Buick - Enclave - Owners Manual - 2020 - 2020

20_BUI_Enclave_COV_en_US_84337752A_2019APR18.ai 1 4/4/2019 9:29:24 AM 2020 Enclave C M Enclave Owner’s Manual Y CM MY CY CMY K 84337752 A Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . 2 Keys, Doors, and Windows . . . . . . 7 Seats and Restraints . . . . . . . . . . . 39 Storage . . . . . . . . . . . . . . . . . . . . . . . . . 96 Instruments and Controls . . . . . . 101 Lighting . . . . . . . . . . . . . . . . . . . . . . . 146 Infotainment System . . . . . . . . . . 155 Climate Controls . . . . . . . . . . . . . . 156 Driving and Operating . . . . . . . . . 164 Vehicle Care . . . . . . . . . . . . . . . . . . 247 Service and Maintenance . . . . . 326 Technical Data . . . . . . . . . . . . . . . . 340 Customer Information . . . . . . . . . 344 Reporting Safety Defects . . . . . . 354 OnStar . . . . . . . . . . . . . . . . . . . . . . . . 358 Connected Services . . . . . . . . . . . 366 Index . . . . . . . . . . . . . . . . . . . . 369 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 2 Introduction Introduction This manual describes features that may or may not be on the vehicle because of optional equipment that was not purchased on the vehicle, model variants, country specifications, features/applications that may not be available in your region, or changes subsequent to the printing of this owner’s manual. The names, logos, emblems, slogans, vehicle model names, and vehicle body designs appearing in this manual including, but not limited to, GM, the GM logo, BUICK, the BUICK Emblem, and ENCLAVE are trademarks and/or service marks of General Motors LLC, its subsidiaries, affiliates, or licensors. Refer to the purchase documentation relating to your specific vehicle to confirm the features. For vehicles first sold in Canada, substitute the name “General Motors of Canada Company” for Buick Motor Division wherever it appears in this manual. A French language manual can be obtained from your dealer, at www.helminc.com, or from: Keep this manual in the vehicle for quick reference. Canadian Vehicle Owners Helm, Incorporated Attention: Customer Service 47911 Halyard Drive Plymouth, MI 48170 USA Using this Manual To quickly locate information about the vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Danger, Warning, and Caution Warning messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them. Propriétaires Canadiens On peut obtenir un exemplaire de ce guide en français auprès du concessionnaire ou à l'adresse suivante: Litho in U.S.A. Part No. 84337752 A First Printing © 2019 General Motors LLC. All Rights Reserved. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Introduction { Danger Danger indicates a hazard with a high level of risk which will result in serious injury or death. { Warning Warning indicates a hazard that could result in injury or death. A circle with a slash through it is a safety symbol which means “Do Not,” “Do not do this,” or “Do not let this happen.” Symbols The vehicle has components and labels that use symbols instead of text. Symbols are shown along with the text describing the operation or information relating to a specific component, control, message, gauge, or indicator. M : Shown when the owner’s Caution Caution indicates a hazard that could result in property or vehicle damage. manual has additional instructions or information. * : Shown when the service manual has additional instructions or information. 0 : Shown when there is more information on another page — “see page.” 3 Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. See the features in this manual for information. u : Air Conditioning System G : Air Conditioning Refrigerant Oil 9 : Airbag Readiness Light ! : Antilock Brake System (ABS) $ : Brake System Warning Light 9 : Dispose of Used Components Properly P : Do Not Apply High Pressure Water B : Engine Coolant Temperature _ : Flame/Fire Prohibited H : Flammable [ : Forward Collision Alert R : Fuse Block Cover Lock Location + : Fuses j : ISOFIX/LATCH System Child Restraints Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 4 Introduction Q : Keep Fuse Block Covers Properly Installed | : Lane Change Alert @ : Lane Departure Warning A : Lane Keep Assist * : Malfunction Indicator Lamp : : Oil Pressure X : Park Assist ~ : Pedestrian Ahead Indicator O : Power 7 : Rear Cross Traffic Alert I : Registered Technician / : Remote Vehicle Start > : Seat Belt Reminders I : Side Blind Zone Alert h : Stop/Start 7 : Tire Pressure Monitor d : Traction Control/StabiliTrak/ Electronic Stability Control (ESC) a : Under Pressure V : Vehicle Ahead Indicator Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Introduction Instrument Panel Overview 5 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 6 Introduction 1. Air Vents 0 162. 2. Turn Signal Lever. See Turn and Lane-Change Signals 0 150. IntelliBeam System Button (If Equipped). See Exterior Lamp Controls 0 146. 3. Manual Mode 0 196. 4. Instrument Cluster (Base Level) 0 111 or Instrument Cluster (Uplevel) 0 114. Driver Information Center (DIC) Display. See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. 5. Windshield Wiper/Washer 0 103. 6. Traction Control/Electronic Stability Control 0 200. All-Wheel Drive Button (If Equipped). See Driver Mode Control 0 202. Sport Mode Button (If Equipped) or Tow/Haul Mode Button (If Equipped). See Driver Mode Control 0 202. 7. Light Sensor. See Automatic Headlamp System 0 149. 8. Hazard Warning Flashers 0 150. Assistance Systems for Parking or Backing 0 216 (If Equipped). Lane Keep Assist (LKA) 0 229 (If Equipped). 9. Infotainment 0 155. 10. Dual Automatic Climate Control System 0 156. Heated and Ventilated Front Seats 0 46 (If Equipped). 11. Wireless Charging 0 107 (If Equipped). 12. Shift Lever. See Automatic Transmission 0 191. 13. ENGINE START/STOP Button. See Ignition Positions 0 181. 14. Steering Wheel Controls 0 102. 15. Horn 0 103. 16. Steering Wheel Adjustment 0 102 (Out of View). 17. Cruise Control 0 203. Adaptive Cruise Control 0 206 (If Equipped). Heated Steering Wheel 0 102 (If Equipped). Forward Collision Alert (FCA) System 0 221 (If Equipped). 18. Hood Release. See Hood 0 250. 19. Data Link Connector (DLC) (Out of View). See Malfunction Indicator Lamp (Check Engine Light) 0 122. 20. Exterior Lamp Controls 0 146. 21. Instrument Panel Illumination Control 0 151. 22. Electric Parking Brake 0 198. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows Keys, Doors, and Windows Folding Mirrors . . . . . . . . . . . . . . . . . Heated Mirrors . . . . . . . . . . . . . . . . . Automatic Dimming Mirror . . . . . Reverse Tilt Mirrors . . . . . . . . . . . . Interior Mirrors Keys and Locks Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Remote Keyless Entry (RKE) System . . . . . . . . . . . . . . . . . . . . . . . . 8 Remote Keyless Entry (RKE) System Operation . . . . . . . . . . . . . 8 Remote Vehicle Start . . . . . . . . . . 15 Door Locks . . . . . . . . . . . . . . . . . . . . 17 Power Door Locks . . . . . . . . . . . . . 19 Delayed Locking . . . . . . . . . . . . . . . 19 Automatic Door Locks . . . . . . . . . 19 Lockout Protection . . . . . . . . . . . . . 20 Safety Locks . . . . . . . . . . . . . . . . . . . 20 Doors Liftgate . . . . . . . . . . . . . . . . . . . . . . . . 21 Vehicle Security Vehicle Security . . . . . . . . . . . . . . . . Vehicle Alarm System . . . . . . . . . Immobilizer . . . . . . . . . . . . . . . . . . . . Immobilizer Operation . . . . . . . . . 30 31 31 31 28 28 29 29 Exterior Mirrors Convex Mirrors . . . . . . . . . . . . . . . . 30 Power Mirrors . . . . . . . . . . . . . . . . . . 30 Interior Rearview Mirrors . . . . . . . 32 Automatic Dimming Rearview Mirror . . . . . . . . . . . . . . . . . . . . . . . . . 32 Rear Camera Mirror . . . . . . . . . . . . 32 Windows Windows . . . . . . . . . . . . . . . . . . . . . . . 34 Power Windows . . . . . . . . . . . . . . . 34 Sun Visors . . . . . . . . . . . . . . . . . . . . . 36 Roof Sunroof . . . . . . . . . . . . . . . . . . . . . . . . 37 7 Keys and Locks Keys { Warning Leaving children in a vehicle with a Remote Keyless Entry (RKE) transmitter is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the RKE transmitter in the vehicle, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with an RKE transmitter. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 8 Keys, Doors, and Windows To remove the key, press the button on the bottom of the RKE transmitter and pull the key out. Never pull the key out without pressing the button. If it becomes difficult to turn the key, inspect the key blade for debris. . Check the distance. The transmitter may be too far from the vehicle. . Check the location. Other vehicles or objects may be blocking the signal. . Check the transmitter's battery. See “Battery Replacement” later in this section. . If the transmitter is still not working correctly, see your dealer or a qualified technician for service. See your dealer if a new key is needed. The key inside the Remote Keyless Entry (RKE) transmitter is used for the driver door. Contact Roadside Assistance if locked out of the vehicle. See Roadside Assistance Program 0 348. With an active OnStar or connected service plan, an OnStar Advisor may remotely unlock the vehicle. See OnStar Overview 0 358. Remote Keyless Entry (RKE) System See Radio Frequency Statement 0 354. If there is a decrease in the Remote Keyless Entry (RKE) operating range: Remote Keyless Entry (RKE) System Operation The Keyless Access system allows for vehicle entry when the Remote Keyless Entry (RKE) transmitter is within 1 m (3 ft). See “Keyless Access Operation” following. The RKE transmitter functions may work up to 60 m (197 ft) away from the vehicle. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows Other conditions can impact the performance of the transmitter. See Remote Keyless Entry (RKE) System 0 8. Q : Press to lock all doors. The turn signal indicators may flash and/or the horn may sound on the second press to indicate locking. See Vehicle Personalization 0 137. If the driver door is open when Q is pressed, and Open Door Anti-Lockout is enabled through vehicle personalization, all doors will lock and then the driver door will 9 Q is Pressing K will disarm the theft-deterrent system. See Vehicle Alarm System 0 28. Pressing Q may also arm the theft-deterrent system. See Vehicle Alarm System 0 28. If equipped with auto mirror folding, press and hold K for one second to unfold the mirrors, if enabled. See Vehicle Personalization 0 137. If equipped with auto mirror folding, press and hold Q for one second to fold the mirrors, if enabled. See Vehicle Personalization 0 137. If equipped with remote windows, press and hold K to open all of the windows, if enabled. See Vehicle Personalization 0 137. K : Press to unlock the driver door. Press unlock again within five seconds to unlock all doors. The RKE transmitter can be programmed to unlock all doors on the first button press. See Vehicle Personalization 0 137. When remotely unlocking the vehicle at night the back-up lamps will come on for about 30 seconds to light your approach to the vehicle. The turn signal indicators may flash to indicate unlocking. See Vehicle Personalization 0 137. / : Press and release Q and then immediately press and hold / for at immediately unlock. See Vehicle Personalization 0 137. If the passenger door is open when pressed, all doors lock. least four seconds to start the engine from outside the vehicle using the RKE transmitter. See Remote Vehicle Start 0 15. 7 : Press and release one time to initiate vehicle locator. The exterior lamps flash and the horn chirps three times. Press and hold 7 for three seconds to sound the panic alarm. The horn sounds and the Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 10 Keys, Doors, and Windows turn signal lamps flash for 30 seconds, or until 7 is pressed again or the vehicle is started. If equipped with memory seats, RKE transmitters 1 and 2 are linked to seating positions of memory 1 or 2. See Memory Seats 0 43. b : Press twice quickly to open or close the liftgate. Keyless Unlocking/Locking from the Driver Door Press once to stop the liftgate from moving. Keyless Access Operation With the Keyless Access system, you can lock and unlock the doors and access the liftgate without removing the RKE transmitter from your pocket, purse, briefcase, etc. The RKE transmitter should be within 1 m (3 ft) of the liftgate or door being opened. The buttons are on the outside door handles. Keyless Access can be programmed to unlock all doors on the first lock/unlock press from the driver door. Keyless Unlocking can also be turned off. See Vehicle Personalization 0 137. When the doors are locked and the RKE transmitter is within 1 m (3 ft) of the driver door handle, pressing the lock/unlock button on the driver door handle will unlock the driver door. If the lock/unlock button is pressed again within five seconds, all passenger doors will unlock. Driver Shown, Passenger Similar Pressing the lock/unlock button will cause all doors to lock if any of the following occur: . It has been more than five seconds since the first lock/ unlock button press. . Two lock/unlock button presses were used to unlock all doors. . Any vehicle door has opened and all doors are now closed. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows Keyless Unlocking/Locking from Passenger Doors When the doors are locked and the RKE transmitter is within 1 m (3 ft) of the door handle, pressing the lock/ unlock button on that door handle will unlock all doors. Pressing the lock/unlock button will cause all doors to lock if any of the following occur: . The lock/unlock button was used to unlock all doors. . Any vehicle door has opened and all doors are now closed. Disable/Enable Keyless Unlocking of Exterior Door Handles and Liftgate If equipped, keyless unlocking of the exterior door handles and liftgate can be disabled and enabled. Disabling Keyless Unlocking: With the vehicle off, press and hold Q and K on the RKE transmitter at the same time for approximately three seconds. The turn signal lamps will flash four times quickly to indicate access is disabled. Using any exterior handle to unlock the doors or open the liftgate will cause the turn signal lamps to flash four times quickly, indicating access is disabled. If disabled, disarm the alarm system before starting the vehicle. Enabling Keyless Unlocking: With the vehicle off, press and hold Q and K on the RKE transmitter at the same time for approximately three seconds. The turn signal lamps will flash twice quickly to indicate access is enabled. Passive Locking The vehicle will lock several seconds after all doors are closed if the vehicle is off and at least one RKE transmitter has been removed or none remain in the interior. If other electronic devices interfere with the RKE transmitter signal, the vehicle may not detect the RKE transmitter inside the vehicle. If passive locking is enabled, the doors may lock with the RKE 11 transmitter inside the vehicle. Do not leave the RKE transmitter in an unattended vehicle. To customize the doors to automatically lock when exiting the vehicle, see “Remote Lock, Unlock, Start” under Vehicle Personalization 0 137. Temporary Disable of Passive Locking Temporarily disable passive locking by pressing and holding K on the interior door switch with a door open for at least four seconds, or until three chimes are heard. Passive locking will then remain disabled until Q on the interior door is pressed, or until the vehicle is turned on. Remote Left in Vehicle Alert When the vehicle is turned off and an RKE transmitter is left in the vehicle, the horn will chirp three times after all doors are closed. To turn on or off see Vehicle Personalization 0 137. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 12 Keys, Doors, and Windows Remote No Longer in Vehicle Alert If the vehicle is on with a door open, and then all doors are closed, the vehicle will check for RKE transmitters inside. If an RKE transmitter is not detected, the Driver Information Center (DIC) will display NO REMOTE DETECTED and the horn will chirp three times. This occurs only once each time the vehicle is driven. Keyless Liftgate Opening Press the touch pad on the liftgate handle to open the liftgate if the RKE transmitter is within 1 m (3 ft). The vehicle can be reprogrammed so that lost or stolen transmitters no longer work. Each vehicle can have up to eight transmitters matched to it. cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds. Programming with Recognized Transmitters The DIC displays READY FOR REMOTE #3, 4, 5, ETC. A new transmitter can be programmed to the vehicle when there are two recognized transmitters. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you. To access a vehicle with a weak transmitter battery, see Door Locks 0 17. 1. Press the button on the side of the RKE transmitter near the bottom and pull the key out. Never pull the key out without pressing the button. Programming Transmitters to the Vehicle 2. Place the two recognized transmitters in the cupholder. Only RKE transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. 3. Remove the key lock cylinder cap on the driver door handle. See Door Locks 0 17. Insert the vehicle key of the new transmitter into the key lock Key Access 4. Remove the top tray and the rubber mat inside the center console storage area. Place the new transmitter into the transmitter pocket. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows 5. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter. 6. Remove the transmitter from the transmitter pocket and press the transmitter K or Q button. To program additional transmitters, repeat Steps 3–5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode. 7. Put the key back into the transmitter. 8. Replace the key lock cylinder cap. See Door Locks 0 17. Programming without Recognized Transmitters If two currently recognized transmitters are not available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the transmitters you wish to program must be with you. 1. Press the button on the side of the RKE transmitter near the bottom and pull the key out. Never pull the key out without pressing the button. 2. Remove the key lock cylinder cap on the driver door handle. See Door Locks 0 17. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds. The DIC displays REMOTE LEARN PENDING, PLEASE WAIT. 3. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP. 13 The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT. 4. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 14 Keys, Doors, and Windows 5. Remove the top tray and the rubber mat inside the center console storage area. Place the new transmitter into the transmitter pocket. 6. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter. 7. Remove the transmitter from the transmitter pocket and press the transmitter K or Q button. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode. 8. Put the key back into the transmitter. 9. Replace the key lock cylinder cap. See Door Locks 0 17. Starting the Vehicle with a Low Transmitter Battery When the vehicle is started, if the transmitter battery is weak, the DIC may display NO REMOTE DETECTED or NO REMOTE KEY WAS DETECTED PLACE KEY IN TRANSMITTER POCKET THEN START YOUR VEHICLE. The DIC may also display REPLACE BATTERY IN REMOTE KEY. To start the vehicle: 1. Remove the top tray and the rubber mat inside the center console storage area. Place the new transmitter into the transmitter pocket. 2. With the vehicle in P (Park) or N (Neutral), press the brake pedal and ENGINE START/STOP. Replace the transmitter battery as soon as possible. Battery Replacement Replace the battery in the transmitter soon if the DIC displays REPLACE BATTERY IN REMOTE KEY. Caution When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows 15 Remote Vehicle Start To replace the battery: The vehicle has a remote starting feature that starts the engine from outside of the vehicle. / : This button is on the RKE transmitter. 2. Insert a flat, thin object and remove the back cover. 1. Press the button on the bottom of the RKE transmitter to remove the key. Never pull the key out without pressing the button. 3. Remove the old battery using a flat, nonmetal object. 4. Insert the new battery, positive side toward the back cover. Replace with a CR2032 or equivalent battery. 5. Push together the transmitter. 6. Insert the key back into the RKE transmitter. Laws in some communities may restrict the use of remote starters. For example, some laws may require a person using the remote start to have the vehicle in view when doing so. Check local regulations for any requirements on remote starting of vehicles. Do not use the remote start feature if the vehicle is low on fuel. The vehicle could run out of fuel. The RKE transmitter range may be less while the vehicle is running. Other conditions can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System 0 8. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 16 Keys, Doors, and Windows Starting the Engine Using Remote Start To start the vehicle: 1. Press and release RKE transmitter. Q on the 2. Immediately after completing Step 1, press and hold / until the lamps flash. If the vehicle's lights cannot be seen, press and hold / for at least four seconds. When the vehicle starts, the park lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system will operate automatically if the vehicle has the automatic system, or at the same setting as when the vehicle was last turned off. With an automatic climate control system and if equipped with heated seats, the heated seats turn on during colder outside temperatures and shut off when the ignition is turned on. See Heated and Ventilated Front Seats 0 46. If equipped with an auto heated steering wheel, it may come on during a remote start. See Heated Steering Wheel 0 102. The rear window defogger and heated mirrors, if equipped, turn on during colder outside temperatures and turn off when the ignition is turned on. After entering the vehicle during a remote start, press the brake and ENGINE START/STOP with the transmitter in the vehicle to drive the vehicle. If the vehicle is left running, it automatically shuts off after 15 minutes unless a time extension has been done. Extending Engine Run Time To extend the engine run time by 15 minutes, repeat Steps 1 and 2 while the engine is still running. An extension can be requested 30 seconds after starting. The engine run time can only be extended if it is the first remote start since the vehicle has been driven. Remote start can be extended one time. If the remote start procedure is used again while the engine is still running, 15 minutes will be added on for a total of 30 minutes. For example, if Q and then / are pressed again while the engine is still running, 15 minutes will be added on for a total of 30 minutes. A maximum of two remote starts or remote start with an extension are allowed between ignition cycles. After the vehicle's engine has been started two times using the remote start button or a start with an extension, the ignition must be turned on and then back off before the remote start procedure can be used again. Canceling a Remote Start To manually shut off a remote start: . Press and hold lamps turn off. / until the Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows . Turn on the hazard warning flashers. . Turn the ignition switch on and then off. Conditions in Which the Remote Start Will Not Work The remote start will not operate if any of the following occur: . The hood is open. . The vehicle is on. . There is an emission control system malfunction. . The vehicle is not in park. . The hazard switch is on. . Two remote starts or a remote start with an extension have already been used. The engine turns off during a remote start if the coolant temperature gets too high or if the oil pressure gets low. Door Locks Warning (Continued) { Warning Unlocked doors can be dangerous. . Passengers, especially children, can easily open the doors and fall out of a moving vehicle. The doors can be unlocked and opened while the vehicle is moving. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear seat belts properly and the doors should be locked whenever the vehicle is driven. . Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer (Continued) 17 permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it. . Outsiders can easily enter through an unlocked door when you slow down or stop the vehicle. Locking the doors can help prevent this from happening. To lock/unlock the doors from the outside: . Press Q or K on the Remote Keyless Entry (RKE) transmitter. See Remote Keyless Entry (RKE) System Operation 0 8. . Use the key in the driver door. The key lock cylinder is covered with a cap. To lock/unlock the doors from the inside: . Press Q or K on the power door lock switch. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 18 Keys, Doors, and Windows . Push down on the door lock knob to lock a door. . Pull the door handle once to unlock it. Pull the door handle again to unlatch it. Driver Door Key Lock Cylinder Access (In Case of Dead Battery) Keyless Access To access the driver door key lock cylinder: The RKE transmitter must be within 1 m (3 ft) of the liftgate or door being opened. Press the button on the door handle to open. See Remote Keyless Entry (RKE) System Operation 0 8. 1. Pull the door handle to the open position and hold it open until cap removal is complete. 2. Insert the key into the slot at the bottom of the cap and lift the key upward. 3. Move the cap rearward and remove. 4. Insert the key into the cylinder and turn to unlock. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows To replace the cap: Power Door Locks 1. Pull the door handle to the open position and hold it open until cap installation is complete. 3. Rotate the cap upward and install into place. 4. Check that the cap is secure. The door key lock cylinder turns freely when either the wrong key is used, or the correct key is not fully inserted. The free-turning door lock feature prevents the lock from being forced open. To reset the lock, turn it to the vertical position with the correct key fully inserted. Remove the key and insert it again. If this does not reset the lock, turn the key halfway around in the cylinder and repeat the reset procedure. When Q is pressed on the power door lock switch while the door is open, a chime will sound three times indicating delayed locking is active. The doors will lock automatically five seconds after all doors are closed. If a door is reopened before that time, the five-second timer will reset when all doors are closed again. 2. Position the bottom edge of the cap under the lower edge of the metal piece (2). The tabs (3) attach to the metal piece (2) at the positions (1). Free-Turning Locks 19 Q : Press to lock the doors. K : Press to unlock the doors. Delayed Locking This feature delays the locking of the doors until five seconds after all doors are closed. Delayed locking can only be turned on when the Open Door Anti-Lockout feature has been turned off. Press Q on the door lock switch again or press Q on the RKE transmitter to lock the doors immediately. This feature can also be programmed. See Vehicle Personalization 0 137. Automatic Door Locks The doors will lock automatically when all doors are closed, the ignition is on, and the vehicle is shifted out of P (Park). If a vehicle door is unlocked and then opened and closed, the doors will lock either when your foot is Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 20 Keys, Doors, and Windows removed from the brake or the vehicle speed becomes faster than 13 km/h (8 mph). has not reduced, the driver door will unlock and the horn will chirp three times. To unlock the doors: Lockout Protection can be manually overridden with the driver door open by pressing and holding Q on the power door lock switch. . Press K on the power door lock switch. . Shift into P (Park). Automatic door locking cannot be disabled. Automatic door unlocking can be programmed. See Vehicle Personalization 0 137. Lockout Protection If the ignition is on or in ACC/ ACCESSORY and the power door lock switch is pressed with the driver door open, all the doors will lock and only the driver door will unlock. If the vehicle is off and locking is requested while a door is open, when all doors are closed the vehicle will check for RKE transmitters inside. If an RKE transmitter is detected and the number of RKE transmitters inside Manual Safety Locks Open Door Anti-Lockout If Open Door Anti-Lockout has been turned on and the vehicle is off, the driver door is open, and locking is requested, all the doors will lock and the driver door will unlock. The Open Door Anti-Lockout feature can be turned on or off. See Vehicle Personalization 0 137. Safety Locks The rear door safety locks prevent passengers from opening the rear doors from inside the vehicle. If equipped, the safety lock is on the inside edge of the rear doors. To use the safety lock: 1. Move the lever down to the lock position. 2. Close the door. 3. Do the same for the other rear door. To open a rear door when the safety lock is on: 1. Unlock the door by activating the inside handle, by pressing the power door lock switch, Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows or by using the Remote Keyless Entry (RKE) transmitter. 2. Open the door from the outside. When the safety lock is enabled, adults and older children will not be able to open the rear door from the inside. Cancel the safety locks to enable the doors to open from the inside. To cancel the safety lock: 1. Unlock the door and open it from the outside. 2. Move the lever up to unlock. Do the same for the other door. Doors Warning (Continued) Liftgate . Adjust the climate control system to a setting that brings in only outside air and set the fan speed to the highest setting. See “Climate Control Systems” in the Index. . If the vehicle is equipped with a power liftgate, disable the power liftgate function. { Warning Exhaust gases can enter the vehicle if it is driven with the liftgate or trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle must be driven with the liftgate or trunk/hatch open: . Close all of the windows. . 21 Fully open the air outlets on or under the instrument panel. (Continued) See Engine Exhaust 0 190. Caution To avoid damage to the liftgate or liftgate glass, make sure the area above and behind the liftgate is clear before opening it. Manual Liftgate To unlock the liftgate, press K on the power door lock switch or press K on the Remote Keyless Entry Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 22 Keys, Doors, and Windows (RKE) transmitter twice within five seconds. See Remote Keyless Entry (RKE) System Operation 0 8. The liftgate has an electric latch. If the battery is disconnected or has low voltage, the liftgate will not open. The liftgate will resume operation when the battery is reconnected and charged. Always close the liftgate before driving. Power Liftgate Operation { Warning To open the liftgate, press the touch pad under the liftgate handle and lift up. With Keyless Access, the liftgate can be opened when locked if the RKE transmitter is within 1 m (3 ft) of the liftgate. See Remote Keyless Entry (RKE) System Operation 0 8. Use the pull cup to lower and close the liftgate. Do not press the touch pad while closing the liftgate. This may cause the liftgate to be unlatched. You or others could be injured if caught in the path of the power liftgate. Make sure there is no one in the way of the liftgate as it is opening and closing. Caution Driving with an open and unsecured liftgate may result in damage to the power liftgate components. The power liftgate switch is on the driver door. The vehicle must be in P (Park). The modes are: . MAX: Opens to maximum height. . 3/4: Opens to a reduced height that can be set from 3/4 to fully open. Use to prevent the liftgate from opening into overhead obstructions such as a garage door or roof-mounted cargo. The liftgate can be manually opened all the way. . OFF: Opens manually only. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows To power open or close the liftgate, select MAX or 3/4 mode. . Press b twice quickly on the RKE transmitter until the liftgate moves. . Press 8 on the driver door. The driver door must be unlocked. . Press the touch pad on the underside of the liftgate handle after unlocking all doors. A locked vehicle can be opened if the RKE transmitter is within 1 m (3 ft) of the liftgate. 23 Press l on the bottom edge of the liftgate to the left of the latch to close. power cycling over a short period of time. If this occurs, the liftgate can still be operated manually. Press any liftgate button, the touch pad, or b on the RKE transmitter while the liftgate is moving to stop it. Pressing any liftgate button or pressing b twice quickly on the RKE transmitter restarts the operation in the reverse direction. Pressing the touch pad on the liftgate handle will restart the motion, but only in the opening direction. If the vehicle is shifted out of P (Park) while the power function is in progress, the liftgate will continue to completion. If the vehicle is accelerated before the liftgate has completed moving, the liftgate may stop or reverse direction. Check for DIC messages and make sure the liftgate is closed and latched before driving. . Caution Manually forcing the liftgate to open or close during a power cycle can damage the vehicle. Allow the power cycle to complete. The power liftgate may be temporarily disabled under extreme low temperatures, or after repeated Falling Liftgate Detection If the power liftgate automatically closes after a power opening cycle, it indicates that the system is reacting to excess weight on the liftgate or a possible support strut failure. A repetitive chime will sound while the falling liftgate detection feature is operating. Remove any excess weight. If the liftgate continues to automatically close after opening, see your dealer for service before using the power liftgate. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 24 Keys, Doors, and Windows Interfering with the power liftgate motion or manually closing the liftgate too quickly after power opening may resemble a support strut failure. This could also activate the falling liftgate detection feature. Allow the liftgate to complete its operation and wait a few seconds before manually closing the liftgate. Obstacle Detection Features If the liftgate encounters an obstacle during a power open or close cycle, the liftgate will automatically reverse direction and move a short distance away from the obstacle. After removing the obstruction, the power liftgate operation can be used again. If the liftgate encounters multiple obstacles on the same power cycle, the power function will deactivate. After removing the obstructions, manually close the liftgate which will allow normal power operation functions to resume. If the vehicle is locked while the liftgate is closing, and an obstacle is encountered that prevents the liftgate from completely closing, the horn will sound as an alert that the liftgate did not close. Pinch sensors are on the side edges of the liftgate. If an object is caught between the liftgate and the vehicle and presses against this sensor, the liftgate will reverse direction and open fully. The liftgate will remain open until it is activated again or closed manually. Setting the 3/4 Mode To change the position the liftgate stops at when opening: 1. Select MAX or 3/4 mode and power open the liftgate. 2. Stop the liftgate movement at the desired height by pressing any liftgate switch. Manually adjust the liftgate position if needed. 3. Press and hold l to the left of the latch at the bottom of the liftgate until the turn signals flash and a beep sounds. This indicates the setting has been recorded. The liftgate cannot be set below a minimum programmable height. If there is no light flash or sound, then the height adjustment may be too low. Manual Operation Select OFF to manually operate the liftgate. See “Manual Liftgate” at the beginning of this section. Caution Attempting to move the liftgate too quickly and with excessive force may result in damage to the vehicle. Operate the liftgate manually with a smooth motion and moderate speed. The system includes a feature which limits the manual closing speed to protect the components. Hands-Free Operation If equipped, the liftgate may be operated with a kicking motion near the left side of the rear bumper at Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows the location of the projected logo. The RKE transmitter must be within 1 m (3 ft) of the rear bumper to operate the power liftgate hands-free. Caution (Continued) liftgate mode to OFF when cleaning or working near the rear bumper to avoid accidental opening. The hands-free feature will not work while the liftgate is moving. To stop the liftgate while in motion use one of the liftgate switches. The hands-free feature can be customized. See Vehicle Personalization 0 137. Choose from the following: On-Open and Close : The kicking motion is activated to both open and close the liftgate. On-Open Only : The kicking motion is activated to only open the liftgate. Off : The feature is disabled. 25 . Do not sweep your foot side to side. . Do not keep your foot under the bumper; the liftgate will not activate. . Do not touch the liftgate until it has stopped moving. Kick Zone To operate, move your foot in a forward kicking motion near the left side of the rear bumper at the location of the projected logo, then pull it back. The kick must come within 14 cm (6 in) of the rear bumper to activate. Then step back. Caution Splashing water may cause the liftgate to open. Keep the RKE transmitter away from the rear bumper detection area or turn the (Continued) This feature may be temporarily disabled under some conditions. If the liftgate does not respond to the kick, open or close the liftgate by another method or start the vehicle. The feature will be re-enabled. When closing the liftgate using this feature, there will be a short delay. The taillamps will flash and a chime will sound. Step away from the liftgate before it starts moving. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 26 Keys, Doors, and Windows Projected Logo If equipped with this feature, a vehicle logo will be projected for one minute onto the ground near the rear bumper when an RKE transmitter is detected within approximately 2 m (6 ft). The projected logo may not be visible under brighter daytime conditions. The projected logo will only be available for this RKE transmitter after it has been out of range for at least 20 seconds. If an RKE transmitter is again detected within approximately 2 m (6 ft) of the liftgate, or another hands-free operation has been detected, the one-minute timer will be reset. The projected logo will not work under these conditions: . The vehicle battery is low. 1. 1 m (3 ft) Hands-Free Operation Detection Zone 2. 2 m (6 ft) Projected Logo Detection Zone The projected logo shows where the kicking motion is to take place. . The transmission is not in P (Park). . Hands Free Liftgate Control is set to Off in vehicle personalization. See Vehicle Personalization 0 137. . Power liftgate is turned off. . The vehicle remains parked for 72 hours or more, with no RKE transmitter use or Keyless Access operation. To re-enable, press any button on the RKE transmitter or open and close a vehicle door. The projected logo will not work for a single RKE transmitter when a transmitter: . Has been left within approximately 2 m (6 ft) of the liftgate for several minutes. . Has been left inside the vehicle and all vehicle doors are closed. . Has approached the area outside of the liftgate five times within 10 minutes. Lens Cleaning Clean the recessed lens using a soft, damp cloth. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows 27 Hands-Free Liftgate and Projected Logo Availability Action Hands-Free Liftgate Projected Logo RKE transmitter entering projected logo detection zone Operative On for one minute RKE transmitter left inside projected logo detection zone for minimum of 10 minutes Operative Off until RKE transmitter button press or a door is opened and closed RKE transmitter brought in and out of Operative projected logo detection zone five times or more within 10 minutes Off for one hour or until RKE transmitter button press or a door is opened and closed Vehicle remains parked for more than Operative 72 hours Off until RKE transmitter button press or a door is opened and closed Vehicle battery is low Non-operative Off Transmission is not in P (Park) Non-operative Off Power liftgate is turned off Non-operative Off Hands-free liftgate is disabled in vehicle personalization Non-operative Off Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 28 Keys, Doors, and Windows Vehicle Security This vehicle has theft-deterrent features; however, they do not make the vehicle impossible to steal. Vehicle Alarm System This vehicle has an anti-theft alarm system. On Solid : Vehicle is secured during the delay to arm the system. Fast Flash : Vehicle is unsecured. A door, the hood, or the liftgate is open. Slow Flash : Alarm system is armed. Arming the Alarm System 1. Close the liftgate and the hood. Turn off the vehicle. 2. Lock the vehicle in one of three ways: . Use the RKE transmitter. The indicator light, on the instrument panel near the windshield, indicates the status of the system. Off : Alarm system is disarmed. . Use the Keyless Access system. . With a door open, press the inside Q. 3. After 30 seconds the alarm system will arm, and the indicator light will begin to slowly flash indicating the alarm system is operating. Pressing Q on the RKE transmitter a second time will bypass the 30-second delay and immediately arm the alarm system. The vehicle alarm system will not arm if the doors are locked with the key. If the driver door is opened without first unlocking with the RKE transmitter, the horn will chirp and the lights will flash to indicate pre-alarm. If the vehicle is not started, or the door is not unlocked by pressing K on the RKE transmitter during the 10-second pre-alarm, the alarm will be activated. The alarm will also be activated if a passenger door, the liftgate, or the hood is opened without first disarming the system. When the alarm is activated, the turn signals flash and the horn sounds for about 30 seconds. The alarm system will then re-arm to monitor for the next unauthorized event. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows Disarming the Alarm System To disarm the alarm system or turn off the alarm if it has been activated: K on the RKE transmitter. If the alarm system has been activated, a message will appear on the DIC. Immobilizer . Press . Unlock the vehicle using the Keyless Access system. See Radio Frequency Statement 0 354. . Start the vehicle. Immobilizer Operation To avoid setting off the alarm by accident: . Lock the vehicle after all occupants have left the vehicle and all doors are closed. . Always unlock a door with the RKE transmitter or use the Keyless Access system. Unlocking the driver door with the key will not disarm the system or turn off the alarm. How to Detect a Tamper Condition If K is pressed and the horn chirps and the lights flash three times, the alarm was activated while the alarm system was armed. This vehicle has a passive theft-deterrent system. The system does not have to be manually armed or disarmed. The vehicle is automatically immobilized when the vehicle is turned off. The immobilization system is disarmed when the ignition is on or in ACC/ACCESSORY and a valid transmitter is present in the vehicle. 29 The security light, in the instrument cluster, comes on if there is a problem with arming or disarming the theft-deterrent system. The system has one or more RKE transmitters matched to an immobilizer control unit in your vehicle. Only a correctly matched RKE transmitter will start the vehicle. If the transmitter is ever damaged, you may not be able to start your vehicle. When trying to start the vehicle, the security light may come on briefly when the ignition is turned on. If the engine does not start and the security light stays on, there is a problem with the system. Turn the ignition off and try again. If the vehicle will not change ignition modes, and the RKE transmitter appears to be undamaged, try another transmitter. Or, you may try placing the transmitter in the transmitter pocket located in the center console. See Remote Keyless Entry (RKE) System Operation 0 8. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 30 Keys, Doors, and Windows If the ignition mode will not change with the other transmitter or with a transmitter in the transmitter pocket, your vehicle needs service. If the ignition does change modes, the first transmitter may be faulty. See your dealer who can service the theft-deterrent system and have a new RKE transmitter programmed to the vehicle. It is possible for the immobilizer system to learn new or replacement RKE transmitters. Up to eight transmitters can be programmed for the vehicle. To program additional transmitters, see “Programming Transmitters to the Vehicle” under Remote Keyless Entry (RKE) System Operation 0 8. Do not leave the transmitter or device that disarms or deactivates the theft-deterrent system in the vehicle. Exterior Mirrors Power Mirrors Convex Mirrors { Warning A convex mirror can make things, like other vehicles, look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on the right. Check the inside mirror or glance over your shoulder before changing lanes. The passenger side mirror is convex shaped. A convex mirror's surface is curved so more can be seen from the driver seat. To adjust a mirror: 1. Press } or | to choose the driver or passenger mirror. 2. Press the arrows on the control pad to move each mirror in the desired direction. Folding Mirrors Manual Folding Mirrors The mirrors can be folded inward toward the vehicle to prevent damage when going through an Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows automatic car wash. Push the mirror outward to return it to the original position. . Do not stay in the unfolded position. . Vibrate at normal driving speeds. Power Folding Mirrors Fold and unfold the mirrors one time using the mirror controls to reset them to their normal position. A noise may be heard during the resetting of the power folding mirrors. This sound is normal after a manual folding operation. Remote Mirror Folding If equipped, press g to power fold the mirrors. Press again to unfold. Resetting the Power Folding Mirrors Reset the power folding mirrors if the mirrors: . Are accidentally obstructed while folding. . Are accidentally manually folded/ unfolded. If equipped, press and hold Q on the RKE transmitter for approximately one second to automatically fold the exterior mirrors. Press and hold K on the RKE transmitter for approximately one second to unfold. See Remote Keyless Entry (RKE) System Operation 0 8. This feature is turned on or off through vehicle personalization. See Vehicle Personalization 0 137. Memory Mirrors The vehicle may have memory mirrors. See Memory Seats 0 43. 31 Lane Change Alert (LCA) The vehicle may have LCA. See Lane Change Alert (LCA) 0 227. Side Blind Zone Alert The vehicle may have Side Blind Zone Alert. See Side Blind Zone Alert (SBZA) 0 226. Heated Mirrors K : Press to heat the mirrors. See “Rear Window Defogger” under Dual Automatic Climate Control System 0 156. Automatic Dimming Mirror The driver outside mirror automatically adjusts for the glare of headlamps from behind. Reverse Tilt Mirrors If equipped with memory seats, the passenger and/or driver mirror tilts to a preselected position when the Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 32 Keys, Doors, and Windows vehicle is in R (Reverse). This allows the curb to be seen when parallel parking. The mirror(s) return to the original position when: . The vehicle is shifted out of R (Reverse), or remains in R (Reverse) for about 30 seconds. . The ignition is turned off. . The vehicle is driven in R (Reverse) above a set speed. To turn this feature on or off, see Vehicle Personalization 0 137. Interior Mirrors Interior Rearview Mirrors Adjust the rearview mirror for a clear view of the area behind the vehicle. Do not spray glass cleaner directly on the mirror. Use a soft towel dampened with water. Automatic Dimming Rearview Mirror If equipped, automatic dimming reduces the glare of headlamps from behind. The dimming feature comes on when the vehicle is started. Rear Camera Mirror If equipped, this automatic dimming mirror provides a wide angle camera view of the area behind the vehicle. Pull the tab rearward to turn on the display. Push the tab forward to turn it off. When off, the mirror is automatic dimming. Adjust the mirror for a clear view of the area behind the vehicle while the display is off. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows To adjust the brightness, press the button (1) on the back of the rearview mirror without covering the light sensor (2). Each button press cycles the brightness between five settings. { Warning The Rear Camera Mirror (RCM) has a limited view. Portions of the road, vehicles, and other objects may not be seen. Do not drive or park the vehicle using only this camera. Objects may appear closer than they are. Check the outside mirrors or glance over your shoulder when making lane changes or merging. Failure to use proper care may result in injury, death, or vehicle damage. 33 The camera that provides the Rear Camera Mirror (RCM) image is above the license plate, next to the Rear Vision Camera (RVC). Troubleshooting If the tab is in the rearward position and a blue screen and d are displayed in the mirror and the display shuts off, see your dealer for service. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 34 Keys, Doors, and Windows The RCM may not work properly or display a clear image if: . There is glare from the sun or headlamps. This may obstruct objects from view. . Dirt, snow, or other debris blocks the camera lens. Clean the lens with a soft damp cloth, or if equipped, with the Rear Camera Washer. See Windshield Wiper/ Washer 0 103. . The back of the vehicle has been damaged and the position and mounting angle of the camera has changed. Windows { Warning Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. The vehicle aerodynamics are designed to improve fuel economy performance. This may result in a pulsing sound when either rear window is down and the front windows are up. To reduce the sound, open either a front window or the sunroof, if equipped. Power Windows { Warning Children could be seriously injured or killed if caught in the path of a closing window. Never leave the Remote Keyless Entry (RKE) transmitter in a vehicle with children. When there are children in the rear seat, use the window lockout switch to prevent operation of the windows. See Keys 0 7. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows Window Lockout 35 Window Express Movement All windows can be opened without holding the window switch. Press the switch down fully and quickly release to express open the window. If equipped, pull the window switch up fully and quickly release to express close the window. The power windows work when the ignition is on, in ACC/ACCESSORY, or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) 0 186. Using the window switch, press to open or pull to close the window. The windows may be temporarily disabled if they are used repeatedly within a short time. Briefly press or pull the window switch in the same direction to stop that window’s express movement. This feature stops the rear passenger window switches from working. . Press 2 to engage the rear window lockout feature. The indicator light is on when engaged. . Press 2 again to disengage. Window Automatic Reversal System The express-close feature will reverse window movement if it comes in contact with an object. Extreme cold or ice could cause the window to auto-reverse. The window will operate normally after the object or condition is removed. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 36 Keys, Doors, and Windows Automatic Reversal System Override { Warning If automatic reversal system override is active, the window will not reverse automatically. You or others could be injured and the window could be damaged. Before using automatic reversal system override, make sure that all people and obstructions are clear of the window path. When the engine is on, override the automatic reversal system by pulling and holding the window switch if conditions prevent it from closing. Programming the Power Windows Programming may be necessary if the vehicle battery has been disconnected or discharged. If the window is unable to express-up, program each express-close window: 1. Close all doors. Sun Visors 2. Turn the ignition on or to ACC/ ACCESSORY. 3. Partially open the window to be programmed. Then close it and continue to pull the switch briefly after the window has fully closed. 