2) If  there is no device you want to connect, press [Add new]. 3. In your phone, initiate a search for Bluetooth devices. (The default vehicle name is KIA MOTORS.) 4. 1) If the SSP (Secure Simple Pairing) is not supported, enter the passkey on your Bluetooth device. (The default passkey is 0000.) 2) If the SSP (Secure Simple Pairing) is supported, press [Yes] on the pop-up screen of your Bluetooth device. (The pop-up screen may differ from the actual information of the Bluetooth device.) 18 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 18 2018-02-13 10:09:46 Bluetooth® Wireless Technology 5. Bluetooth device is connected. The mobile phone contacts and the calling list are downloaded. When the connection fails, failure message is displayed on the screen. Answering/Rejecting a call 1. If there is an incoming call, a popup message will appear. 2. Press [Accept] in the popup message or [ ] on the steering wheel remote control. Making a call by entering phone number Connect your unit and Bluetooth phone before making a call. 1. Enter the phone number using the keypad on the phone screen. 2. Press [ ] on the phone screen or [ the steering wheel remote control. Note If you press the wrong number, press [ delete one digit of the entered number. ] on ] to Making a call by redialling Press and hold [ ] on the phone screen or [ ] on the steering wheel remote control. Note Redialling is not possible when there is no number in the dialled calls list. As shown below, the call is switched to the mobile phone. To reject a call, select [Reject] in the popup message or [ ] on the steering wheel remote control. Notes • If the Call-ID service is available, the caller’s phone number is displayed. • If a caller’s phone number is saved in the phone book, the caller’s name is displayed on the unit. • Upon receiving a call, the [Reject] function may not be supported in some mobile phones. Switching call to the mobile phone 1. If you want to switch the call to the mobile phone while talking on the car hands-free, press [Use private] on the screen or press and hold [ ] on the steering wheel remote control. 2. If you want to switch the call to the car hands-free while talking on the mobile phone, press [Use hands-free] on the screen or press and hold [ ] on the steering wheel remote control. The call is switched to the car hands-free. Ending a call 1. To end a call, press [ ] on the phone screen or [ ] on the steering wheel remote control. 2. The call is ended. 19 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 19 2018-02-13 10:09:46 Bluetooth® Wireless Technology Using the menu during a phone call When making a call, you can use the following menu items. Calling list Contacts Making a call from calling list Making a call from contacts 1. Press [ ] on the phone screen or [ the steering wheel remote control. ] on 1. Press [ ] on the phone screen. The contacts are displayed on the screen. E D A Position A B C Description Switches a voice call from the car hands-free to the mobile phone. B Ends a call. C Moves to a screen for entering ARS numbers. D Sets the microphone volume. E Mutes/unmutes the microphone volume. 2. Press [All], [Dialled], [Received], or [Missed]. 2. Select the contact you want to call from the list of contacts. • [All]: Displays all calling list. • [Dialled]: Displays the outgoing calling list. • [Received]: Displays the incoming calling list. • [Missed]: Displays the missed calling list. 3. Press the entry you want to call. Note The calling list may not be saved in some mobile phones. 20 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 20 2018-02-13 10:09:46 Bluetooth® Wireless Technology Searching by name or number Favourites You can search contacts for the name or number that you enter. Calling Favourites 1. Press [ ] > [Menu] > [Search] on the phone screen. If the phone number has already been stored in the Favourites, it can be easily called by tapping on it. First of all, add the phone number in the Favourites. Refer to the “Adding as a Favourite” on page 21. 1. Press [ ] on the phone screen. 2. Select one of the contacts. 2. Enter the name or number, press [OK]. 3. Select the contact you want to call. 2. Select the desired favourite. Adding as a Favourite Up to 20 contacts can be added to [Favourites] menu. 1. Press [ screen. 3. Press [ ] > [Close] > [ ]. Note If the phone numbers have already been stored in the Favourites, you can add or delete them by pressing [Menu] > [Edit]. ] > [Add new] on the phone 21 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 21 2018-02-13 10:09:47 Connected Services Connected Services Before using Connected Services What is Connected Services? Connected Services use TomTom LIVE Service to allow users to receive additional information in their car navigation system through the mobile phone network. Traffic Delivers the most accurate traffic information every two minutes. If you set the destination, you can have recommendation to recalculate the route according to the traffic condition. Weather information Delivers weather information and forecast for five days, and delivers weather information of the major European cities on the map. Connecting phone for using Connected Services 1. Activate a Wi-Fi hotspot on your mobile phone, and search for Wi-Fi networks. (For details refer to your mobile phone's user manual.) Note By creating a Wi-Fi Hotspot, you may incur additional data charges depending on your data plan, particularly when roaming. The battery of the mobile phone may drain quickly so consider charging the phone while using Connected Services. 2. Press [SETUP] > [Wi-Fi]. 3. Press [Wi-Fi]. Especially, you can connect a hidden Wi-Fi Network.) Note When you connect the Network for the first time, the information sharing notice screen is displayed. Read carefully and then press [Agree]. Speed Camera Alerts Delivers camera alerts with accurate and timely speed warnings. Live POI (Points of interest) Delivers POI search results based on the real time location information. 4. Press [Wi-Fi network list]. Select the desired Network. (If you want to connect the Wi-Fi Network manually, press [Add Wi-Fi network]. 