4. Open the window and continue to press the switch briefly after the window has fully opened. Remote Window Operation If equipped, this feature allows the windows to be opened and closed remotely. If enabled in vehicle personalization, press and hold K on the RKE transmitter to open the windows or Q to close the windows. See Vehicle Personalization 0 137. Pull the sun visor down to block glare. Detach the sun visor from the center mount to pivot to the side window and, if equipped, extend along the rod. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Keys, Doors, and Windows Roof Sunroof If equipped, the ignition must be on or in ACC/ACCESSORY, or Retained Accessory Power (RAP) must be active to operate the sunroof. See Ignition Positions 0 181 and Retained Accessory Power (RAP) 0 186. Slide Switch Express-Open/Express-Close : Press and release D (1) to express-open the sunroof. The sunshade will not open automatically. Press and release g (1) to express-close the sunroof. Open/Close (Manual Mode) : Fully press D (1) to open the sunroof. The sunshade will not automatically open with the sunroof. Release to stop at the desired position. Fully press g (1) to close the sunroof. Release to stop at the desired position. Tilt Switch 1. Sunroof Switch (SLIDE) 2. Vent Switch (TILT) Vent Feature : Press E (2) to vent the sunroof. Press again and hold to open the sunroof. Release to stop at the desired position. The sunshade will not open automatically. Press 37 g (2) to express-close the sunroof. Press again to stop the movement. The front sunshade can only be opened and closed manually. The sunshade can be opened by pushing up on the handle, and closed by pulling forward on the handle until it latches. Do not try to close the sunshade while the sunroof is fully opened or in the vent position. If equipped, the rear sunshade can only be opened or closed manually. To open, press the latch button (if equipped) on the handle while pushing up to unlatch it. The sunshade will retract to the open position. To close the sunshade, pull the handle forward until it latches. The sunroof cannot be opened or closed if the vehicle has an electrical failure. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 38 Keys, Doors, and Windows Automatic Reversal System The sunroof has an automatic reversal system that is only active when the sunroof is operated in express-close mode. If an object is in the path while express closing, the reversal system will detect an object, stop, and open the sunroof again. If frost or other conditions prevent closing, override the feature by closing the sunroof in manual mode. To stop movement, release the switch. Dirt and debris may collect on the sunroof seal or in the track. This could cause an issue with sunroof operation or noise. It could also plug the water drainage system. Periodically open the sunroof and remove any obstacles or loose debris. Wipe the sunroof seal and roof sealing area using a clean cloth, mild soap, and water. Do not remove grease from the sunroof. If water is seen dripping into the water drainage system, this is normal. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Seats and Restraints Seat Belt Care . . . . . . . . . . . . . . . . . 60 Replacing Seat Belt System Parts after a Crash . . . . . . . . . . . 61 Airbag System Head Restraints Head Restraints . . . . . . . . . . . . . . . 40 Front Seats Power Seat Adjustment . . . . . . . . 42 Lumbar Adjustment . . . . . . . . . . . . 42 Reclining Seatbacks . . . . . . . . . . . 43 Memory Seats . . . . . . . . . . . . . . . . . 43 Heated and Ventilated Front Seats . . . . . . . . . . . . . . . . . . . . . . . . . 46 Massage . . . . . . . . . . . . . . . . . . . . . . . 48 Rear Seats Rear Seats . . . . . . . . . . . . . . . . . . . . 48 Heated Rear Seats . . . . . . . . . . . . 51 Third Row Seats . . . . . . . . . . . . . . . 51 Seat Belts Seat Belts . . . . . . . . . . . . . . . . . . . . . How to Wear Seat Belts Properly . . . . . . . . . . . . . . . . . . . . . . Lap-Shoulder Belt . . . . . . . . . . . . . Seat Belt Use During Pregnancy . . . . . . . . . . . . . . . . . . . . Seat Belt Extender . . . . . . . . . . . . . Safety System Check . . . . . . . . . . 54 55 57 59 60 60 Airbag System . . . . . . . . . . . . . . . . . 61 Where Are the Airbags? . . . . . . . 63 When Should an Airbag Inflate? . . . . . . . . . . . . . . . . . . . . . . . 65 What Makes an Airbag Inflate? . . . . . . . . . . . . . . . . . . . . . . . 66 How Does an Airbag Restrain? . . . . . . . . . . . . . . . . . . . . . 66 What Will You See after an Airbag Inflates? . . . . . . . . . . . . . . 67 Passenger Sensing System . . . 68 Servicing the Airbag-Equipped Vehicle . . . . . . . . . . . . . . . . . . . . . . . 72 Adding Equipment to the Airbag-Equipped Vehicle . . . . . 72 Airbag System Check . . . . . . . . . . 73 Replacing Airbag System Parts after a Crash . . . . . . . . . . . . . . . . . 74 Child Restraints Older Children . . . . . . . . . . . . . . . . . Infants and Young Children . . . . Child Restraint Systems . . . . . . . Where to Put the Restraint . . . . . Lower Anchors and Tethers for Children (LATCH System) . . . . 74 76 78 80 81 39 Replacing LATCH System Parts After a Crash . . . . . . . . . . . . . . . . . 90 Securing Child Restraints (With the Seat Belt in the Rear Seat) . . . . . . . . . . . . . . . . . . . 91 Securing Child Restraints (With the Seat Belt in the Front Seat) . . . . . . . . . . . . . . . . . . . 93 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 40 Seats and Restraints Head Restraints Front Seats { Warning With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly. The vehicle's front seats have adjustable head restraints in the outboard seating positions. Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant's head. This position reduces the chance of a neck injury in a crash. The height of the head restraint can be adjusted. To raise or lower the head restraint, press the button located on the side of the head restraint, and pull up or push the head restraint down, and release the button. Pull and push on the head restraint after the button is released to make sure that it is locked in place. The front seat outboard head restraints are not removable. Rear Seats Second Row Seats The vehicle’s second row seats have adjustable head restraints in the outboard seating positions. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints The height of the head restraint can be adjusted. Pull the head restraint up to raise it. Try to move the head restraint to make sure that it is locked in place. Always adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant's head. When folding the seatback down, the head restraint will automatically fold out of the way as the seat is folded down. If you are installing a child restraint in the rear seat, see “Securing a Child Restraint Designed for the LATCH System” under Lower Anchors and Tethers for Children (LATCH System) 0 81. Return the lowered head restraint to the upright position until it locks into place. Push and pull on the head restraint to make sure it is locked. Third Row Seats The vehicle’s third row seats have head restraints in the outboard seating positions that cannot be adjusted up or down. To lower the head restraint, press the button, located on the top of the seatback, and push the head restraint down. Try to move the head restraint after the button is released to make sure that it is locked in place. 41 The third row outboard head restraints are not removable. The third row outboard head restraints are designed to be folded. The head restraint can be folded to allow for better visibility when the rear seat is unoccupied. When an occupant is in the seat, always return the head restraint to the upright position. Pull the head restraint up and push it rearward until it locks into place. Push and pull on the head restraint to make sure that it is locked. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 42 Seats and Restraints Lumbar Adjustment Front Seats Power Seat Adjustment { Warning You can lose control of the vehicle if you try to adjust a driver seat while the vehicle is moving. Adjust the driver seat only when the vehicle is not moving. { Warning The power seats will work with the ignition off. Children could operate the power seats and be injured. Never leave children alone in the vehicle. To adjust the seat: . Move the seat forward or rearward by sliding the control forward or rearward. . Raise or lower the front part of the seat cushion by moving the front of the control up or down. . Raise or lower the entire seat by moving the rear of the control up or down. To adjust the seatback, see Reclining Seatbacks 0 43. To adjust the lumbar support, see Lumbar Adjustment 0 42. Four-Way Shown, Two-Way Similar To adjust the lumbar support, if equipped: . Press and hold the front or rear of the control to increase or decrease lumbar support. . If equipped, press and hold the top or bottom of the control to raise or lower lumbar support. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints . Reclining Seatbacks { Warning 43 Tilt the top of the control forward to raise. Memory Seats Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the seat belts cannot do their job. The shoulder belt will not be against your body. Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries. Do not have a seatback reclined if the vehicle is moving. The lap belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear the seat belt properly. . Tilt the top of the control rearward to recline. If equipped, memory seats allow two drivers to save and recall their unique seat positions for driving the vehicle, and a shared exit position for getting out of the vehicle. Other feature positions may also be saved, such as power mirrors and power steering wheel, if equipped. Memory positions are linked to RKE transmitter 1 or 2 for automatic memory recalls. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 44 Seats and Restraints Before saving, adjust all available memory feature positions. Turn the vehicle on and then press and release SET; a beep will sound. Then immediately press and hold 1, 2, or B (Exit) until two beeps sound. To manually recall these positions, press and hold 1, 2, or B until the saved position is reached. Follow the instructions under “Saving Memory Positions.” The vehicle identifies the current driver’s RKE transmitter number (1–8). See Remote Keyless Entry (RKE) System Operation 0 8. Only RKE transmitters 1 and 2 can be used for automatic memory recalls. A Driver Information Center (DIC) welcome message indicating the transmitter number may display for the first few ignition cycles following a transmitter change. For Seat Entry Memory to work properly, save the positions to the memory button (1 or 2) matching the RKE transmitter number displayed in the DIC welcome message. Carry the linked RKE transmitter when entering the vehicle. Vehicle Personalization Settings . To have the Seat Entry Memory movement begin when the vehicle is started, select the Settings menu, then Vehicle, then Seating Position, and then Seat Entry Memory. Select On or Off. See “Seat Entry Memory” later in this section. . To begin Seat Exit Memory movement when the vehicle is turned off and the driver door is opened, or when the vehicle is turned off with the driver door already opened, select the Settings menu, then Vehicle, then Seating Position, and then Seat Exit Memory. Select On or Off. See “Seat Exit Memory” later in this section. . See Vehicle Personalization 0 137 for additional setting information. Identifying Driver Number To identify the driver number: 1. Move your RKE transmitter away from the vehicle. 2. Start the vehicle with another key or RKE transmitter. The DIC should display the driver number for the other RKE transmitter. Turn the vehicle off and remove the key or RKE transmitter from the vehicle. 3. Start the vehicle with the initial key or RKE transmitter. The DIC should display the driver number of your RKE transmitter. Saving Memory Positions Read these instructions completely before saving memory positions. To save preferred driving positions 1 and 2: 1. Turn the vehicle on or to ACC/ ACCESSORY. A DIC welcome message may indicate driver number 1 or 2. 2. Adjust all available memory features to the desired driving position. 3. Press and release SET; a beep will sound. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints 4. Immediately press and hold the 1 or 2 memory button matching the above DIC welcome message until two beeps sound. If too much time passes between releasing SET and pressing 1, the memory position will not be saved and two beeps will not sound. Repeat Steps 3 and 4. 1 or 2 corresponds to the driver number. See “Identifying Driver Number” previously in this section. 5. Repeat Steps 1–4 for a second driver using 1 or 2. To save the position for B and Seat Exit Memory features, repeat Steps 1–4 using B. This saves the position for getting out of the vehicle. Save preferred memory feature positions to both 1 and 2 if you are the only driver. Manually Recalling Memory Positions Press and hold 1, 2, or B to recall the previously saved memory positions if you are driver 1 or 2 identified in the DIC welcome message. RKE transmitters 3–8 will not recall memory positions. To stop Manual Memory recall movement, release 1, 2, or B or press any of the following controls: . Power seat . Memory SET . Power mirror, with the driver or passenger side mirror selected . Power steering wheel, if equipped Seat Entry Memory The vehicle identifies the number of the current driver’s RKE transmitter (1–8). See Remote Keyless Entry (RKE) System Operation 0 8. If the RKE transmitter is 1 or 2, and Seat Entry Memory is enabled in vehicle personalization, the positions saved to the same memory button number 45 1 or 2 are automatically recalled when the vehicle is turned on, or turned from off to ACC/ ACCESSORY. RKE transmitters 3–8 will not provide automatic memory recalls. To turn Seat Entry Memory on or off, see “Vehicle Personalization Settings” previously in this section and Vehicle Personalization 0 137. The vehicle must be in P (Park) to start Seat Entry Memory. Seat Entry Memory recall will complete if the vehicle is shifted out of P (Park) prior to reaching the saved memory position. To stop Seat Entry Memory recall movement, turn the vehicle off or press any of the following controls: . Power seat B . Memory SET, 1, 2, or . Power mirror, with the driver or passenger side mirror selected . Power steering wheel, if equipped Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 46 Seats and Restraints If the saved memory seat position does not automatically recall or recalls to the wrong positions, the driver’s RKE transmitter number (1 or 2) may not match the memory button number that positions were saved to. Try storing the position to the other memory button or try the other RKE transmitter. Seat Exit Memory Seat Exit Memory is not linked to an RKE transmitter. The position saved to B is used for all drivers. To turn Seat Exit Memory on or off, see "Vehicle Personalization Settings" previously in this section and Vehicle Personalization 0 137. If turned on, the position saved to B is automatically recalled when one of the following occurs: . The vehicle is turned off and the driver door is opened within a short time. . The vehicle is turned off with the driver door open. To stop Seat Exit Memory movement, press any of the following memory controls: . Power seat B . Memory SET, 1, 2, or . Power mirror, with the driver or passenger side mirror selected . Power steering wheel, if equipped Obstructions If something has blocked the driver seat and/or power steering wheel while recalling a memory position, the recall may stop. Remove the obstruction and try the recall again. If the memory position still does not recall, see your dealer. Heated and Ventilated Front Seats { Warning If temperature change or pain to the skin cannot be felt, the seat heater may cause burns. To reduce the risk of burns, use care when using the seat heater, especially for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket, cushion, cover, or similar item. This may cause the seat heater to overheat. An overheated seat heater may cause a burn or may damage the seat. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints When this feature is off, the heated and ventilated seat symbols on the buttons are white. When a heated seat is turned on, the symbol turns red. When a ventilated seat is turned on, the symbol turns blue. Heated and Ventilated Seat Buttons Shown, Heated Seat Buttons Similar If equipped, the buttons are near the climate controls on the center stack. To operate, the engine must be running. Press M or L to heat the driver or passenger seatback and cushion. Press C or {, if available, to ventilate the driver or passenger seat. A ventilated seat has a fan that pulls or pushes air through the seat. The air is not cooled. Press the button once for the highest setting. With each press of the button, the seat will change to the next lower setting, and then to the off setting. The indicator lights next to the buttons indicate three for the highest setting and one for the lowest. If the heated seats are on high, the level may automatically be lowered after approximately 30 minutes. The passenger seat may take longer to heat up. Auto Heated and Ventilated Seats When the vehicle is on, this feature will automatically activate the heated or ventilated seats at the level required by the vehicle’s interior temperature. The active high, medium, low, or off heated or ventilated seat level will be indicated by the manual heated 47 or ventilated seat buttons on the center stack. Use the manual heated or ventilated seat buttons on the center stack to turn auto heated or ventilated seats off. If the passenger seat is unoccupied, the auto heated or ventilated seats feature will not activate that seat. The auto heated or ventilated seats feature can be programmed to always be enabled when the vehicle is on. See Vehicle Personalization 0 137. Remote Start Heated and Ventilated Seats During a remote start, the heated or ventilated seats, if equipped, can be turned on automatically. When it is cold outside, the heated seats turn on, and when it is hot outside the ventilated seats turn on. The heated or ventilated seats may be canceled when the ignition is turned on. Press the heated or ventilated seat button to use the heated or ventilated seats after the vehicle is started. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 48 Seats and Restraints The heated or ventilated seat indicator lights do not turn on during a remote start. Rear Seats The temperature performance of an unoccupied seat may be reduced. This is normal. If equipped, the message REAR SEAT REMINDER LOOK IN REAR SEAT displays under certain conditions indicating there may be an item or passenger in the rear seat. Check before exiting the vehicle. The remote start heated or ventilated seats may be enabled or disabled in the vehicle personalization menu. See Remote Vehicle Start 0 15 and Vehicle Personalization 0 137. Massage If equipped, the ignition must be on to use the massage feature. Rear Seat Reminder If equipped, press the massage button to use the massage feature. To stop massage, press this button again. The massage feature will turn off after approximately 10 minutes. Press the massage button to restart the massage feature. This feature will activate when a second row door is opened while the vehicle is on or up to 10 minutes before the vehicle is turned on. There will be an alert when the vehicle is turned off. The alert does not directly detect objects in the rear seat; instead, under certain conditions, it detects when a rear door is opened and closed, indicating that there may be something in the rear seat. The feature is active only once each time the vehicle is turned on and off, and will require reactivation by opening and closing the second row doors. There may be an alert even when there is nothing in the rear seat; for example, if a child entered Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints the vehicle through the rear door and left the vehicle without the vehicle being shut off. The feature can be turned on or off. See Vehicle Personalization 0 137. Rear Seat Adjustment The second row seats slide forward for more room. 2. Lift the lever below the seat cushion and slide the seat forward or backward. Entering and Exiting the Third Row { Warning Using the third row seating position while the second row is folded could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position. Push and pull on the seat to make sure it is locked into place. { Warning To adjust the seat position: 1. Remove objects on the floor in front of or on the second row seat, or in the seat tracks on the floor. If the seatback and seat base are not locked, the seat could move forward in a sudden stop or crash and injure the occupant. Always push and pull on the seatbacks to be sure the seatback and seat base are locked. 49 Caution Folding a rear seat with the seat belts still fastened may cause damage to the seat or the seat belts. Always unbuckle the seat belts and return them to their normal stowed position before folding a rear seat. To access the third row from the passenger side: The second row passenger side seat can be easily moved for third row entry or exit with a forward-facing child restraint installed using the LATCH system. Remove a rear-facing child restraint before moving the seat for third row entry or exit. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 50 Seats and Restraints { Warning Returning the Seat to the Seating Position Remove the child from the child restraint before moving the seat forward for third row entry or exit. Failure to do so may result in injury to the child. To return the second row seat to its normal seating position: 1. Remove objects on the floor in front of or under the second row seat, or in the seat tracks on the floor. 2. Push on the seatback until the seat is locked into place. Reclining the Seatbacks To recline the seatbacks: 1. Remove objects on the floor behind or under the second row seat or in the seat tracks on the floor. 3. Push and pull on the seatback and seat cushion to make sure they are locked in place. 4. Check that the seat belt is not under the seat cushion. 1. Leaning rearward in the seat, pull the reclining seatback handle. 2. Move the seatback to the desired position, and then release the handle to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked. 2. Pull the handle on the side of the seat forward and pull the seat forward. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Folding the Seatbacks Heated Rear Seats { Warning If temperature change or pain to the skin cannot be felt, the seat heater may cause burns. See the Warning under Heated and Ventilated Front Seats 0 46. To fold the second row seatbacks: 1. Remove anything on or under the seat. 2. Pull up on the reclining seatback handle. The seatback will move forward and fold flat on top of the cushion. Do not place anything on the seat during this operation. To return the seatback to the seating position, lift the seatback and push it rearward until it locks into place. Push and pull on the seatback to make sure it is locked. 51 With the engine running, press M or L to heat the left or right outboard seat cushion. An indicator on the climate control display appears when this feature is on. This feature turns on at the highest setting. With each press of the button, the heated seat changes to the next lower setting, and then the off setting. Three lights indicate the highest setting, and one light indicates the lowest. If the heated seats are on high, the level may automatically be lowered after approximately 30 minutes. Third Row Seats { Warning If available, the buttons are on the rear of the center console. Using the third row seating position while the second row is folded, or pushed forward in the entry position, could cause injury in a sudden stop or crash. Be sure to return the seat to the (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 52 Seats and Restraints Warning (Continued) 3. Remove anything on or under the seat. passenger seating position. Push and pull on the seat to make sure it is locked into place. Folding the Seatback Caution Folding a rear seat with the seat belts still fastened may cause damage to the seat or the seat belts. Always unbuckle the seat belts and return them to their normal stowed position before folding a rear seat. To fold the third row seatback: 5. Stow the mini-latch in the holder in the headliner. 4. Disconnect the center seat belt mini-latch, using a key in the slot on the mini-buckle, and let the belt retract into the headliner. 1. Remove objects on the floor in front of or on the second row seat, or in the seat tracks on the floor. 2. If the second row seat is in the full rear position, adjust it forward to allow the third row seat to fold fully flat. 6. Pull the release strap located on the seatback. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints 7. Push the seatback forward to lay flat. 8. Repeat for the other seatback, if necessary. Returning the Seat to the Seating Position To return the seatback to the seating position: 1. From the rear of the vehicle, raise the seatback to the upright position using the pull strap on the back of the third row seat, or lift the seatback and push it into place from inside the vehicle. { Warning If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. 2. Push and pull on the seatback to make sure it is locked in place. 53 Power Seatback Folding { Warning A seat belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the seat belts are properly routed and attached, and are not twisted. 3. Reconnect the center seat belt mini-latch to the mini-buckle. Do not let it twist. 4. Pull on the seat belt to be sure the mini-latch is secure. If equipped, the third row seatbacks can also be folded forward and returned to the upright position by pressing and holding the switches on the passenger side of the rear cargo area. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 54 Seats and Restraints Seat Belts This section describes how to use seat belts properly, and some things not to do. { Warning Do not let anyone ride where a seat belt cannot be worn properly. In a crash, if you or your passenger(s) are not wearing seat belts, injuries can be much worse than if you are wearing seat belts. You can be seriously injured or killed by hitting things inside the vehicle harder or by being ejected from the vehicle. In addition, anyone who is not buckled up can strike other passengers in the vehicle. It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, passengers riding in these areas are more likely to be seriously injured or killed. Do not allow (Continued) Warning (Continued) passengers to ride in any area of the vehicle that is not equipped with seats and seat belts. Always wear a seat belt, and check that all passenger(s) are restrained properly too. This vehicle has indicators as a reminder to buckle the seat belts. See Seat Belt Reminders 0 120. Why Seat Belts Work When riding in a vehicle, you travel as fast as the vehicle does. If the vehicle stops suddenly, you keep going until something stops you. It could be the windshield, the instrument panel, or the seat belts! When you wear a seat belt, you and the vehicle slow down together. There is more time to stop because you stop over a longer distance and, when worn properly, your strongest bones take the forces from the seat belts. That is why wearing seat belts makes such good sense. Questions and Answers About Seat Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a seat belt? A: You could be — whether you are wearing a seat belt or not. Your chance of being conscious during and after a crash, so you can unbuckle and get out, is much greater if you are belted. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Q: If my vehicle has airbags, why should I have to wear seat belts? A: Airbags are supplemental systems only. They work with seat belts — not instead of them. Whether or not an airbag is provided, all occupants still have to buckle up to get the most protection. Also, in nearly all states and in all Canadian provinces, the law requires wearing seat belts. It is very important for all occupants to buckle up. Statistics show that unbelted people are hurt more often in crashes than those who are wearing seat belts. . Wear the shoulder belt over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash. { Warning You can be seriously injured, or even killed, by not wearing your seat belt properly. Follow these rules for everyone's protection. There are additional things to know about seat belts and children, including smaller children and infants. If a child will be riding in the vehicle, see Older Children 0 74 or Infants and Young Children 0 76. Review and follow the rules for children in addition to the following rules. this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries. There are important things to know about wearing a seat belt properly. How to Wear Seat Belts Properly . Sit up straight and always keep your feet on the floor in front of you (if possible). . Always use the correct buckle for your seating position. . Wear the lap part of the belt low and snug on the hips, just touching the thighs. In a crash, 55 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 56 Seats and Restraints Always use the correct buckle for your seating position. Never allow the lap or shoulder belt to become loose or twisted. Never wear the shoulder belt under both arms or behind your back. Never route the lap or shoulder belt over an armrest. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints { Warning The seat belt can be pinched if it is routed under plastic trim on the seat, such as trim around the rear seatback folding handle or side airbag. In a crash, pinched seat belts might not be able to provide adequate protection. Never allow seat belts to be routed under plastic trim pieces. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see “Seats” in the Index. Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. If you are using a rear seating position with a detachable seat belt and the seat belt is not attached, see Third Row Seats 0 51 for instructions on reconnecting the seat belt to the mini-buckle. The following instructions explain how to wear a lap-shoulder belt properly. 2. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. 57 If the shoulder portion of a passenger belt is pulled out all the way, the child restraint locking feature may be engaged. See Child Restraint Systems 0 78. If this occurs, let the belt go back all the way and start again. If the locking feature stays engaged after letting the belt go back to stowed position on the seat, move the seat rearward or recline the seat until the shoulder belt retractor lock releases. Engaging the child restraint locking feature in the front outboard seating position may affect the passenger sensing system. See Passenger Sensing System 0 68. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 58 Seats and Restraints 3. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Seat Belt Extender 0 60. Position the release button on the buckle so that the seat belt could be quickly unbuckled if necessary. If the webbing locks in the latch plate before it reaches the buckle, tilt the latch plate flat to unlock. To unlatch the belt, push the button on the buckle. The belt should return to its stowed position. 4. To make the lap part tight, pull up on the shoulder belt. Always stow the seat belt slowly. If the seat belt webbing returns quickly to the stowed position, the retractor may lock and cannot be pulled out. If this happens, pull the seat belt straight out firmly to unlock the webbing, and then release it. If the webbing is still locked in the retractor, see your dealer. Before a door is closed, be sure the seat belt is out of the way. If a door is slammed against a seat belt, damage can occur to both the seat belt and the vehicle. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Seat Belt Pretensioners Rear Seat Belt Comfort Guides This vehicle has seat belt pretensioners for the front outboard occupants. Although the seat belt pretensioners cannot be seen, they are part of the seat belt assembly. They can help tighten the seat belts during the early stages of a moderate to severe frontal, near frontal, or rear crash if the threshold conditions for pretensioner activation are met. Seat belt pretensioners can also help tighten the seat belts in a side crash or a rollover event. Rear seat belt comfort guides may provide added seat belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the shoulder belt away from the neck and head. Pretensioners work only once. If the pretensioners activate in a crash, the pretensioners and probably other parts of the vehicle’s seat belt system will need to be replaced. See Replacing Seat Belt System Parts after a Crash 0 61. Seat Belt Use During Pregnancy Do not sit on the outboard seat belt while entering or exiting the vehicle or at any time while sitting in the seat. Sitting on the seat belt can damage the webbing and hardware. Comfort guides are available through your dealer for the rear outboard seating positions. Instructions are included with the guides. Seat belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear seat belts. 59 A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy. The best way to protect the fetus is to protect the mother. When a seat belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making seat belts effective is wearing them properly. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 60 Seats and Restraints Seat Belt Extender If the vehicle's seat belt will fasten around you, you should use it. But if a seat belt is not long enough, your dealer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. To help avoid personal injury, do not let someone else use it, and use it only for the seat it is made to fit. The extender has been designed for adults. Never use it for securing child restraints. For more information on the proper use and fit of seat belt extenders see the instruction sheet that comes with the extender. seat belt system from performing properly. See your dealer to have it repaired. Torn, frayed, or twisted seat belts may not protect you in a crash. Torn or frayed seat belts can rip apart under impact forces. If a belt is torn or frayed, have it replaced immediately. If a belt is twisted, it may be possible to untwist by reversing the latch plate on the webbing. If the twist cannot be corrected, ask your dealer to fix it. Make sure the seat belt reminder light is working. See Seat Belt Reminders 0 120. Keep seat belts clean and dry. See Seat Belt Care 0 60. Safety System Check Seat Belt Care Periodically check the seat belt reminder, seat belts, buckles, latch plates, retractors, shoulder belt height adjusters (if equipped), and seat belt anchorages to make sure they are all in working order. Look for any other loose or damaged seat belt system parts that might keep a Keep belts clean and dry. Seat belts should be properly cared for and maintained. Seat belt hardware should be kept dry and free of dust or debris. As necessary, exterior hard surfaces and seat belt webbing may be lightly cleaned with mild soap and water. Ensure there is not excessive dust or debris in the mechanism. If dust or debris exists in the system please see the dealer. Parts may need to be replaced to ensure proper functionality of the system. { Warning Do not bleach or dye seat belt webbing. It may severely weaken the webbing. In a crash, they might not be able to provide adequate protection. Clean and rinse seat belt webbing only with mild soap and lukewarm water. Allow the webbing to dry. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Replacing Seat Belt System Parts after a Crash { Warning A crash can damage the seat belt system in the vehicle. A damaged seat belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the seat belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible. 61 After a minor crash, replacement of seat belts may not be necessary. But the seat belt assemblies that were used during any crash may have been stressed or damaged. See your dealer to have the seat belt assemblies inspected or replaced. Airbag System . A frontal airbag for the front outboard passenger New parts and repairs may be necessary even if the seat belt system was not being used at the time of the crash. . A front center airbag for the driver and front outboard passenger . A seat-mounted side impact airbag for the driver . A seat-mounted side impact airbag for the front outboard passenger . A roof-rail airbag for the driver and for the second and third row passengers seated directly behind the driver . A roof-rail airbag for the front outboard passenger and the second and third row passengers seated directly behind the front outboard passenger Have the seat belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light 0 120. The vehicle has the following airbags: . A frontal airbag for the driver Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 62 Seats and Restraints All vehicle airbags have the word AIRBAG on the trim or on a label near the deployment opening. For frontal airbags, the word AIRBAG is on the center of the steering wheel for the driver and on the instrument panel for the front outboard passenger. For the front center airbag, the word AIRBAG is on the inboard side of the driver seatback. For seat-mounted side impact airbags, the word AIRBAG is on the side of the seatback or side of the seat closest to the door. For roof-rail airbags, the word AIRBAG is on the ceiling or trim. Airbags are designed to supplement the protection provided by seat belts. Even though today's airbags are also designed to help reduce the risk of injury from the force of an inflating bag, all airbags must inflate very quickly to do their job. Here are the most important things to know about the airbag system: { Warning { Warning You can be severely injured or killed in a crash if you are not wearing your seat belt, even with airbags. Airbags are designed to work with seat belts, not replace them. Also, airbags are not designed to inflate in every crash. In some crashes seat belts are the only restraint. See When Should an Airbag Inflate? 0 65. Because airbags inflate with great force and faster than the blink of an eye, anyone who is up against, or very close to any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to any airbag, as you would be if sitting on the edge of the seat or leaning forward. Seat belts help keep you in position before and during a crash. Always wear a seat belt, even with airbags. The driver should sit as far back as possible while still maintaining control of the vehicle. The seat belts and the front outboard passenger airbags are most effective when you are sitting well back and upright in the seat with both feet on the floor. (Continued) Wearing your seat belt during a crash helps reduce your chance of hitting things inside the vehicle or being ejected from it. Airbags are “supplemental restraints” to the seat belts. Everyone in the vehicle should wear a seat belt properly, whether or not there is an airbag for that person. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Where Are the Airbags? Warning (Continued) Occupants should not lean on or sleep against the front center armrest or console in vehicles with a front center airbag. Occupants should not lean on or sleep against the door or side windows in seating positions with seat-mounted side impact airbags and/or roof-rail airbags. 63 There is an airbag readiness light on the instrument cluster, which shows the airbag symbol. The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See Airbag Readiness Light 0 120. { Warning The driver frontal airbag is in the center of the steering wheel. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Always secure children properly in the vehicle. To read how, see Older Children 0 74 or Infants and Young Children 0 76. The front outboard passenger frontal airbag is in the passenger side instrument panel. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 64 Seats and Restraints The front center airbag is in the inboard side of the driver seatback. Driver Side Shown, Passenger Side Similar Driver Side Shown, Passenger Side Similar The driver and front outboard passenger seat-mounted side impact airbags are in the side of the seatbacks closest to the door. The roof-rail airbags for the driver, front outboard passenger, and second and third row outboard passengers are in the ceiling above the side windows. { Warning If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Warning (Continued) or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag covering. Do not use seat or console accessories that block the inflation path of a seat-mounted side impact airbag or the front center airbag. Never secure anything to the roof of a vehicle with roof-rail airbags by routing a rope or tie-down through any door or window opening. If you do, the path of an inflating roof-rail airbag will be blocked. 65 When Should an Airbag Inflate? It depends on what is hit, the direction of the impact, and how quickly the vehicle slows down. This vehicle is equipped with airbags. See Airbag System 0 61. Airbags are designed to inflate if the impact exceeds the specific airbag system's deployment threshold. Deployment thresholds are used to predict how severe a crash is likely to be in time for the airbags to inflate and help restrain the occupants. The vehicle has electronic sensors that help the airbag system determine the severity of the impact. Deployment thresholds can vary with specific vehicle design. Frontal airbags may inflate at different crash speeds depending on whether the vehicle hits an object straight on or at an angle, and whether the object is fixed or moving, rigid or deformable, narrow or wide. Frontal airbags are designed to inflate in moderate to severe frontal or near frontal crashes to help reduce the potential for severe injuries, mainly to the driver's or front outboard passenger's head and chest. Whether the frontal airbags will or should inflate is not based primarily on how fast the vehicle is traveling. Frontal airbags are not intended to inflate during vehicle rollovers, in rear impacts, or in many side impacts. In addition, the vehicle has advanced technology frontal airbags. Advanced technology frontal airbags adjust the restraint according to crash severity. The front center airbag is designed to inflate in moderate to severe side crashes depending upon the location of the impact, when either side of the vehicle is struck. In addition, the front center airbag is designed to inflate when the sensing system predicts that the vehicle is about to roll over on its Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 66 Seats and Restraints side. The front center airbag is not designed to inflate in frontal impacts, near frontal impacts, or rear impacts. Seat-mounted side impact airbags are designed to inflate in moderate to severe side crashes depending on the location of the impact. Seat-mounted side impact airbags are not designed to inflate in frontal impacts, near frontal impacts, rollovers, or rear impacts. A seat-mounted side impact airbag is designed to inflate on the side of the vehicle that is struck. Roof-rail airbags are designed to inflate in moderate to severe side crashes depending on the location of the impact. In addition, these roof-rail airbags are designed to inflate during a rollover or in a severe frontal impact. Roof-rail airbags are not designed to inflate in rear impacts. Both roof-rail airbags will inflate when either side of the vehicle is struck, if the sensing system predicts that the vehicle is about to roll over on its side, or in a severe frontal impact. In any particular crash, no one can say whether an airbag should have inflated simply because of the vehicle damage or repair costs. What Makes an Airbag Inflate? In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover. The inflator, the airbag, and related hardware are all part of the airbag module. For airbag locations, see Where Are the Airbags? 0 63. How Does an Airbag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle. Airbags supplement the protection provided by seat belts by distributing the force of the impact more evenly over the occupant's body. Rollover capable roof-rail airbags are designed to help contain the head and chest of occupants in the outboard seating positions in the first, second, and third rows. The rollover capable roof-rail airbags are designed to help reduce the risk of full or partial ejection in rollover events, although no system can prevent all such ejections. But airbags would not help in many types of collisions, primarily because the occupant's motion is not toward those airbags. See When Should an Airbag Inflate? 0 65. Airbags should never be regarded as anything more than a supplement to seat belts. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints What Will You See after an Airbag Inflates? After frontal and seat-mounted side impact airbags inflate, they quickly deflate, so quickly that some people may not even realize the airbags inflated. The front center airbag and roof-rail airbags may still be at least partially inflated for some time after they inflate. Some components of the airbag module may be hot for several minutes. For location of the airbags, see Where Are the Airbags? 0 63. The parts of the airbag that come into contact with you may be warm, but not too hot to touch. There may be some smoke and dust coming from the vents in the deflated airbags. Airbag inflation does not prevent the driver from seeing out of the windshield or being able to steer the vehicle, nor does it prevent people from leaving the vehicle. { Warning When an airbag inflates, there may be dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so. If you have breathing problems but cannot get out of the vehicle after an airbag inflates, then get fresh air by opening a window or a door. If you experience breathing problems following an airbag deployment, you should seek medical attention. The vehicle has a feature that may automatically unlock the doors, turn on the interior lamps and hazard warning flashers, and shut off the fuel system after the airbags inflate. The feature may also activate, without airbag inflation, after an event that exceeds a predetermined threshold. After turning the ignition 67 off and then on again, the fuel system will return to normal operation; the doors can be locked, the interior lamps can be turned off, and the hazard warning flashers can be turned off using the controls for those features. If any of these systems are damaged in the crash they may not operate as normal. { Warning A crash severe enough to inflate the airbags may have also damaged important functions in the vehicle, such as the fuel system, brake and steering systems, etc. Even if the vehicle appears to be drivable after a moderate crash, there may be concealed damage that could make it difficult to safely operate the vehicle. Use caution if you should attempt to restart the engine after a crash has occurred. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 68 Seats and Restraints In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the front outboard passenger airbag. . Airbags are designed to inflate only once. After an airbag inflates, you will need some new parts for the airbag system. If you do not get them, the airbag system will not be there to help protect you in another crash. A new system will include airbag modules and possibly other parts. The service manual for the vehicle covers the need to replace other parts. . The vehicle has a crash sensing and diagnostic module which records information after a crash. See Vehicle Data Recording and Privacy 0 355 and Event Data Recorders 0 356. . Let only qualified technicians work on the airbag systems. Improper service can mean that an airbag system will not work properly. See your dealer for service. Passenger Sensing System The vehicle has a passenger sensing system for the front outboard passenger position. The passenger airbag status indicator will light on the overhead console when the vehicle is started. The words ON and OFF, and the symbols for on and off, will be visible during the system check. When the system check is complete, either the word ON or OFF, and the symbol for on or off, will be visible. See Passenger Airbag Status Indicator 0 121. The passenger sensing system turns off the front outboard passenger frontal airbag under certain conditions. No other airbag is affected by the passenger sensing system. The passenger sensing system works with sensors that are part of the front outboard passenger seat and seat belt. The sensors are designed to detect the presence of a properly seated occupant and determine if the front outboard passenger frontal airbag should be allowed to inflate or not. According to accident statistics, children are safer when properly secured in a rear seat in the correct child restraint for their weight and size. Whenever possible, children aged 12 and under should be secured in a rear seating position. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great, if the airbag inflates. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints { Warning Warning (Continued) A child in a rear-facing child restraint can be seriously injured or killed if the passenger frontal airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the passenger frontal airbag inflates and the passenger seat is in a forward position. the front outboard passenger seat, always move the seat as far back as it will go. It is better to secure child restraints in the rear seat. Consider using another vehicle to transport the child when a rear seat is not available. Even if the passenger sensing system has turned off the passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though the airbag is turned off. Never put a rear-facing child restraint in the front seat, even if the airbag is off. If securing a forward-facing child restraint in (Continued) The passenger sensing system is designed to turn off the front outboard passenger frontal airbag if: . The front outboard passenger seat is unoccupied. . The system determines an infant is present in a child restraint. . A front outboard passenger takes his/her weight off of the seat for a period of time. . There is a critical problem with the airbag system or the passenger sensing system. When the passenger sensing system has turned off the front outboard passenger frontal airbag, 69 the OFF indicator will light and stay lit as a reminder that the airbag is off. See Passenger Airbag Status Indicator 0 121. The passenger sensing system is designed to turn on the front outboard passenger frontal airbag anytime the system senses that a person of adult size is sitting properly in the front outboard passenger seat. When the passenger sensing system has allowed the airbag to be enabled, the ON indicator will light and stay lit as a reminder that the airbag is active. For some children, including children in child restraints, and for very small adults, the passenger sensing system may or may not turn off the front outboard passenger frontal airbag, depending upon the person's seating posture and body build. Everyone in the vehicle who has outgrown child restraints should wear a seat belt properly — whether or not there is an airbag for that person. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 70 Seats and Restraints { Warning If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light 0 120 for more information, including important safety information. If the On Indicator Is Lit for a Child Restraint The passenger sensing system is designed to turn off the front outboard passenger frontal airbag if the system determines that an infant is present in a child restraint. If a child restraint has been installed and the ON indicator is lit: 1. Turn the vehicle off. 2. Remove the child restraint from the vehicle. 3. Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers. 4. Reinstall the child restraint following the directions provided by the child restraint manufacturer and refer to Securing Child Restraints (With the Seat Belt in the Rear Seat) 0 91 or Securing Child Restraints (With the Seat Belt in the Front Seat) 0 93. Make sure the seat belt retractor is locked by pulling the shoulder belt all the way out of the retractor when installing the child restraint, even if the child restraint is equipped with a seat belt lock off. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor. 5. If, after reinstalling the child restraint and restarting the vehicle, the ON indicator is still lit, turn the vehicle off. Then slightly recline the vehicle seatback and adjust the seat cushion, if adjustable, to make sure that the vehicle seatback is not pushing the child restraint into the seat cushion. Also make sure the child restraint is not trapped under the vehicle head restraint. If this happens, adjust the head restraint. See Head Restraints 0 40. 6. Restart the vehicle. The passenger sensing system may or may not turn off the airbag for a child in a child restraint depending upon the child’s size. It is better to secure the child restraint in a rear seat. Never put a rear-facing child restraint in the front seat, even if the ON indicator is not lit. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints If the Off Indicator Is Lit for an Adult-Sized Occupant 2. Remove any additional material from the seat, such as blankets, cushions, seat covers, seat heaters, or seat massagers. 3. Place the seatback in the fully upright position. 4. Have the person sit upright in the seat, centered on the seat cushion, with legs comfortably extended. If a person of adult size is sitting in the front outboard passenger seat, but the OFF indicator is lit, it could be because that person is not sitting properly in the seat or that the child restraint locking feature is engaged. Use the following steps to allow the system to detect that person and enable the front outboard passenger frontal airbag: 1. Turn the vehicle off. 5. If the shoulder portion of the belt is pulled out all the way, the child restraint locking feature will be engaged. This may unintentionally cause the passenger sensing system to turn the airbag off for some adult-sized occupants. If this happens, unbuckle the belt, let the belt go back all the way, and then buckle the belt again without pulling the belt out all the way. 6. Restart the vehicle and have the person remain in this position for two to three minutes after the ON indicator is lit. 71 { Warning If the front outboard passenger airbag is turned off for an adult-sized occupant, the airbag will not be able to inflate and help protect that person in a crash, resulting in an increased risk of serious injury or even death. An adult-sized occupant should not ride in the front outboard passenger seat, if the passenger airbag OFF indicator is lit. Additional Factors Affecting System Operation Seat belts help keep the passenger in position on the seat during vehicle maneuvers and braking, which helps the passenger sensing system maintain the passenger airbag status. See “Seat Belts” and “Child Restraints” in the Index for additional information about the importance of proper restraint use. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 72 Seats and Restraints A thick layer of additional material, such as a blanket or cushion, or aftermarket equipment such as seat covers, seat heaters, and seat massagers can affect how well the passenger sensing system operates. We recommend that you not use seat covers or other aftermarket equipment except when approved by GM for your specific vehicle. See Adding Equipment to the Airbag-Equipped Vehicle 0 72 for more information about modifications that can affect how the system operates. The ON indicator may be lit if an object, such as a briefcase, handbag, grocery bag, laptop, or other electronic device, is put on an unoccupied seat. If this is not desired, remove the object from the seat. { Warning Stowing articles under the passenger seat or between the passenger seat cushion and (Continued) Warning (Continued) Warning (Continued) seatback may interfere with the proper operation of the passenger sensing system. are close to an airbag when it inflates. Avoid yellow connectors. They are probably part of the airbag system. Be sure to follow proper service procedures, and make sure the person performing work for you is qualified to do so. Servicing the Airbag-Equipped Vehicle Airbags affect how the vehicle should be serviced. There are parts of the airbag system in several places around the vehicle. Your dealer and the service manual have information about servicing the vehicle and the airbag system. To purchase a service manual, see Publication Ordering Information 0 353. { Warning For up to 10 seconds after the vehicle is turned off and the battery is disconnected, an airbag can still inflate during improper service. You can be injured if you (Continued) Adding Equipment to the Airbag-Equipped Vehicle Adding accessories that change the vehicle's frame, bumper system, height, front end, or side sheet metal may keep the airbag system from working properly. The operation of the airbag system can also be affected by changing, including improperly repairing or replacing, any parts of the following: . Airbag system, including airbag modules, front or side impact sensors, sensing and diagnostic module, airbag wiring, or front center console Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints . Front seats, including stitching, seams or zippers . Seat belts . Steering wheel, instrument panel, overhead console, ceiling trim, or pillar garnish trim . Inner door seals, including speakers Your dealer and the service manual have information about the location of the airbag modules and sensors, sensing and diagnostic module, and airbag wiring along with the proper replacement procedures. In addition, the vehicle has a passenger sensing system for the front outboard passenger position, which includes sensors that are part of the passenger's seat. The passenger sensing system may not operate properly if the original seat trim is replaced with non-GM covers, upholstery, or trim, or with GM covers, upholstery, or trim designed for a different vehicle. Any object, such as an aftermarket seat heater or a comfort enhancing pad or device, installed under or on top of the seat fabric, could also interfere with the operation of the passenger sensing system. This could either prevent proper deployment of the passenger airbag(s) or prevent the passenger sensing system from properly turning off the passenger airbag(s). See Passenger Sensing System 0 68. If the vehicle has rollover roof-rail airbags, see Different Size Tires and Wheels 0 298 for additional important information. If the vehicle must be modified because you have a disability and you have questions about whether the modifications will affect the vehicle's airbag system, or if you have questions about whether the airbag system will be affected if the vehicle is modified for any other reason, call Customer Assistance. See Customer Assistance Offices 0 346. 73 Airbag System Check The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working. See Airbag Readiness Light 0 120. Caution If an airbag covering is damaged, opened, or broken, the airbag may not work properly. Do not open or break the airbag coverings. If there are any opened or broken airbag coverings, have the airbag covering and/or airbag module replaced. For the location of the airbags, see Where Are the Airbags? 0 63. See your dealer for service. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 74 Seats and Restraints Replacing Airbag System Parts after a Crash { Warning A crash can damage the airbag systems in the vehicle. A damaged airbag system may not properly protect you and your passenger(s) in a crash, resulting in serious injury or even death. To help make sure the airbag systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible. If an airbag inflates, you will need to replace airbag system parts. See your dealer for service. If the airbag readiness light stays on after the vehicle is started or comes on when you are driving, the airbag system may not work properly. Have the vehicle serviced right away. See Airbag Readiness Light 0 120. Child Restraints . Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue. If no, return to the booster seat. . Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, try using the rear seat belt comfort guide, if available. See “Rear Seat Belt Comfort Guides” under Lap-Shoulder Belt 0 57. If a comfort guide is not available, or if the shoulder belt still does not rest on the shoulder, then return to the booster seat. . Does the lap belt fit low and snug on the hips, touching the thighs? If yes, continue. If no, return to the booster seat. . Can proper seat belt fit be maintained for the length of the trip? If yes, continue. If no, return to the booster seat. Older Children Older children who have outgrown booster seats should wear the vehicle’s seat belts. The manufacturer instructions that come with the booster seat state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the fit test below: Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Q: What is the proper way to wear seat belts? A: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. This applies belt force to the child's pelvic bones in a crash. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash. Also see “Rear Seat Belt Comfort Guides” under Lap-Shoulder Belt 0 57. According to accident statistics, children are safer when properly restrained in a rear seating position. In a crash, children who are not buckled up can strike other people who are buckled up, or can be thrown out of the vehicle. Older children need to use seat belts properly. 75 { Warning { Warning Never allow more than one child to wear the same seat belt. The seat belt cannot properly spread the impact forces. In a crash, they can be crushed together and seriously injured. A seat belt must be used by only one person at a time. Never allow a child to wear the seat belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, the child would not be restrained by the shoulder belt. The child could move too far forward increasing the chance of head and neck injury. The child might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 76 Seats and Restraints { Warning Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle. Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck. The shoulder belt can tighten but cannot be loosened if it is locked. The shoulder belt locks when it is pulled all the way out of the retractor. It unlocks when the shoulder belt is allowed to go all the way back into the retractor, but it cannot do this if it is wrapped around a child’s neck. If the shoulder belt is locked and tightened around a child’s neck, the only way to loosen the belt is to cut it. Never leave children unattended in a vehicle and never allow children to play with the seat belts. Every time infants and young children ride in vehicles, they should have the protection provided by appropriate child restraints. Neither the vehicle’s seat belt system nor its airbag system is designed for them. Children who are not restrained properly can strike other people, or can be thrown out of the vehicle. { Warning Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash. For example, in a crash at only 40 km/h (25 mph), a 5.5 kg (12 lb) infant will suddenly become a 110 kg (240 lb) force on a person's arms. An infant or child should be secured in an appropriate child restraint. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Warning (Continued) front passenger seat, always move the front passenger seat as far back as it will go. If a child restraint is installed in the second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag. { Warning Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the front passenger seat. Secure a rear-facing child restraint in a rear seat. It is also better to secure a forward-facing child restraint in a rear seat. If a forward-facing child restraint must be secured in the (Continued) 77 Child restraints are devices used to restrain, seat, or position children in the vehicle and are sometimes called child seats or car seats. There are three basic types of child restraints: . Forward-facing child restraints . Rear-facing child restraints . Belt-positioning booster seats The proper child restraint for your child depends on their size, weight, and age, and also on whether the child restraint is compatible with the vehicle in which it will be used. For each type of child restraint, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the child restraint will have a label saying that it meets federal motor vehicle safety standards. The instruction manual that is provided with the child restraint states the weight and height limitations for that particular child Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 78 Seats and Restraints restraint. In addition, there are many kinds of child restraints available for children with special needs. { Warning To reduce the risk of neck and head injury in a crash, infants and toddlers should be secured in a rear-facing child restraint until age two, or until they reach the maximum height and weight limits of their child restraint. Warning (Continued) the risk of serious or fatal injuries during a crash, young children should always be secured in an appropriate child restraint. Child Restraint Systems { Warning A young child's hip bones are still so small that the vehicle seat belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child's abdomen. In a crash, the belt would apply force on a body area that is unprotected by any bony structure. This alone could cause serious or fatal injuries. To reduce (Continued) The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. Forward-Facing Child Restraint A forward-facing child restraint provides restraint for the child's body with the harness. Rear-Facing Infant Restraint A rear-facing child restraint provides restraint with the seating surface against the back of the infant. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Securing an Add-On Child Restraint in the Vehicle { Warning Booster Seats A belt-positioning booster seat is used for children who have outgrown their forward-facing child restraint. Boosters are designed to improve the fit of the vehicle's seat belt system until the child is large enough for the vehicle seat belts to fit properly without a booster seat. See the seat belt fit test in Older Children 0 74. A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle seat belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual. To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraints must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and Tethers for Children (LATCH System) 0 81 for more information. Children can be endangered in a crash if the child restraint is not properly secured in the vehicle. 79 When securing an add-on child restraint, refer to the following: 1. Instruction labels provided on the child restraint 2. Instruction manual provided with the child restraint 3. This vehicle owner's manual The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it. In some areas Certified Child Passenger Safety Technicians (CPSTs) are available to inspect and demonstrate how to correctly use and install child restraints. In the U.S., refer to the National Highway Traffic Safety Administration (NHTSA) website to locate the nearest child safety seat Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 80 Seats and Restraints inspection station. For CPST availability in Canada, check with Transport Canada or the Provincial Ministry of Transportation office. Securing the Child Within the Child Restraint { Warning A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Secure the child properly following the instructions that came with that child restraint. Where to Put the Restraint According to accident statistics, children and infants are safer when properly restrained in an appropriate child restraint secured in a rear seating position. Whenever possible, children aged 12 and under should be secured in a rear seating position. The vehicle is equipped with a front center airbag in the inboard side of the driver seat. Even with a front center airbag, a child restraint can be installed in any second row seating position. Never put a rear-facing child restraint in the front. This is because the risk to the rear-facing child is so great if the airbag deploys. { Warning A child in a rear-facing child restraint can be seriously injured or killed if the front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front passenger airbag inflates and the passenger seat is in a forward position. (Continued) Warning (Continued) Even if the passenger sensing system has turned off the front passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. Secure rear-facing child restraints in a rear seat, even if the airbag is off. If you secure a forward-facing child restraint in the front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat. See Passenger Sensing System 0 68 for additional information. If a child restraint is installed in a second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints When securing a child restraint with the seat belts in a rear seat position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. Child restraints and booster seats vary considerably in size, and some may fit in certain seating positions better than others. Depending on where you place the child restraint and the size of the child restraint, you may not be able to access adjacent seat belts or LATCH anchors for additional passengers or child restraints. Adjacent seating positions should not be used if the child restraint prevents access to or interferes with the routing of the seat belt. Wherever a child restraint is installed, be sure to follow the instructions that came with the child restraint and secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it. Lower Anchors and Tethers for Children (LATCH System) The LATCH system secures a child restraint during driving or in a crash. LATCH attachments on the child restraint are used to attach the child restraint to the anchors in the vehicle. The LATCH system is designed to make installation of a child restraint easier. 81 In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments. LATCH-compatible rear-facing and forward-facing child seats can be properly installed using either the LATCH anchors or the vehicle’s seat belts. Do not use both the seat belts and the LATCH anchorage system to secure a rear-facing or forward-facing child seat. Booster seats use the vehicle’s seat belts to secure the child and the booster seat. If the manufacturer recommends that the booster seat be secured with the LATCH system, this can be done as long as the booster seat can be positioned properly and there is no interference with the proper positioning of the lap-shoulder belt on the child. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 82 Seats and Restraints Make sure to follow the instructions that came with the child restraint, and also the instructions in this manual. When installing a child restraint with a top tether, you must also use either the lower anchors or the seat belts to properly secure the child restraint. A child restraint must never be attached using only the top tether. For a forward-facing 5-pt harness child restraint where the combined weight of the child and restraint are up to 29.5 kg (65 lb), use either the lower LATCH anchorages with the top tether anchorage, or the seat belt with the top tether anchorage. Where the combined weight of the child and restraint are greater than 29.5 kg (65 lb), use the seat belt with the top tether anchorage only. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints 83 Recommended Methods for Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Up to 29.5 kg (65 lb) Rear-Facing Child Restraint Greater than 29.5 kg (65 lb) Forward-Facing Child Restraint Up to 29.5 kg (65 lb) Forward-Facing Child Restraint Greater than 29.5 kg (65 lb) See Securing Child Restraints (With the Seat Belt in the Rear Seat) 0 91 or Securing Child Restraints (With the Seat Belt in the Front Seat) 0 93. Child restraints built after March 2014 will be labeled with the specific child weight up to which the LATCH system can be used to install the restraint. Use Only Approved Attachment Methods Shown with an X LATCH – Lower Anchors Only X Seat Belt Only LATCH – Lower Anchors and Top Tether Anchor Seat Belt and Top Tether Anchor X X X X X The following explains how to attach a child restraint with these attachments in the vehicle. Not all vehicle seating positions have lower anchors. In this case, the seat belt must be used (with top tether where available) to secure the child restraint. See Securing Child Restraints (With the Seat Belt in the Rear Seat) 0 91 or Securing Child Restraints (With the Seat Belt in the Front Seat) 0 93. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 84 Seats and Restraints Lower Anchors Top Tether Anchor Some child restraints with top tethers are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for your child restraint. Lower Anchor and Top Tether Anchor Locations Lower anchors (1) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (2). A top tether (3, 4) is used to secure the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment hook (2) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash. The child restraint may have a single tether (3) or a dual tether (4). Either will have a single attachment hook (2) to secure the top tether to the anchor. Second Row I : Seating positions with top tether anchors. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints H : Seating positions with two lower anchors. the lower anchor symbol on them, near the crease between the seatback and the seat cushion. 85 The top tether anchors are on the rear of the seatback for each seating position in the second row. Be sure to use an anchor located directly behind the seating position where the child restraint will be placed. To assist in locating the top tether anchors, the top tether anchor symbol is near the anchor. Third Row I : Seating positions with top tether anchors. Third Row The top tether anchors are on the rear of the seatback for each seating position in the third row. To assist in locating the lower anchors, each seating position with lower anchors has two labels with Second Row Be sure to use an anchor located directly behind the seating position where the child restraint will be placed. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 86 Seats and Restraints Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached. According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint 0 80 for additional information. Securing a Child Restraint Designed for the LATCH System { Warning A child could be seriously injured or killed in a crash if the child restraint is not properly attached to the vehicle using either the LATCH anchors or the vehicle seat belt. Follow the instructions (Continued) Warning (Continued) that came with the child restraint and the instructions in this manual. { Warning To reduce the risk of serious or fatal injuries during a crash, do not attach more than one child restraint to a single anchor. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured. { Warning Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck. The (Continued) Warning (Continued) shoulder belt can tighten but cannot be loosened if it is locked. The shoulder belt locks when it is pulled all the way out of the retractor. It unlocks when the shoulder belt is allowed to go all the way back into the retractor, but it cannot do this if it is wrapped around a child’s neck. If the shoulder belt is locked and tightened around a child’s neck, the only way to loosen the belt is to cut it. Buckle any unused seat belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, and tighten the belt behind the child restraint after the child restraint has been installed. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Caution Do not let the LATCH attachments rub against the vehicle’s seat belts. This may damage these parts. If necessary, move buckled seat belts to avoid rubbing the LATCH attachments. Do not fold the rear seatback when the seat is occupied. Do not fold the empty rear seat with a seat belt buckled. This could damage the seat belt or the seat. Unbuckle and return the seat belt to its stowed position, before folding the seat. This vehicle is equipped with a front center airbag in the inboard side of the driver seat. Even with a front center airbag, a child restraint can be installed in any second row seating position. If a child restraint is installed in a second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag. If you need to secure more than one child restraint in the rear seat, see Where to Put the Restraint 0 80. 1. Put the child restraint on the seat. If the head restraint interferes with the proper installation of the child restraint, the head restraint may be removed. See "Head Restraint Removal and Reinstallation" at the end of this section. 2. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the seat belt. Refer to your child restraint manufacturer instructions and the instructions in this manual. 2.1. Find the lower anchors for the desired seating position. 87 2.2. To access the lower anchors in the second row, it may help to recline the seatback. Third row seatbacks must be upright before placing the child restraint on the seat. 2.3. Put the child restraint on the seat. 2.4. Attach and tighten the lower attachments on the child restraint to the lower anchors. If necessary, adjust the angle of the second row seatback to achieve a tight installation. Make sure the second row bench seatbacks are aligned at the same angle. 3. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 88 Seats and Restraints and route the tether under the head restraint and in between the head restraint posts. if the vehicle has one. Refer to the child restraint instructions and the following steps: 3.1. Find the top tether anchor. 3.2. Route, attach, and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using does not have a head restraint and you are using a single tether, route the tether over the seatback. If the position you are using does not have a head restraint and you are using a dual tether, route the tether over the seatback. If the position you are using has an adjustable head restraint and you are using a single tether, raise the head restraint If the position you are using has an adjustable head restraint and you are using a dual tether, raise the head restraint and route the tether around the head restraint posts. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints 89 Head Restraint Removal and Reinstallation The second row outboard head restraints can be removed if they interfere with the proper installation of the child restraint. The third row head restraints cannot be removed. If the position you are using has a fixed head restraint and you are using a single tether, route the tether under the head restraint and in between the head restraint posts or around the outboard side of the head restraint. If the position you are using has a fixed head restraint and you are using a dual tether, route the tether around the head restraint. 4. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement, for proper installation. To remove the head restraint: 1. Partially fold the seatback forward. See Rear Seats 0 48 for additional information. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 90 Seats and Restraints 2. Press both buttons on the head restraint posts at the same time, and pull up on the head restraint. To reinstall the head restraint: { Warning 3. Store the head restraint in the cargo area of the vehicle. 4. When the child restraint is removed, reinstall the head restraint before the seating position is used. { Warning With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly. Replacing LATCH System Parts After a Crash 1. Insert the head restraint posts into the holes in the top of the seatback. The notches on the posts must face the driver side of the vehicle. 2. Push the head restraint down. 3. Try to move the head restraint to make sure that it is locked in place. A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the system inspected and any necessary replacements made as soon as possible. If the vehicle has the LATCH system and it was being used during a crash, new LATCH system parts may be needed. New parts and repairs may be necessary even if the LATCH system was not being used at the time of the crash. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Securing Child Restraints (With the Seat Belt in the Rear Seat) belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH System) 0 81 for top tether anchor locations. The vehicle is equipped with a front center airbag in the inboard side of the driver seat. Even with a front center airbag, a child restraint can be installed in any second row seating position. If you install a child restraint in a second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag. Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top tether must be anchored. When securing a child restraint with the seat belts in a rear seat position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH System) 0 81 for how and where to install the child restraint using LATCH. If a child restraint is secured in the vehicle using a seat In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. If the head restraint interferes with the proper installation of the child restraint, the head restraint may be removed. See "Head Restraint Removal and Reinstallation" under Lower Anchors and Tethers for Children (LATCH System). 2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle seat belt through or around the child restraint. The child restraint instructions will show you how. If the child restraint or vehicle seat position does not have the LATCH system, you will be using the seat belt to secure the child restraint. Be sure to follow the instructions that came with the child restraint. If more than one child restraint needs to be installed in the rear seat, be sure to read Where to Put the Restraint 0 80. 1. Put the child restraint on the seat. 91 3. Push the latch plate into the buckle until it clicks. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 92 Seats and Restraints 6. If the child restraint has a top tether, follow the child restraint manufacturer's instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH System) 0 81. Position the release button on the buckle, away from the child restraint, so that the seat belt could be quickly unbuckled if necessary. 4. Pull the shoulder belt all the way out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor. 5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 4 and 5. 7. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the seat belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement. To remove the child restraint, unbuckle the vehicle seat belt and let it return to the stowed position. If the top tether is attached to a top tether anchor, disconnect it. If the head restraint was removed, reinstall it before the seating position is used. See "Head Restraint Removal and Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints Reinstallation" under Lower Anchors and Tethers for Children (LATCH System) 0 81 for additional information on installing the head restraint properly. Securing Child Restraints (With the Seat Belt in the Front Seat) This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint 0 80. In addition, the vehicle has a passenger sensing system which is designed to turn off the front outboard passenger frontal airbag under certain conditions. See Passenger Sensing System 0 68 and Passenger Airbag Status Indicator 0 121 for more information, including important safety information. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great, if the airbag deploys. 93 { Warning Warning (Continued) A child in a rear-facing child restraint can be seriously injured or killed if the front outboard passenger frontal airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front outboard passenger frontal airbag inflates and the passenger seat is in a forward position. forward-facing child restraint in the front outboard passenger seat, always move the seat as far back as it will go. It is better to secure the child restraint in a rear seat. Even if the passenger sensing system has turned off the front outboard passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. Secure rear-facing child restraints in a rear seat, even if the airbag is off. If you secure a (Continued) See Passenger Sensing System 0 68 for additional information. If the child restraint uses a top tether, see Lower Anchors and Tethers for Children (LATCH System) 0 81 for top tether anchor locations. Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top tether must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 94 Seats and Restraints When using the lap-shoulder belt to secure the child restraint in this position, follow the instructions that came with the child restraint and the following instructions: or around the child restraint. The child restraint instructions will show you how. 1. Move the seat as far back as it will go before securing the forward-facing child restraint. Move the seat upward or the seatback to an upright position, if needed, to get a tight installation of the child restraint. When the passenger sensing system has turned off the front outboard passenger frontal airbag, the OFF indicator on the passenger airbag status indicator should light and stay lit when you start the vehicle. See Passenger Airbag Status Indicator 0 121. 2. Put the child restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle seat belt through 4. Push the latch plate into the buckle until it clicks. Tilt the latch plate to adjust the belt if needed. Position the release button on the buckle, away from the child restraint, so that the seat belt could be quickly unbuckled if necessary. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Seats and Restraints 95 7. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the seat belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement. 5. Pull the shoulder belt all the way out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor. 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 5 and 6. If the airbag is off, the OFF indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. If a child restraint has been installed and the ON indicator is lit, see “If the On Indicator Is Lit for a Child Restraint” under Passenger Sensing System 0 68. To remove the child restraint, unbuckle the vehicle seat belt and let it return to the stowed position. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 96 Storage Storage Storage Compartments Storage Compartments Storage Compartments . . . . . . . . Glove Box . . . . . . . . . . . . . . . . . . . . . Cupholders . . . . . . . . . . . . . . . . . . . . Sunglasses Storage . . . . . . . . . . . Center Console Storage . . . . . . . 96 96 96 97 97 Additional Storage Features Cargo Management System . . . 97 Roof Rack System Roof Rack System . . . . . . . . . . . . . 99 Cupholders { Warning Do not store heavy or sharp objects in storage compartments. In a crash, these objects may cause the cover to open and could result in injury. Glove Box Lift up on the glove box lever to open it. There are cupholders in the center console. Press the access door to open. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Storage Sunglasses Storage Center Console Storage Additional Storage Features Cargo Management System If equipped, sunglasses storage is on the overhead console. Press the fixed button on the cover and release to access. The center console has storage under the armrest. Pull up on the latch, and lift to open. There is a removable organizer on top of the storage bin. The center console also has the following: . A forward bin . An open pass through under the front of the console . If equipped, wireless charging in the front storage bin Lift the load floor to access the cargo management system. 97 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 98 Storage The cargo management system is used to organize storage in the cargo area. There are two convenience hooks that can support up to 5 kg (11 lb). After storing items in the cargo management system, make sure to properly latch the load floor. Removal Procedure The hold open devices on the cargo bin allow the load floor to remain open without removal. To access the spare tire, the cargo management system must be removed. 1. Open the cargo cover. 2. Remove the four wing nuts. 3. Lift up on the cargo management system to access the spare tire. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Storage 4. The cargo management system can be placed on the lowered third row seats while accessing the spare tire. Installation Procedure 1. Install the cargo management system in the vehicle. 2. Install the four wing nuts. 3. Make sure to properly latch the top of the load floor. { Warning An improperly latched cargo cover, or cargo cover left in the open position, could separate during a crash or sudden maneuver potentially impacting vehicle occupants. Someone could be injured. Be sure to return the cover to the closed position and latch before driving. 99 Roof Rack System { Warning If something is carried on top of the vehicle that is longer or wider than the roof rack — like paneling, plywood, or a mattress — the wind can catch it while the vehicle is being driven. The item being carried could be violently torn off, and this could cause a collision and damage the vehicle. Never carry something longer or wider than the roof rack on top of the vehicle unless using a GM certified accessory carrier. If equipped, the roof rack can be used to load items. For roof racks that do not have crossrails included, GM certified crossrails can be purchased as an accessory. See your dealer. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 100 Storage Caution Loading cargo on the roof rack that weighs more than 100 kg (220 lb) or hangs over the rear or sides of the vehicle may damage the vehicle. Do not load cargo exceeding 100 kg (220 lbs) and always load cargo so that it rests evenly between the crossrails and does not block the vehicle lamps or windows. Fasten the cargo securely. To prevent damage or loss of cargo when driving, check to make sure crossrails and cargo are securely fastened. Loading cargo on the roof rack will make the vehicle’s center of gravity higher. Avoid high speeds, sudden starts, sharp turns, sudden braking, or abrupt maneuvers; otherwise it may result in loss of control. If driving for a long distance, on rough roads, or at high speeds, occasionally stop the vehicle to make sure the cargo remains in its place. Do not exceed the maximum vehicle capacity when loading the vehicle. For more information on vehicle capacity and loading, see Vehicle Load Limits 0 177. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Instruments and Controls Controls Steering Wheel Adjustment . . . 102 Steering Wheel Controls . . . . . . 102 Heated Steering Wheel . . . . . . . 102 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Windshield Wiper/Washer . . . . 103 Rear Window Wiper/ Washer . . . . . . . . . . . . . . . . . . . . . 104 Compass . . . . . . . . . . . . . . . . . . . . . 105 Clock . . . . . . . . . . . . . . . . . . . . . . . . . 106 Power Outlets . . . . . . . . . . . . . . . . 106 Wireless Charging . . . . . . . . . . . . 107 Warning Lights, Gauges, and Indicators Warning Lights, Gauges, and Indicators . . . . . . . . . . . . . . . . . . . 110 Instrument Cluster (Base Level) . . . . . . . . . . . . . . . . . . . . . . . 111 Instrument Cluster (Uplevel) . . . . . . . . . . . . . . . . . . . . 114 Speedometer . . . . . . . . . . . . . . . . . 116 Odometer . . . . . . . . . . . . . . . . . . . . . 116 Trip Odometer . . . . . . . . . . . . . . . . 116 Tachometer . . . . . . . . . . . . . . . . . . . 116 Fuel Gauge . . . . . . . . . . . . . . . . . . . 117 Engine Oil Temperature Gauge . . . . . . . . . . . . . . . . . . . . . . 118 Engine Coolant Temperature Gauge . . . . . . . . . . . . . . . . . . . . . . 118 Voltmeter Gauge . . . . . . . . . . . . . . 119 Seat Belt Reminders . . . . . . . . . 120 Airbag Readiness Light . . . . . . . 120 Passenger Airbag Status Indicator . . . . . . . . . . . . . . . . . . . . 121 Charging System Light . . . . . . . 122 Malfunction Indicator Lamp (Check Engine Light) . . . . . . . . 122 Brake System Warning Light . . . . . . . . . . . . . . . . . . . . . . . . 124 Electric Parking Brake Light . . . . . . . . . . . . . . . . . . . . . . . . 124 Service Electric Parking Brake Light . . . . . . . . . . . . . . . . . . . . . . . . 125 Antilock Brake System (ABS) Warning Light . . . . . . . . . . . . . . . 125 Sport Mode Light . . . . . . . . . . . . . 125 Tow/Haul Mode Light . . . . . . . . . 125 Lane Keep Assist (LKA) Light . . . . . . . . . . . . . . . . . . . . . . . . 126 Vehicle Ahead Indicator . . . . . . 126 Pedestrian Ahead Indicator . . . 126 Traction Off Light . . . . . . . . . . . . . 127 StabiliTrak OFF Light . . . . . . . . . 127 101 Traction Control System (TCS)/ StabiliTrak Light . . . . . . . . . . . . . 127 Tire Pressure Light . . . . . . . . . . . 128 Engine Oil Pressure Light . . . . 128 Low Fuel Warning Light . . . . . . 129 Security Light . . . . . . . . . . . . . . . . . 129 High-Beam On Light . . . . . . . . . . 129 Lamps On Reminder . . . . . . . . . 129 Cruise Control Light . . . . . . . . . . 130 Door Ajar Light . . . . . . . . . . . . . . . 130 Information Displays Driver Information Center (DIC) (Base Level) . . . . . . . . . . . . . . . . 130 Driver Information Center (DIC) (Uplevel) . . . . . . . . . . . . . . . . . . . . 133 Vehicle Messages Vehicle Messages . . . . . . . . . . . . 136 Engine Power Messages . . . . . 136 Vehicle Speed Messages . . . . . 137 Vehicle Personalization Vehicle Personalization . . . . . . . 137 Universal Remote System Universal Remote System . . . . 142 Universal Remote System Programming . . . . . . . . . . . . . . . 142 Universal Remote System Operation . . . . . . . . . . . . . . . . . . . 144 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 102 Instruments and Controls Controls Do not adjust the steering wheel while driving. Steering Wheel Adjustment Power Tilt and Telescoping Steering Wheel Steering Wheel Controls The infotainment system can be operated by using the steering wheel controls. See "Steering Wheel Controls" in the infotainment manual. Heated Steering Wheel To adjust the steering wheel: 1. Pull the lever down. 2. Move the steering wheel up or down. To adjust the steering wheel, if equipped: Press the control up or down to tilt the steering wheel up or down. 3. Pull or push the steering wheel closer or away from you. Press the control forward or rearward to move the steering wheel closer or away from you. ( : If equipped, press to turn on or off. A light near the button displays when the feature is turned on. 4. Pull the lever up to lock the steering wheel in place. Do not adjust the steering wheel while driving. The steering wheel takes about three minutes to reach maximum heat. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Automatic Heated Steering Wheel Windshield Wiper/Washer If equipped with remote start, the heated steering wheel will turn on automatically during a remote start along with the heated seats when it is cold outside. The heated steering wheel indicator light may not come on. If equipped with auto heated seats, the heated steering wheel will turn on when the auto heated seat is activated. The heated steering wheel indicator will follow the state of the steering wheel heat. See Heated and Ventilated Front Seats 0 46 and Vehicle Personalization 0 137. Horn Press a on the steering wheel pad to sound the horn. 103 INT : Move the windshield wiper lever to INT. Turn the band up for more frequent wipes or down for less frequent wipes. OFF : Use to turn the wipers off. 1X : For a single wipe, briefly move the wiper lever down. For several wipes, hold the wiper lever down. f : Pull the windshield wiper With the ignition on or in ACC/ ACCESSORY, move the windshield wiper lever to select the wiper speed. HI : Use for fast wipes. LO : Use for slow wipes. lever toward you to spray windshield washer fluid and activate the windshield wipers. The wipers will continue until the lever is released or the maximum wash time is reached. When the windshield wiper lever is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid 0 263 for information on filling the windshield washer fluid reservoir. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 104 Instruments and Controls { Warning In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. { Warning Before driving the vehicle, always clear snow and ice from the hood, windshield, roof, and rear of the vehicle, including all lamps and windows. Reduced visibility from snow and ice buildup could lead to a crash. Clear snow and ice from the wiper blades and windshield before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged blades should be replaced. See Wiper Blade Replacement 0 268. Heavy snow or ice can overload the wiper motor. See Electrical System Overload 0 272. Rear Window Wiper/ Washer Wiper Parking If the ignition is turned off while the wipers are on LO, HI, or INT, they will immediately stop. If the windshield wiper lever is then moved to OFF before the driver door is opened or within 10 minutes, the wipers will restart and move to the base of the windshield. If the ignition is turned off while the wipers are performing wipes due to windshield washing, the wipers continue to run until they reach the base of the windshield. The rear window wiper/washer controls are on the end of the windshield wiper lever. Turn the controls to adjust the setting. OFF : Turns the wiper off. INT : Turns on the rear wiper with a delay between wipes. ON : Turns on the rear wiper. 1 : Push the windshield wiper lever forward to spray washer fluid on the rear window. The wipers will clear the rear window and either Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls stop or return to your preset speed. For more washer cycles, press and hold the lever. The rear window wiper/washer will not operate if the liftgate is open or ajar. If the liftgate is opened while the rear wiper is on, the wiper returns to the parked position and stops. Rear Wiper Arm Assembly Protection When using an automatic car wash, move the rear wiper control to OFF to disable the rear wiper. In some vehicles, if the transmission is in N (Neutral) and the vehicle speed is very slow, the rear wiper will automatically park. The wiper operations return to normal when the transmission is no longer in N (Neutral) or the vehicle speed has increased. Reverse Gear Wipes If the rear wiper control is off, the rear wiper will automatically operate continuously when the vehicle is in R (Reverse) and the front 105 windshield wiper is performing low or high speed wipes. If the rear wiper control is off, the vehicle is in R (Reverse), and the front windshield wiper is performing interval wipes, then the rear wiper automatically performs interval wipes. If equipped, push the windshield wiper lever forward to spray washer fluid on the rear camera lens. The lever returns to its starting position when released. See Rear Camera Mirror 0 32. This feature can be turned on or off. See Vehicle Personalization 0 137. The vehicle may have a compass display on the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak/ Electronic Stability Control (ESC), and vehicle speed information. The windshield washer reservoir is used for the windshield and the rear window. Check the fluid level in the reservoir if either washer is not working. See Washer Fluid 0 263. Rear Camera Washer Compass The compass system is designed to operate for a certain number of miles or degrees of turn before needing a signal from the GPS satellites. When the compass display shows CAL, drive the vehicle for a short distance in an open area where it can receive a GPS signal. The compass system will automatically determine when a GPS signal is restored and provide a heading again. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 106 Instruments and Controls Clock The time and date for the clock can be set using the infotainment system. See “Time/Date” in “System” under “Settings” in the infotainment manual. Power Outlets Power Outlets 12-Volt Direct Current The vehicle has two 12-volt outlets that can be used to plug in electrical equipment, such as a cell phone or MP3 player. The power outlets are located: . Under the front of the center console. . In the rear cargo area. Lift the cover to access the outlet and replace when not in use. { Warning Power is always supplied to the rear cargo power outlet. Do not leave electrical equipment plugged in when the vehicle is not in use because the vehicle could catch fire and cause injury or death. Caution Leaving electrical equipment plugged in for an extended period of time while the ignition is off will drain the battery. Always unplug electrical equipment when not in (Continued) Caution (Continued) use and do not plug in equipment that exceeds the maximum 15 amp rating. Certain accessory plugs may not be compatible with the accessory power outlet and could overload vehicle and adapter fuses. If a problem is experienced, see your dealer. When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment. See Add-On Electrical Equipment 0 246. Caution Hanging heavy equipment from the power outlet can cause damage not covered by the vehicle warranty. The power outlets are designed for accessory power plugs only, such as cell phone charge cords. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Power Outlet 110V/120V Alternating Current If equipped with this power outlet it can be used to plug in electrical equipment that uses a maximum limit of 150 watts. The power outlet is on the rear of the center console. An indicator light on the outlet turns on to show it is in use. The light comes on when the ignition is on, equipment requiring less than 150 watts is plugged into the outlet, and no system fault is detected. The indicator light does not come on when the ignition is off or if the equipment is not fully seated into the outlet. If equipment is connected using more than 150 watts or a system fault is detected, a protection circuit shuts off the power supply and the indicator light turns off. To reset the circuit, unplug the item and plug it back in or turn the Retained Accessory Power (RAP) off and then back on. See Retained Accessory Power (RAP) 0 186. The power restarts when equipment using 150 watts or less is plugged into the outlet and a system fault is not detected. The power outlet is not designed for and may not work properly, if the following are plugged in: . Equipment with high initial peak wattage, such as compressor-driven refrigerators and electric power tools . Other equipment requiring an extremely stable power supply, such as 107 microcomputer-controlled electric blankets and touch sensor lamps . Medical equipment Wireless Charging If equipped, the vehicle has wireless charging in the storage bin at the front of the floor console. The system operates at 145 kHz and wirelessly charges one Qi compatible smartphone. The power output of the system is capable of charging at a rate up to 3 amp (15W), as requested by the compatible smartphone. See Radio Frequency Statement 0 354. { Warning Wireless charging can affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 108 Instruments and Controls The vehicle must be on, in ACC/ ACCESSORY, or Retained Accessory Power (RAP) must be active. The wireless charging feature may not correctly indicate charging when the vehicle is in RAP. See Retained Accessory Power (RAP) 0 186. Warning (Continued) smartphone and allow the object to cool before removing it from the charging pad, to prevent burns. The operating temperature is −20 °C (−4 °F) to 60 °C (140 °F) for the charging system and 0 °C (32 °F) to 35 °C (95 °F) for the smartphone. { Warning Remove all objects from the charging pad before charging your compatible smartphone. Objects, such as coins, keys, rings, paper clips, or cards, between the smartphone and charging pad will become very hot. On the rare occasion that the charging system does not detect an object, and the object gets wedged between the smartphone and charger, remove the (Continued) To charge a compatible smartphone: 1. Remove all objects from the charging pad. The system may not charge if there are any objects on the charging pad. 2. Place the smartphone face up on the charging pad. To maximize the charge rate, ensure the smartphone is fully seated and centered in the holder with nothing under it. A thick smartphone case may prevent the wireless charger from working, or may reduce the charging performance. See your dealer for additional information. 3. The $ will appear on the V on the infotainment display. This indicates that the smartphone is properly positioned and charging. If a smartphone is placed on the charging pad and $ does not display, remove the smartphone from the pad, turn it 180 degrees, and wait three seconds before placing/ aligning the smartphone on the pad again. The smartphone may become warm during charging. This is normal. In warmer temperatures, the speed of charging may be reduced. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Software Acknowledgements Freescale-WCT library Certain Wireless Charging Module product from LG Electronics, Inc. ("LGE") contains the open source software detailed below. Refer to the indicated open source licenses (as are included following this notice) for the terms and conditions of their use. Copyright (c) 2012-2014 Freescale Semiconductor, Inc.. All rights reserved. OSS Notice Information To obtain the source code that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]. This offer is valid for three (3) years from the date on which you purchased the product. 