22 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 22 2018-02-13 10:09:47 Connected Services Features 2. Press the desired items. Traffic • [Near current position]: Searches POI near current vehicle position. The current traffic/road event information is basically displayed on the traffic information list. This feature may not be supported depending on condition. 1. Press [ ]>[ 2. Press [Near current position] or [Near destination]. • [Near destination]: Searches POI near selected destination. 3. Enter the desired POI (Points of interest) name and press [OK]. ] > [Traffic]. • [Previous]/[Next]: Toggles through different traffic events. • [Show on map]: Displays map screen for selected area. • [Recalculate]: Recalculates the route by reflecting traffic information. • It is displayed only when there is traffic information along route after a route is set. Live POI (Points of interest) • The total delay time will be displayed on title. This can be different from sum of each delay times due to roundingoff. Searching for POI by [Near current position] or [Near destination] 1. Press [ ] > [ ] > [Live POI]. 4. Select the desired destination. 5. Follow steps 3-4 of the “Address Search” on page 13. Searching for POI by [Near city centre] 1. Press [ ] > [ ] > [Live POI] > [Near city centre]. You can set a POI as destination using different search methods. 2. Enter the desired city name and press [OK]. 3. Enter the desired POI (Points of interest) name and press [OK]. 23 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 23 2018-02-13 10:09:47 Connected Services 4. Select the desired destination. Weather 5. Follow steps 3-4 of the “Address Search” on page 13. This provides weather forecast for the next day including the current day, for the current position and destination. Searching for POI by [Near scroll mark] 1. Perform a long press on the desired map area. The selected point will be centred on the screen and the scroll mark will be displayed. 1. Press [ ] > [ ] > [Weather] > [Current position] or [Destination]. • [Current position]: Displays weather information in your current position. 2. Press [ mark]. ]>[ • [Destination]: Displays weather information in your destination. ] > [Live POI] > [Near scroll 3. Enter the desired POI (Points of interest) name and press [OK]. Setting Favourites If your favourite locations have already been saved in the [Favourites] menu, you can check weather information for favourite locations easily. 1. Press [ ] > [ ] > [Weather] > [Favourites] > [Menu] > [Add]. 2. Search the city name and select the desired city. 3. Press [Add to favourites]. 2. Press the desired list for more weather information. 4. Select the desired destination. 5. Follow steps 3-4 of the “Address Search” on page 13. 24 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 24 2018-02-13 10:09:47 Connected Services 4. Press the desired list for more weather information. Speed Camera Alerts 1. Press [SETUP] > [Navigation] > [Guidance]. Notes • You can also add the current position or destination as favourites. 3. Press [MAP]. The alert for speed camera appears about 10 seconds or 100 m before the camera point of arrival. • Press [ ] > [ ] > [Weather] > [Current position] or [Destination] > [Menu] > [Add]. Deleting Favourites 1. Press [ ] > [ ] > [Weather] > [Favourites] > [Menu] > [Delete]. 2. Press [Camera alert] or [Danger zone alert]. The using notice screen is displayed. Read carefully and then press [Agree] to use the function. 2. Select the desired item, then press [Delete] > [Yes]. • [Mark all]: Marks all items. • [Unmark all]: Unmarks all items. Notes • The [Camera alert] or [Danger zone alert] is displayed only when the Wi-Fi Network has been connected. • According to the country legislation, the [Camera alert] might be changed to [Danger zone alert]. • According to the country legislation, the [Camera alert] or [Danger zone alert] might not be available. Notes • Depending on the region and the type of speed camera, the image might differ. • You can request the related information update by pressing the speed camera information icon. --When the camera alert appears but there is no speed camera, you can report to TomTom to delete the camera information by pressing the speed camera image. --When the speed camera appears but there is no camera alert, you can report to TomTom by pressing the speed camera report button. 25 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 25 2018-02-13 10:09:47 Additional information Additional information Imprint: The navigation system is provided by Specification Supported Profile KIA MOTORS Europe GmbH Theodor-Heuss-Allee 11 D-60486 Frankfurt am Main Tel.: +49 (0) 69 8509280 Fax: +49 (0) 69850928499 E-Mail: [email protected] Register Court: Frankfurt am Main Register number: HRB 53714 Represented by: Yongkew Park (CEO), Michael Cole (COO), Seung Jong Hong (CFO) VAT ID: DE 222 535 439. Supported Bluetooth Bluetooth Specification Frequency Range HFP 1.6, A2DP 1.2, AVRCP 1.5, PBAP 1.1 3.0 2402 MHz ~ 2480 MHz Output Power (Class2) Maximum 4.0 dBm Wi-Fi Declaration of Conformity Hereby, Kia Motors declares that the radio equipment type AVN is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kia.com/eu For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. Number of Channels 79 Standard IEEE 802.11 a/b/g/n/ac Frequency Range / Output Power 2402 to 2480 MHz / Maximum 20 dBm 5725 to 5850 MHz / Maximum 14 dBm 26 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 26 2018-02-13 10:09:47 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 27 2018-02-13 10:09:47 Support - Hotline Web Site: http://www.navigation.com/kia International Toll Free Number: 00800 18 23 53 22 Telephone number for all other countries (or if Toll Free numbers are not supported): +31 555 384 245 * To view the instructions of advanced features, please contact your authorised dealer for assistance with the owner’s manual. P/N: MFL69963507 1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 28 2018-02-13 10:09:47