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT 109 NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 110 Instruments and Controls Warning Lights, Gauges, and Indicators Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could prevent injury. Some warning lights come on briefly when the engine is started to indicate they are working. When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do. Waiting to do repairs can be costly and even dangerous. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Instrument Cluster (Base Level) Base Level English, Metric Similar 111 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 112 Instruments and Controls Cluster Menu There is an interactive display area in the center of the instrument cluster. vehicles. Some may be temporarily restricted when the vehicle is off or in ACC/ACCESSORY. . Home Page . Info App. This is where the selected Driver Information Center (DIC) displays can be viewed. See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. . Audio . Navigation . Phone . Options Audio Press h or k to select the Audio menu. In the Audio menu browse for music, select from the favorites, or change the audio source. Use l or g to change the station or go to the next or previous track. Navigation Press h or k to select the Navigation menu. If there is no active route, you can resume the last route and turn the voice prompts on/off. If there is an active route, press V to cancel or resume route guidance or turn the voice prompts on or off. Use the right steering wheel control to open and scroll through the different items and displays. Home Phone Press h or k to change between the cluster applications at the top of the display. The currently selected application will be highlighted. Press l or g within an application to scroll through a list of available application options. Not all applications will be available on all Press h or k to select the Home Page. The home page is a view of information that can be turned on or off by the driver via the Home Page settings in the Options menu. Press h or k to select the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Options Press h or k to select the Options menu. Use l or g to scroll through items in the Options menu. Units : While the Options application is highlighted, press l or g to select Units, then press V to enter the Units menu. If equipped, choose English, Imperial, or metric units by pressing V while the desired item is highlighted. A checkmark will be displayed next to the selected item. Info Pages : While the Options application is highlighted, press g to select Info Pages, then press V to enter the Info or Pages menu. Home Page Options : Select the available elements to display. Not all elements will be available on all vehicles: Speedometer, Active Safety, Speed Sign, Time, Temperature, and Fuel Range. Speed Warning : The Speed Warning display allows the driver to set a speed that they do not want to exceed. While the Options application is highlighted, press l g to select Speed Warning, then press V to enter the Speed or Warning menu. l or g to adjust the value. Press V to set the speed. Press l Software Information : Displays open source software information. 113 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 114 Instruments and Controls Instrument Cluster (Uplevel) Uplevel English Standard Theme, Metric Similar Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Cluster Menu . There is an interactive display area in the center of the instrument cluster. Info App. This is where the selected Driver Information Center (DIC) displays can be viewed. See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. . Audio . Phone . Navigation . Options Audio Use the right steering wheel control to open and scroll through the different items and displays. Press h to access the cluster applications. Use l or g to scroll through the list of available applications. Not all applications will be available on all vehicles. Press V to select the Audio app, then press k to enter the Audio menu. In the Audio menu browse for music, select from the favorites, or change the audio source. Use l or g to change the station or go to the next or previous track. Phone Press V to select the Phone app, then press k to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent 115 calls, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation. Navigation Press V to select the Navigation app, then press k to enter the Navigation menu. If there is no active route, you can resume the last route and turn the voice prompts on/off. If there is an active route, press V to cancel or resume route guidance or turn the voice prompts on or off. Options Press V to select the Options app, then press k to enter the Options menu. Use l or g to scroll through items in the Options menu. Units : Press k while Units is displayed to enter the Units menu. Choose English, Imperial, or metric units by pressing V while the Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 116 Instruments and Controls desired item is highlighted. A checkmark will be displayed next to the selected item. Display Themes : There are two instrument cluster display configurations to choose from: Sport and Touring. Info Pages : Press k while Info Pages is displayed to enter the Info Pages menu and select the items to be displayed in the Info app. See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. Speed Warning : The Speed Warning display allows the driver to set a speed that they do not want to exceed. To set the Speed Warning press k when Speed Warning is displayed. Scroll to set speed and press k. Press Press l or g to adjust the value. V to set the speed. Once the speed is set, this feature can be turned off by pressing V while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed with a chime. The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. Software Information : Displays open source software information. Tachometer Speedometer The tachometer displays the engine speed in revolutions per minute (rpm). The speedometer shows the vehicle's speed in either kilometers per hour (km/h) or miles per hour (mph). Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles. Trip Odometer The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset. For vehicles with the Stop/Start system, when the ignition is on, the tachometer indicates the vehicle status. When pointing to AUTO STOP, the engine is off but the vehicle is on and can move. The engine could auto start at any time. When the indicator points to OFF, the vehicle is off. When the engine is on, the tachometer will indicate the engine’s revolutions per minute (rpm). The tachometer may vary by several hundred rpm’s, during Auto Stop mode, when the engine is shutting off and restarting. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Fuel Gauge English Uplevel English Base Level, Metric Similar When the ignition is on, the fuel gauge indicates about how much fuel is left in the tank. An arrow on the fuel gauge indicates the side of the vehicle the fuel door is on. When the indicator nears empty, the low fuel light comes on. There is a small amount of fuel left, but the fuel tank should be filled soon. Metric Uplevel Here are things that some owners ask about. None of these show a problem with the fuel gauge: 117 . At the service station, the fuel pump shuts off before the gauge reads full. . It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge indicated the tank was half full, but it actually took a little more or less than half the tank's capacity to fill the tank. . The gauge moves a little while turning a corner or speeding up. . The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 118 Instruments and Controls Engine Oil Temperature Gauge Engine Coolant Temperature Gauge English Metric This gauge shows the engine oil temperature. If the gauge pointer moves into the high end, it means that the engine oil has overheated. If the vehicle has been operated under normal driving conditions, pull off the road, stop the vehicle, and turn off the engine as soon as possible. See Engine Oil 0 253. English Base Level, Metric Similar Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls If the pointer moves toward the warning area at the high end of the gauge, the engine is too hot. If the engine coolant has overheated and the vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle, and turn off the engine as soon as possible. See Engine Overheating 0 262. Metric Uplevel English Uplevel This gauge shows the engine coolant temperature. Voltmeter Gauge When the ignition is on, this gauge indicates the battery voltage. 119 When the engine is running, this gauge shows the condition of the charging system. The gauge can transition from a higher to lower or a lower to higher reading. This is normal. If the vehicle is operating outside the normal operating range, the charging system light comes on. See Charging System Light 0 122. Readings outside the normal operating range can also occur when a large number of electrical accessories are operating in the vehicle and the engine is left idling for an extended period. This condition is normal since the charging system is not able to provide full power at engine idle. As engine speeds are increased, this condition should correct itself as higher engine speeds allow the charging system to create maximum power. The vehicle can only be driven for a short time with the readings outside the normal operating range. If the vehicle must be driven, turn off all Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 120 Instruments and Controls accessories, such as the radio and air conditioner, and unplug all chargers and accessories. times if the driver remains or becomes unbuckled while the vehicle is moving. If the passenger seat belt is buckled, neither the chime nor the light comes on. Readings outside the normal operating range indicate a possible problem in the electrical system. Have the vehicle serviced as soon as possible. If the driver seat belt is buckled, neither the light nor the chime comes on. Seat Belt Reminders There is a passenger seat belt reminder light near the passenger airbag status indicator. See Passenger Sensing System 0 68. The front passenger seat belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the seat belt. Driver Seat Belt Reminder Light Passenger Seat Belt Reminder Light There is a driver seat belt reminder light on the instrument cluster. When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their seat belt. Then the light stays on solid until the belt is buckled. This cycle may continue several When the vehicle is started, this light flashes and a chime may come on to remind passengers to fasten their seat belt. Then the light stays on solid until the belt is buckled. This cycle continues several times if the passenger remains or becomes unbuckled while the vehicle is moving. Airbag Readiness Light This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), the passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System 0 61. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Passenger Airbag Status Indicator The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately. The vehicle has a passenger sensing system. See Passenger Sensing System 0 68 for important safety information. The overhead console has a passenger airbag status indicator. { Warning If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away. If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on. When the vehicle is started, the passenger airbag status indicator will light ON and OFF, and the symbols for on and off, for several seconds as a system check. Then, after several more seconds, the status indicator will light either ON or OFF, and either the on or off symbol, to let you know the status of the front outboard passenger frontal airbag. 121 If the word ON, and the on symbol, are lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag is allowed to inflate. If the word OFF, and the off symbol, are lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag. If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service. { Warning If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 122 Instruments and Controls Warning (Continued) away. See Airbag Readiness Light 0 120 for more information, including important safety information. Charging System Light The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. The light turns off when the engine is started. If it does not, have the vehicle serviced by your dealer. If the light stays on, or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery. When this light comes on, the Driver Information Center (DIC) also displays a message. If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner. Malfunction Indicator Lamp (Check Engine Light) This light is part of the vehicle’s emission control on-board diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. The light should come on to show that it is working when the ignition is in Service Mode. See Ignition Positions 0 181. Malfunctions are often indicated by the system before any problem is noticeable. Being aware of the light and seeking service promptly when it comes on may prevent damage. Caution If the vehicle is driven continually with this light on, the emission control system may not work as well, the fuel economy may be lower, and the vehicle may not run smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty. Caution Modifications to the engine, transmission, exhaust, intake, or fuel system, or the use of replacement tires that do not meet the original tire specifications, can cause this light to come on. This could lead to (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Caution (Continued) costly repairs not covered by the vehicle warranty. This could also affect the vehicle’s ability to pass an Emissions Inspection/ Maintenance test. See Accessories and Modifications 0 249. If the light is flashing : A malfunction has been detected that could damage the emission control system and increase vehicle emissions. Diagnosis and service may be required. To help prevent damage, reduce vehicle speed and avoid hard accelerations and uphill grades. If towing a trailer, reduce the amount of cargo being hauled as soon as possible. If the light continues to flash, find a safe place to park. Turn the vehicle off and wait at least 10 seconds before restarting the engine. If the light is still flashing, follow the previous guidelines and see your dealer for service as soon as possible. If the light is on steady : A malfunction has been detected. Diagnosis and service may be required. Check the following: . If fuel has been added to the vehicle using the capless fuel funnel adapter, make sure that it has been removed. See “Filling the Tank with a Portable Gas Can” under Filling the Tank 0 232. The diagnostic system can detect if the adapter has been left installed in the vehicle, allowing fuel to evaporate into the atmosphere. A few driving trips with the adapter removed may turn off the light. . Poor fuel quality can cause inefficient engine operation and poor driveability, which may go away once the engine is warmed up. If this occurs, change the fuel brand. It may require at 123 least one full tank of the proper fuel to turn the light off. See Recommended Fuel 0 231. If the light remains on, see your dealer. Emissions Inspection and Maintenance Programs If the vehicle requires an Emissions Inspection/Maintenance test, the test equipment will likely connect to the vehicle's Data Link Connector (DLC). The DLC is under the instrument panel to the left of the steering wheel. Connecting devices that are not used to perform an Emissions Inspection/Maintenance test or to service the vehicle may affect vehicle operation. See Add-On Electrical Equipment 0 246. See your dealer if assistance is needed. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 124 Instruments and Controls The vehicle may not pass inspection if: . The light is on when the engine is running. . The light does not come on when the ignition is in Service Mode. . Critical emission control systems have not been completely diagnosed. If this happens, the vehicle would not be ready for inspection and might require several days of routine driving before the system is ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down, or if the vehicle has been recently serviced. See your dealer if the vehicle will not pass or cannot be made ready for the test. Brake System Warning Light Metric English This light should come on briefly when the vehicle is turned on. If it does not come on then, have it fixed so it will be ready to warn you if there is a problem. If the light comes on and stays on at start up, there is a brake problem. Have the brake system inspected right away. If the light comes on while driving, pull off the road and stop carefully. The brake pedal might be harder to push, or the brake pedal may go closer to the floor. It could take longer to stop. If the light is still on, have the vehicle towed for service. See Towing the Vehicle 0 313. { Warning The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service. Electric Parking Brake Light Metric English This light comes on when the parking brake is applied. If the light continues flashing after the parking brake is released, or while driving, there is a problem with the Electric Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Parking Brake system. A message may also display in the Driver Information Center (DIC). Antilock Brake System (ABS) Warning Light If the light does not come on, or remains flashing, see your dealer. 125 If both the ABS warning light and the brake system warning light are on, ABS is not functioning and there is a problem with the regular brakes. See your dealer for service. See Brake System Warning Light 0 124. Service Electric Parking Brake Light Sport Mode Light This warning light should come on briefly when the vehicle is turned on. If the light does not come on, have it fixed so it will be ready to warn if there is a problem. This light should come on briefly when starting the vehicle. If it does not come on, have it fixed so it will be ready to warn if there is a problem. If this light stays on, take the vehicle to your dealer as soon as possible. See the information for the Electric Parking Brake under Electric Parking Brake 0 198. A message may also display in the Driver Information Center (DIC). If the light comes on while driving, safely stop as soon as it is possible and turn off the vehicle. Then turn on the vehicle again to reset the system. If the ABS warning light stays on, or comes on again while driving, the vehicle needs service. A chime may also sound when the light stays on. If the ABS warning light is the only light on, the vehicle has regular brakes, but ABS is not functioning. This light comes on when Sport Mode is selected. See Driver Mode Control 0 202. Tow/Haul Mode Light Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 126 Instruments and Controls For vehicles with the Tow/Haul Mode feature, this light comes on when the Tow/Haul Mode has been activated. This light flashes amber as a Lane Departure Warning (LDW) alert, to indicate that the lane marking has been crossed. See Tow/Haul Mode 0 196. LKA will not assist or alert if the turn signal is active in the direction of lane departure, or if LKA detects that you are accelerating, braking, or actively steering. Lane Keep Assist (LKA) Light See Lane Keep Assist (LKA) 0 229. Vehicle Ahead Indicator LKA may assist by gently turning the steering wheel if the vehicle approaches a detected lane marking. The LKA light is amber when assisting. If equipped, this light indicates the following gap setting (near, medium, or far) for FCA, and, if equipped, Adaptive Cruise Control (ACC). Pedestrian Ahead Indicator After the vehicle is started, this light turns off and stays off if LKA has not been turned on or is unavailable. This light is green if LKA is turned on and is ready to assist. FCA/ACC Following Gap Light If equipped, this indicator will display green when a vehicle is detected ahead and amber when you are following a vehicle ahead much too closely. See Forward Collision Alert (FCA) System 0 221. If equipped, this indicator will display amber when a nearby pedestrian is detected in front of the vehicle. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls See Front Pedestrian Braking (FPB) System 0 224. Traction Off Light If the TCS is off, wheel speed will be limited when necessary to protect the driveline from damage. Adjust driving accordingly. See Traction Control/Electronic Stability Control 0 200. StabiliTrak OFF Light This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak/ Electronic Stability Control (ESC) button. This light and the StabiliTrak OFF light come on when StabiliTrak/ESC is turned off. This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak/Electronic Stability Control (ESC) system is turned off. If StabiliTrak/ESC is off, the Traction Control System (TCS) is also off. If StabiliTrak/ESC and TCS are off, the system does not assist in controlling the vehicle. Turn on the 127 TCS and the StabiliTrak/ESC systems, and the warning light turns off. See Traction Control/Electronic Stability Control 0 200. Traction Control System (TCS)/StabiliTrak Light This light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light is on and not flashing, the TCS and potentially the StabiliTrak/ ESC system have been disabled. A Driver Information Center (DIC) message may display. Check the DIC messages to determine which Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 128 Instruments and Controls feature(s) is no longer functioning and whether the vehicle requires service. If the light is on and flashing, the TCS and/or the StabiliTrak/ESC system is actively working. See Traction Control/Electronic Stability Control 0 200. Tire Pressure Light For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS. When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also display. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure 0 288. When the Light Flashes First and Then Is On Steady If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation 0 291. Engine Oil Pressure Light Oil pressure can vary with engine speed, outside temperature, and oil viscosity. On some models, the oil pump will vary engine oil pressure according to engine needs. Oil pressure may change quickly as the engine speed or load varies. This is normal. If the oil pressure warning light or Driver Information Center (DIC) message indicates oil pressure outside the normal operating range, check the vehicle's oil as soon as possible. Caution Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer. Low Fuel Warning Light Security Light It also comes on when the fuel tank is low on fuel. The light turns off when fuel is added. If it does not, have the vehicle serviced. This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer 0 148. IntelliBeam Light The security light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system. See Immobilizer Operation 0 29. This light is near the fuel gauge and comes on briefly when the ignition is turned on as a check to show it is working. 129 High-Beam On Light This light comes on when the IntelliBeam system, if equipped, is enabled. See Exterior Lamp Controls 0 146. Lamps On Reminder Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 130 Instruments and Controls This light comes on when the exterior lamps are in use, except when only the Daytime Running Lamps (DRL) are active. See Exterior Lamp Controls 0 146. This light is white when the Adaptive Cruise Control (ACC, if equipped) is on and ready, and turns green when the ACC is set and active. See Adaptive Cruise Control 0 206. Information Displays Cruise Control Light Door Ajar Light The DIC displays are shown in the center of the instrument cluster in the Info app. See Instrument Cluster (Base Level) 0 111 or Instrument Cluster (Uplevel) 0 114. The displays show the status of many vehicle systems. The cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active. This light comes on when a door is open or not securely latched. Before driving, check that all doors are properly closed. Driver Information Center (DIC) (Base Level) See Cruise Control 0 203. Adaptive Cruise Control Light l or g : Press to move up or down in a list. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls h or k : Press to move between the DIC Info Pages interactive display zones in the cluster. The following is the list of all possible DIC info page displays. Some may not be available for your particular vehicle. Some items may not be turned on by default but can be turned on through the Options app. See “DIC Info Page Options” earlier in this section. V : Press to open a menu or select a menu item. Press and hold to reset values on certain screens. DIC Info Page Options The info pages on the DIC can be turned on or off through the Options menu. 1. Press h or k to scroll to the Options application. 2. Scroll to Info Page Options and press V. 3. Press l or g to move through the list of possible information displays. 4. Press V while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it. Speed : Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph). If equipped, press k to open the menu and select to display speed limit signs. Trip A or Trip B : Shows the current distance traveled, in either kilometers (km) or miles (mi), since the trip odometer was last reset. This also shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy 131 that the vehicle has right now, and will change as driving conditions change. Press and hold V while this display is active to reset the trip odometer and the average fuel economy. Trip A and Trip B can also be reset by pressing k and choosing reset. Fuel Range : Shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. Remaining Oil Life : Shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 132 Instruments and Controls When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. See Engine Oil 0 253. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended. See Maintenance Schedule 0 328. Tire Pressure : Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System 0 290 and Tire Pressure Monitor Operation 0 291. The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold V for several seconds while the Oil Life display is active. See Engine Oil Life System 0 255. Instantaneous Fuel Economy : Displays the current fuel economy in liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change. This display cannot be reset. Average Vehicle Speed : Displays the average vehicle speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is based on the various vehicle speeds recorded since the last reset. Reset the average speed by pressing V when it is displayed. Fuel Economy : The center displays the approximate instantaneous fuel economy as a number and bar graph. Displayed above the bar graph is a running average of fuel economy for the most recently traveled selected distance. Displayed below the bar graph is the best average fuel economy that has been achieved for the selected distance. The selected distance is displayed at the top of the page as “last xxx mi/km.” k to select the distance or reset best value. Use l and g to choose the distance and press V. Press l and g to select “Reset Best Score.” Press V to reset the Press best average fuel economy. After reset, the best value displays “-,-” until the selected distance has been traveled. The display provides information on how current driving behavior affects the running average and how well Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls recent driving compares to the best that has been achieved for the selected distance. Economy Trend : Shows history of the Average Fuel Economy from the last 50 km (30 mi). Each bar represents about 5 km (3 mi) of driving. During driving the bars will shift to always reflect the most recent distance on the right side. Press and hold V to clear the graph or press k to reset through the menu. ECO Index : Provides feedback on the efficiency of current driving behavior. The bar graph shows a value that is based on current fuel consumption compared to what is expected from the vehicle with good and bad driving habits. Timer : This display can be used as a timer. To start the timer, press V while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press V briefly while this display is active and the timer is running. To reset the timer to zero, press and hold V while this display is active, or press k and select reset. Speed Limit : Shows sign information, which comes from a roadway database in the on-board navigation, if equipped. 133 Driver Information Center (DIC) (Uplevel) The DIC displays are shown in the center of the instrument cluster in the Info app. See Instrument Cluster (Base Level) 0 111 or Instrument Cluster (Uplevel) 0 114. The displays show the status of many vehicle systems. Battery Voltage : Displays the current battery voltage, if equipped. Battery voltage changes are normal while driving. See Charging System Light 0 122. If there is a problem with the battery charging system, the DIC will display a message. Transmission Fluid Temperature : Shows the temperature of the automatic transmission fluid in either degrees Celsius (°C) or degrees Fahrenheit (°F). Blank Page : Shows no information. l or g : Press to move up or down in a list. h or k : Press to move between the interactive display zones in the cluster. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 134 Instruments and Controls V : Press to open a menu or select a menu item. Press and hold to reset values on certain screens. DIC Info Page Options The info pages on the DIC can be turned on or off through the Options menu. 1. Press h to access the cluster applications. 2. Press l or g to scroll to the Options application. 3. Press V to enter the Options menu. 4. Scroll to Info Pages and press k. 5. Press l or g to move through the list of possible information displays. 6. Press V while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it. DIC Info Pages The following is the list of all possible DIC info page displays. Some may not be available for your particular vehicle. Some items may not be turned on by default but can be turned on through the Options app. See “DIC Info Page Options” earlier in this section. Speed : Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph). The vehicle odometer is also shown on this page. Trip A or Trip B, Average Fuel Economy, and Average Speed : Shows the current distance traveled, in either kilometers (km) or miles (mi), since the trip odometer was last reset. The Average Fuel Economy display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The Average Speed display shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. Press and hold V while this display is active to reset the trip odometer, the average fuel economy, and the average speed. Or press select reset in the menu. k and Fuel Range and Instantaneous Fuel Economy : Shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. The Instantaneous Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Fuel Economy display shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change. Timer and Fuel Used : Can be used as a timer. To start the timer, press V while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press V briefly while this display is active and the timer is running. To reset the timer to zero, press and hold V while this display is active. This also shows the number of liters (L) or gallons (gal) of fuel used since the last reset of this menu item. Oil Life : Shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. See Engine Oil 0 253. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended. See Maintenance Schedule 0 328. The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold V for several seconds while the Oil Life display is active. See Engine Oil Life System 0 255. 135 Tire Pressure : Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System 0 290 and Tire Pressure Monitor Operation 0 291. Best Fuel Economy : Displays average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy. k to change the selected distance. Press and hold V while Press this display is active to reset the best fuel economy and average fuel economy. This display can also be reset by selecting reset in the menu. Economy Trend : Shows history of the Average Fuel Economy from the last 50 km (30 mi). Each bar represents about 5 km (3 mi) of driving. During driving the bars will shift to always reflect the most Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 136 Instruments and Controls recent distance on the right side. Press and hold V to clear the graph or press k to reset through the menu. Speed Signs : Shows sign information, which comes from a roadway database in the on-board navigation. Following Distance : The following distance to a moving vehicle ahead is displayed as a time value on this page. See Forward Collision Alert (FCA) System 0 221. Blank Page : Shows no information. Vehicle Messages Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another. The messages that do not require immediate action can be acknowledged and cleared by pressing V. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously; clearing the message does not correct the problem. If a SERVICE message appears, see your dealer. Follow the instructions given in the messages. The system displays messages regarding the following topics: . Service Messages . Fluid Levels . Vehicle Security . Brakes . Steering . Ride Control Systems . Driver Assistance Systems . Cruise Control . Lighting and Bulb Replacement . Wiper/Washer Systems . Doors and Windows . Seat Belts . Airbag Systems . Engine and Transmission . Tire Pressure . Battery Engine Power Messages ENGINE POWER IS REDUCED This message displays when the vehicle's propulsion power is reduced. A reduction in propulsion power can affect the vehicle's ability to accelerate. If this message is on, but there is no observed reduction in performance, proceed to your destination. The performance may Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls be reduced the next time the vehicle is driven. The vehicle may be driven while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible. Under certain operating conditions, propulsion will be disabled. Try restarting after the vehicle has been off for 30 seconds. Vehicle Speed Messages SPEED LIMITED TO XXX KM/H (MPH) This message shows that the vehicle speed has been limited to the speed displayed. The limited speed is a protection for various propulsion and vehicle systems, such as lubrication, thermal, brakes, suspension, Teen Driver if equipped, or tires. Vehicle Personalization The following are all possible vehicle personalization features. Depending on the vehicle, some may not be available. For System, Apps, and Personal features and functions, see “Settings” in the infotainment manual. To access the vehicle personalization menu: 1. Touch the Settings icon on the Home Page of the infotainment display. The menu may contain the following: Rear Seat Reminder This allows for a chime and a message when the rear door has been opened before or during operation of the vehicle. Touch Off or On. Climate and Air Quality Touch and the following may display: . Auto Fan Speed . Auto Cooled Seats . Auto Heated Seats 2. Touch Vehicle to display a list of available options. . Auto Defog . 3. Touch to select the desired feature setting. Auto Rear Defog . Ionizer 4. Touch 9 or R to turn a feature off or on. 5. Touch z to go to the top level of the Settings menu. 137 Auto Fan Speed This setting specifies the amount of airflow when the climate control fan setting is Auto Fan. Touch Low, Medium, or High. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 138 Instruments and Controls Auto Cooled Seats Auto Rear Defog Alert Type This setting automatically turns on and regulates the ventilated seats when the cabin temperature is warm. See Heated and Ventilated Front Seats 0 46. This setting automatically turns the rear defogger on when the engine is started. This setting specifies the type of vehicle feedback provided, either a beep or seat vibration, when you are in danger of colliding with an object. Touch Off or On. Ionizer Auto Heated Seats This setting automatically turns on and regulates the heated seats when the cabin temperature is cool. The auto heated seats can be turned off by using the heated seat buttons on the center stack. See Heated and Ventilated Front Seats 0 46. If equipped with Auto Heated Steering Wheel, this feature will turn on when the Auto Heated Seats turn on. Touch Off or On. If equipped and on, this feature helps to clean the air inside the vehicle and remove contaminants such as pollen, odors, and dust. See Dual Automatic Climate Control System 0 156. Touch Off or On. Collision / Detection Systems Touch and the following may display: . Alert Type Touch Beeps or Safety Alert Seat. Forward Collision System This setting controls the vehicle response when detecting a vehicle ahead of you. The Off setting disables all FCA and AEB functions. With the Alert and Brake setting, both FCA and AEB are available. The Alert setting disables AEB. See Automatic Emergency Braking (AEB) 0 223. Touch Off, Alert, or Alert and Brake. . Forward Collision System Front Pedestrian Detection Touch Off or On. . Front Pedestrian Detection Auto Defog . Rear Cross Traffic Alert This setting automatically turns the front defogger on when the engine is started. . Adaptive Cruise Go Notifier This feature may help avoid or reduce the harm caused by front-end crashes with nearby pedestrians. . Lane Change Alert Touch Off or On. See Front Pedestrian Braking (FPB) System 0 224. Select Off, Alert, or Alert and Brake. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Rear Cross Traffic Alert This setting specifies if an alert will display when the vehicle detects approaching rear cross traffic when in R (Reverse). See Assistance Systems for Parking or Backing 0 216. Touch Off or On. Adaptive Cruise Go Notifier This setting determines if an alert will appear when Adaptive Cruise Control brings the vehicle to a complete stop and the vehicle ahead of you starts moving again. See Adaptive Cruise Control 0 206. Touch Off or On. Lane Change Alert This setting specifies if an alert will display on the outside mirror to help you avoid crashing into a vehicle in your blind spot, or rapidly approaching your blind spot, during a lane change maneuver. See Lane Change Alert (LCA) 0 227. When Lane Change Alert is disabled, Side Blind Zone Alert is also disabled. Touch Off or On. Comfort and Convenience Touch and the following may display: . Chime Volume . Hands Free Liftgate Control . Reverse Tilt Mirror . Remote Mirror Folding . Auto Wipe in Reverse Gear Chime Volume This setting determines the chime volume level. Touch the controls on the infotainment display to adjust the volume. Hands Free Liftgate Control The liftgate may be operated with a kicking motion under the left corner of the rear bumper. See Liftgate 0 21. 139 Select Off, On-Open and Close, or On-Open Only. Reverse Tilt Mirror When on, both the driver and passenger, driver, or passenger outside mirrors will tilt downward when the vehicle is shifted to R (Reverse) to improve visibility of the ground near the rear wheels. They will return to their previous driving position when the vehicle is shifted out of R (Reverse) or the engine is turned off. See Reverse Tilt Mirrors 0 31. Touch Off, On - Driver and Passenger, On - Driver, or On Passenger. Remote Mirror Folding When on, the outside mirrors will automatically fold or unfold when the Remote Keyless Entry (RKE) transmitter Q or K button is pressed and held. See Folding Mirrors 0 30. Touch Off or On. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 140 Instruments and Controls Auto Wipe in Reverse Gear Power Door Locks Remote Lock, Unlock, Start When on and the front wiper is on, the rear wiper will automatically activate when the vehicle is shifted to R (Reverse). Touch and the following may display: . Open Door Anti Lock Out Touch and the following may display: . Remote Unlock Light Feedback . Auto Door Unlock . Remote Lock Feedback . Delayed Door Lock . Remote Door Unlock Open Door Anti Lock Out . Remote Start Auto Cool Seats This setting prevents the vehicle from being locked while a door is open. If this setting is on, the Delayed Door Lock menu will not be available. . Remote Start Auto Heat Seats . Remote Window Operation . Passive Door Unlock . Passive Door Lock Touch Off or On. . Remote Left in Vehicle Alert Auto Door Unlock Remote Unlock Light Feedback This setting allows selection of which doors will automatically unlock when the vehicle is shifted into P (Park). This setting flashes the exterior lamps when the vehicle is unlocked with the RKE transmitter. Select Off or On. Lighting Touch and the following may display: . Vehicle Locator Lights . Exit Lighting Vehicle Locator Lights This setting flashes the headlamps of your vehicle when you press K on the Remote Keyless Entry (RKE) transmitter. Touch Off or On. Exit Lighting This setting specifies how long the headlamps stay on after the vehicle is turned off and exited. Touch Off, 30 Seconds, 60 Seconds, or 120 Seconds. Touch Off, All Doors, or Driver Door. Delayed Door Lock This setting will lock the vehicle a short time after all doors are closed. Touch Off or On. Touch Off or Flash Lights. Remote Lock Feedback This setting specifies how the vehicle responds when the vehicle is locked with the RKE transmitter. Touch Off, Lights and Horn, Lights Only, or Horn Only. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls 141 Remote Door Unlock Remote Window Operation Remote Left in Vehicle Alert This setting specifies whether all doors, or just the driver door, unlock when pressing K on the RKE transmitter. If equipped, this feature enables remote operation of the windows with the RKE transmitter. See Remote Keyless Entry (RKE) System Operation 0 8. This feature sounds an alert when the RKE transmitter is left in the vehicle. This menu also enables Remote No Longer in Vehicle Alert. Touch All Doors or Driver Door. Remote Start Auto Cool Seats This setting automatically turns on the ventilated seats when using the remote start function on warm days. See Heated and Ventilated Front Seats 0 46 and Remote Vehicle Start 0 15. Touch Off or On. Passive Door Unlock This setting specifies which doors unlock when using the button on the driver door handle to unlock the vehicle. Touch Off or On. Touch Off, All Doors or Driver Door Only. Remote Start Auto Heat Seats Passive Door Lock This setting automatically turns on the heated seats when using the remote start function on cold days. See Heated and Ventilated Front Seats 0 46 and Remote Vehicle Start 0 15. This setting specifies if the vehicle will automatically lock, or lock and provide an alert after all the doors are closed, and you walk away from the vehicle with the RKE transmitter. See Remote Keyless Entry (RKE) System Operation 0 8. If equipped with Auto Heated Steering Wheel, this feature will turn on when the Remote Start Auto Heated Seats turn on. Touch Off or On. Touch Off, On with Horn Chirp, or On. Touch Off or On. Seating Position Touch and the following may display: . Seat Entry Memory . Seat Exit Memory Seat Entry Memory This feature automatically recalls the previously stored 1 or 2 button positions when the vehicle is changed from off to on or ACC/ ACCESSORY. See Memory Seats 0 43. Touch Off or On. Seat Exit Memory This feature automatically recalls the previously stored exit button positions when the vehicle is changed from on or ACC/ Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 142 Instruments and Controls ACCESSORY to off if the driver door is open or opened. See Memory Seats 0 43. Universal Remote System instructions refer to a garage door opener, but can be used for other devices. Touch Off or On. See Radio Frequency Statement 0 354. Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Teen Driver See “Teen Driver” under “Settings” in the infotainment manual. Universal Remote System Programming Valet Mode Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process. This will lock the infotainment system and steering wheel controls. It may also limit access to vehicle storage locations, if equipped. To enable valet mode: 1. Enter a four-digit code on the keypad. 2. Touch Enter to go to the confirmation screen. 3. Re-enter the four-digit code. Touch Lock or Unlock to lock or unlock the system. Touch Back to go back to the previous menu. If equipped, these buttons are in the overhead console. This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. These Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated. See “Erasing Universal Remote System Buttons” later in this section. To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal. Programming the Universal Remote System For questions or programming help, see www.homelink.com/gm or call 1-800-355-3515. Programming involves time-sensitive actions, and may time out causing the procedure to be repeated. To program up to three devices: 1. Hold the end of the hand-held transmitter about 3 to 8 cm (1 to 3 in) away from the Universal Remote system buttons with the indicator light in view. The hand-held transmitter was supplied by the manufacturer of the garage door opener receiver. 2. At the same time, press and hold both the hand-held transmitter button and one of the three Universal Remote second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the light stays on or the garage door moves, programming is complete. system buttons to be used to operate the garage door. Do not release either button until the indicator light changes from a slow to a rapid flash. Then release both buttons. Some garage door openers may require substitution of Step 2 with the procedure under “Radio Signals for Some Gate Operators” later in this section. 3. Press and hold the newly programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation. . If the indicator light stays on continuously or the garage door moves when the button is pressed, then programming is complete. There is no need to complete Steps 4–6. . If the indicator light does not come on or the garage door does not move, a 143 . If the indicator light blinks rapidly for two seconds, then changes to a solid light and the garage door does not move, continue with programming Steps 4–6. Learn or Smart Button 4. After completing Steps 1–3, locate the Learn or Smart button inside the garage on the garage door opener receiver. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 144 Instruments and Controls The name and color of the button may vary by manufacturer. 5. Press and release the Learn or Smart button. Step 6 must be completed within 30 seconds of pressing this button. 6. Inside the vehicle, press and hold the newly programmed Universal Remote system button for two seconds and then release it. If the garage door does not move or the lamp on the garage door opener receiver does not flash, press and hold the same button a second time for two seconds, then release it. Again, if the door does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release it. The Universal Remote system should now activate the garage door. Repeat the process for programming the two remaining buttons. rapidly. Proceed with Step 3 under “Programming the Universal Remote System” to complete. Radio Signals for Some Gate Operators Universal Remote System Operation For questions or programming help, see www.homelink.com/gm or call 1-800-355-3515. Some radio–frequency laws and gate operators require transmitter signals to time out or quit after several seconds of transmission. This may not be long enough for the Universal Remote system to pick up the signal during programming. If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following: Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted. Erasing Universal Remote System Buttons Erase all programmed buttons when vehicle ownership is terminated. To erase: 1. Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds. 2. Release both buttons. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Instruments and Controls Reprogramming a Single Universal Remote System Button To reprogram any of the system buttons: 1. Press and hold any one of the buttons. Do not release the button. 2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.” 145 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 146 Lighting Lighting Lighting Features Exterior Lighting Exterior Lamp Controls . . . . . . . 146 Exterior Lamps Off Reminder . . . . . . . . . . . . . . . . . . . 148 Headlamp High/Low-Beam Changer . . . . . . . . . . . . . . . . . . . . 148 Flash-to-Pass . . . . . . . . . . . . . . . . 148 Daytime Running Lamps (DRL) . . . . . . . . . . . . . . . 149 Automatic Headlamp System . . . . . . . . . . . . . . . . . . . . . . 149 Hazard Warning Flashers . . . . . 150 Turn and Lane-Change Signals . . . . . . . . . . . . . . . . . . . . . . 150 152 153 153 153 Exterior Lighting Exterior Lamp Controls 154 The exterior lamp control is on the instrument panel to the left of the steering column. There are four positions. Interior Lighting Instrument Panel Illumination Control . . . . . . . . . . . . . . . . . . . . . . Courtesy Lamps . . . . . . . . . . . . . . Dome Lamps . . . . . . . . . . . . . . . . . Reading Lamps . . . . . . . . . . . . . . Entry Lighting . . . . . . . . . . . . . . . . Exit Lighting . . . . . . . . . . . . . . . . . . Battery Load Management . . . Battery Power Protection . . . . . Exterior Lighting Battery Saver . . . . . . . . . . . . . . . . . . . . . . . 151 151 151 151 O : Turns the exterior lamps off and deactivates the AUTO mode. Turn O again to reactivate the AUTO mode. In Canada, the headlamps will automatically reactivate when the vehicle is shifted out of P (Park). AUTO : Turns the exterior lamps on and off automatically depending on outside lighting. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Lighting ; : Turns on the parking lamps including all lamps, except the headlamps. Turning On and Enabling IntelliBeam 5 : Turns on the headlamps together with the parking lamps and instrument panel lights. IntelliBeam System If equipped, this system turns the vehicle's high-beam headlamps on and off according to surrounding traffic conditions. The system turns the high-beam headlamps on when it is dark enough and there is no other traffic present. To enable the IntelliBeam system, press b on the turn signal lever when it is dark outside and the exterior lamp control is in AUTO or 5. Driving with IntelliBeam The system only activates the high beams when driving over 40 km/h (25 mph). This light comes on in the instrument cluster when the IntelliBeam system is enabled. The blue high-beam on light appears on the instrument cluster when the high beams are on. There is a sensor near the top center of the windshield that automatically controls the system. 147 Keep this area of the windshield clear of debris to allow for best system performance. The high-beam headlamps remain on, under the automatic control, until one of the following situations occurs: . The system detects an approaching vehicle's headlamps. . The system detects a preceding vehicle's taillamps. . The outside light is bright enough that high-beam headlamps are not required. . The vehicle's speed drops below 20 km/h (12 mph). . The IntelliBeam system is disabled by the button on the turn signal lever. If this happens, press b on the turn signal lever when the exterior lamp control is in the AUTO or 5 position to reactivate the IntelliBeam system. The instrument cluster Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 148 Lighting light will come on to indicate the IntelliBeam system is reactivated. The high beams may not turn off automatically if the system cannot detect another vehicle's lamps because of any of the following: . The other vehicle's lamps are missing, damaged, obstructed from view, or otherwise undetected. . The other vehicle's lamps are covered with dirt, snow, and/or road spray. . The other vehicle's lamps cannot be detected due to dense exhaust, smoke, fog, snow, road spray, mist, or other airborne obstructions. . The vehicle's windshield is dirty, cracked, or obstructed by something that blocks the view of the light sensor. . The vehicle is loaded such that the front end points upward, causing the light sensor to aim high and not detect headlamps and taillamps. . The vehicle is being driven on winding or hilly roads. The IntelliBeam system may need to be disabled if any of the above conditions exist. Exterior Lamps Off Reminder A warning chime sounds if the driver door is opened while the ignition is off and the exterior lamps are on. Headlamp High/ Low-Beam Changer Push the turn signal lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release. This indicator light turns on in the instrument cluster when the high-beam headlamps are on. Flash-to-Pass This feature is used to signal to the vehicle ahead that you want to pass. If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high beams. Release the lever to turn the high-beam headlamps off. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Lighting Daytime Running Lamps (DRL) Automatic Headlamp System DRL can make it easier for others to see the front of your vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada. When the exterior lamp control is set to AUTO and it is dark enough outside, the headlamps come on automatically. The dedicated DRL will come on when all of the following conditions are met: . The ignition is on. . The exterior lamp control is in AUTO. . The light sensor determines it is daytime. . The parking brake is released or the vehicle is not in P (Park). The taillamps, instrument panel lights, and other lamps will not be on. The DRL turn off when the headlamps are turned to O or the ignition is off. For vehicles sold in Canada, this control only works when the vehicle is parked. 149 If the vehicle is started in a dark garage, the automatic headlamp system comes on immediately. If it is light outside when the vehicle leaves the garage, there is a slight delay before the automatic headlamp system changes to the Daytime Running Lamps (DRL). During that delay, the instrument cluster may not be as bright as usual. Make sure the instrument panel brightness control is in the full bright position. See Instrument Panel Illumination Control 0 151. When it is bright enough outside, the headlamps will turn off or may change to DRL. There is a light sensor on top of the instrument panel. Do not cover the sensor; otherwise the headlamps will come on when they are not needed. The system may also turn on the headlamps when driving through a parking garage or tunnel. The automatic headlamp system turns off when the exterior lamp control is turned to O or the ignition is off. Lights On with Wipers If the windshield wipers are activated in daylight with the engine on, and the exterior lamp control is in AUTO, the headlamps, parking lamps, and other exterior lamps come on. The transition time for the Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 150 Lighting lamps coming on varies based on wiper speed. When the wipers are not operating, these lamps turn off. Move the exterior lamp control to O or ; to disable this feature. Turn and Lane-Change Signals Hazard Warning Flashers Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. If the lever is moved momentarily to the lane change position, the arrow will flash three times. It will flash six times if Tow/Haul Mode is active. The lever returns to its starting position when it is released. Move the lever all the way up or down to signal a turn. An arrow on the instrument cluster will flash in the direction of the turn or lane change. | : Press to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press | again to turn the flashers off. If after signaling a turn or lane change, the arrow flashes rapidly or does not come on, a signal bulb may be burned out. Have any burned out bulbs replaced. If a bulb is not burned out, check the fuse. See Instrument Panel Fuse Block 0 277. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Lighting Interior Lighting Instrument Panel Illumination Control Courtesy Lamps The courtesy lamps come on when any door is opened unless the dome lamp override is activated. To deactivate the dome lamp override, press j OFF and the indicator light on the button will turn off. The reading lamps, located on the front overhead console and the headliner above the rear seat passengers, can be controlled independently of the courtesy lamps. The brightness of the instrument cluster display, infotainment display and controls, steering wheel controls, and all other illuminated controls, as well as feature status indicators can be adjusted. The knob for this feature is on the instrument panel beside the steering column. Push the knob in all the way until it extends out and then turn the knob clockwise or counterclockwise to brighten or dim the lights. Dome Lamps 151 The dome lamp controls are in the overhead console. To operate, press the following buttons: j OFF : Press to turn off the dome lamps when a door is open. An indicator light on the button will turn on when the dome lamp override is activated. Press j OFF again to deactivate this feature and the indicator light will turn off. The dome lamps will come on when doors are opened. + ON/OFF : Press to turn the dome lamps on manually. Press again to turn the dome lamps off. Reading Lamps There are reading lamps on the overhead console and over the rear seats. These lamps come on when any door is opened. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 152 Lighting Lighting Features Entry Lighting Rear Reading Lamps The rear reading lamps are over the rear seats. Front Reading Lamps The front reading lamps are in the overhead console. Press the lamp lenses to turn the front reading lamps on or off. Press the lamp lens to turn the rear passenger reading lamps on or off. Some exterior lamps and most of the interior lights turn on briefly at night, or in areas of limited lighting when K is pressed on the Remote Keyless Entry (RKE) transmitter. See Remote Keyless Entry (RKE) System Operation 0 8. When the driver door is opened, all control lights, Driver Information Center (DIC) lights, and door pocket lights turn on. After about 30 seconds the exterior lamps turn off, then the remaining interior lights dim to off. Entry lighting can be disabled manually by turning the ignition on or to ACC/ACCESSORY, or by pressing Q on the RKE transmitter. This feature can be changed. See “Vehicle Locator Lights” under Vehicle Personalization 0 137. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Lighting Exit Lighting Some exterior lamps and interior lights come on at night, or in areas with limited lighting, when the driver door is opened after the ignition is turned off. The dome lamp comes on after the ignition is turned off. The exterior lamps and dome lamp remain on for a set amount of time, then automatically turn off. The exterior lamps turn off immediately by turning the exterior lamp control off. This feature can be changed. See Vehicle Personalization 0 137. Battery Load Management The vehicle has Electric Power Management (EPM) that estimates the battery's temperature and state of charge. It then adjusts the voltage for best performance and extended life of the battery. When the battery's state of charge is low, the voltage is raised slightly to quickly bring the charge back up. When the state of charge is high, the voltage is lowered slightly to prevent overcharging. If the vehicle has a voltmeter gauge or a voltage display on the Driver Information Center (DIC), you may see the voltage move up or down. This is normal. If there is a problem, an alert will be displayed. The battery can be discharged at idle if the electrical loads are very high. This is true for all vehicles. This is because the generator (alternator) may not be spinning fast enough at idle to produce all of the power needed for very high electrical loads. A high electrical load occurs when several of the following are on, such as: headlamps, high beams, rear window defogger, climate control fan at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets. EPM works to prevent excessive discharge of the battery. It does this by balancing the generator's output and the vehicle's electrical needs. 153 It can increase engine idle speed to generate more power whenever needed. It can temporarily reduce the power demands of some accessories. Normally, these actions occur in steps or levels, without being noticeable. In rare cases at the highest levels of corrective action, this action may be noticeable to the driver. If so, a DIC battery voltage and charging message displays. It is recommended that the driver reduce the electrical loads as much as possible. See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. Battery Power Protection This feature helps prevent the battery from being drained, if the interior courtesy lamps or reading lamps are accidentally left on. If any of these lamps are left on, they automatically turn off after 10 minutes, if the ignition is off. The lamps will not come back on again until one of the following occurs: Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 154 Lighting . The ignition is turned on. . The doors are closed and then re-opened. Exterior Lighting Battery Saver The exterior lamps turn off about 10 minutes after the ignition is turned off, if the parking lamps or headlamps have been manually left on. This protects against draining the battery. To restart the 10-minute timer, turn the exterior lamp control to the off position and then back to the parking lamp or headlamp position. To keep the lamps on for more than 10 minutes, the ignition must be on or in ACC/ACCESSORY. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Infotainment System Infotainment System Introduction Infotainment . . . . . . . . . . . . . . . . . . 155 Introduction Infotainment See the infotainment manual for information on the radio, audio players, phone, navigation system, and voice or speech recognition. It also includes information on settings. Active Noise Cancellation (ANC) If equipped, ANC reduces engine noise in the vehicle’s interior. ANC requires the factory-installed audio system, radio, speakers, amplifier (if equipped), induction system, and exhaust system to work properly. Deactivation is required by your dealer if related aftermarket equipment is installed. 155 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 156 Climate Controls Climate Controls Climate Control Systems Dual Automatic Climate Control System . . . . . . . . . . . . . 156 Rear Climate Control System . . . . . . . . . . . . . . . . . . . . . . 160 Climate Control Systems Dual Automatic Climate Control System The climate control buttons on the center stack and on the climate control display are used to adjust the heating, cooling, and ventilation. Air Vents Air Vents . . . . . . . . . . . . . . . . . . . . . 162 Maintenance Passenger Compartment Air Filter . . . . . . . . . . . . . . . . . . . . . . . . 163 Service . . . . . . . . . . . . . . . . . . . . . . . 163 Center Stack Climate Controls 1. Driver and Passenger Temperature Displays 2. Driver and Passenger Temperature Controls 3. Driver and Passenger Heated and Ventilated Seats (If Equipped) 4. Fan Controls 5. CLIMATE (Climate Control Display) 6. MAX Defrost 7. Recirculation Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Climate Controls 8. Rear Window Defogger and Heated Outside Mirrors (If Equipped) 9. ON/OFF (Power) 10. AUTO (Automatic Operation) Climate Control Display 1. Driver and Passenger Temperature Controls 2. Fan Control 3. Sync (Synchronized Temperature) 4. Outside Temperature Display 5. Recirculation 6. Air Delivery Mode Control 157 Climate Control Status Display 7. Auto (Automatic Operation) 8. A/C (Air Conditioning) 9. On/Off (Power) The fan, air delivery mode, air conditioning, driver and passenger temperatures, and Sync settings can be controlled by touching CLIMATE on the infotainment display Home Page or the climate button in the application tray display. A selection can then be made on the front climate control page displayed. See the infotainment manual. The climate control status display appears briefly when the climate controls on the center stack are adjusted. The air delivery mode can be adjusted on the climate control display. Automatic Operation The system automatically controls the fan speed, air delivery, air conditioning, and recirculation in order to heat or cool the vehicle to the desired temperature. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 158 Climate Controls When AUTO is lit, all four functions operate automatically. Each function can also be manually set and the selected setting is displayed. Functions not manually set will continue to be automatically controlled, even if the AUTO indicator is not lit. For automatic operation: 1. Press AUTO. 2. Set the temperature. Allow the system time to stabilize. Adjust the temperature as needed for best comfort. To improve fuel efficiency and to cool the vehicle faster with A/C on, recirculation may be automatically selected in warm weather. Press @ to select recirculation; press it again to select outside air. Driver and Passenger Temperature Controls : The temperature can be adjusted separately for the driver and the passenger. Turn the knob clockwise or counterclockwise to increase or decrease the driver or passenger temperature setting. The driver and passenger temperatures can also be adjusted by touching the controls on the climate control display. Pressing either button cancels automatic fan control and the fan is controlled manually. Press AUTO to return to automatic operation. Sync : Touch Sync on the display to link all passenger settings to the driver settings. Adjust the driver side temperature control to change the linked temperature. When the passenger settings are adjusted, the Sync button is displayed and the temperatures are unlinked. Air Delivery Mode Control : When the climate information is displayed, touch 6, Y, or X on the display to change the direction of airflow. Any combination of the three modes can be selected. The selected air delivery mode is lit. Pressing any mode control cancels automatic air delivery control and the direction of the airflow is controlled manually. Press AUTO to return to automatic operation. Manual Operation CLIMATE : Press CLIMATE to show the climate control display. ON/OFF : Press to turn the fan on or off. When off, no air will flow into the vehicle. Turning the fan on, pressing any other button, or turning a knob will turn the system back on using the current setting. To change the current mode, select one or more of the following: 6 : Air is directed to the floor hi : Press or touch the fan controls outlets, with some air to the windshield and side windows. on the center stack or the display to increase or decrease the fan speed. The fan speed setting displays. Y : Air is directed to the instrument panel outlets. X : Clears the windows of fog or moisture. Air is directed to the windshield. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Climate Controls 1 MAX : Air is directed to the windshield, the fan runs at a higher speed, and the temperature of the air is increased if not already at maximum. This mode overrides the previous mode selected and clears fog or frost from the windshield more quickly. When 1 MAX is pressed again, the system returns to the previous mode setting and fan speed. For best results, clear all snow and ice from the windshield before defrosting. A/C : Touch A/C on the display to turn the air conditioning on or off. If the fan is turned off, the air conditioner will not run and A/C OFF will show on the climate control display. Touch AUTO to return to automatic operation and the air conditioner runs automatically as needed. @ : Press to turn on recirculation. An indicator light comes on. Air is recirculated to quickly cool the inside of the vehicle or to reduce the entry of outside air and odors. If selected during cool or cold weather, the windshield and windows may fog. Turn off recirculation to help clear the windshield and windows. Auto Defog : The climate control system has a sensor to automatically detect high humidity inside the vehicle. When high humidity is detected, the climate control system may adjust to outside air supply and turn on the air conditioner. The fan speed may slightly increase to help prevent fogging. If the climate control system does not detect possible window fogging, it returns to normal operation. To turn Auto Defog off or on, see “Climate and Air Quality” under Vehicle Personalization 0 137. 159 Ionizer : If equipped with an ionizer, this feature helps to clean the air inside the vehicle and remove contaminants such as pollen, odors, and dust. If the climate control system is on and the ionizer is enabled, Ionizer On will be displayed. To turn the ionizer on or off, see “Climate and Air Quality” under Vehicle Personalization 0 137. Rear Window Defogger K : Press to turn the rear window defogger on or off. An indicator light on the button comes on to show that the rear window defogger is on. The rear window defogger only works when the engine is running. It turns off when the ignition is turned off or in ACC/ACCESSORY. The rear window defogger can be set to automatic operation. See “Climate and Air Quality” under Vehicle Personalization 0 137. When Auto Rear Defog is selected, the rear window defogger turns on automatically when the interior temperature is cold and the outside Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 160 Climate Controls temperature is about 4 °C (40 °F) and below. The auto rear defogger turns off automatically after about 10 minutes, or after five minutes if the outside temperature is not as cold. Heated and Ventilated Seats C or { : If equipped, press C or { to ventilate the driver or The upper gridlines on the rear window are antenna lines and are not intended to heat when the defogger is activated. Rear Climate Control System passenger seat. See Heated and Ventilated Front Seats 0 46. The rear climate control system is on the rear of the center console storage. The settings can be adjusted with the rear climate controls and the rear climate display. The heated outside mirrors turn on when the rear window defogger button is on and help to clear fog or frost from the surface of the mirror. See Heated Mirrors 0 31. Caution Do not try to clear frost or other material from the inside of the front windshield and rear window with a razor blade or anything else that is sharp. This may damage the rear window defogger grid and affect the radio's ability to pick up stations clearly. The repairs would not be covered by the vehicle warranty. M or L : If equipped, press M or L to heat the driver or passenger seat. Remote Start Climate Control Operation : The climate control system may run when the vehicle is started remotely. If the vehicle has heated or ventilated seats, they may come on during a remote start. See Remote Vehicle Start 0 15 and Heated and Ventilated Front Seats 0 46. Do not cover the sensor; otherwise the automatic climate control system may not work properly. Sensors The solar sensor, on top of the instrument panel near the windshield, monitors the solar heat. The climate control system uses the sensor information to adjust the temperature, fan speed, recirculation, and air delivery mode for best comfort. Rear Climate Controls 1. Fan Control 2. AUTO (Automatic Operation) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Climate Controls 3. MODE (Air Delivery Mode Control) 4. TEMP (Temperature Control) 5. Heated Rear Seats (If Equipped) Rear Climate Display 1. Rear Climate Temperature Control 2. Fan Control 3. Outside Temperature Display 4. Sync (Synchronized Temperatures) 5. Rear Control Lockout 6. Air Delivery Mode Control 7. Auto (Automatic Operation) 8. On/Off (Power) Sync : Touch Sync on the rear climate display to match the rear climate control temperature to the front climate control driver temperature. The Sync button will be lit. Adjust the rear climate control temperature to change the linked temperature. The Sync button turns off. Rear Control Lockout : Touch Q on the rear climate display to lock or unlock control of the rear climate control system from the front seat. When locked the rear climate control system cannot be adjusted from the second row seats. Automatic Operation AUTO : Touch AUTO on the rear climate display to automatically control air delivery and fan speed. A is indicated in the display on the rear of the center console storage when automatic operation is active. 161 If any of the climate control settings are manually adjusted, this cancels full automatic operation. The display on the rear of the center console storage only indicates climate control functions when the system is in rear independent mode. When Sync is active the display is not shown. Manual Operation 9 : Turn the knob clockwise or counterclockwise or press and hold S or T on the rear climate display to increase or decrease the fan speed. TEMP : Turn the knob clockwise or counterclockwise or press and hold the rear climate display temperature controls to adjust the rear passenger temperature. If Sync is lit, the rear climate temperature is linked to the driver temperature setting. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 162 Climate Controls Y/6 or MODE : Touch one or both modes on the rear climate display or press MODE on the rear climate controls to change the direction of the airflow in the rear seating area. Press MODE again to deselect. Active modes will be highlighted. M or L : If equipped, press M or L to heat the left or right outboard seat. See Heated Rear Seats 0 51. Air Vents Use the slider switch on the air outlets to change the direction of the airflow, or to open and close off the airflow. There are also outlets overhead in the rear passenger area; adjust as needed. Keep all outlets open whenever possible for best system performance. Operation Tips . Clear away any ice, snow, or leaves from the air inlets at the base of the windshield that can block the flow of air into the vehicle. . Clear snow off the hood to improve visibility and help decrease moisture drawn into the vehicle. . Use of non-GM approved hood deflectors can adversely affect the performance of the system. . Keep the path under all seats clear of objects to help circulate the air inside the vehicle more effectively. . If fogging reoccurs while in vent or bi-level modes with mild temperature throughout the vehicle, turn on the air conditioner to reduce windshield fogging. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Climate Controls Maintenance Passenger Compartment Air Filter The filter reduces dust, pollen, and other airborne irritants from outside air that is pulled into the vehicle. The filter should be replaced as part of routine scheduled maintenance. See Maintenance Schedule 0 328. See your dealer regarding replacement of the filter. Service All vehicles have a label underhood that identifies the refrigerant used in the vehicle. The refrigerant system should only be serviced by trained and certified technicians. The air conditioning evaporator should never be repaired or replaced by one from a salvage vehicle. It should only be replaced by a new evaporator to ensure proper and safe operation. During service, all refrigerants should be reclaimed with proper equipment. Venting refrigerants directly to the atmosphere is harmful to the environment and may also create unsafe conditions based on inhalation, combustion, frostbite, or other health-based concerns. The air conditioning system requires periodic maintenance. See Maintenance Schedule 0 328. 163 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 164 Driving and Operating Driving and Operating Retained Accessory Power (RAP) . . . . . . . . . . . . . . . . Shifting Into Park . . . . . . . . . . . . . Shifting out of Park . . . . . . . . . . . Parking over Things That Burn . . . . . . . . . . . . . . . . . . . Extended Parking . . . . . . . . . . . . Driving Information Driving for Better Fuel Economy . . . . . . . . . . . . . . . . . . . . Distracted Driving . . . . . . . . . . . . Defensive Driving . . . . . . . . . . . . . Drunk Driving . . . . . . . . . . . . . . . . . Control of a Vehicle . . . . . . . . . . . Braking . . . . . . . . . . . . . . . . . . . . . . . Steering . . . . . . . . . . . . . . . . . . . . . . Off-Road Recovery . . . . . . . . . . . Loss of Control . . . . . . . . . . . . . . . Off-Road Driving . . . . . . . . . . . . . Driving on Wet Roads . . . . . . . . Hill and Mountain Roads . . . . . Winter Driving . . . . . . . . . . . . . . . . If the Vehicle Is Stuck . . . . . . . . Vehicle Load Limits . . . . . . . . . . . 165 165 166 166 167 167 167 168 168 169 173 174 175 176 177 Starting and Operating New Vehicle Break-In . . . . . . . . . Ignition Positions . . . . . . . . . . . . . Starting the Engine . . . . . . . . . . . Stop/Start System . . . . . . . . . . . . Engine Heater . . . . . . . . . . . . . . . . 181 181 183 184 185 186 186 187 189 189 Engine Exhaust Engine Exhaust . . . . . . . . . . . . . . 190 Running the Vehicle While Parked . . . . . . . . . . . . . . . . . . . . . . 191 Automatic Transmission Automatic Transmission . . . . . . 191 Manual Mode . . . . . . . . . . . . . . . . . 196 Tow/Haul Mode . . . . . . . . . . . . . . . 196 Drive Systems All-Wheel Drive . . . . . . . . . . . . . . . 197 Brakes Antilock Brake System (ABS) . . . . . . . . . . . . . . . Electric Parking Brake . . . . . . . . Brake Assist . . . . . . . . . . . . . . . . . . Hill Start Assist (HSA) . . . . . . . . Cruise Control Cruise Control . . . . . . . . . . . . . . . . 203 Adaptive Cruise Control . . . . . . 206 Driver Assistance Systems Driver Assistance Systems . . . 214 Assistance Systems for Parking or Backing . . . . . . . . . . 216 Assistance Systems for Driving . . . . . . . . . . . . . . . . . . . . . . 220 Forward Collision Alert (FCA) System . . . . . . . . . . . . . . . . . . . . . . 221 Automatic Emergency Braking (AEB) . . . . . . . . . . . . . . . 223 Front Pedestrian Braking (FPB) System . . . . . . . . . . . . . . . 224 Side Blind Zone Alert (SBZA) . . . . . . . . . . . . . . . . 226 Lane Change Alert (LCA) . . . . . 227 Lane Keep Assist (LKA) . . . . . . 229 Fuel 197 198 199 200 Ride Control Systems Traction Control/Electronic Stability Control . . . . . . . . . . . . . 200 Driver Mode Control . . . . . . . . . . 202 Top Tier Fuel . . . . . . . . . . . . . . . . . Recommended Fuel . . . . . . . . . . Prohibited Fuels . . . . . . . . . . . . . . Fuels in Foreign Countries . . . Fuel Additives . . . . . . . . . . . . . . . . Filling the Tank . . . . . . . . . . . . . . . Filling a Portable Fuel Container . . . . . . . . . . . . . . . . . . . 231 231 231 232 232 232 234 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Trailer Towing General Towing Information . . . . . . . . . . . . . . . . . . Driving Characteristics and Towing Tips . . . . . . . . . . . . . . . . . Trailer Towing . . . . . . . . . . . . . . . . Towing Equipment . . . . . . . . . . . . Trailer Sway Control (TSC) . . . 234 234 238 241 244 Conversions and Add-Ons Add-On Electrical Equipment . . . . . . . . . . . . . . . . . . 246 165 Driving Information . Keep vehicle tires properly inflated. Driving for Better Fuel Economy . Combine several trips into a single trip. . Replace the vehicle's tires with the same TPC Spec number molded into the tire's sidewall near the size. . Follow recommended scheduled maintenance. Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible. . Set the climate controls to the desired temperature after the engine is started, or turn them off when not required. . On AWD vehicles, see Driver Mode Control 0 202. . Avoid fast starts and accelerate smoothly. . Brake gradually and avoid abrupt stops. . Avoid idling the engine for long periods of time. . When road and weather conditions are appropriate, use cruise control. . Always follow posted speed limits or drive more slowly when conditions require. Distracted Driving Distraction comes in many forms and can take your focus from the task of driving. Exercise good judgment and do not let other activities divert your attention away from the road. Many local governments have enacted laws regarding driver distraction. Become familiar with the local laws in your area. To avoid distracted driving, keep your eyes on the road, keep your hands on the steering wheel, and focus your attention on driving. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 166 . . . . Driving and Operating Do not use a phone in demanding driving situations. Use a hands-free method to place or receive necessary phone calls. Watch the road. Do not read, take notes, or look up information on phones or other electronic devices. Designate a front seat passenger to handle potential distractions. Become familiar with vehicle features before driving, such as programming favorite radio stations and adjusting climate control and seat settings. Program all trip information into any navigation device prior to driving. . Wait until the vehicle is parked to retrieve items that have fallen to the floor. . Stop or park the vehicle to tend to children. . Keep pets in an appropriate carrier or restraint. . Avoid stressful conversations while driving, whether with a passenger or on a cell phone. { Warning Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving. Refer to the infotainment manual for more information on using that system and the navigation system, if equipped, including pairing and using a cell phone. Defensive Driving Defensive driving means “always expect the unexpected.” The first step in driving defensively is to wear the seat belt. See Seat Belts 0 54. . Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what they might do and be ready. . Allow enough following distance between you and the driver in front of you. . Focus on the task of driving. Drunk Driving Death and injury associated with drinking and driving is a global tragedy. { Warning Drinking and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affected by even a small amount of alcohol. You can have a serious — or even fatal — collision if you drive after drinking. Do not drink and drive or ride with a driver who has been drinking. Ride home in a cab; or if you are with a group, designate a driver who will not drink. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Control of a Vehicle Braking, steering, and accelerating are important factors in helping to control a vehicle while driving. Braking Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average driver reaction time is about three-quarters of a second. In that time, a vehicle moving at 100 km/h (60 mph) travels 20 m (66 ft), which could be a lot of distance in an emergency. Helpful braking tips to keep in mind include: . Keep enough distance between you and the vehicle in front of you. . Avoid needless heavy braking. . Keep pace with traffic. 167 If the engine ever stops while the vehicle is being driven, brake normally but do not pump the brakes. Doing so could make the pedal harder to push down. If the engine stops, there will be some power brake assist but it will be used when the brake is applied. Once the power assist is used up, it can take longer to stop and the brake pedal will be harder to push. Steering Electric Power Steering Caution To avoid damage to the steering system, do not drive over curbs, parking barriers, or similar objects at speeds greater than 3 km/h (1 mph). Use care when driving over other objects such as lane dividers and speed bumps. Damage caused by misuse of the vehicle is not covered by the vehicle warranty. The vehicle has electric power steering. It does not have power steering fluid. Regular maintenance is not required. If power steering assist is lost due to a system malfunction, the vehicle can be steered, but may require increased effort. If the steering assist is used for an extended period of time while the vehicle is not moving, power assist may be reduced. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 168 Driving and Operating If the steering wheel is turned until it reaches the end of its travel and is held against that position for an extended period of time, power steering assist may be reduced. Normal use of the power steering assist should return when the system cools down. See your dealer if there is a problem. . Holding both sides of the steering wheel allows you to turn 180 degrees without removing a hand. . The Antilock Brake System (ABS) allows steering while braking. Off-Road Recovery Take curves at a reasonable speed. . Reduce speed before entering a curve. . Maintain a reasonable steady speed through the curve. . Wait until the vehicle is out of the curve before accelerating gently into the straightaway. Steering in Emergencies . There are some situations when steering around a problem may be more effective than braking. 2. Turn the steering wheel about one-eighth of a turn, until the right front tire contacts the pavement edge. 3. Turn the steering wheel to go straight down the roadway. Curve Tips . 1. Ease off the accelerator and then, if there is nothing in the way, steer the vehicle so that it straddles the edge of the pavement. Loss of Control Skidding The vehicle's right wheels can drop off the edge of a road onto the shoulder while driving. Follow these tips: There are three types of skids that correspond to the vehicle's three control systems: . Braking Skid — wheels are not rolling. . Steering or Cornering Skid — too much speed or steering in a curve causes tires to slip and lose cornering force. . Acceleration Skid — too much throttle causes the driving wheels to spin. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not overdriving those conditions. But skids are always possible. If the vehicle starts to slide, follow these suggestions: . Ease your foot off the accelerator pedal and steer the way you want the vehicle to go. The vehicle may straighten out. Be ready for a second skid if it occurs. . Slow down and adjust your driving according to weather conditions. Stopping distance can be longer and vehicle control can be affected when traction is reduced by water, snow, ice, gravel, or other material on the road. Learn to recognize warning clues — such as enough water, ice, or packed snow on the road to make a mirrored surface — and slow down when you have any doubt. . Try to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear. Any sudden changes could cause the tires to slide. { Warning When driving off-road, bouncing and quick changes in direction can easily throw you out of position. This could cause you to lose control and crash. You and your passengers should always wear seat belts. Remember: Antilock brakes help avoid only the braking skid. Off-Road Driving All-wheel-drive vehicles can be used for off-road driving. Vehicles without all-wheel drive and vehicles not equipped with All Terrain (AT) or On-Off Road (OOR) tires must not be driven off-road except on a level, solid surface. To contact the tire manufacturer for more information about the original equipment tires, see the warranty manual. Controlling the vehicle is the key to successful off-road driving. One of the best ways to control the vehicle is to control the speed. 169 Before Driving Off-Road . Have all necessary maintenance and service work completed. . Fuel the vehicle, fill fluid levels, and check inflation pressure in all tires, including the spare, if equipped. . Read all the information about all-wheel-drive vehicles in this manual. . Make sure all underbody shields, if equipped, are properly attached. . Know the local laws that apply to off-road driving. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 170 Driving and Operating To gain more ground clearance if needed, it may be necessary to remove the front fascia lower air dam. However, driving without the air dam reduces fuel economy. Warning (Continued) . Caution Operating the vehicle for extended periods without the front fascia lower air dam installed can cause improper airflow to the engine. Reattach the front fascia air dam after off-road driving. . Loading the Vehicle for Off-Road Driving { Warning . Unsecured cargo on the load floor can be tossed about when driving over rough terrain. You or your passengers can be struck by flying objects. Secure the cargo properly. (Continued) Keep cargo in the cargo area as far forward and as low as possible. The heaviest things should be on the floor, forward of the rear axle. Heavy loads on the roof raise the vehicle's center of gravity, making it more likely to roll over. You can be seriously or fatally injured if the vehicle rolls over. Put heavy loads inside the cargo area, not on the roof. For more information about loading the vehicle, see Vehicle Load Limits 0 177. Environmental Concerns . Always use established trails, roads, and areas that have been set aside for public off-road recreational driving and obey all posted regulations. . Do not damage shrubs, flowers, trees, or grasses or disturb wildlife. . Do not park over things that burn. See Parking over Things That Burn 0 189. Driving on Hills Driving safely on hills requires good judgment and an understanding of what the vehicle can and cannot do. { Warning Many hills are simply too steep for any vehicle. Driving up hills can cause the vehicle to stall. Driving down hills can cause loss of control. Driving across hills can cause a rollover. You could be injured or killed. Do not drive on steep hills. Before driving on a hill, assess the steepness, traction, and obstructions. If the terrain ahead cannot be seen, get out of the vehicle and walk the hill before driving further. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating When driving on hills: . Use a low gear and keep a firm grip on the steering wheel. . Maintain a slow speed. . When possible, drive straight up or down the hill. . Slow down when approaching the top of the hill. . Use headlamps even during the day to make the vehicle more visible. { Warning Driving to the top of a hill at high speed can cause a crash. There could be a drop-off, embankment, cliff, or even another vehicle. You could be seriously injured or killed. As you near the top of a hill, slow down and stay alert. . Never go downhill forward or backward with the transmission in N (Neutral). The brakes could overheat and you could lose control. . When driving down a hill, keep the vehicle headed straight down. Use a low gear because the engine will work with the brakes to slow the vehicle and help keep the vehicle under control. { Warning Heavy braking when going down a hill can cause your brakes to overheat and fade. This could cause loss of control and you or others could be injured or killed. Apply the brakes lightly when descending a hill and use a low gear to keep vehicle speed under control. If the vehicle stalls on a hill: 1. Apply the brakes to stop the vehicle, and then apply the parking brake. 171 2. Shift into P (Park) and then restart the engine. . If driving uphill when the vehicle stalls, shift to R (Reverse), release the parking brake, and back straight down. . Never try to turn the vehicle around. If the hill is steep enough to stall the vehicle, it is steep enough to cause it to roll over. . If you cannot make it up the hill, back straight down the hill. . Never back down a hill in N (Neutral) using only the brake. . The vehicle can roll backward quickly and you could lose control. . If driving downhill when the vehicle stalls, shift to a lower gear, release the parking brake, and drive straight down the hill. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 172 Driving and Operating 3. If the vehicle cannot be restarted after stalling, set the parking brake, shift the transmission into P (Park), and turn the vehicle off. . 3.1. Leave the vehicle and seek help. 3.2. Stay clear of the path the vehicle would take if it rolled downhill. . . Avoid turns that take the vehicle across the incline of the hill. A hill that can be driven straight up or down might be too steep to drive across. Driving across an incline puts more weight on the downhill wheels which could cause a downhill slide or a rollover. Surface conditions can be a problem. Loose gravel, muddy spots, or even wet grass can cause the tires to slip sideways, downhill. If the vehicle slips sideways, it can hit something that will trip it – a rock, a rut, etc. – and roll over. . Hidden obstacles can make the steepness of the incline more severe. If a rock is driven across with the uphill wheels, or if the downhill wheels drop into a rut or depression, the vehicle can tilt even more. Driving in Mud, Sand, Snow, or Ice If an incline must be driven across, and the vehicle starts to slide, turn downhill. This should help straighten out the vehicle and prevent the side slipping. Traction changes when driving on sand. On loose sand, such as on beaches or sand dunes, the tires tend to sink into the sand. This affects steering, accelerating, and braking. Drive at a reduced speed and avoid sharp turns or abrupt maneuvers. { Warning Getting out of the vehicle on the downhill side when stopped across an incline is dangerous. If the vehicle rolls over, you could be crushed or killed. Always get out on the uphill side of the vehicle and stay well clear of the rollover path. Use a low gear when driving in mud – the deeper the mud, the lower the gear. Keep the vehicle moving to avoid getting stuck. Traction is reduced on hard packed snow and ice and it is easy to lose control. Reduce vehicle speed when driving on hard packed snow and ice. { Warning Driving on frozen lakes, ponds, or rivers can be dangerous. Ice conditions vary greatly and the vehicle could fall through the ice; (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Warning (Continued) Caution you and your passengers could drown. Drive your vehicle on safe surfaces only. Do not drive through standing water if it is deep enough to cover the wheel hubs, axles, or exhaust pipe. Deep water can damage the axle and other vehicle parts. Driving in Water { Warning Driving through rushing water can be dangerous. Deep water can sweep your vehicle downstream and you and your passengers could drown. If it is only shallow water, it can still wash away the ground from under your tires. Traction could be lost, and the vehicle could roll over. Do not drive through rushing water. If the standing water is not too deep, drive through it slowly. At faster speeds, water can get into the engine and cause it to stall. Stalling can occur if the exhaust pipe is under water. Do not turn off the ignition when driving through water. If the exhaust pipe is under water, the engine will not start. When going through water, the brakes get wet and it may take longer to stop. See Driving on Wet Roads 0 173. After Off-Road Driving Remove any brush or debris that has collected on the underbody or chassis, or under the hood. These accumulations can be a fire hazard. 173 After operation in mud or sand, have the brake linings cleaned and checked. These substances can cause glazing and uneven braking. Check the body structure, steering, suspension, wheels, tires, and exhaust system for damage and check the fuel lines and cooling system for any leakage. More frequent maintenance service is required. See Maintenance Schedule 0 328. Driving on Wet Roads Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and deep-standing or flowing water. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 174 Driving and Operating { Warning Wet brakes can cause crashes. They might not work as well in a quick stop and could cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle of water or a car/vehicle wash, lightly apply the brake pedal until the brakes work normally. Flowing or rushing water creates strong forces. Driving through flowing water could cause the vehicle to be carried away. If this happens, you and other vehicle occupants could drown. Do not ignore police warnings and be very cautious about trying to drive through flowing water. Hydroplaning Hydroplaning is dangerous. Water can build up under the vehicle's tires so they actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When the vehicle is hydroplaning, it has little or no contact with the road. There is no hard and fast rule about hydroplaning. The best advice is to slow down when the road is wet. Other Rainy Weather Tips Besides slowing down, other wet weather driving tips include: . Allow extra following distance. . Pass with caution. . Keep windshield wiping equipment in good shape. . Keep the windshield washer fluid reservoir filled. . Have good tires with proper tread depth. See Tires 0 281. . Turn off cruise control. . Activate All-Wheel Drive (AWD) mode. See Driver Mode Control 0 202. Hill and Mountain Roads Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips include: . Keep the vehicle serviced and in good shape. . Check all fluid levels and brakes, tires, cooling system, and transmission. . Shift to a lower gear when going down steep or long hills. { Warning Using the brakes to slow the vehicle on a long downhill slope can cause brake overheating, can reduce brake performance, and could result in a loss of braking. Shift the transmission to a lower gear to let the engine assist the brakes on a steep downhill slope. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating { Warning Coasting downhill in N (Neutral) or with the ignition off is dangerous. This can cause overheating of the brakes and loss of steering assist. Always have the engine running and the vehicle in gear. . Drive at speeds that keep the vehicle in its own lane. Do not swing wide or cross the center line. . Be alert on top of hills; something could be in your lane (e.g., stalled car, crash). . Pay attention to special road signs (e.g., falling rocks area, winding roads, long grades, passing or no-passing zones) and take appropriate action. . Select All-Wheel Drive (AWD) Mode. See Driver Mode Control 0 202 and All-Wheel Drive 0 197. Winter Driving . Allow greater following distance and watch for slippery spots. Icy patches can occur on otherwise clear roads in shaded areas. The surface of a curve or an overpass can remain icy when the surrounding roads are clear. Avoid sudden steering maneuvers and braking while on ice. . Turn off cruise control. . Select All-Wheel Drive (AWD) Mode for vehicles equipped with AWD. Select Snow/Ice Mode for FWD only vehicles. See Driver Mode Control 0 202 and All-Wheel Drive 0 197. Driving on Snow or Ice Snow or ice between the tires and the road creates less traction or grip, so drive carefully. Wet ice can occur at about 0 °C (32 °F) when freezing rain begins to fall. Avoid driving on wet ice or in freezing rain until roads can be treated. For Slippery Road Driving: . Accelerate gently. Accelerating too quickly causes the wheels to spin and makes the surface under the tires slick. . Turn on Traction Control. See Traction Control/Electronic Stability Control 0 200. . The Antilock Brake System (ABS) improves vehicle stability during hard stops, but the brakes should be applied sooner than when on dry pavement. See Antilock Brake System (ABS) 0 197. 175 Blizzard Conditions Stop the vehicle in a safe place and signal for help. Stay with the vehicle unless there is help nearby. If possible, use Roadside Assistance. See Roadside Assistance Program 0 348. To get help and keep everyone in the vehicle safe: . Turn on the hazard warning flashers. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 176 . Driving and Operating Tie a red cloth to an outside mirror. { Warning Snow can trap engine exhaust under the vehicle. This may cause exhaust gases to get inside. Engine exhaust contains carbon monoxide (CO), which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle is stuck in snow: . Clear snow from the base of the vehicle, especially any blocking the exhaust pipe. . Open a window about 5 cm (2 in) on the vehicle side that is away from the wind, to bring in fresh air. . Fully open the air outlets on or under the instrument panel. (Continued) Warning (Continued) . Adjust the climate control system to circulate the air inside the vehicle and set the fan speed to the highest setting. See “Climate Control Systems.” For more information about CO, see Engine Exhaust 0 190. To save fuel, run the engine for short periods to warm the vehicle and then shut the engine off and partially close the window. Moving about to keep warm also helps. If it takes time for help to arrive, when running the engine, push the accelerator pedal slightly so the engine runs faster than the idle speed. This keeps the battery charged to restart the vehicle and to signal for help with the headlamps. Do this as little as possible, to save fuel. If the Vehicle Is Stuck Slowly and cautiously spin the wheels to free the vehicle when stuck in sand, mud, ice, or snow. If stuck too severely for the traction system to free the vehicle, turn the traction system off and use the rocking method. See Traction Control/Electronic Stability Control 0 200. { Warning If the vehicle's tires spin at high speed, they can explode, and you or others could be injured. The vehicle can overheat, causing an engine compartment fire or other damage. Spin the wheels as little as possible and avoid going above 56 km/h (35 mph). Select All-Wheel Drive (AWD) Mode. See Driver Mode Control 0 202 and All-Wheel Drive 0 197. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Rocking the Vehicle to Get it Out Turn the steering wheel left and right to clear the area around the front wheels. Turn off any traction system. Shift back and forth between R (Reverse) and a low forward gear, spinning the wheels as little as possible. To prevent transmission wear, wait until the wheels stop spinning before shifting gears. Release the accelerator pedal while shifting, and press lightly on the accelerator pedal when the transmission is in gear. Slowly spinning the wheels in the forward and reverse directions causes a rocking motion that could free the vehicle. If that does not get the vehicle out after a few tries, it might need to be towed out. If the vehicle does need to be towed out, see Towing the Vehicle 0 313. Vehicle Load Limits It is very important to know how much weight the vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. Two labels on the vehicle may show how much weight it may properly carry, the Tire and Loading Information label and the Certification/Tire label. 177 Tire and Loading Information Label { Warning Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). This can cause systems to break and change the way the vehicle handles. This could cause loss of control and a crash. Overloading can also reduce stopping distance, damage the tires, and shorten the life of the vehicle. Example Label A vehicle-specific Tire and Loading Information label is attached to the center pillar (B-pillar). The tire and loading information label shows the number of occupant seating positions (1), and the maximum vehicle capacity weight (2) in kilograms and pounds. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 178 Driving and Operating The Tire and Loading Information label also shows the size of the original equipment tires (3) and the recommended cold tire inflation pressures (4). For more information on tires and inflation see Tires 0 281 and Tire Pressure 0 288. There is also important loading information on the vehicle Certification/Tire label. It may show the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axle. See “Certification/Tire Label” later in this section. “Steps for Determining Correct Load Limit– 1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs. and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400-750 (5 x 150) = 650 lbs.) 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.” See Trailer Towing 0 238 for important information on towing a trailer, towing safety rules and trailering tips. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Example 1 Example 2 179 Example 3 1. Vehicle Capacity Weight 1. Vehicle Capacity Weight 1. Vehicle Capacity Weight for Example 1 = 453 kg (1,000 lbs). 2. Subtract Occupant Weight @ 68 kg (150 lbs) × 2 = 136 kg (300 lbs). 3. Available Occupant and Cargo Weight = 317 kg (700 lbs). for Example 2 = 453 kg (1,000 lbs). 2. Subtract Occupant Weight @ 68 kg (150 lbs) × 5 = 340 kg (750 lbs). 3. Available Cargo Weight = 113 kg (250 lbs). for Example 3 = 453 kg (1,000 lbs). 2. Subtract Occupant Weight @ 91 kg (200 lbs) × 5 = 453 kg (1,000 lbs). 3. Available Cargo Weight = 0 kg (0 lbs). Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 180 Driving and Operating Refer to the vehicle's tire and loading information label for specific information about the vehicle's capacity weight and seating positions. The combined weight of the driver, passengers, and cargo should never exceed the vehicle's capacity weight. Certification/Tire Label Label Example A vehicle-specific Certification/ Tire label is attached to the center pillar (B-pillar). The label may show the size of the vehicle's original tires and the inflation pressures needed to obtain the gross weight capacity of the vehicle. The label shows the gross weight capacity of the vehicle. This is called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, and cargo. The Certification/Tire label may also show the maximum weights for the front and rear axles, called the Gross Axle Weight Rating (GAWR). To find out the actual loads on the front and rear axles, weigh the vehicle at a weigh station. Your dealer can help with this. Be sure to spread the load equally on both sides of the centerline. Caution Overloading the vehicle may cause damage. Repairs would not be covered by the vehicle warranty. Do not overload the vehicle. { Warning Things inside the vehicle can strike and injure people in a sudden stop or turn, or in a crash. . Put things in the cargo area of the vehicle. In the cargo area, put them as far forward as possible. Try to spread the weight evenly. (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Warning (Continued) . . Never stack heavier things, like suitcases, inside the vehicle so that some of them are above the tops of the seats. Do not leave an unsecured child restraint in the vehicle. . Secure loose items in the vehicle. . Do not leave a seat folded down unless needed. Starting and Operating New Vehicle Break-In Caution The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: . Do not drive at any one constant speed, fast or slow, for the first 800 km (500 mi). Do not make full-throttle starts. Avoid downshifting to brake or slow the vehicle. . Avoid making hard stops for the first 300 km (200 mi) or so. During this time the new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier replacement. Follow this (Continued) 181 Caution (Continued) breaking-in guideline every time you get new brake linings. Following break-in, engine speed and load can be gradually increased. Ignition Positions Vehicles with Keyless Access have pushbutton starting. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 182 Driving and Operating The Remote Keyless Entry (RKE) transmitter must be in the vehicle for the system to operate. If the pushbutton start is not working, the vehicle may be near a strong radio antenna signal causing interference to the Keyless Access system. See Remote Keyless Entry (RKE) System Operation 0 8. To shift out of P (Park), the engine must be running, and the brake pedal must be applied. Stopping the Engine/OFF (No Indicator Lights) : When the vehicle is stopped, press ENGINE START/STOP once to turn the engine off. If the vehicle is in P (Park), the ignition will turn off, and Retained Accessory Power (RAP) will remain active. See Retained Accessory Power (RAP) 0 186. If the vehicle is in R (Reverse), D (Drive) or L (Low), the vehicle will shift to P (Park), the ignition will turn off, and Retained Accessory Power (RAP) will remain active. If the vehicle is in N (Neutral), the ignition will return to ACC/ ACCESSORY and display the message SHIFT TO PARK in the Driver Information Center (DIC). When the vehicle is shifted into P (Park), the ignition will turn off. Do not turn the engine off when the vehicle is moving. This will cause a loss of power assist in the brake and steering systems and disable the airbags. If the vehicle must be shut off in an emergency: 4. Set the parking brake. See Electric Parking Brake 0 198. 5. Press ENGINE START/STOP to turn the vehicle off. { Warning Turning off the vehicle while moving may cause loss of power assist in the brake and steering systems and disable the airbags. While driving, only shut the vehicle off in an emergency. 1. Brake using a firm and steady pressure. Do not pump the brakes repeatedly. This may deplete power assist, requiring increased brake pedal force. If the vehicle cannot be pulled over, and must be shut off while driving, press and hold ENGINE START/ STOP for longer than two seconds, or press twice in five seconds. 2. Shift the vehicle to N (Neutral). This can be done while the vehicle is moving. After shifting to N (Neutral), firmly apply the brakes and steer the vehicle to a safe location. ACC/ACCESSORY (Amber Indicator Light) : This mode allows some electrical accessories to be used when the engine is off. 3. Come to a complete stop and shift to P (Park). With the ignition off, pressing the button one time without the brake pedal applied will place the ignition system in ACC/ACCESSORY. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating The ignition will switch from ACC/ ACCESSORY to OFF after five minutes to prevent battery rundown. ON/RUN/START (Green Indicator Light) : This mode is for driving and starting. With the ignition off, and the brake pedal applied, pressing the button once will place the ignition system in ON/RUN/START. Once engine cranking begins, release the button. Engine cranking will continue until the engine starts. See Starting the Engine 0 183. The ignition will then remain on. Service Mode This power mode is available for service and diagnostics, and to verify the proper operation of the malfunction indicator lamp as may be required for emission inspection purposes. With the vehicle off, and the brake pedal not applied, pressing and holding the button for more than five seconds will place the vehicle in Service Mode. The instruments and audio systems will operate as they do in ON/RUN, but the vehicle will not be able to be driven. The engine will not start in Service Mode. Press the button again to turn the vehicle off. Starting the Engine Press the P (Park) button on the shift lever or shift the vehicle to N (Neutral). The engine will not start in any other position. To restart the engine when the vehicle is already moving, use N (Neutral) only. Caution Do not try to shift to P (Park) if the vehicle is moving. If you do, you could damage the transmission. Shift to P (Park) only when the vehicle is stopped. Caution If you add electrical parts or accessories, you could change the way the engine operates. Any resulting damage would not be (Continued) 183 Caution (Continued) covered by the vehicle warranty. See Add-On Electrical Equipment 0 246. Starting Procedure 1. With the Keyless Access system, the RKE transmitter must be in the vehicle. Press ENGINE START/STOP with the brake pedal applied. When the engine begins cranking, let go of the button. The idle speed will go down as the engine gets warm. Do not race the engine immediately after starting it. If the RKE transmitter is not in the vehicle, if there is interference, or if the RKE battery is low, the Driver Information Center (DIC) will display a message. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 184 Driving and Operating Caution Cranking the engine for long periods of time, by returning the ignition to the START position immediately after cranking has ended, can overheat and damage the cranking motor, and drain the battery. Wait at least 15 seconds between each try, to let the cranking motor cool down. 2. If the engine does not start after five to 10 seconds, especially in very cold weather (below −18 °C or 0 °F), it could be flooded with too much gasoline. Try pushing the accelerator pedal all the way to the floor and holding it there as you press ENGINE START/ STOP, for up to a maximum of 15 seconds. Wait at least 15 seconds between each try, to allow the cranking motor to cool down. When the engine starts, let go of the button and the accelerator. If the vehicle starts briefly but then stops again, do the same thing. This clears the extra gasoline from the engine. Do not race the engine immediately after starting it. Operate the engine and transmission gently until the oil warms up and lubricates all moving parts. Stop/Start System This vehicle has a Stop/Start system to shut off the engine to help conserve fuel. It has components designed for the increased number of starts. { Warning The automatic engine Stop/Start feature causes the engine to shut off while the vehicle is still on. Do not exit the vehicle before shifting to P (Park). The vehicle may restart and move unexpectedly. Always shift to P (Park), and then turn the ignition off before exiting the vehicle. Auto Engine Stop/Start When the brakes are applied and the vehicle is at a complete stop, the engine may turn off. When stopped, the tachometer displays AUTO STOP. See Tachometer 0 116. When the brake pedal is released or the accelerator pedal is pressed, the engine will restart. To maintain vehicle performance, other conditions may cause the engine to automatically restart before the brake pedal is released. Auto Stops may not occur and/or auto restarts may occur because: . The climate control settings require the engine to be running to cool or heat the vehicle interior. . The vehicle battery charge is low. . The vehicle battery has recently been disconnected. . Minimum vehicle speed has not been reached since the last Auto Stop. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating . The accelerator pedal is pressed. . The engine or transmission is not at the required operating temperature. . The outside temperature is not in the required operating range. . The vehicle transmission is shifted out of D (Drive) to any gear other than P (Park). . Tow/Haul Mode or other driver modes have been selected. . The vehicle is on a steep hill or grade. . The driver door has been opened or driver seat belt has been unbuckled. . The hood has been opened. . The Auto Stop has reached the maximum allowed time. Engine Heater The engine heater can provide easier starting and better fuel economy during engine warm-up in cold weather conditions at or below 0 °F (−18 °C). Vehicles with an engine heater should be plugged in at least four hours before starting. Some models may have an internal thermostat in the cord which will prevent engine heater operation at temperatures above 0 °F (−18 °C). To Use the Engine Heater 1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. The bundled cord is on the driver side of the engine compartment, in front of the battery. See Engine Compartment Overview 0 252. 185 Check the heater cord for damage. If it is damaged, do not use it. See your dealer for a replacement. Inspect the cord for damage yearly. 3. Plug the cord into a normal, grounded 110-volt AC outlet. { Warning Improper use of the heater cord or an extension cord can damage the cord and may result in overheating and fire. . Plug the cord into a three-prong electrical utility receptacle that is protected by a ground fault detection function. An ungrounded outlet could cause an electric shock. . Use a weatherproof, heavy-duty, 15 amp-rated extension cord if needed. Failure to use the recommended extension cord in good operating (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 186 Driving and Operating Warning (Continued) condition, or using a damaged heater or extension cord, could make it overheat and cause a fire, property damage, electric shock, and injury. . . . Do not operate the vehicle with the heater cord permanently attached to the vehicle. Possible heater cord and thermostat damage could occur. While in use, do not let the heater cord touch vehicle parts or sharp edges. Never close the hood on the heater cord. Before starting the vehicle, unplug the cord, reattach the cover to the plug, and securely fasten the cord. Keep the cord away from any moving parts. 4. Before starting the engine, be sure to unplug and store the cord as it was before to keep it away from moving engine parts. If you do not, it could be damaged. . Sunroof (during RAP this functionality will be lost when any door is opened) . Auxiliary Power Outlet . Audio System The length of time the heater should remain plugged in depends on several factors. Ask a dealer in the area where you will be parking the vehicle for the best advice on this. . OnStar System Retained Accessory Power (RAP) When the ignition is turned from on to off, the following features (if equipped) will continue to function for up to 10 minutes, or until the driver door is opened. These features will also work when the ignition is in RUN or ACC/ ACCESSORY: . Infotainment System . Power Windows (during RAP this functionality will be lost when any door is opened) Shifting Into Park To shift into P (Park): 1. Press the brake pedal and come to complete stop. 2. Press the button on top of the shift lever to shift into P (Park). See Automatic Transmission 0 191. 3. The P indicator on the shift lever will turn red when the vehicle is in P (Park). Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Leaving the Vehicle with the Engine Running { Warning It can be dangerous to leave the vehicle with the engine running. It could overheat and catch fire. It is dangerous to get out of the vehicle if the vehicle is not in P (Park) with the parking brake set. The vehicle can roll. Do not leave the vehicle when the engine is running. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure the vehicle will not move, even when you are on fairly level ground, always set the parking brake and shift to P (Park). See Shifting Into Park 0 186. If you are towing a trailer, see Driving Characteristics and Towing Tips 0 234. If you have to leave the vehicle with the engine running, be sure the vehicle is in P (Park) and the parking brake is set before you leave it. After you have pressed the P (Park) button, hold down the brake pedal. If you cannot see the P (Park) indicator in the instrument cluster, it means that the vehicle is not in P (Park). 187 If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting - North America 0 311. If you are towing a trailer and parking on a hill, see Driving Characteristics and Towing Tips 0 234. Shifting out of Park This vehicle is equipped with an electronic transmission. The shift lock release button is designed to prevent inadvertent shifting out of P (Park) unless the ignition is in on, the brake pedal is applied, and the shift lock release button is pressed. The shift lock control is always functional except in the case of an uncharged or low voltage (less than 9-volt) battery. To shift out of P (Park): 1. Ensure the engine is running. 2. Apply the brake pedal. 3. Press and hold the shift lock release button. 4. Move the shift lever to the desired position. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 188 Driving and Operating 5. The P indicator will turn white and the gear indicator on the shift lever will turn red when the vehicle is no longer in P (Park). 6. After releasing the shift lever, it will return to the center position. If the vehicle cannot shift from P (Park), a Driver Information Center (DIC) message will be displayed. See your dealer for service. Manual Park Release { Warning The transmission will be placed in N (Neutral) when the manual park release is pulled. The vehicle can roll and you or others could be injured. Ensure the vehicle is on level ground. Caution The manual park release is not intended to be used for towing. Damage may result from using the manual park release in this way. The repairs would not be covered by the vehicle warranty. 1. Ensure the vehicle is on level ground and set the parking brake. Release the brake pedal. 2. Turn the vehicle off. This vehicle includes a manual park release that can be accessed (if equipped with an access panel, otherwise see your dealer) and used to shift the vehicle into N (Neutral) when the engine is not running. Pulling the manual park release while the vehicle is on or turning the ignition on while the manual park release is pulled, will result in a Service Transmission message being displayed. To place the vehicle in N (Neutral) using the manual park release: 3. Use a flat-bladed tool to remove the fastener located in the lower front corner of the interior trim panel on the center console to the right of the accelerator pedal. 4. Use a flat-bladed tool to pry off the panel. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating 5. Ensure more than one minute has elapsed since Step 2. Apply the brake pedal. To return the vehicle to P (Park) using the manual park release: 1. Bring the vehicle to a complete stop. 189 Parking over Things That Burn { Warning Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. Extended Parking 6. Pull the manual park release lever 90° to its latching position. 7. With the brake pedal released, place the ignition in ACC/ ACCESSORY. Then apply the brake pedal and release the parking brake. 8. Ensure there are no loose objects in the area that could bump the manual park release lever. 2. Rotate the manual park release 90° back to its original position. 3. Apply the parking brake. 4. Confirm that the vehicle is in P (Park) by turning the ignition on or placing the vehicle in ACC/ACCESSORY, then ensure that the indicator displays P. 5. Reinstall the access panel and fastener. It is best not to park with the vehicle running. If the vehicle is left running, be sure it will not move and there is adequate ventilation. See Shifting Into Park 0 186 and Engine Exhaust 0 190. If the vehicle is left parked and running with the RKE transmitter outside the vehicle, it will continue to run for up to half an hour. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 190 Driving and Operating If the vehicle is left parked and running with the RKE transmitter inside the vehicle, it will continue to run for up to an hour. The vehicle could turn off sooner if it is parked on a hill, due to lack of available fuel. The timer will reset if the vehicle is taken out of P (Park) while it is running. Engine Exhaust { Warning Engine exhaust contains carbon monoxide (CO), which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: . The vehicle idles in areas with poor ventilation (parking garages, tunnels, deep snow that may block underbody airflow or tail pipes). . The exhaust smells or sounds strange or different. . The exhaust system leaks due to corrosion or damage. . The vehicle exhaust system has been modified, damaged, or improperly repaired. (Continued) Warning (Continued) . There are holes or openings in the vehicle body from damage or aftermarket modifications that are not completely sealed. If unusual fumes are detected or if it is suspected that exhaust is coming into the vehicle: . Drive it only with the windows completely down. . Have the vehicle repaired immediately. Never park the vehicle with the engine running in an enclosed area such as a garage or a building that has no fresh air ventilation. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Running the Vehicle While Parked Automatic Transmission It is better not to park with the engine running. 191 The shift lever always starts from a center position, represented by an amber dot on the shift pattern. After releasing the shift lever, it will return to the center position. If the vehicle is left with the engine running, follow the proper steps to be sure the vehicle will not move. See Shifting Into Park 0 186 and Engine Exhaust 0 190. The transmission does not operate when the vehicle is off. If parking on a hill and pulling a trailer, see Driving Characteristics and Towing Tips 0 234. If the ignition is turned off while at a relatively high vehicle speed, the transmission will automatically shift to N (Neutral). Once the vehicle is stopped, P (Park) can be selected. If the vehicle is in ACC/ ACCESSORY, the transmission can be shifted into P (Park). The shift pattern is displayed in the top of the shift lever. The selected gear position will illuminate red on the shift lever, while all others will be displayed in white. If the shift is not immediate, as in very cold conditions, the indicator on the shift lever may flash until it is fully engaged. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 192 Driving and Operating To shift in and out of P (Park), see Shifting Into Park 0 186 and Shifting out of Park 0 187. P : This position locks the drive wheels. Use P (Park) when starting the engine because the vehicle cannot move easily. SERVICE SHIFTER SEE OWNER’S MANUAL Message { Warning It is dangerous to get out of the vehicle if the transmission is not in P (Park) with the parking brake set. The vehicle can roll. Do not leave the vehicle when the engine is running. If the engine has been left running, the vehicle can move suddenly. You or others could be injured. To be sure the vehicle will not move, even when on fairly level ground, always set the parking brake and place the transmission into P (Park). See Shifting Into Park 0 186 and Driving Characteristics and Towing Tips 0 234. This vehicle is equipped with an electronic transmission. The shift lock release button is designed to prevent inadvertent shifting out of P (Park) unless the ignition is on, the brake pedal is applied, and the shift lock release button is pressed. When the vehicle is stopped, press ENGINE START/STOP to turn off the vehicle. The transmission will shift to P (Park) automatically unless the vehicle is in N (Neutral). See “Car Wash Mode” later in this section. The vehicle will not shift into P (Park) if it is moving too fast. Stop the vehicle and shift into P (Park). When this message displays in the Driver Information Center (DIC), the shift lever needs service. Have the vehicle serviced as soon as possible. If the vehicle is automatically shifting into P (Park), check to see if the P (Park) button on top of the shift lever is stuck. To operate the vehicle, hold the shift lever in the desired gear, R (Reverse) or D (Drive), until vehicle speed exceeds 15 km/h (10 mph), then release the shift lever. R : Use this gear to back up. If the vehicle is shifted from D (Drive) to R (Reverse) while the speed is too high, the vehicle will shift to N (Neutral). Reduce the vehicle speed and try the shift again. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Shifting into R (Reverse) requires the shift lock release button to be pressed and held. ice, or sand without damaging the transmission. See If the Vehicle Is Stuck 0 176. To shift into R (Reverse): N : In this position, the engine does not connect with the wheels. To restart the engine when the vehicle is already moving, use N (Neutral) only. 1. Bring the vehicle to a complete stop. 2. Press and hold the shift lock release button on the side of the shift lever. 3. From the center position, move the shift lever forward, and then to the left. R will illuminate in red. 4. After releasing the shift lever, it will return to the center position. To shift out of R (Reverse): 1. Bring the vehicle to a complete stop. { Warning Shifting into a drive gear while the engine is running at high speed is dangerous. Unless your foot is firmly on the brake pedal, the vehicle could move very rapidly. You could lose control and hit people or objects. Do not shift into a drive gear while the engine is running at high speed. 2. Shift to the desired gear. 3. After releasing the shift lever, it will return to the center position. At low vehicle speeds, R (Reverse) can be used to rock the vehicle back and forth to get out of snow, Caution Shifting out of P (Park) or N (Neutral) with the engine running at high speed may (Continued) 193 Caution (Continued) damage the transmission. The repairs would not be covered by the vehicle warranty. Be sure the engine is not running at high speed when shifting the vehicle. The vehicle is not designed to stay in N (Neutral) for extended periods of time. It will automatically shift into P (Park). To shift into N (Neutral): 1. From the center position, move the shift lever forward. . If the vehicle is in P (Park), apply the brake pedal and press the shift lock release button while moving the shift lever forward. . N will illuminate in red. 2. After releasing the shift lever, it will return to the center position. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 194 Driving and Operating To shift out of N (Neutral): 1. Bring the vehicle to a complete stop. 2. Shift to the desired gear. If selecting R (Reverse), press and hold the shift lock release button. 3. After releasing the shift lever, it will return to the center position. Car Wash Mode (Engine Off – Driver in Vehicle) 3. Open the door. To place the vehicle in N (Neutral) with the engine off and the vehicle occupied: 5. Turn off the engine and release the brake pedal. 1. Drive to the entrance of the car wash. 2. Apply the brake pedal. 3. Shift to N (Neutral). Car Wash Mode 4. Turn off the engine and release the brake pedal. This vehicle includes a Car Wash Mode that allows the vehicle to remain in N (Neutral) for use in automatic car washes. 5. The indicator should continue to show N. If it does not, start the engine and repeat Steps 2–4. The vehicle is not designed to stay in N (Neutral) for more than five minutes. It may automatically shift into P (Park). N (Neutral) is not intended for towing. If the vehicle needs to be towed, see Towing the Vehicle 0 313. 6. The vehicle is now ready for the car wash. Car Wash Mode (Engine Off – Driver out of Vehicle) To place the vehicle in N (Neutral) with the engine off and the vehicle unoccupied: 1. Drive to the entrance of the car wash. 2. Apply the brake pedal. 4. Shift to N (Neutral). 6. The indicator should continue to show N. If it does not, start the engine and repeat Steps 2–5. 7. Exit the vehicle and close the door. The vehicle is now ready for the car wash. 8. The vehicle may automatically shift to P (Park) upon re-entry. Car Wash Mode (Engine On – Driver in Vehicle) To place the vehicle in N (Neutral) with the engine on and the vehicle occupied: 1. Drive to the entrance of the car wash. 2. Apply the brake pedal. 3. Shift to N (Neutral). 4. Release the brake pedal. The vehicle is now ready for the car wash. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Car Wash Mode (Engine On – Driver out of Vehicle) To place the vehicle in N (Neutral) with the engine on and the vehicle unoccupied: 1. Drive to the entrance of the car wash. 2. Apply the brake pedal. 3. Open the door. 4. Shift to N (Neutral), then release the brake pedal. 5. The indicator should continue to show N. If it does not, repeat Steps 2–4. 6. Exit the vehicle and close the door. The vehicle is now ready for the car wash. 7. The vehicle may automatically shift to P (Park) upon re-entry. D : This position is for normal driving. If more power is needed for passing, press the accelerator pedal down. To shift into D (Drive): 1. Bring the vehicle to a complete stop. 2. From the center position, move the shift lever back. If the vehicle is in P (Park) press and hold the shift lock release button, continue holding it, and move the shift lever back. D will illuminate in red. 3. After releasing the shift lever, it will return to the center position. To shift out of D (Drive): 1. Bring the vehicle to a complete stop. 2. Shift to the desired gear. 3. After releasing the shift lever, it will return to the center position. Downshifting the transmission in slippery road conditions could result in skidding. See “Skidding” under Loss of Control 0 168. 195 Caution A transmission hot message may display if the automatic transmission fluid is too hot. Driving under this condition can damage the vehicle. Stop and idle the engine to cool the automatic transmission fluid. This message clears when the transmission fluid has cooled sufficiently. Caution Spinning the tires or holding the vehicle in one place on a hill using only the accelerator pedal may damage the transmission. The repair will not be covered by the vehicle warranty. If the vehicle is stuck, do not spin the tires. When stopping on a hill, use the brakes to hold the vehicle in place. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 196 Driving and Operating Manual Mode Electronic Range Select (ERS) Caution Driving with the engine at a high rpm without upshifting while using Manual Mode, could damage the vehicle. Always upshift when necessary while using Manual Mode. positions. Use this mode when driving downhill or towing a trailer to limit the top gear and vehicle speed. The shift position indicator within the Driver Information Center (DIC) will display a number next to the L indicating the highest available gear. To enter Electronic Range Select or Manual Mode: 1. With the vehicle in D (Drive), pull back on the shift lever to activate L (Low). The L in the shift pattern will illuminate in red, and the D will switch to white. 2. Tap the left steering wheel control to reduce the highest gear available, or the right control to increase the highest gear available. 3. To exit, pull back on the shift lever a second time. The D in the shift pattern will illuminate in red, and the L will switch to white. Electronic Range Select (ERS), or Manual Mode, allows for the selection of the range of gear When shifting to L (Low), the transmission will shift to a preset lower gear range. For this preset range, the highest gear available will be displayed next to the L in the DIC. All gears below that number are available to use. For example, when 4 (Fourth) is shown next to the L, 1 (First) through 4 (Fourth) gears are shifted automatically. To shift to 5 (Fifth) gear, tap the right steering wheel control or shift into D (Drive). L (Low) will prevent shifting to a lower gear range if the engine speed is too high. If the vehicle speed is not reduced within the time allowed, the lower gear range shift will not be completed. Slow the vehicle, then tap the left steering wheel control to the desired lower gear range. Cruise control can be used while in ERS. Tow/Haul Mode This feature can assist when towing or hauling a heavy load. To activate Tow/Haul Mode, see Driver Mode Control 0 202. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Drive Systems All-Wheel Drive Vehicles with this feature can operate in AWD Mode. The AWD Mode will stay selected until the mode is changed. See Driver Mode Control 0 202. When operated in FWD, the vehicle will deliver power to the front wheels only and may provide better fuel economy. When using a compact spare tire on an AWD vehicle, the system automatically detects the compact spare and reduces AWD performance to protect the system. To restore full AWD operation and prevent excessive wear on the system, replace the compact spare with a full-size tire as soon as possible. See Compact Spare Tire 0 309. 197 Brakes Antilock Brake System (ABS) The Antilock Brake System (ABS) helps prevent a braking skid and maintain steering while braking hard. ABS performs a system check when the vehicle is first driven. A momentary motor or clicking noise may be heard while this test is going on, and the brake pedal may move slightly. This is normal. Press the button to select All-Wheel Drive (AWD). If there is a problem with ABS, this warning light stays on. See Antilock Brake System (ABS) Warning Light 0 125. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 198 Driving and Operating ABS does not change the time needed to get a foot on the brake pedal and does not always decrease stopping distance. If you get too close to the vehicle ahead, there will not be enough time to apply the brakes if that vehicle suddenly slows or stops. Always leave enough room ahead to stop, even with ABS. Electric Parking Brake EPB Apply To apply the EPB: 1. Be sure the vehicle is at a complete stop. 2. Press the EPB switch momentarily. Using ABS Do not pump the brakes. Just hold the brake pedal down firmly. Hearing or feeling ABS operate is normal. Braking in Emergencies ABS allows steering and braking at the same time. In many emergencies, steering can help even more than braking. Before leaving the vehicle, check for the Y or PARK light to ensure that the parking brake is applied. The vehicle has an Electric Parking Brake (EPB). The EPB can always be activated, even if the ignition is off. To prevent draining the battery, avoid repeated cycles of the EPB system when the engine is not running. The system has a Y or PARK Electric Parking Brake light, and a 8 Service Parking Brake light. See Electric Parking Brake Light 0 124 and Service Electric Parking Brake Light 0 125. The Y or PARK light will flash and then stay on once the EPB is fully applied. If the Y or PARK light flashes continuously, then the EPB is only partially applied or there is a problem with the EPB. A DIC message will display. Release the EPB and try to apply it again. If the light does not come on, or keeps flashing, have the vehicle serviced. Do not drive the vehicle if the Y or PARK light is flashing. See your dealer. See Electric Parking Brake Light 0 124. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating If the 8 light is on, press the EPB switch and hold it. Continue to hold the switch until the Y or PARK light remains on. If the 8 light remains on, see your dealer. If the EPB is applied while the vehicle is moving, the vehicle will decelerate as long as the switch is pressed. If the switch is pressed until the vehicle comes to a stop, the EPB will remain applied. The vehicle may automatically apply the EPB in some situations when the vehicle is not moving. This is normal, and is done to periodically check the correct operation of the EPB system. If the EPB fails to apply, block the rear wheels to prevent vehicle movement. EPB Release To release the EPB: 1. Turn the ignition on or to ACC/ ACCESSORY. 2. Apply and hold the brake pedal. 3. Press the EPB switch momentarily. The EPB is released when the or PARK light is off. Y If the 8 light is on, release the EPB by pressing and holding the EPB switch. Continue to hold the switch until the Y or PARK light is off. If either light stays on after release is attempted, see your dealer. Caution Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving. Automatic EPB Release The EPB will automatically release if the vehicle is running, placed into gear, and an attempt is made to 199 drive away. Avoid rapid acceleration when the EPB is applied, to preserve parking brake lining life. If parking on a hill, or if the vehicle is pulling a trailer, see Driving Characteristics and Towing Tips 0 234. Brake Assist Brake Assist detects rapid brake pedal applications due to emergency braking situations and provides additional braking to activate the Antilock Brake System (ABS) if the brake pedal is not pushed hard enough to activate ABS normally. Minor noise, brake pedal pulsation, and/or pedal movement during this time may occur. Continue to apply the brake pedal as the driving situation dictates. Brake Assist disengages when the brake pedal is released. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 200 Driving and Operating Hill Start Assist (HSA) { Warning Do not rely on the HSA feature. HSA does not replace the need to pay attention and drive safely. You may not hear or feel alerts or warnings provided by this system. Failure to use proper care when driving may result in injury, death, or vehicle damage. See Defensive Driving 0 166. When the vehicle is stopped on a grade, Hill Start Assist (HSA) prevents the vehicle from rolling in an unintended direction during the transition from brake pedal release to accelerator pedal apply. The brakes release when the accelerator pedal is applied. If the accelerator pedal is not applied within a few minutes, the Electric Parking Brake will apply. The brakes may also release under other conditions. Do not rely on HSA to hold the vehicle. HSA is available when the vehicle is facing uphill in a forward gear, or when facing downhill in R (Reverse). The vehicle must come to a complete stop on a grade for HSA to activate. Ride Control Systems Traction Control/ Electronic Stability Control System Operation The vehicle has a Traction Control System (TCS) and StabiliTrak/ Electronic Stability Control (ESC), an electronic stability control system. These systems help limit wheel slip and assist the driver in maintaining control, especially on slippery road conditions. TCS activates if it senses that any of the drive wheels are spinning or beginning to lose traction. When this happens, TCS applies the brakes to the spinning wheels and reduces engine power to limit wheel spin. StabiliTrak/ESC activates when the vehicle senses a difference between the intended path and the direction the vehicle is actually traveling. StabiliTrak/ESC selectively applies braking pressure to any one of the Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating 201 vehicle wheel brakes to assist the driver in keeping the vehicle on the intended path. 2. Turn the engine off and wait 15 seconds. If cruise control is being used and TCS or StabiliTrak/ESC begins to limit wheel spin, cruise control will disengage. Cruise control may be turned back on when road conditions allow. TCS and StabiliTrak/ESC will automatically turn on when cruise control is set. 4. Drive the vehicle. Both systems come on automatically when the vehicle is started and begins to move. The systems may be heard or felt while they are operating or while performing diagnostic checks. This is normal and does not mean there is a problem with the vehicle. It is recommended to leave both systems on for normal driving conditions, but it may be necessary to turn TCS off if the vehicle gets stuck in sand, mud, ice, or snow. See If the Vehicle Is Stuck 0 176 and “Turning the Systems Off and On” later in this section. 3. Start the engine. The indicator light for both systems is in the instrument cluster. This light will: . Flash when TCS is limiting wheel spin. . Flash when StabiliTrak/ESC is activated. . Turn on and stay on when either system is not working. If either system fails to turn on or to activate, a message displays in the Driver Information Center (DIC), and d comes on and stays on to indicate that the system is inactive and is not assisting the driver in maintaining control. The vehicle is safe to drive, but driving should be adjusted accordingly. If d comes on and stays on: 1. Stop the vehicle. If d comes on and stays on, see your dealer. Turning the Systems Off and On Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 202 Driving and Operating Caution Do not repeatedly brake or accelerate heavily when TCS is off. The vehicle driveline could be damaged. To turn off only TCS, press and release g. The Traction Off light i displays in the instrument cluster and the appropriate DIC message displays. To turn TCS on again, press and release g. The Traction Off light i displayed in the instrument cluster will turn off. If TCS is limiting wheel spin when g is pressed, the system will not turn off until the wheels stop spinning. To turn off both TCS and StabiliTrak/ ESC, press and hold g until the Traction Off light i and StabiliTrak/ ESC OFF light g come on and stay on in the instrument cluster. The appropriate DIC message displays. To turn TCS and StabiliTrak/ESC on again, press and release g. The Traction Off light i and StabiliTrak/ ESC OFF light g in the instrument cluster turn off. StabiliTrak will automatically turn on if the vehicle exceeds 56 km/h (35 mph). Traction control will remain off. Adding accessories can affect the vehicle performance. See Accessories and Modifications 0 249. If equipped, the vehicle may have the following modes: All-Wheel Drive (AWD), Tour, Sport, and/or Tow/Haul. When not in AWD, the vehicle is in Front-Wheel Drive (FWD) which will provide better fuel economy. All drive modes may display indicator or mode on message in the Driver Information Center (DIC) except FWD. AWD Mode Driver Mode Control Driver Mode Control attempts to add a sportier feel, provide a more comfortable ride, or assist in different weather conditions or terrain. This system simultaneously changes the software calibration of various sub-systems. Depending on the option package, available features, and mode selected, the suspension, steering, and powertrain will change calibrations to achieve the desired mode characteristics. AWD Mode is intended for conditions which demand more traction. In AWD Mode, the AWD system delivers power to all four wheels and the system adjusts as Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating needed to improve traction. Pressing the AWD Mode switch will select AWD Mode. The AWD light will flash briefly while the system is engaging and stay on to indicate AWD is active. The AWD light will stay off when AWD is inactive. AWD Mode can be turned on and off independently of other modes. See All-Wheel Drive 0 197. MODE and change to the next mode. Subsequent presses will scroll through the available modes. Sport Mode If equipped, Sport Mode is used when road conditions or personal preference demand a more controlled response. When in Sport Mode, the steering and suspension will change to provide more precise control and better cornering performance. Sport Mode is only available on vehicles equipped with Real Time Damping. Sport Mode also changes the StabiliTrak and AWD settings to allow more wheel slip. Tow/Haul Mode To select the Sport Mode or Tow/ Haul Mode, press the MODE switch on the center stack. Pressing the MODE switch will display options of all available ride modes in the DIC If equipped, Tow/Haul Mode can assist when towing or hauling a heavy load. It changes transmission shift patterns, and increases trailer sway control assistance. See Driving Characteristics and Towing Tips 0 234. Tow/Haul Mode is available on vehicles with the Trailer Towing Package. 203 Cruise Control With cruise control the vehicle can maintain a speed of about 40 km/h (25 mph) or more without keeping your foot on the accelerator. Cruise control does not work at speeds below 40 km/h (25 mph). { Warning Cruise control can be dangerous where you cannot drive safely at a steady speed. Do not use cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction can cause excessive wheel slip, and you could lose control. Do not use cruise control on slippery roads. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 204 Driving and Operating If equipped with the Traction Control System (TCS), the system may begin to limit wheel spin while you are using cruise control. If this happens, the cruise control will automatically disengage. See Traction Control/Electronic Stability Control 0 200. If a collision alert occurs when cruise control is activated, cruise control is disengaged. See Forward Collision Alert (FCA) System 0 221. When road conditions allow you to safely use it again, cruise control can be turned back on. Cruise control will disengage if either TCS or StabiliTrak/Electronic Stability Control (ESC) is turned off. If the brakes are applied, cruise control disengages. * : Press to disengage cruise control without erasing the set speed from memory. The speedometer reading can be displayed in either English or metric units. See Instrument Cluster (Base Level) 0 111 or Instrument Cluster (Uplevel) 0 114. The increment value used depends on the units displayed. Setting Cruise Control 5 : Press to turn cruise control on or off. A white indicator comes on in the instrument cluster. RES+ : If there is a set speed in memory, press the control up briefly to resume to that speed or press and hold to accelerate. If cruise control is already engaged, use to increase vehicle speed. SET− : Press the control down briefly to set the speed and activate cruise control. If cruise control is already engaged, use to decrease vehicle speed. If 5 is on when not in use, SET− or RES+ could get pressed and go into cruise when not desired. Keep 5 off when cruise is not being used. 1. Press 5 to turn the cruise system on. 2. Get to the speed desired. 3. Press and release SET− . The desired set speed briefly appears in the instrument cluster. 4. Take your foot off the accelerator pedal. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating The cruise control indicator on the instrument cluster turns green after the cruise control has been set to the desired speed. See Instrument Cluster (Base Level) 0 111 or Instrument Cluster (Uplevel) 0 114. Resuming a Set Speed . To increase vehicle speed in small increments, press RES+ up briefly. For each press, the vehicle goes about 1 km/h (1 mph) faster. Reducing Speed While Using Cruise Control Once the vehicle reaches about 40 km/h (25 mph) or more, press RES+ up briefly. The vehicle returns to the previously set speed. Do one of the following: . Press and hold SET− down until the desired lower speed is reached, then release it. . To slow down in small increments, press SET− down briefly. For each press, the vehicle goes about 1 km/h (1 mph) slower. Increasing Speed While Using Cruise Control Passing Another Vehicle While Using Cruise Control Do one of the following: . Press and hold RES+ up until the vehicle accelerates to the desired speed, then release it. Use the accelerator pedal to increase the vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the previously set cruise speed. While pressing the accelerator pedal or shortly following the release to If the cruise control is set at a desired speed and then the brakes are applied or * is pressed, the cruise control is disengaged without erasing the set speed from memory. 205 override cruise control, briefly pressing SET− will result in cruise set to the current vehicle speed. Using Cruise Control on Hills How well the cruise control will work on hills depends upon the vehicle speed, load, and the steepness of the hills. When going up steep hills, you might have to step on the accelerator pedal to maintain your speed. When going downhill, you might have to brake or shift to a lower gear to keep your speed down. If the brake pedal is applied, cruise control will disengage. Ending Cruise Control There are four ways to end cruise control: . Step lightly on the brake pedal. *. . Press . Shift the transmission to N (Neutral). . To turn off cruise control, press 5. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 206 Driving and Operating Erasing Speed Memory The cruise control set speed is erased from memory if 5 is pressed or the ignition is turned off. Adaptive Cruise Control If equipped with Adaptive Cruise Control (ACC), it allows for selecting the cruise control set speed and following gap. Read this entire section before using this system. ACC uses a radar sensor to detect other vehicles. See Radio Frequency Statement 0 354. The following gap is the following time (or distance) between your vehicle and a vehicle detected directly ahead in your path, moving in the same direction. If no vehicle is detected in your path, ACC works like regular cruise control. If a vehicle is detected in your path, ACC can speed up the vehicle or apply limited, moderate braking to maintain the selected following gap. To disengage ACC, apply the brake. If the Traction Control System (TCS) or StabiliTrak/Electronic Stability Control (ESC) system activates while ACC is engaged, ACC may automatically disengage. See Traction Control/Electronic Stability Control 0 200. When road conditions allow ACC to be safely used, ACC can be turned back on. ACC will not engage if the TCS or StabiliTrak/ESC electronic stability control system is disabled. { Warning ACC has limited braking ability and may not have time to slow the vehicle down enough to avoid a collision with another vehicle you are following. This can occur when vehicles suddenly slow or stop ahead, or enter your lane. Also see “Alerting the Driver” in this section. Complete attention is always required while driving and you should be ready to take action and apply the brakes. See Defensive Driving 0 166. { Warning ACC will not detect or brake for children, pedestrians, animals, or other objects. Do not use ACC when: . On winding and hilly roads or when the sensors are blocked by snow, ice, or dirt. The system may not detect a vehicle ahead. Keep the entire front of the vehicle clean. . Visibility is low, such as in fog, rain, or snow conditions. ACC performance is limited under these conditions. . On slippery roads where fast changes in tire traction can cause excessive wheel slip. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating SET– : Press the control down briefly to set the speed and activate ACC or to decrease speed if ACC is already activated. To decrease speed by 1 km/h (1 mph), briefly press down toward SET-. To decrease speed to the next 5 km/h (5 mph) mark on the speedometer, press and hold down toward SET-, then release. 5 : Press to turn the system on or off. The indicator turns white on the instrument cluster when ACC is turned on. RES+ : Press the control up briefly to resume to a previously set speed or to increase vehicle speed if ACC is already activated. To increase speed by 1 km/h (1 mph), briefly press up toward RES+. To increase speed to the next 5 km/h (5 mph) mark on the speedometer, press and hold up toward RES+, then release. * : Press to disengage ACC without erasing the selected set speed. [ : Press to select a following gap time (or distance) setting for ACC of Far, Medium, or Near. The speedometer reading can be displayed in either English or metric units. See Instrument Cluster (Base Level) 0 111 or Instrument Cluster (Uplevel) 0 114. The increment value used depends on the units displayed. 207 Switching Between ACC and Regular Cruise Control To switch between ACC and regular cruise control, press and hold *. A Driver Information Center (DIC) message displays. ACC Indicator Regular Cruise Control Indicator When ACC is engaged, a green o indicator will be lit on the instrument cluster and the following gap will be displayed. When the regular cruise control is engaged, a green J indicator will be lit on the instrument cluster; the following gap will not display. When the vehicle is turned on, the cruise control mode will be set to the last mode used before the vehicle was turned off. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 208 Driving and Operating { Warning Always check the cruise control indicator on the instrument cluster to determine which mode cruise control is in before using the feature. If ACC is not active, the vehicle will not automatically brake for other vehicles, which could cause a crash if the brakes are not applied manually. You and others could be seriously injured or killed. Setting Adaptive Cruise Control To set ACC while moving: 2. Get up to the desired speed. Be mindful of speed limits, surrounding traffic speeds, and weather conditions when selecting the set speed. 3. Press and release SET–. Resuming a Set Speed 4. Remove your foot from the accelerator. If ACC is set at a desired speed and then the brakes are applied, ACC is disengaged without erasing the set speed from memory. 1. Press 5. After ACC is set, it may immediately apply the brakes if a vehicle ahead is detected closer than the selected following gap. ACC can also be set while the vehicle is stopped if ACC is on and the brake pedal is applied. If 5 is on when not in use, it could get pressed and go into ACC when not desired. Keep 5 off when cruise is not being used. Select the set speed desired for ACC. This is the vehicle speed when no vehicle is detected in its path. ACC will not set at a speed less than 25 km/h (15 mph), although it can be resumed when driving at lower speeds. The ACC indicator displays on the instrument cluster. When ACC is turned on, the indicator will be lit white. When ACC is engaged, the indicator will turn green. To begin using ACC again, press RES+ up briefly. . If the vehicle is moving, it returns to the previous set speed. . If the vehicle is stopped with the brake pedal applied, press RES+ and release the brake pedal. ACC will hold the vehicle until RES+ or the accelerator pedal is pressed. A green ACC indicator and the set speed display on the instrument cluster. The vehicle ahead indicator may be flashing if a vehicle ahead was present and moved. See “Approaching and Following a Vehicle” later in this section. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Once ACC has resumed, if there is no vehicle ahead, if the vehicle ahead is beyond the selected following gap, or if the vehicle has exited a sharp curve, then the vehicle speed will increase to the set speed. Increasing Speed While ACC is at a Set Speed Do one of the following: . Use the accelerator to get to the higher speed. Press SET– down. Release the control and the accelerator pedal. The vehicle will now cruise at the higher speed. When the accelerator pedal is pressed, ACC will not brake because it is overridden. The ACC indicator turns blue on the instrument cluster. . Press and hold RES+ up until the desired set speed appears on the display, then release it. . . To increase speed in small increments, briefly press RES+. For each press, the vehicle speed increases to the next 5 km/h (1 mph) mark on the speedometer. To increase vehicle speed in larger increments, hold RES+. While holding RES+, the vehicle speed increases to the next 5 km/h (5 mph) step, then continues to increase by 5 km/h (5 mph) at a time. The set speed can also be increased while the vehicle is stopped. . If stopped with the brake applied, press RES+ until the desired set speed is displayed. . If ACC is holding the vehicle at a stop and there is another vehicle directly ahead, pressing RES+ will increase the set speed. Pressing RES+ when there is no longer a vehicle ahead will cause ACC to resume. 209 Reducing Speed While ACC is at a Set Speed Do one of the following: . Use the brake to get to the desired lower speed. Press SET– down and release the accelerator pedal. The vehicle will now cruise at the lower speed. . Press and hold SET– down until the desired lower speed is reached, then release it. . To decrease the vehicle speed in smaller increments, press SET− down briefly. For each press, the vehicle speed decreases to the next 5 km/h (1 mph) mark on the speedometer. . To decrease the vehicle speed in larger increments, press and hold SET−. While holding SET−, the vehicle speed decreases to the next 5 km/h (5 mph) step, then continues to decrease by 5 km/h (5 mph) at a time. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 210 . Driving and Operating To decrease speed while the vehicle is stopped, press SET− until the desired set speed is displayed. Selecting the Follow Distance Gap When a slower moving vehicle is detected ahead within the selected following gap, ACC will adjust the vehicle's speed and attempt to maintain the follow distance gap selected. Press [ on the steering wheel to adjust the following gap. Each press cycles the gap button through three settings: Far, Medium, or Near. When pressed, the current gap setting displays briefly on the instrument cluster. The gap setting will be maintained until it is changed. Since each gap setting corresponds to a following time (Far, Medium, or Near), the following distance will vary based on vehicle speed. The faster the vehicle speed, the further back your vehicle will follow a vehicle detected ahead. Consider traffic and weather conditions when selecting the following gap. The range of selectable gaps may not be appropriate for all drivers and driving conditions. five times. See “Collision/Detection Systems” under Vehicle Personalization 0 137. Changing the gap setting automatically changes the alert timing sensitivity (Far, Medium, or Near) for the Forward Collision Alert (FCA) feature. See Forward Collision Alert (FCA) System 0 221. Approaching and Following a Vehicle See Defensive Driving 0 166. Alerting the Driver The vehicle ahead indicator is in the instrument cluster. If ACC is engaged, driver action may be required when ACC cannot apply sufficient braking because of approaching a vehicle too rapidly. When this condition occurs, a series of red lights will flash on the windshield. Either eight beeps will sound from the front, or both sides of the Safety Alert Seat will pulse The vehicle ahead indicator only displays when a vehicle is detected in your vehicle’s path moving in the same direction. If this indicator is not displaying, ACC will not respond to or brake to vehicles ahead. ACC automatically slows the vehicle down and adjusts vehicle speed to follow the vehicle in front at the selected following gap. The vehicle speed increases or decreases to Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating follow the vehicle in front of you, but will not exceed the set speed. It may apply limited braking, if necessary. When braking is active, the brake lamps will come on. The automatic braking may feel or sound different than if the brakes were applied manually. This is normal. Stationary or Very Slow-Moving Objects { Warning ACC may not detect and react to stopped or slow-moving vehicles ahead of you. For example, the system may not brake for a vehicle it has never detected moving. This can occur in stop-and-go traffic or when a vehicle suddenly appears due to a vehicle ahead changing lanes. Your vehicle may not stop and could cause a crash. Use caution when using ACC. Your complete attention is always required while (Continued) Warning (Continued) driving and you should be ready to take action and apply the brakes. 211 In some cases, when ACC will not activate, regular cruise control may be used. See “Switching Between ACC and Regular Cruise Control” previously in this section. Always consider driving conditions before using either cruise control system. ACC Automatically Disengages Notification to Resume ACC ACC may automatically disengage and you will need to manually apply the brakes to slow the vehicle if: . The sensors are blocked. ACC will maintain a following gap behind a detected vehicle and slow your vehicle to a stop behind that vehicle. . The Traction Control System (TCS) or StabiliTrak/ESC system has activated or been disabled. . There is a fault in the system. . The radar falsely reports blockage when driving in a desert or remote area with no other vehicles or roadside objects. A DIC message may display to indicate that ACC is temporarily unavailable. If the stopped vehicle ahead has driven away and ACC has not resumed, the vehicle ahead indicator will flash as a reminder to check traffic ahead before proceeding. In addition, the left and right sides of the Safety Alert Seat will pulse three times, or three beeps will sound. See “Alert Type” and “Adaptive Cruise Go Notifier” in “Collision/Detection Systems” under Vehicle Personalization 0 137. A message will appear on the DIC indicating that cruise is disengaging. The ACC active symbol will turn white when ACC is no longer active. When the vehicle ahead drives away, press RES+ or the accelerator pedal to resume cruise control. If stopped for more than Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 212 Driving and Operating two minutes or if the driver door is opened and the driver seat belt is unbuckled, ACC automatically applies the Electric Parking Brake (EPB) and the vehicle will shift to P (Park) to hold the vehicle. The EPB status light will turn on. See Electric Parking Brake 0 198. To resume ACC and release the EPB, press the accelerator pedal. A DIC warning message may display indicating to shift to P (Park) before exiting the vehicle. { Warning If ACC has stopped the vehicle, and if ACC is disengaged, turned off, or canceled, the vehicle will no longer be held at a stop. The vehicle can move. When ACC is holding the vehicle at a stop, always be prepared to manually apply the brakes. { Warning Leaving the vehicle without placing it in P (Park) can be dangerous. Do not leave the vehicle while it is being held at a stop by ACC. Always place the vehicle in P (Park) and turn off the ignition before leaving the vehicle. ACC Override If using the accelerator pedal while ACC is active, the ACC indicator turns blue on the instrument cluster. ACC will resume operation when the accelerator pedal is not being pressed. { Warning The ACC will not automatically apply the brakes if your foot is resting on the accelerator pedal. You could crash into a vehicle ahead of you. Curves in the Road { Warning On curves, ACC may not detect a vehicle ahead in your lane. You could be startled if the vehicle accelerates up to the set speed, especially when following a vehicle exiting or entering exit ramps. You could lose control of the vehicle or crash. Do not use ACC while driving on an entrance or exit ramp. Always be ready to use the brakes if necessary. { Warning On curves, ACC may respond to a vehicle in another lane, or may not have time to react to a vehicle in your lane. You could crash into a vehicle ahead of you, or lose control of your vehicle. Give extra attention in curves and be ready (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating 213 Other Vehicle Lane Changes Warning (Continued) to use the brakes if necessary. Select an appropriate speed while driving in curves. ACC may operate differently in a sharp curve. It may reduce the vehicle speed if the curve is too sharp. When following a vehicle and entering a curve, ACC may not detect the vehicle ahead and accelerate to the set speed. When this happens, the vehicle ahead indicator will not appear. ACC may detect a vehicle that is not in your lane and apply the brakes. ACC may occasionally provide an alert and/or braking that is considered unnecessary. It could respond to vehicles in different lanes, signs, guardrails, and other stationary objects when entering or exiting a curve. This is normal operation. The vehicle does not need service. ACC will not detect a vehicle ahead until it is completely in the lane. The brakes may need to be manually applied. Do Not Use ACC on Hills and When Towing a Trailer Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 214 Driving and Operating Do not use ACC when driving on steep hills or when towing a trailer. ACC will not detect a vehicle in the lane while driving on steep hills. The driver will often need to take over acceleration and braking on steep hills, especially when towing a trailer. If the brakes are applied, the ACC disengages. Disengaging ACC There are three ways to disengage ACC: . Step lightly on the brake pedal. . . *. Press 5. Press Erasing Speed Memory The cruise control set speed is erased from memory if 5 is pressed or if the ignition is turned off. Cleaning the Sensing System The radar sensor on the front of the vehicle can become blocked by snow, ice, dirt, or mud. This area needs to be cleaned for ACC to operate properly. If ACC will not operate, regular cruise control may be available. See “Switching Between ACC and Regular Cruise Control” previously in this section. Always consider driving conditions before using either cruise control system. For cleaning instructions, see “Washing the Vehicle” under Exterior Care 0 317. System operation may also be limited under snow, heavy rain, or road spray conditions. Driver Assistance Systems This vehicle may have features that work together to help avoid crashes or reduce crash damage while driving, backing, and parking. Read this entire section before using these systems. { Warning Do not rely on the Driver Assistance Systems. These systems do not replace the need for paying attention and driving safely. You may not hear or feel alerts or warnings provided by these systems. Failure to use proper care when driving may result in injury, death, or vehicle damage. See Defensive Driving 0 166. (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Warning (Continued) Under many conditions, these systems will not: . Detect children, pedestrians, bicyclists, or animals. . Detect vehicles or objects outside the area monitored by the system. . Work at all driving speeds. . Warn you or provide you with enough time to avoid a crash. . Work under poor visibility or bad weather conditions. . Work if the detection sensor is not cleaned or is covered by ice, snow, mud, or dirt. . Work if the detection sensor is covered up, such as with a sticker, magnet, or metal plate. (Continued) Warning (Continued) . Work if the area surrounding the detection sensor is damaged or not properly repaired. Complete attention is always required while driving, and you should be ready to take action and apply the brakes and/or steer the vehicle to avoid crashes. Audible or Safety Alert Seat Some driver assistance features alert the driver of obstacles by beeping. To change the volume of the warning chime, see “Comfort and Convenience” under Vehicle Personalization 0 137. If equipped with the Safety Alert Seat, the driver seat cushion may provide a vibrating pulse alert instead of beeping. To change this, see “Collision/Detection Systems” under Vehicle Personalization 0 137. 215 Cleaning Depending on vehicle options, keep these areas of the vehicle clean to ensure the best driver assistance feature performance. Driver Information Center (DIC) messages may display when the systems are unavailable or blocked. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 216 Driving and Operating Assistance Systems for Parking or Backing If equipped, the Rear Vision Camera (RVC), Rear Park Assist (RPA), Surround Vision, and Rear Cross Traffic Alert (RCTA) may help the driver park or avoid objects. Always check around the vehicle when parking or backing. Rear Vision Camera (RVC) . Front and rear bumpers and the area below the bumpers . Front grille and headlamps . Front camera lens in the front grille or near the front emblem . Front side and rear side panels . Outside of the windshield in front of the rearview mirror . Side camera lens on the bottom of the outside mirrors . Rear side corner bumpers . Rear Vision Camera above the license plate When the vehicle is shifted into R (Reverse), the RVC displays an image of the area behind the vehicle in the infotainment display. The previous screen displays when the vehicle is shifted out of R (Reverse) after a short delay. To return to the previous screen sooner, press any button on the infotainment system, shift into P (Park), or reach a vehicle speed of approximately 12 km/h (8 mph). The RVC is above the license plate. 1. View Displayed by the Camera 1. View Displayed by the Camera 2. Corners of the Rear Bumper Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Displayed images may be farther or closer than they appear. The area displayed is limited and objects that are close to either corner of the bumper or under the bumper do not display. A warning triangle may display to show that RPA has detected an object. This triangle changes from amber to red and increases in size the closer the object. Hitch Guidance If equipped, this feature displays a single, centered guideline on the camera display to assist with aligning a vehicle’s hitch ball with a trailer coupler. Select the trailer guidance line button, then align the trailer guidance line over the trailer coupler. Continuously steer the vehicle to keep the guidance line centered on the coupler when backing. RVC Park Assist overlays will not display when the trailer guidance line is active. Hitch Guidance is only available in Standard View. To check the trailer when in a forward gear above 12 km/h (8 mph), touch CAMERA on the infotainment display to view the rear camera. Touch X to exit the view or it will be removed automatically after eight seconds. { Warning Use Hitch Guidance only to help back the vehicle to a trailer hitch or, when traveling above 12 km/h (8 mph), to briefly check the status of your trailer. Do not use for any other purpose, such as making lane change decisions. Before making a lane change, always check the mirrors and glance over your shoulder. Improper use could result in serious injury to you or others. Surround Vision If equipped, Surround Vision shows an image of the area surrounding the vehicle, along with the front or rear camera views on the 217 infotainment display. The front camera is in the grille or near the front emblem, the side cameras are on the bottom of the outside mirrors, and the rear camera is above the license plate. The Surround Vision system can be accessed by selecting CAMERA in the infotainment display or when the vehicle is shifted into R (Reverse). To return to the previous screen sooner, press any button on the infotainment system, shift into P (Park), or reach a vehicle speed of approximately 12 km/h (8 mph). { Warning The Surround Vision cameras have blind spots and will not display all objects near the corners of the vehicle. Folding outside mirrors that are out of position may not display surround view correctly. Always check around the vehicle when parking or backing. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 218 Driving and Operating { Warning 1. Views Displayed by the Surround Vision Cameras 2. Area Not Shown 1. Views Displayed by the Surround Vision Cameras 2. Area Not Shown The camera(s) do not display children, pedestrians, bicyclists, crossing traffic, animals, or any other object outside of the cameras’ field of view, below the bumper, or under the vehicle. Shown distances may be different from actual distances. Do not drive or park the vehicle using only these camera(s). Always check behind and around the vehicle before driving. Failure to use proper care may result in injury, death, or vehicle damage. Camera Views Touch the camera view buttons along the bottom of the infotainment display. Available views will differ depending on vehicle options. Front/Rear Standard View : Displays an image of the area in front or behind the vehicle. Touch Front/Rear Standard View on the infotainment display when a camera view is active. Touching the button multiple times will toggle between front and rear camera views. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating If equipped, the front view camera also displays when the Park Assist system detects an object within 30 cm (12 in). Front/Rear Junction View : Displays a front or rear cross traffic view that shows objects directly to the left and right of the front or back of the vehicle. Touch Junction View on the infotainment display when a camera view is active. Touching the button multiple times will toggle between front and rear camera views. Front/Rear Overhead View : Displays a front or rear overhead view of the vehicle. Touching the button will toggle between the two views. Front/Rear Bowl View : Displays a view of the vehicle from either the front or the back of the vehicle. Touch Bowl View on the infotainment display when a camera view is active. Touching the button multiple times will toggle between forward and rearward views. Park Assist and RCTA overlays are not available when Bowl View is active. Side Forward/Rearward View : Displays a view that shows objects next to the front or rear sides of the vehicle. Touch Side Forward/ Rearward View on the infotainment display when a camera view is active. Touching the button multiple times will toggle between forward and rearward views. Park Assist and RCTA overlays are not available when Side Forward/ Rearward View is active. Hitch View : Assists while connecting to a trailer. Displays a zoomed-in view of the hitch to help align the vehicle’s hitch ball with the trailer coupler. Shifting into P (Park) while in this view will automatically engage the Electronic Parking Brake (EPB). Guidance Lines : Displays available guidelines, including standard and Hitch Guidance. Top Down View : Displays an image of the area surrounding the vehicle, along with the rear camera view in the infotainment display. The rear camera view will be replaced by the front camera view after 219 shifting from R (Reverse) to a forward gear or when the vehicle is moving forward slower than 12 km/h (8 mph). This view can only be enabled in Front/Rear Standard View by touching the Top Down View button when a camera view is active. Park Assist With RPA, as the vehicle backs up at speeds of less than 8 km/h (5 mph), the sensors on the rear bumper may detect objects up to 2.5 m (8 ft) behind the vehicle within a zone 25 cm (10 in) high off the ground and below bumper level. These detection distances may be shorter during warmer or humid weather. Blocked sensors will not detect objects and can also cause false detections. Keep the sensors clean of mud, dirt, snow, ice, and slush; and clean sensors after a car wash in freezing temperatures. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 220 Driving and Operating { Warning The Park Assist system does not detect children, pedestrians, bicyclists, animals, or objects below the bumper or that are too close or too far from the vehicle. It is not available at speeds greater than 8 km/h (5 mph). To prevent injury, death, or vehicle damage, even with Park Assist, always check the area around the vehicle and check all mirrors before backing. The instrument cluster may have a Park Assist display with bars that show “distance to object” and object location information for RPA. As the object gets closer, more bars light up and the bars change color from yellow to amber to red. from the back of the vehicle do not move further back when a trailer is towed. When an object is first detected in the rear, one beep will be heard from the rear, or both sides of the Safety Alert Seat will pulse two times. When an object is very close, <0.6 m (2 ft) in the vehicle rear, five beeps will sound from the rear, or both sides of the Safety Alert Seat will pulse five times. Turning the Features On or Off Rear Cross Traffic Alert (RCTA) If equipped, RCTA shows a red warning triangle with a left or right pointing arrow on the infotainment display to warn of traffic coming from the left or right. This system detects objects coming from up to 20 m (65 ft) from the left or right side of the vehicle. When an object is detected, three beeps sound from the left or right, depending on the direction of the detected vehicle. Use caution while backing up when towing a trailer, as the RCTA detection zones that extend out To turn RPA on or off, press X on the center console. The indicator light next to the button comes on when the features are on and turns off when the features have been disabled. RCTA and Rear Park Assist symbols can be turned on or off through vehicle personalization. See “Collision/Detection Systems” under Vehicle Personalization 0 137. Turn off RPA when towing a trailer. Assistance Systems for Driving If equipped, when driving the vehicle in a forward gear, Forward Collision Alert (FCA), Lane Departure Warning (LDW), Lane Keep Assist (LKA), Side Blind Zone Alert (SBZA), Lane Change Alert (LCA), Automatic Emergency Braking (AEB), and/or the Front Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Pedestrian Braking (FPB) System can help to avoid a crash or reduce crash damage. Forward Collision Alert (FCA) System If equipped, the FCA system may help to avoid or reduce the harm caused by front-end crashes. When approaching a vehicle ahead too quickly, FCA provides a red flashing alert on the windshield and rapidly beeps or pulses the driver seat. FCA also lights an amber visual alert if following another vehicle much too closely. FCA detects vehicles within a distance of approximately 60 m (197 ft) and operates at speeds above 8 km/h (5 mph). If the vehicle has Adaptive Cruise Control (ACC), it can detect vehicles to distances of approximately 110 m (360 ft) and operates at all speeds. See Adaptive Cruise Control 0 206. { Warning FCA is a warning system and does not apply the brakes. When approaching a slower-moving or stopped vehicle ahead too rapidly, or when following a vehicle too closely, FCA may not provide a warning with enough time to help avoid a crash. It also may not provide any warning at all. FCA does not warn of pedestrians, animals, signs, guardrails, bridges, construction barrels, or other objects. Be ready to take action and apply the brakes. See Defensive Driving 0 166. FCA can be disabled through vehicle personalization. See “Collision/Detection Systems” under Vehicle Personalization 0 137. 221 Detecting the Vehicle Ahead FCA warnings will not occur unless the FCA system detects a vehicle ahead. When a vehicle is detected, the vehicle ahead indicator will display green. Vehicles may not be detected on curves, highway exit ramps, or hills, due to poor visibility; or if a vehicle ahead is partially blocked by pedestrians or other objects. FCA will not detect another vehicle ahead until it is completely in the driving lane. { Warning FCA does not provide a warning to help avoid a crash, unless it detects a vehicle. FCA may not detect a vehicle ahead if the FCA sensor is blocked by dirt, snow, (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 222 Driving and Operating Warning (Continued) or ice, or if the windshield is damaged. It may also not detect a vehicle on winding or hilly roads, or in conditions that can limit visibility such as fog, rain, or snow, or if the headlamps or windshield are not cleaned or in proper condition. Keep the windshield, headlamps, and FCA sensors clean and in good repair. When this Collision Alert occurs, the brake system may prepare for driver braking to occur more rapidly which can cause a brief, mild deceleration. Continue to apply the brake pedal as needed. Cruise control may be disengaged when the Collision Alert occurs. Tailgating Alert Collision Alert The vehicle ahead indicator will display amber when you are following a vehicle ahead too closely. Selecting the Alert Timing When your vehicle approaches another detected vehicle too rapidly, the red FCA display will flash on the windshield. Also, eight rapid high-pitched beeps will sound from the front, or both sides of the Safety Alert Seat will pulse five times. The Collision Alert control is on the steering wheel. Press [ to set the FCA timing to Far, Medium, or Near. The first button press shows the current setting on the DIC. Additional button presses will change this setting. The chosen setting will remain until it is changed and will affect the timing of both the Collision Alert and the Tailgating Alert features. The timing of both alerts will vary based on vehicle speed. The faster the vehicle speed, the farther away the alert will occur. Consider traffic and weather conditions when selecting the alert timing. The range of selectable alert timings may not be appropriate for all drivers and driving conditions. If your vehicle is equipped with Adaptive Cruise Control (ACC), changing the FCA timing setting automatically changes the following gap setting (Far, Medium, or Near). Following Distance Indicator The following distance to a moving vehicle ahead in your path is indicated in following time in seconds on the Driver Information Center (DIC). See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. The minimum following time is 0.5 seconds away. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating If there is no vehicle detected ahead, or the vehicle ahead is out of sensor range, dashes will be displayed. Unnecessary Alerts FCA may provide unnecessary alerts for turning vehicles, vehicles in other lanes, objects that are not vehicles, or shadows. These alerts are normal operation and the vehicle does not need service. Cleaning the System If the FCA system does not seem to operate properly, this may correct the issue: . Clean the outside of the windshield in front of the rearview mirror. . Clean the entire front of the vehicle. . Clean the headlamps. Automatic Emergency Braking (AEB) If the vehicle has Forward Collision Alert (FCA), it also has AEB, which includes Intelligent Brake Assist (IBA). When the system detects a vehicle ahead in your path that is traveling in the same direction that you may be about to crash into, it can provide a boost to braking or automatically brake the vehicle. This can help avoid or lessen the severity of crashes when driving in a forward gear. Depending on the situation, the vehicle may automatically brake moderately or hard. This automatic emergency braking can only occur if a vehicle is detected. This is shown by the FCA vehicle ahead indicator being lit. See Forward Collision Alert (FCA) System 0 221. The system works when driving in a forward gear between 8 km/h (5 mph) and 80 km/h (50 mph), or on vehicles with Adaptive Cruise Control (ACC), above 4 km/h (2 mph). It can detect vehicles up to approximately 60 m (197 ft). 223 { Warning AEB is an emergency crash preparation feature and is not designed to avoid crashes. Do not rely on AEB to brake the vehicle. AEB will not brake outside of its operating speed range and only responds to detected vehicles. AEB may not: . Detect a vehicle ahead on winding or hilly roads. . Detect all vehicles, especially vehicles with a trailer, tractors, muddy vehicles, etc. . Detect a vehicle when weather limits visibility, such as in fog, rain, or snow. . Detect a vehicle ahead if it is partially blocked by pedestrians or other objects. (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 224 Driving and Operating Warning (Continued) Complete attention is always required while driving, and you should be ready to take action and apply the brakes and/or steer the vehicle to avoid crashes. AEB may slow the vehicle to a complete stop to try to avoid a potential crash. If this happens, AEB may engage the Electric Parking Brake (EPB) to hold the vehicle at a stop. Release the EPB or firmly press the accelerator pedal. { Warning AEB may automatically brake the vehicle suddenly in situations where it is unexpected and undesired. It could respond to a turning vehicle ahead, guardrails, signs, and other non-moving objects. To override AEB, firmly press the accelerator pedal, if it is safe to do so. Intelligent Brake Assist (IBA) IBA may activate when the brake pedal is applied quickly by providing a boost to braking based on the speed of approach and distance to a vehicle ahead. Minor brake pedal pulsations or pedal movement during this time is normal and the brake pedal should continue to be applied as needed. IBA will automatically disengage only when the brake pedal is released. { Warning IBA may increase vehicle braking in situations when it may not be necessary. You could block the flow of traffic. If this occurs, take your foot off the brake pedal and then apply the brakes as needed. AEB and IBA can be disabled through vehicle personalization. See “Collision/Detection Systems” under Vehicle Personalization 0 137. { Warning Using AEB or IBA while towing a trailer could cause you to lose control of the vehicle and crash. Turn the system to Alert, or if the vehicle has ACC to Off, when towing a trailer. A system unavailable message may display if: . The front of the vehicle or windshield is not clean. . Heavy rain or snow is interfering with object detection. . There is a problem with the StabiliTrak/Electronic Stability Control (ESC) system. The AEB system does not need service. Front Pedestrian Braking (FPB) System If equipped, the FPB system may help avoid or reduce the harm caused by front-end crashes with Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating nearby pedestrians when driving in a forward gear. FPB displays an amber indicator, ~, when a nearby pedestrian is detected ahead. When approaching a detected pedestrian too quickly, FPB provides a red flashing alert on the windshield and rapidly beeps or pulses the driver seat. FPB can provide a boost to braking or automatically brake the vehicle. This system includes Intelligent Brake Assist (IBA), and the Automatic Emergency Braking (AEB) system may also respond to pedestrians. See Automatic Emergency Braking (AEB) 0 223. The FPB system can detect and alert to pedestrians in a forward gear at speeds between 8 km/h (5 mph) and 80 km/h (50 mph). During daytime driving, the system detects pedestrians up to a distance of approximately 40 m (131 ft). During nighttime driving, system performance is very limited. { Warning FPB does not provide an alert or automatically brake the vehicle, unless it detects a pedestrian. FPB may not detect pedestrians, including children: . When the pedestrian is not directly ahead, fully visible, or standing upright, or when part of a group. . Due to poor visibility, including nighttime conditions, fog, rain, or snow. . If the FPB sensor is blocked by dirt, snow, or ice. . If the headlamps or windshield are not cleaned or in proper condition. Be ready to take action and apply the brakes. For more information, see Defensive Driving 0 166. Keep the windshield, headlamps, and FPB sensor clean and in good repair. 225 FPB can be set to Off, Alert, or Alert and Brake through vehicle personalization. See “Collision/ Detection Systems” under Vehicle Personalization 0 137. Detecting the Pedestrian Ahead FPB alerts and automatic braking will not occur unless the FPB system detects a pedestrian. When a nearby pedestrian is detected in front of the vehicle, the pedestrian ahead indicator will display amber. Front Pedestrian Alert Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 226 Driving and Operating When the vehicle approaches a pedestrian ahead too rapidly, the red FPB alert display will flash on the windshield. Eight rapid high-pitched beeps will sound from the front, or both sides of the Safety Alert Seat will pulse five times. When this Pedestrian Alert occurs, the brake system may prepare for driver braking to occur more rapidly which can cause a brief, mild deceleration. Continue to apply the brake pedal as needed. Cruise control may be disengaged when the Front Pedestrian Alert occurs. Automatic Braking If FPB detects it is about to crash into a pedestrian directly ahead, and the brakes have not been applied, FPB may automatically brake moderately or brake hard. This can help to avoid some very low speed pedestrian crashes or reduce pedestrian injury. FPB can automatically brake to detected pedestrians between 8 km/h (5 mph) and 80 km/h (50 mph). Automatic braking levels may be reduced under certain conditions, such as higher speeds. If this happens, Automatic Braking may engage the Electric Parking Brake (EPB) to hold the vehicle at a stop. Release the EPB. A firm press of the accelerator pedal will also release Automatic Braking and the EPB. { Warning FPB may alert or automatically brake the vehicle suddenly in situations where it is unexpected and undesired. It could falsely alert or brake for objects similar in shape or size to pedestrians, including shadows. This is normal operation and the vehicle does not need service. To override Automatic Braking, firmly press the accelerator pedal, if it is safe to do so. Automatic Braking can be disabled through vehicle personalization. See “Front Pedestrian Detection” in “Collision/Detection Systems” under Vehicle Personalization 0 137. { Warning Using the Front Pedestrian Braking system while towing a trailer could cause you to lose control of the vehicle and crash. Turn the system to Alert or Off when towing a trailer. Cleaning the System If FPB does not seem to operate properly, cleaning the outside of the windshield in front of the rearview mirror may correct the issue. Side Blind Zone Alert (SBZA) If equipped, the SBZA system is a lane-changing aid that assists drivers with avoiding crashes that occur with moving vehicles in the side blind zone (or spot) areas. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating When the vehicle is in a forward gear, the left or right side mirror display will light up if a moving vehicle is detected in that blind zone. If the turn signal is activated and a vehicle is also detected on the same side, the display will flash as an extra warning not to change lanes. Since this system is part of the Lane Change Alert (LCA) system, read the entire LCA section before using this feature. Lane Change Alert (LCA) If equipped, the LCA system is a lane-changing aid that assists drivers with avoiding lane change crashes that occur with moving vehicles in the side blind zone (or spot) areas or with vehicles rapidly approaching these areas from behind. The LCA warning display will light up in the corresponding outside mirror and will flash if the turn signal is on. { Warning LCA does not alert the driver to vehicles outside of the system detection zones, pedestrians, bicyclists, or animals. It may not provide alerts when changing lanes under all driving conditions. Failure to use proper care when changing lanes may result in injury, death, or vehicle damage. Before making a lane change, always check mirrors, glance over your shoulder, and use the turn signals. LCA Detection Zones 1. SBZA Detection Zone 227 2. LCA Detection Zone The LCA sensor covers a zone of approximately one lane over from both sides of the vehicle, or 3.5 m (11 ft). The height of the zone is approximately between 0.5 m (1.5 ft) and 2 m (6 ft) off the ground. The Side Blind Zone Alert (SBZA) warning area starts at approximately the middle of the vehicle and goes back 5 m (16 ft). Drivers are also warned of vehicles rapidly approaching from up to 70 m (230 ft) behind the vehicle. How the System Works The LCA symbol lights up in the outside mirrors when the system detects a moving vehicle in the next lane over that is in the side blind zone or rapidly approaching that zone from behind. A lit LCA symbol indicates it may be unsafe to change lanes. Before making a lane change, check the LCA display, check mirrors, glance over your shoulder, and use the turn signals. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 228 Driving and Operating When the System Does Not Seem to Work Properly Left Outside Mirror Display Right Outside Mirror Display When the vehicle is started, both outside mirror LCA displays will briefly come on to indicate the system is operating. When the vehicle is in a forward gear, the left or right outside mirror display will light up if a moving vehicle is detected in the next lane over in that blind zone or rapidly approaching that zone. If the turn signal is activated in the same direction as a detected vehicle, this display will flash as an extra warning not to change lanes. LCA can be disabled. When you disable LCA, Side Blind Zone Alert is also disabled. See “Collision/ Detection Systems” under Vehicle Personalization 0 137. If LCA is disabled by the driver, the LCA mirror displays will not light up. The LCA system requires some driving for the system to calibrate to maximum performance. This calibration may occur more quickly if the vehicle is driving on a straight highway road with traffic and roadside objects (e.g., guardrails, barriers). LCA displays may not come on when passing a vehicle quickly, for a stopped vehicle, or when towing a trailer. The LCA detection zones that extend back from the side of the vehicle do not move further back when a trailer is towed. Use caution while changing lanes when towing a trailer. LCA may alert to objects attached to the vehicle, such as a trailer, bicycle, or object extending out to either side of the vehicle. Attached objects may also interfere with the detection of vehicles. This is normal system operation; the vehicle does not need service. LCA may not always alert the driver to vehicles in the next lane over, especially in wet conditions or when driving on sharp curves. The system does not need to be serviced. The system may light up due to guardrails, signs, trees, shrubs, and other non-moving objects. This is normal system operation; the vehicle does not need service. LCA may not operate when the LCA sensors in the left or right corners of the rear bumper are covered with mud, dirt, snow, ice, or slush, or in heavy rainstorms. For cleaning instructions, see "Washing the Vehicle" under Exterior Care 0 317. If the DIC still displays the system unavailable message after cleaning both sides of the vehicle toward the rear corners of the vehicle, see your dealer. If the LCA displays do not light up when moving vehicles are in the side blind zone or are rapidly approaching this zone and the system is clean, the system may need service. Take the vehicle to your dealer. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Radio Frequency Information See Radio Frequency Statement 0 354. Lane Keep Assist (LKA) If equipped, LKA may help avoid crashes due to unintentional lane departures. This system uses a camera to detect lane markings between 60 km/h (37 mph) and 180 km/h (112 mph). It may assist by gently turning the steering wheel if the vehicle approaches a detected lane marking. It may also provide a Lane Departure Warning (LDW) alert if the vehicle crosses a detected lane marking. LKA can be overriden by turning the steering wheel. This system is not intended to keep the vehicle centered in the lane. LKA will not assist and alert if the turn signal is active in the direction of lane departure, or if it detects that you are accelerating, braking or actively steering. 229 { Warning Warning (Continued) The LKA system does not continuously steer the vehicle. It may not keep the vehicle in the lane or give a Lane Departure Warning (LDW) alert, even if a lane marking is detected. If LKA only detects lane markings on one side of the road, it will only assist or provide an LDW alert when approaching the lane on the side where it has detected a lane marking. Even with LKA and LDW, you must steer the vehicle. Always keep your attention on the road and maintain proper vehicle position within the lane, or vehicle damage, injury, or death could occur. Always keep the windshield, headlamps, and camera sensors clean and in good repair. Do not use LKA in bad weather conditions or on roads with unclear lane markings, such as construction zones. The LKA and LDW systems may not: . Provide an alert or enough steering assist to avoid a lane departure or crash. . Detect lane markings under poor weather or visibility conditions. This can occur if the windshield or headlamps are blocked by dirt, snow, or ice; if they are not in proper condition; or if the sun shines directly into the camera. . Detect road edges. . Detect lanes on winding or hilly roads. (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 230 Driving and Operating { Warning Using LKA while towing a trailer or on slippery roads could cause loss of control of the vehicle and a crash. Turn the system off. How the System Works LKA uses a camera sensor installed on the windshield ahead of the rearview mirror to detect lane markings. It may provide brief steering assist if it detects an unintended lane departure. It may further provide an audible alert or the driver seat may pulse indicating that a lane marking has been crossed. To turn LKA on and off, press A on the center stack. If equipped, the indicator light on the button comes on when LKA is on and turns off when LKA is disabled. A is green if LKA is ready to assist. LKA may assist by gently turning the steering wheel if the vehicle approaches a detected lane marking. A is amber when assisting. It may also provide a Lane Departure Warning (LDW) alert by flashing A amber if the vehicle crosses a detected lane marking. Additionally, there may be three beeps, or the driver seat may pulse three times, on the right or left, depending on the lane departure direction. Take Steering The LKA system does not continuously steer the vehicle. If LKA does not detect active driver steering, an alert and chime may be provided. Steer the vehicle to dismiss. LKA may become temporarily unavailable after repeated take steering alerts. When the System Does Not Seem to Work Properly The system performance may be affected by: . Close vehicles ahead. . Sudden lighting changes, such as when driving through tunnels. . Banked roads. . Roads with poor lane markings, such as two-lane roads. A system unavailable message may display if the camera is blocked. The LKA system does not need service. A camera blocked message may display if the camera is blocked. Some driver assistance systems may have reduced performance or not work at all. An LKA or LDW unavailable message may display if the systems are temporarily unavailable. This message could be due to a blocked camera. The LKA system does not need service. Clean the outside of the windshield behind the rearview mirror. LKA assistance and/or LDW alerts may occur due to tar marks, shadows, cracks in the road, temporary or construction lane markings, or other road imperfections. This is normal system operation; the vehicle does not need service. Turn LKA off if these conditions continue. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Fuel Recommended Fuel Top Tier Fuel GM recommends the use of TOP TIER Detergent Gasoline to keep the engine clean, reduce engine deposits, and maintain optimal vehicle performance. Look for the TOP TIER Logo or see www.toptiergas.com for a list of TOP TIER Detergent Gasoline marketers and applicable countries. 231 Prohibited Fuels Caution Use regular unleaded gasoline meeting ASTM specification D4814 with a posted octane rating of 87 — (R+M)/2 — or higher. Do not use gasoline with a posted octane rating of less than 87, as this may cause engine knock and will lower fuel economy. Do not use any fuel labeled E85 or FlexFuel. Do not use gasoline with ethanol levels greater than 15% by volume. Do not use fuels with any of the following conditions; doing so may damage the vehicle and void its warranty: . For vehicles that are not FlexFuel, fuel labeled greater than 15% ethanol by volume, such as mid-level ethanol blends (16–50% ethanol), E85, or FlexFuel. . Fuel with any amount of methanol, methylal, ferrocene, and aniline. These fuels can corrode metal fuel system parts or damage plastic and rubber parts. . Fuel containing metals such as methylcyclopentadienyl manganese tricarbonyl (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 232 Driving and Operating Caution (Continued) (MMT), which can damage the emissions control system and spark plugs. . Fuel with a posted octane rating of less than the recommended fuel. Using this fuel will lower fuel economy and performance, and may decrease the life of the emissions catalyst. Fuels in Foreign Countries The U.S., Canada, and Mexico post fuel octane ratings in anti-knock index (AKI). For fuel not to use in a foreign country, see Prohibited Fuels 0 231. Fuel Additives TOP TIER Detergent Gasoline is highly recommended for use with your vehicle. If your country does not have TOP TIER Detergent Gasoline, add ACDelco Fuel System Treatment Plus−Gasoline to the vehicle’s gasoline fuel tank at every oil change or 15 000 km (9,000 mi), whichever occurs first. TOP TIER Detergent Gasoline and ACDelco Fuel System Treatment Plus−Gasoline will help keep your vehicle’s engine fuel deposit free and performing optimally. Filling the Tank An arrow on the fuel gauge indicates which side of the vehicle the fuel door is on. See Fuel Gauge 0 117. { Warning Fuel vapors and fuel fires burn violently and can cause injury or death. Follow these guidelines to help avoid injuries to you and others: . Read and follow all the instructions on the fuel pump island. (Continued) Warning (Continued) . Turn off the engine when refueling. . Keep sparks, flames, and smoking materials away from fuel. . Do not leave the fuel pump unattended. . Avoid using electronic devices while refueling. . Do not re-enter the vehicle while pumping fuel. . Keep children away from the fuel pump and never let children pump fuel. . Before touching the fill nozzle, touch a metallic object to discharge static electricity from your body. . Fuel can spray out if the fill nozzle is inserted too quickly. This spray can happen if the tank is nearly full, and is more likely in hot (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating { Warning Warning (Continued) weather. Insert the fill nozzle slowly and wait for any hiss noise to stop before beginning to flow fuel. Overfilling the fuel tank by more than three clicks of a standard fill nozzle may cause: . Vehicle performance issues, including engine stalling and damage to the fuel system. . Fuel spills. . To open the fuel door, push and release the rearward center edge of the door. The capless refueling system does not have a fuel cap. Fully insert and latch the fill nozzle, begin fueling. Under certain conditions, fuel fires. Be careful not to spill fuel. Wait five seconds after you have finished pumping before removing the fill nozzle. Clean fuel from painted surfaces as soon as possible. See Exterior Care 0 317. Push the fuel door closed until it latches. { Warning If a fire starts while you are refueling, do not remove the fill nozzle. Shut off the flow of fuel by (Continued) 233 Warning (Continued) shutting off the pump or by notifying the station attendant. Leave the area immediately. Filling the Tank with a Portable Fuel Container If the vehicle runs out of fuel and must be filled from a portable fuel container: 1. Locate the capless funnel adapter from the rear cargo area under the load floor tray. 2. Insert and latch the funnel into the capless fuel system. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 234 Driving and Operating { Warning Attempting to refuel from a portable fuel container without using the funnel adapter may cause fuel spillage and damage the capless fuel system. This could cause a fire. You or others could be badly burned and the vehicle could be damaged. 3. Remove and clean the funnel adapter and return it to the storage location. Filling a Portable Fuel Container { Warning Never fill a portable fuel container while it is in the vehicle. Static electricity discharge from the container can ignite the fuel vapor. You or others could be (Continued) Warning (Continued) badly burned and the vehicle could be damaged. To help avoid injury to you and others: . Dispense fuel only into approved containers. . Do not fill a container while it is inside a vehicle, in a vehicle's trunk, in a pickup bed, or on any surface other than the ground. . Bring the fill nozzle in contact with the inside of the fill opening before operating the nozzle. Maintain contact until filling is complete. . Keep sparks, flames, and smoking materials away from fuel. . Do not use electronic devices while pumping fuel. Trailer Towing General Towing Information Only use towing equipment that has been designed for the vehicle. Contact your dealer or trailering dealer for assistance with preparing the vehicle to tow a trailer. Read the entire section before towing a trailer. To tow a disabled vehicle, see Towing the Vehicle 0 313. To tow the vehicle behind another vehicle such as a motor home, see Recreational Vehicle Towing 0 314. Driving Characteristics and Towing Tips { Warning You can lose control when towing a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy or the (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Warning (Continued) trailer brakes are inadequate for the load, the vehicle may not stop as expected. You and others could be seriously injured. The vehicle may also be damaged, and the repairs would not be covered by the vehicle warranty. Pull a trailer only if all the steps in this section have been followed. Ask your dealer for advice and information about towing a trailer with the vehicle. Driving with a Trailer Trailering is different than just driving the vehicle by itself. Trailering means changes in handling, acceleration, braking, durability, and fuel economy. Successful, safe trailering takes correct equipment, and it has to be used properly. The following information has many time-tested, important trailering tips and safety rules. Many of these are important for your safety and that of your passengers. Read this section carefully before pulling a trailer. When towing a trailer: . Become familiar with and follow all state and local laws that apply to trailer towing. These requirements vary from state to state. . State laws may require the use of extended side view mirrors. Even if not required, you should install extended side view mirrors if your visibility is limited or restricted while towing. . Do not tow a trailer during the first 800 km (500 mi) of vehicle use to prevent damage to the engine, axle, or other parts. . It is recommended to perform the first oil change before heavy towing. . During the first 800 km (500 mi) of trailer towing, do not drive over 80 km/h (50 mph) and do not make starts at full throttle. . 235 Vehicles can tow in D (Drive). Tow/Haul Mode is recommended for heavier trailers. See Tow/ Haul Mode 0 196. If the transmission downshifts too often, a lower gear may be selected using Manual Mode See Manual Mode 0 196. If equipped, the following driver assistance features should be turned off when towing a trailer: . Adaptive Cruise Control (ACC) . Super Cruise Control . Lane Keep Assist (LKA) . Park Assist . Automatic Parking Assist (APA) . Reverse Automatic Braking (RAB) If equipped, the following driver assistance features should be turned to alert or off when towing a trailer: . Automatic Emergency Braking (AEB) . Intelligent Brake Assist (IBA) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 236 . Driving and Operating Front Pedestrian Braking (FPB) If equipped with Lane Change Alert (LCA), the LCA detection zones that extend back from the side of the vehicle do not move further back when a trailer is towed. Use caution while changing lanes when towing a trailer. If equipped with Rear Cross Traffic Alert (RCTA), use caution while backing up when towing a trailer, as the RCTA detection zones that extend out from the back of the vehicle do not move further back when a trailer is towed. { Warning To prevent serious injury or death from carbon monoxide (CO), when towing a trailer: . Do not drive with the liftgate, trunk/hatch, or rear-most window open. (Continued) Warning (Continued) . Fully open the air outlets on or under the instrument panel. . Adjust the climate control system to a setting that brings in only outside air. See “Climate Control Systems” in the Index. For more information about carbon monoxide, see Engine Exhaust 0 190. Towing a trailer requires experience. The combination of the vehicle and trailer is longer and not as responsive as the vehicle itself. Get used to the handling and braking of the combination by driving on a level road surface before driving on public roads. The trailer structure, the tires, and the brakes must be all be rated to carry the intended cargo. Inadequate trailer equipment can cause the combination to operate in an unexpected or unsafe manner. Before driving, inspect all trailer hitch parts and attachments, safety chains, electrical connectors, lamps, tires, and mirrors. See Towing Equipment 0 241. If the trailer has electric brakes, start the combination moving and then manually apply the trailer brake controller to check the trailer brakes work. During the trip, occasionally check that the cargo and trailer are secure and that the lamps and any trailer brakes are working. Towing with a Stability Control System When towing, the stability control system might be heard. The system reacts to vehicle movement caused by the trailer, which mainly occurs during cornering. This is normal when towing heavier trailers. Following Distance Stay at least twice as far behind the vehicle ahead as you would when driving without a trailer. This can help to avoid heavy braking and sudden turns. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Passing More passing distance is needed when towing a trailer. The combination of the vehicle and trailer will not accelerate as quickly and is much longer than the vehicle alone. It is necessary to go much farther beyond the passed vehicle before returning to the lane. Pass on level roadways. Avoid passing on hills if possible. Backing Up Hold the bottom of the steering wheel with one hand. To move the trailer to the left, move that hand to the left. To move the trailer to the right, move that hand to the right. Always back up slowly and, if possible, have someone guide you. Making Turns Caution Turn more slowly and make wider arcs when towing a trailer to prevent damage to your vehicle. Making very sharp turns could cause the trailer to contact the vehicle. Make wider turns than normal when towing, so trailer will not go over soft shoulders, over curbs, or strike road signs, trees, or other objects. Always signal turns well in advance. Do not steer or brake suddenly. Driving on Grades Reduce speed and shift to a lower gear before starting down a long or steep downhill grade. If the transmission is not shifted down, the brakes may overheat and result in reduced braking efficiency. 237 The vehicle can tow in D (Drive). Shift the transmission to a lower gear if the transmission shifts too often under heavy loads and/or hilly conditions. When towing at higher altitudes, engine coolant will boil at a lower temperature than at lower altitudes. If the engine is turned off immediately after towing at high altitude on steep uphill grades, the vehicle could show signs similar to engine overheating. To avoid this, let the engine run, preferably on level ground, with the transmission in P (Park) for a few minutes before turning the engine off. If the overheat warning comes on, see Engine Overheating 0 262. Parking on Hills { Warning To prevent serious injury or death, always park your vehicle and trailer on a level surface when possible. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 238 Driving and Operating When parking your vehicle and your trailer on a hill: 3. Drive slowly until the trailer is clear of the chocks. 1. Press the brake pedal, but do not shift into P (Park) yet. Turn the wheels into the curb if facing downhill or into traffic if facing uphill. 4. Stop and have someone pick up and store the chocks. 2. Have someone place chocks under the trailer wheels. 3. When the wheel chocks are in place, gradually release the brake pedal to allow the chocks to absorb the load of the trailer. Maintenance When Trailer Towing The vehicle needs service more often when used to tow trailers. See Maintenance Schedule 0 328. It is especially important to check the engine oil, axle lubricant, belts, cooling system, and brake system before and during each trip. 4. Reapply the brake pedal. Then apply the parking brake and shift into P (Park). Check periodically that all nuts and bolts on the trailer hitch are tight. 5. Release the brake pedal. Engine Cooling When Trailer Towing Leaving After Parking on a Hill 1. Apply and hold the brake pedal. . Start the engine. . Shift into a gear. . Release the parking brake. 2. Let up on the brake pedal. The cooling system may temporarily overheat during severe operating conditions. See Engine Overheating 0 262. Trailer Towing Caution Towing a trailer improperly can damage the vehicle and result in costly repairs not covered by the vehicle warranty. To tow a trailer correctly, follow the directions in this section and see your dealer for important information about towing a trailer with the vehicle. Trailer Weight { Warning Never exceed the towing capacity for your vehicle. Safe trailering requires monitoring the weight, speed, altitude, road grades, outside temperature, dimensions of the front of the trailer, and how frequently the vehicle is used to tow a trailer. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Trailer Weight Ratings When towing a trailer, the weight of the loaded vehicle and trailer must be within the weight ratings for the vehicle. . GCWR: Gross Combined Weight Rating . GVWR: Gross Vehicle Weight Rating . Maximum Trailer Weight Rating . Maximum Trailer Tongue Weight The only way to be sure the weight is not exceeding any of these ratings is to weigh the tow vehicle and trailer combination, fully loaded for the trip, getting individual weights for each of these items. { Warning You and others could be seriously injured or killed if the trailer is too heavy or the trailer brakes are inadequate for the load. The (Continued) Warning (Continued) vehicle may be damaged, and the repairs would not be covered by the vehicle warranty. Only tow a trailer if all the steps in this section have been followed. Ask your dealer for advice and information about towing a trailer. Gross Combined Weight Rating (GCWR) GCWR is the total allowable weight of the completely loaded vehicle and trailer including any fuel, passengers, cargo, equipment, and accessories. Do not exceed the GCWR for your vehicle. The GCWR for the vehicle is on the Tow Rating Chart following. 239 Gross Vehicle Weight Rating (GVWR) For information about the vehicle's maximum load capacity, see Vehicle Load Limits 0 177. When calculating the GVWR with a trailer attached, the trailer tongue weight must be included as part of the weight the vehicle is carrying. Maximum Trailer Weight Rating The maximum trailer weight rating is calculated assuming the tow vehicle has a driver, a front seat passenger, and all required trailering equipment. Weight of additional optional equipment, passengers, and cargo in the tow vehicle must be subtracted from the trailer weight rating. Use the tow rating chart to determine how much the trailer can weigh, based on the vehicle model, powertrain and trailering options. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 240 Driving and Operating Vehicle Maximum Trailer Weight Front-Wheel Drive Front-Wheel Drive, V92 Trailer Towing Package All-Wheel Drive All-Wheel Drive, V92 Trailer Towing Package *GCWR 680 kg (1,500 lb) 3 050 kg (6,725 lb) 2 268 kg (5,000 lb) 4 650 kg (10,250 lb) 680 kg (1,500 lb) 3 200 kg (7,055 lb) 2 268 kg (5,000 lb) 4 750 kg (10,470 lb) *The Gross Combination Weight Rating (GCWR) is the total allowable weight of the completely loaded vehicle and trailer including any passengers, cargo, equipment, and conversions. The GCWR for the vehicle should not be exceeded. Maximum Trailer Tongue Weight Rating The Maximum Trailer Tongue Weight Rating is the allowable trailer tongue weight that the vehicle can support. Do not exceed a maximum trailer tongue weight of 500 lbs. The trailer tongue weight contributes to the Gross Vehicle Weight (GVW). GVW includes the CURB WEIGHT of your vehicle, any passengers, cargo, equipment and the trailer tongue weight. Vehicle options, passengers, cargo, and equipment reduce the maximum allowable tongue weight the vehicle can carry, which also reduces the maximum allowable trailer weight. Trailer Load Balance The correct trailer load balance must be maintained to ensure trailer stability. Incorrect load balance is a leading cause of trailer sway. The trailer tongue weight (1) should be 10–15% of the loaded trailer weight (2). Some specific trailer types, such as boat trailers, fall Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating outside of this range. Always refer to the trailer owner’s manual for the recommended trailer tongue weight for each trailer. Never exceed the maximum loads for your vehicle, hitch and trailer. After loading the trailer, separately weigh the trailer and then the tongue to see if the weights are proper. If the trailer tongue weight is too high or too low, adjustments might be made by moving some items around in the trailer. If a cargo carrier is used in the trailer hitch receiver, choose a carrier that positions the load as close to the vehicle as possible. Make sure the total weight, including the carrier, is no more than half of the maximum allowable tongue weight for the vehicle or 227 kg (500 lb), whichever is less. Towing Equipment Hitches Always use the correct hitch equipment for your vehicle. Crosswinds, large trucks going by, and rough roads can affect the trailer and the hitch. Never attach rental hitches or other bumper-type hitches. Only use frame-mounted hitches that do not attach to the bumper. Hitch Cover 241 1. Remove the two fasteners on the lower tabs. 2. Pull the lower edge of the cover to about a 45 degree angle. 3. Pull the cover downward to disengage the upper attachments. To reinstall hitch cover: 1. Hold cover at a 45 degree angle to the vehicle and push the upper tabs into the slots in the bumper. 2. Push the bottom of the cover forward until the lower tabs line up with the lower slots. 3. Snap the hitch cover into place by pushing the upper corners forward. 4. Reinstall the two fasteners on the lower tabs. Ask your dealer for trailering information or assistance. To remove hitch cover, if equipped: Consider using mechanical sway controls with any trailer. Ask a trailering professional about sway controls or refer to the trailer manufacturer's recommendations and instructions. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 242 Driving and Operating Weight-Distributing Hitch Adjustment Tires Trailer Brakes . Do not tow a trailer while using a compact spare tire on the vehicle. . Tires must be properly inflated to support loads while towing a trailer. See Tires 0 281 for instructions on proper tire inflation. Loaded trailers over 450 kg (1,000 lb) must be equipped with brake systems and with brakes for each axle. Trailer braking equipment conforming to Canadian Standards Association (CSA) requirement CAN3-D313, or its equivalent, is recommended. A weight-distributing hitch may be useful with some trailers. Safety Chains 1. Front of Vehicle 2. Body to Ground Distance When using a weight-distributing hitch, measure the front fender height above the front axle distance (2) before and after connecting the trailer. Adjust the spring bars until the front fender height distance (2) is approximately half way between the first and second measurements. Always attach chains between the vehicle and the trailer, and attach the chains to the holes on the trailer hitch platform. Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the hitch. Always leave just enough slack so the combination can turn. Never allow safety chains to drag on the ground. State or local regulations may require trailers to have their own braking system if the loaded weight of the trailer exceeds certain minimums that can vary from state to state. Read and follow the instructions for the trailer brakes so they are installed, adjusted, and maintained properly. Never attempt to tap into your vehicle's hydraulic brake system. If you do, both the vehicle anti-lock brakes and the trailer brakes may not function, which could result in a crash. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating Trailer Wiring The trailer wiring harness (if equipped), with a 7-pin connector is located at the rear of the vehicle, and it is tied to the vehicle's frame. If the vehicle is not equipped with a 7-pin trailer connector, the body harness has provisions to connect a trailer harness and a 7-pin trailer connector which is available through your dealer. Use only a round, seven-wire connector with flat blade terminals meeting SAE J2863 specifications for proper electrical connectivity. The seven-wire harness contains the following trailer circuits: Stop/Turn 1 Yellow/Blue Signal Left Tail/Parking Lamps Gray/Brown 3 Reverse Lamps White/ Green 4 Battery Feed Red/Green 5 Stop/Turn Signal Green/ Right Brown 6 Electric Trailer Brake* Blue 7 Ground Black 2 * Circuit powered by electric trailer brake control wiring provisions. Electric Trailer Brake Control Wiring Provisions Wiring provisions for an aftermarket electric trailer brake controller are included with the vehicle as part of the trailer wiring package. The harness contains the following circuits: 243 Electric Trailer Brakes Blue Battery Feed Red/Green or Red/Blue Brake Apply Signal White/Blue Ground Black Refer to the aftermarket electric trailer brake controller owner's manual to determine wire color coding of the electric trailer brake controller. The wire colors on the brake controller may be different from the vehicle. The electric trailer brake controller should be installed by your dealer or a qualified service center. If equipped, there are four blunt cut wires inside the front driver side instrument panel. It will be necessary to have a technician connect the 12-volt power to the engine compartment fuse block. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 244 Driving and Operating Trailer Lamps Always check all trailer lamps are working at the beginning of each trip, and periodically on longer trips. Turn Signals When Towing a Trailer When properly connected, the trailer turn signals will illuminate to indicate the vehicle is turning, changing lanes, or stopping. When towing a trailer, the arrows on the instrument cluster will illuminate even if the trailer is not properly connected or the bulbs are burned out. Tow/Haul Mode For instructions on how to enter Tow/Haul mode, see Driver Mode Control 0 202. Tow/Haul assists when pulling a heavy trailer or a large or heavy load. See Tow/Haul Mode 0 196. Tow/Haul Mode is designed to be most effective when the vehicle and trailer combined weight is at least 75% of the vehicle's Gross Combined Weight Rating (GCWR). See “Weight of the Trailer” under Trailer Towing 0 238. Tow/Haul Mode is most useful when pulling a heavy trailer or a large or heavy load: . through rolling terrain . in stop-and-go traffic . in busy parking lots Operating the vehicle in Tow/Haul Mode when lightly loaded or not towing will not cause damage; however, it is not recommended and may result in unpleasant engine and transmission driving characteristics and reduced fuel economy. Trailer Sway Control (TSC) Vehicles with StabiliTrak/Electronic Stability Control (ESC) have a Trailer Sway Control (TSC) feature. Trailer sway is unintended side-to-side motion of a trailer while towing. If the vehicle is towing a trailer and the TSC detects that sway is increasing, the vehicle brakes are selectively applied at each wheel, to help reduce excessive trailer sway. If equipped with the Integrated Trailer Brake Control (ITBC) system, and the trailer has an electric brake system, StabiliTrak/ESC may also apply the trailer brakes. If TSC is enabled, the Traction Control System (TCS)/StabiliTrak/ ESC warning light will flash on the instrument cluster. Reduce vehicle speed by gradually removing your foot from the accelerator. If trailer sway continues, StabiliTrak/ESC can reduce engine torque to help slow the vehicle. TSC will not function if StabiliTrak/ESC is turned off. See Traction Control/Electronic Stability Control 0 200. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Driving and Operating { Warning Trailer sway can result in a crash and in serious injury or death, even if the vehicle is equipped with TSC. If the trailer begins to sway, reduce vehicle speed by gradually removing your foot from the accelerator. Then pull over to check the trailer and vehicle to help correct possible causes, including an improperly or overloaded trailer, unrestrained cargo, improper trailer hitch configuration, or improperly inflated or incorrect vehicle or trailer tires. See Towing Equipment 0 241 for trailer ratings and hitch setup recommendations. Trailer Tires Special Trailer (ST) tires differ from vehicle tires. Trailer tires are designed with stiff sidewalls to help prevent sway and to support heavy loads. These features can make it difficult to determine if the trailer tire pressures are low only based on a visual inspection. Always check all trailer tire pressures before each trip when the tires are cool. Low trailer tire pressure is a leading cause of trailer tire blow-outs. Trailer tires deteriorate over time. The trailer tire sidewall will show the week and year the tire was manufactured. Many trailer tire manufacturers recommend replacing tires more than six years old. 245 Overloading is another leading cause of trailer tire blow-outs. Never load your trailer with more weight than the tires are designed to support. The load rating is located on the trailer tire sidewall. Always know the maximum speed rating for the trailer tires before driving. This may be significantly lower than the vehicle tire speed rating. The speed rating may be on the trailer tire sidewall. If the speed rating is not shown, the default trailer tire speed rating is 105 km/h (65 mph). Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 246 Driving and Operating Conversions and Add-Ons Add-On Electrical Equipment { Warning The Data Link Connector (DLC) is used for vehicle service and Emission Inspection/ Maintenance testing. See Malfunction Indicator Lamp (Check Engine Light) 0 122. A device connected to the DLC — such as an aftermarket fleet or driver-behavior tracking device — may interfere with vehicle systems. This could affect vehicle operation and cause a crash. Such devices may also access information stored in the vehicle’s systems. Caution Some electrical equipment can damage the vehicle or cause components to not work and would not be covered by the vehicle warranty. Always check with your dealer before adding electrical equipment. Add-on equipment can drain the vehicle's 12-volt battery, even if the vehicle is not operating. The vehicle has an airbag system. Before attempting to add anything electrical to the vehicle, see Servicing the Airbag-Equipped Vehicle 0 72 and Adding Equipment to the Airbag-Equipped Vehicle 0 72. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Vehicle Care General Information General Information . . . . . . . . . . California Proposition 65 Warning . . . . . . . . . . . . . . . . . California Perchlorate Materials Requirements . . . . . Accessories and Modifications . . . . . . . . . . . . . . . . 248 248 249 249 Vehicle Checks Doing Your Own Service Work . . . . . . . . . . . . . . . 249 Hood . . . . . . . . . . . . . . . . . . . . . . . . . 250 Engine Compartment Overview . . . . . . . . . . . . . . . . . . . . 252 Engine Oil . . . . . . . . . . . . . . . . . . . . 253 Engine Oil Life System . . . . . . . 255 Automatic Transmission Fluid . . . . . . . . . . . . . . . . . . . . . . . . 256 Engine Air Filter Life System . . . . . . . . . . . . . . . . . . . . . . 257 Engine Air Cleaner/Filter . . . . . . 257 Cooling System . . . . . . . . . . . . . . 258 Engine Overheating . . . . . . . . . . 262 Washer Fluid . . . . . . . . . . . . . . . . . 263 Brakes . . . . . . . . . . . . . . . . . . . . . . . 264 Brake Fluid . . . . . . . . . . . . . . . . . . . 265 Battery - North America . . . . . . 266 All-Wheel Drive . . . . . . . . . . . . . . . 267 Starter Switch Check . . . . . . . . . 267 Park Brake and P (Park) Mechanism Check . . . . . . . . . . 267 Wiper Blade Replacement . . . . 268 Windshield Replacement . . . . . 269 Gas Strut(s) . . . . . . . . . . . . . . . . . . 269 Headlamp Aiming Headlamp Aiming . . . . . . . . . . . . 271 Bulb Replacement Bulb Replacement . . . . . . . . . . . . 271 LED Lighting . . . . . . . . . . . . . . . . . 271 License Plate Lamp . . . . . . . . . . 271 Electrical System High Voltage Devices and Wiring . . . . . . . . . . . . . . . . . . . . . . . Electrical System Overload . . . Fuses and Circuit Breakers . . . Engine Compartment Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . Instrument Panel Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . Rear Compartment Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . 272 272 273 273 277 278 Wheels and Tires Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 281 All-Season Tires . . . . . . . . . . . . . . 282 247 Winter Tires . . . . . . . . . . . . . . . . . . 282 Tire Sidewall Labeling . . . . . . . . 283 Tire Designations . . . . . . . . . . . . . 285 Tire Terminology and Definitions . . . . . . . . . . . . . . . . . . 285 Tire Pressure . . . . . . . . . . . . . . . . . 288 Tire Pressure for High-Speed Operation . . . . . . . . . . . . . . . . . . . 289 Tire Pressure Monitor System . . . . . . . . . . . . . . . . . . . . . . 290 Tire Pressure Monitor Operation . . . . . . . . . . . . . . . . . . . 291 Tire Inspection . . . . . . . . . . . . . . . . 295 Tire Rotation . . . . . . . . . . . . . . . . . 295 When It Is Time for New Tires . . . . . . . . . . . . . . . . . . . . . . . . 296 Buying New Tires . . . . . . . . . . . . . 297 Different Size Tires and Wheels . . . . . . . . . . . . . . . . . . . . . . 298 Uniform Tire Quality Grading . . . . . . . . . . . . . . . . . . . . . 299 Wheel Alignment and Tire Balance . . . . . . . . . . . . . . . . . . . . . 300 Wheel Replacement . . . . . . . . . . 301 Tire Chains . . . . . . . . . . . . . . . . . . . 301 If a Tire Goes Flat . . . . . . . . . . . . 302 Tire Changing . . . . . . . . . . . . . . . . 304 Compact Spare Tire . . . . . . . . . . 309 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 248 Vehicle Care Jump Starting Jump Starting - North America . . . . . . . . . . . . . . . . . . . . . 311 Towing the Vehicle Towing the Vehicle . . . . . . . . . . . 313 Recreational Vehicle Towing . . . . . . . . . . . . . . . . . . . . . . 314 Appearance Care Exterior Care . . . . . . . . . . . . . . . . . 317 Interior Care . . . . . . . . . . . . . . . . . . 321 Floor Mats . . . . . . . . . . . . . . . . . . . . 324 General Information For service and parts needs, visit your dealer. You will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks: California Proposition 65 Warning { Warning Most motor vehicles, including this one, as well as many of its service parts and fluids, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals. For more information go to www.P65Warnings.ca.gov/ passenger-vehicle. See Battery - North America 0 266 and Jump Starting - North America 0 311 and the back cover. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care California Perchlorate Materials Requirements Certain types of automotive applications, such as airbag initiators, seat belt pretensioners, and lithium batteries contained in electronic keys, may contain perchlorate materials. Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate. Accessories and Modifications Adding non-dealer accessories or making modifications to the vehicle can affect vehicle performance and safety, including such things as airbags, braking, stability, ride and handling, emissions systems, aerodynamics, durability, and electronic systems like antilock brakes, traction control, and stability control. These accessories or modifications could even cause malfunction or damage not covered by the vehicle warranty. Damage to suspension components caused by modifying vehicle height outside of factory settings will not be covered by the vehicle warranty. Damage to vehicle components resulting from modifications or the installation or use of non-GM certified parts, including control module or software modifications, is not covered under the terms of the vehicle warranty and may affect remaining warranty coverage for affected parts. GM Accessories are designed to complement and function with other systems on the vehicle. See your dealer to accessorize the vehicle using genuine GM Accessories installed by a dealer technician. Also, see Adding Equipment to the Airbag-Equipped Vehicle 0 72. 249 Vehicle Checks Doing Your Own Service Work { Warning It can be dangerous to work on your vehicle if you do not have the proper knowledge, service manual, tools, or parts. Always follow owner’s manual procedures and consult the service manual for your vehicle before doing any service work. If doing some of your own service work, use the proper service manual. It tells you much more about how to service the vehicle than this manual can. To order the proper service manual, see Publication Ordering Information 0 353. This vehicle has an airbag system. Before attempting to do your own service work, see Servicing the Airbag-Equipped Vehicle 0 72. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 250 Vehicle Care If equipped with remote vehicle start, open the hood before performing any service work to prevent remote starting the vehicle accidentally. See Remote Vehicle Start 0 15. Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Records 0 339. Hood To open the hood: { Warning For vehicles with auto engine stop/start, turn the vehicle off before opening the hood. If the vehicle is on, the engine will start when the hood is opened. You or others could be injured. 1. Pull the hood release lever with the i symbol. It is on the lower left side of the instrument panel. Caution Even small amounts of contamination can cause damage to vehicle systems. Do not allow contaminants to contact the fluids, reservoir caps, or dipsticks. { Warning Components under the hood can get hot from running the engine. To help avoid the risk of burning unprotected skin, never touch these components until they have cooled, and always use a glove or towel to avoid direct skin contact. Clear any snow from the hood before opening. 2. Go to the front of the vehicle and locate the secondary release lever under the front center of the hood. Push the secondary hood release lever to the right to release. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care 3. After you have partially lifted the hood, the gas strut system will automatically lift the hood and hold it in the fully open position. To close the hood: 1. Before closing the hood, be sure all filler caps are on properly, and all tools are removed. 2. Pull the hood down until the strut system is no longer holding up the hood. 3. Allow the hood to fall. Check to make sure the hood is latched completely. Repeat this process with additional force if necessary. { Warning Do not drive the vehicle if the hood is not latched completely. The hood could open fully, block your vision, and cause a crash. You or others could be injured. Always close the hood completely before driving. 251 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 252 Vehicle Care Engine Compartment Overview Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care 253 1. Engine Air Cleaner/Filter 0 257. Engine Oil Checking Engine Oil 2. Engine Oil Fill Cap. See Engine Oil 0 253. To ensure proper engine performance and long life, careful attention must be paid to engine oil. Following these simple, but important steps will help protect your investment: . Use engine oil approved to the proper specification and of the proper viscosity grade. See “Selecting the Right Engine Oil” in this section. . Check the engine oil level regularly and maintain the proper oil level. See “Checking Engine Oil” and “When to Add Engine Oil” in this section. . Change the engine oil at the appropriate time. See Engine Oil Life System 0 255. . Always dispose of engine oil properly. See “What to Do with Used Oil” in this section. Check the engine oil level regularly, every 650 km (400 mi), especially prior to a long trip. The engine oil dipstick handle is a loop. See Engine Compartment Overview 0 252 for the location. 3. Engine Oil Dipstick. See Engine Oil 0 253. 4. Engine Cooling Fan (Out of View). See Cooling System 0 258. 5. Brake Fluid Reservoir. See Brake Fluid 0 265. 6. Battery - North America 0 266. 7. Engine Coolant Surge Tank and Pressure Cap. See Cooling System 0 258. 8. Positive (+) Battery Terminal. See Jump Starting - North America 0 311. 9. Windshield Washer Fluid Reservoir. See Washer Fluid 0 263. 10. Engine Compartment Fuse Block 0 273. 11. Remote Negative (-) Battery Terminal. See Jump Starting North America 0 311. { Warning The engine oil dipstick handle may be hot; it could burn you. Use a towel or glove to touch the dipstick handle. If a low oil Driver Information Center (DIC) message displays, check the oil level. Follow these guidelines: . To get an accurate reading, park the vehicle on level ground. Check the engine oil level after the engine has been off for at least two hours. Checking the engine oil level on steep grades or too soon after engine shutoff can result in incorrect readings. Accuracy improves when Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 254 Vehicle Care checking a cold engine prior to starting. Remove the dipstick and check the level. . If unable to wait two hours, the engine must be off for at least 15 minutes if the engine is warm, or at least 30 minutes if the engine is not warm. Pull out the dipstick, wipe it with a clean paper towel or cloth, then push it back in all the way. Remove it again, keeping the tip down, and check the level. When to Add Engine Oil If the oil is below the cross-hatched area at the tip of the dipstick and the engine has been off for at least 15 minutes, add 1 L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right Engine Oil” later in this section for an explanation of what kind of oil to use. For engine oil crankcase capacity, see Capacities and Specifications 0 341. Caution Do not add too much oil. Oil levels above or below the acceptable operating range shown on the dipstick are harmful to the engine. If the oil level is above the operating range (i.e., the engine has so much oil that the oil level gets above the cross-hatched area that shows the proper operating range), the engine could be damaged. Drain the excess oil or limit driving of the vehicle, and seek a service professional to remove the excess oil. See Engine Compartment Overview 0 252 for the location of the engine oil fill cap. Add enough oil to put the level somewhere in the proper operating range. Push the dipstick all the way back in when through. Selecting the Right Engine Oil Selecting the right engine oil depends on both the proper oil specification and viscosity grade. See Recommended Fluids and Lubricants 0 337. Specification Ask for and use full synthetic engine oils that meet the dexos1 specification. Engine oils that have been approved by GM as meeting the dexos1 specification are marked with the dexos1 approved logo. See www.gmdexos.com. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Caution Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty. Viscosity Grade Use SAE 5W-30 viscosity grade engine oil. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below −29 °C (−20 °F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, it is recommended to select an oil of the correct specification. See “Specification” earlier in this section. Engine Oil Additives/Engine Oil Flushes Do not add anything to the oil. The recommended oils meeting the dexos1 specification are all that is needed for good performance and engine protection. Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty. What to Do with Used Oil Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner. Wash or properly dispose of clothing or rags containing used engine oil. See the manufacturer's warnings about the use and disposal of oil products. Used oil can be a threat to the environment. If you change your own oil, be sure to drain all the oil from the filter before disposal. Never 255 dispose of oil by putting it in the trash or pouring it on the ground, into sewers, or into streams or bodies of water. Recycle it by taking it to a place that collects used oil. Engine Oil Life System When to Change Engine Oil This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, engine temperature, and miles driven. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed. When the system has calculated that oil life has been diminished, it indicates that an oil change is necessary. A CHANGE ENGINE OIL SOON message comes on. Change the oil as soon as possible within the next 1 000 km (600 mi). It is possible that, if driving under Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 256 Vehicle Care the best conditions, the oil life system might indicate that an oil change is not necessary for up to a year. The engine oil and filter must be changed at least once a year and, at this time, the system must be reset. Your dealer has trained service people who will perform this work and reset the system. It is also important to check the oil regularly over the course of an oil drain interval and keep it at the proper level. If the system is ever reset accidentally, the oil must be changed at 5 000 km (3,000 mi) since the last oil change. Remember to reset the oil life system whenever the oil is changed. How to Reset the Engine Oil Life System Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system: 1. Display the REMAINING OIL LIFE on the DIC. See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. 2. Press and hold V on the DIC while the Oil Life display is active. The oil life will change to 100%. If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure. Automatic Transmission Fluid It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to the dealer and have it repaired as soon as possible. Change the fluid at the intervals listed in Maintenance Schedule 0 328, and be sure to use the transmission fluid listed in Recommended Fluids and Lubricants 0 337. Caution Use of the incorrect automatic transmission fluid may damage the vehicle, and the damage may not be covered by the vehicle warranty. Always use the correct automatic transmission fluid. See Recommended Fluids and Lubricants 0 337. The transmission fluid will not reach the end of the dipstick unless the transmission is at operating temperature. If you need to check the transmission fluid level, take the vehicle to your dealer. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Engine Air Filter Life System How to Reset Engine Air Filter Life System If equipped, this feature provides the engine air filter's remaining life and best timing for a change. The timing to change an engine air filter depends on driving and environmental conditions. Reset the system whenever the engine air filter is replaced so that the system can calculate the next engine air filter change. When to Change Engine Air Filter When the Driver Information Center (DIC) displays a message to replace the engine air filter at the next oil change, follow this timing. When the DIC displays a message to replace the engine air filter soon, replace the engine air filter at the earliest convenience. The system must be reset after the engine air filter is changed. If the DIC displays a message to check the engine air filter system, see your dealer. To reset: 1. Place the vehicle in P (Park). 2. Select Engine Air Filter Life on the DIC menu. See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. 3. Press > to move to the Reset/ Disable display area. Select Reset then press V. Press V to confirm reset. 257 Engine Air Cleaner/Filter The engine air cleaner/filter is in the engine compartment on the passenger side of the vehicle. See Engine Compartment Overview 0 252. When to Inspect the Engine Air Cleaner/Filter . For intervals on changing and inspecting the engine air filter, see Maintenance Schedule 0 328. . If equipped with Engine Air Filter Life System, see Engine Air Filter Life System 0 257. . If driving in very dusty areas, follow the engine air filter inspecting and changing intervals, see Maintenance Schedule 0 328. How to Inspect the Engine Air Cleaner/Filter Do not start the engine or have the engine running with the engine air cleaner/filter housing open. Before removing the engine air cleaner/ Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 258 Vehicle Care filter, make sure that the engine air cleaner/filter housing and nearby components are free of dirt and debris. Remove the engine air cleaner/filter. Lightly tap and shake the engine air cleaner/filter (away from the vehicle), to release loose dust and dirt. Inspect the engine air cleaner/filter for damage, and replace if damaged. Do not clean the engine air cleaner/filter or components with water or compressed air. To inspect or replace the air cleaner/ filter: 1. Remove the five screws and lift the cover off the air cleaner/ filter housing. 2. Inspect or replace the engine air cleaner/filter. 3. Lower the cover on the air cleaner/filter housing and secure with the five screws. 4. Reset the Engine Air Filter Life System, if equipped. { Warning Caution If the air cleaner/filter is off, dirt can easily get into the engine, which could damage it. Always have the air cleaner/filter in place when driving. Cooling System The cooling system allows the engine to maintain the correct working temperature. Operating the engine with the air cleaner/filter off can cause you or others to be burned. Use caution when working on the engine. Do not start the engine or drive the vehicle with the air cleaner/filter off, as flames may be present if the engine backfires. 1. Engine Cooling Fan (Out of View) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care 2. Engine Coolant Surge Tank and Pressure Cap { Warning An underhood electric fan can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan. { Warning Do not touch heater or radiator hoses, or other engine parts. They can be very hot and can burn you. Do not run the engine if there is a leak; all coolant could leak out. That could cause an engine fire and can burn you. Fix any leak before driving the vehicle. Engine Coolant The cooling system in the vehicle is filled with DEX-COOL engine coolant. This coolant needs to be checked and replaced at appropriate intervals. See Maintenance Schedule 0 328. The following explains the cooling system and how to check and add coolant when it is low. If there is a problem with engine overheating, see Engine Overheating 0 262. What to Use { Warning Plain water, or other liquids such as alcohol, can boil before the proper coolant mixture will. With plain water or the wrong mixture, the engine could get too hot but there would not be an overheat warning. The engine could catch fire and you or others could be burned. 259 Use a 50/50 mixture of clean, drinkable water and DEX-COOL coolant. If using this mixture, nothing else needs to be added. This mixture: . Gives freezing protection down to −37 °C (−34 °F), outside temperature. . Gives boiling protection up to 129 °C (265 °F), engine temperature . Protects against rust and corrosion. . Will not damage aluminum parts. . Helps keep the proper engine temperature. Caution Do not use anything other than a mix of DEX-COOL coolant that meets GM Standard GMW3420 and clean, drinkable water. Anything else can cause damage to the engine cooling (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 260 Vehicle Care The coolant surge tank is located in the engine compartment on the driver side of the vehicle. See Engine Compartment Overview 0 252. Caution (Continued) system and the vehicle, which would not be covered by the vehicle warranty. Never dispose of engine coolant by putting it in the trash, pouring it on the ground, or into sewers, streams, or bodies of water. Have the coolant changed by an authorized service center, familiar with legal requirements regarding used coolant disposal. This will help protect the environment and your health. Checking Coolant The vehicle must be on a level surface when checking the coolant level. How to Add Coolant to the Coolant Surge Tank { Warning Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level mark is not visible, add a 50/50 mixture of clean, drinkable water and DEX-COOL coolant at the coolant surge tank to the top rib on the middle of the tank, but be sure the cooling system is cool before this is done. See Engine Overheating 0 262. Steam and scalding liquids from a hot cooling system are under pressure. Turning the pressure cap, even a little, can cause them to come out at high speed and you could be burned. Never turn the cap when the cooling system, including the pressure cap, is hot. Wait for the cooling system and pressure cap to cool. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care { Warning Plain water, or other liquids such as alcohol, can boil before the proper coolant mixture will. With plain water or the wrong mixture, the engine could get too hot but there would not be an overheat warning. The engine could catch fire and you or others could be burned. { Warning Spilling coolant on hot engine parts can burn you. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Caution Failure to follow the specific coolant fill procedure could cause the engine to overheat and could cause system damage. If coolant is not visible in the surge tank, contact your dealer. If no problem is found, check to see if coolant is visible in the coolant surge tank. If coolant is visible but the coolant level is not at the indicated level mark, add a 50/ 50 mixture of clean, drinkable water and DEX-COOL coolant at the coolant surge tank, but be sure the cooling system, including the coolant surge tank pressure cap, is cool before you do it. 261 1. Remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise about one-quarter of a turn. If you hear a hiss, wait for that to stop. This will allow any pressure still left to be vented out the discharge hose. 2. Keep turning the pressure cap slowly and remove it. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 262 Vehicle Care 3. Fill the coolant surge tank with the proper mixture to the indicated level mark. 4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan. By this time, the coolant level inside the coolant surge tank may be lower. If the level is lower, add more of the proper mixture to the coolant surge tank until the level reaches the indicated level mark. 5. Replace the pressure cap tightly. 6. Verify coolant level after the engine is shut off and the coolant is cold. If necessary, repeat coolant fill procedure Steps 1–6. If the coolant still is not at the proper level when the system cools down again, see your dealer. Caution If the pressure cap is not tightly installed, coolant loss and engine damage may occur. Be sure the cap is properly and tightly secured. Engine Overheating The vehicle has several indicators to warn of the engine overheating. There is an engine coolant temperature gauge on the instrument cluster. See Engine Coolant Temperature Gauge 0 118. The vehicle may also display a message on the Driver Information Center (DIC). If the decision is made not to lift the hood when this warning appears, get service help right away. See Roadside Assistance Program 0 348. If the decision is made to lift the hood, make sure the vehicle is parked on a level surface. Then check to see if the engine cooling fan is running. If the engine is overheating, the fan should be running. If it is not, do not continue to run the engine. Have the vehicle serviced. Caution Do not run the engine if there is a leak in the engine cooling system. This can cause a loss of all coolant and can damage the system and vehicle. Have any leaks fixed right away. If Steam Is Coming from the Engine Compartment { Warning Steam and scalding liquids from a hot cooling system are under pressure. Turning the pressure cap, even a little, can cause them to come out at high speed and you could be burned. Never turn the cap when the cooling system, (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Warning (Continued) including the pressure cap, is hot. Wait for the cooling system and pressure cap to cool. If No Steam Is Coming from the Engine Compartment If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: . Climbs a long hill on a hot day. . Stops after high-speed driving. . Idles for long periods in traffic. If the overheat warning is displayed with no sign of steam: 1. Turn the air conditioning off. 2. Turn the heater on to the highest temperature and to the highest fan speed. Open the windows as necessary. 3. When it is safe to do so, pull off the road, shift to P (Park) or N (Neutral), and let the engine idle. If the engine coolant temperature gauge is no longer in the overheated area, the vehicle can be driven. Continue to drive the vehicle slowly for about 10 minutes. Keep a safe distance from the vehicle in front. If the warning does not come back on, continue to drive normally and have the cooling system checked for proper fill and function. 263 Washer Fluid What to Use When windshield washer fluid is needed, be sure to read the manufacturer's instructions before use. If operating the vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing. Adding Washer Fluid If the warning continues, pull over, stop, and park the vehicle right away. If there is no sign of steam, idle the engine for three minutes while parked. If the warning is still displayed, turn off the engine until it cools down. Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview 0 252 for reservoir location. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 264 Vehicle Care Caution . Do not use washer fluid that contains any type of water repellent coating. This can cause the wiper blades to chatter or skip. . Do not use engine coolant (antifreeze) in the windshield washer. It can damage the windshield washer system and paint. . . . Do not mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage the washer fluid tank and other parts of the washer system. When using concentrated washer fluid, follow the manufacturer instructions for adding water. Fill the washer fluid tank only three-quarters full when it is very cold. This allows (Continued) Caution (Continued) for fluid expansion if freezing occurs, which could damage the tank if it is completely full. Brakes Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound can come and go or can be heard all the time when the vehicle is moving, except when applying the brake pedal firmly. { Warning The brake wear warning sound means that soon the brakes will not work well. That could lead to a crash. When the brake wear warning sound is heard, have the vehicle serviced. Caution Continuing to drive with worn-out brake pads could result in costly brake repair. Some driving conditions or climates can cause a brake squeal when the brakes are first applied or lightly applied. This does not mean something is wrong with the brakes. Properly torqued wheel nuts are necessary to help prevent brake pulsation. When tires are rotated, inspect brake pads for wear and evenly tighten wheel nuts in the proper sequence to torque specifications. See Capacities and Specifications 0 341. Brake pads should be replaced as complete sets. Brake Pedal Travel See your dealer if the brake pedal does not return to normal height, or if there is a rapid increase in pedal travel. This could be a sign that brake service may be required. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Replacing Brake System Parts Checking Brake Fluid Always replace brake system parts with new, approved replacement parts. If this is not done, the brakes may not work properly. The braking performance expected can change in many other ways if the wrong replacement brake parts are installed or if parts are improperly installed. With the vehicle in P (Park) on a level surface, the brake fluid level should be between the minimum and maximum marks on the brake fluid reservoir. Brake Fluid The brake master cylinder reservoir is filled with GM approved DOT 3 brake fluid as indicated on the reservoir cap. See Engine Compartment Overview 0 252 for the location of the reservoir. There are only two reasons why the brake fluid level in the reservoir may go down: . Normal brake lining wear. When new linings are installed, the fluid level goes back up. . A fluid leak in the brake hydraulic system. Have the brake hydraulic system fixed. With a leak, the brakes will not work well. Always clean the brake fluid reservoir cap and the area around the cap before removing it. Do not top off the brake fluid. Adding fluid does not correct a leak. If fluid is added when the linings are worn, there will be too much fluid when new brake linings are 265 installed. Add or remove fluid, as necessary, only when work is done on the brake hydraulic system. { Warning If too much brake fluid is added, it can spill on the engine and burn, if the engine is hot enough. You or others could be burned, and the vehicle could be damaged. Add brake fluid only when work is done on the brake hydraulic system. When the brake fluid falls to a low level, the brake warning light comes on. See Brake System Warning Light 0 124. Brake fluid absorbs water over time which degrades the effectiveness of the brake fluid. Replace brake fluid at the specified intervals to prevent increased stopping distance. See Maintenance Schedule 0 328. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 266 Vehicle Care What to Add Battery - North America Use only GM approved DOT 3 brake fluid from a clean, sealed container. See Recommended Fluids and Lubricants 0 337. The original equipment battery is maintenance free. Do not remove the cap and do not add fluid. { Warning The wrong or contaminated brake fluid could result in damage to the brake system. This could result in the loss of braking leading to a possible injury. Always use the proper GM approved brake fluid. Caution If brake fluid is spilled on the vehicle's painted surfaces, the paint finish can be damaged. Immediately wash off any painted surface. Refer to the replacement number on the original battery label when a new battery is needed. For replacement of the battery, see your dealer. Stop/Start System The vehicle has a Stop/Start system to shut off the engine to help conserve fuel. See Stop/Start System 0 184. It has an Absorbed Glass Mat (AGM) 12-volt battery. Installation of a standard 12-volt battery will result in reduced 12-volt battery life. When using a 12-volt battery charger on the 12-volt AGM battery, some chargers have an AGM battery setting on the charger. If available, use the AGM setting on the charger, to limit charge voltage to 14.8 volts. { Warning WARNING: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. WASH HANDS AFTER HANDLING. For more information go to www.P65Warnings.ca.gov/ passenger-vehicle. See California Proposition 65 Warning 0 248 and the back cover. Vehicle Storage { Warning Batteries have acid that can burn you and gas that can explode. You can be badly hurt if you are (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Warning (Continued) not careful. See Jump Starting North America 0 311 for tips on working around a battery without getting hurt. Infrequent Usage: Remove the black, negative (−) cable from the battery to keep the battery from running down. Extended Storage: Remove the black, negative (−) cable from the battery or use a battery trickle charger. All-Wheel Drive Transfer Case Under normal driving conditions, transfer case fluid does not require maintenance unless there is a fluid leak or unusual noise. If required, have the transfer case serviced by your dealer. Starter Switch Check { Warning When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. 2. Apply both the parking brake and the regular brake. Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts. 3. Try to start the engine in each gear. The vehicle should start only in P (Park) or N (Neutral). If the vehicle starts in any other position, contact your dealer for service. 267 Park Brake and P (Park) Mechanism Check { Warning When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move. Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake. . To check the parking brake's holding ability: With the engine running and the transmission in N (Neutral), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 268 . Vehicle Care To check the P (Park) mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake. Contact your dealer if service is required. Wiper Blade Replacement Windshield wiper blades should be inspected for wear and cracking. See Maintenance Schedule 0 328. Replacement blades come in different types and are removed in different ways. For proper type and length, see Maintenance Replacement Parts 0 338. Caution Allowing the wiper arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by (Continued) Caution (Continued) the vehicle warranty. Do not allow the wiper arm to touch the windshield. Front Wiper Blade Replacement To replace the front wiper blades: 1. Pull the windshield wiper assembly away from the windshield. 2. Lift up on the latch in the middle of the wiper blade where the wiper arm attaches. 3. With the latch open, pull the wiper blade down toward the windshield far enough to release it from the J-hooked end of the wiper arm. 4. Remove the wiper blade. 5. Reverse Steps 1–3 for wiper blade replacement. Caution Damage may occur if the wiper blades are not in contact with the windshield before turning on the wiper system. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Rear Wiper Blade Replacement To replace the rear wiper blade: 5. Push the release lever (2) to disengage the hook and push the wiper arm (1) out of the blade assembly (3). 6. Push the new blade assembly securely on the wiper arm until the release lever clicks into place. 1. Slide a plastic tool under the cover and push upward to unsnap. 269 may display messages, or they may not work at all. See your dealer for proper windshield replacement. Acoustic Windshield 7. To reinstall the cover, ensure that the cover hook slides into the slot in the blade assembly. The vehicle is equipped with an acoustic windshield. If the windshield needs to be replaced, be sure to get an acoustic windshield so you will continue to have the benefits an acoustic windshield can provide. 8. Snap the cover down to secure. Gas Strut(s) 2. Slide the cover toward the wiper blade tip to unhook it from the blade assembly. Windshield Replacement 3. Remove the cover. Driver Assistance Systems 4. Lift the wiper arm away from the windshield. If the windshield needs to be replaced and the vehicle is equipped with a front camera sensor for the Driver Assistance Systems, a GM replacement windshield is recommended. The replacement windshield must be installed according to GM specifications for proper alignment. If it is not, these systems may not work properly, they This vehicle is equipped with gas strut(s) to provide assistance in lifting and holding open the hood/ trunk/liftgate system in full open position. { Warning If the gas struts that hold open the hood, trunk, and/or liftgate fail, you or others could be seriously injured. Take the vehicle to your dealer for service immediately. (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 270 Vehicle Care Warning (Continued) Visually inspect the gas struts for signs of wear, cracks, or other damage periodically. Check to make sure the hood/trunk/liftgate is held open with enough force. If struts are failing to hold the hood/trunk/liftgate, do not operate. Have the vehicle serviced. Hood Caution Do not apply tape or hang any objects from gas struts. Also do not push down or pull on gas struts. This may cause damage to the vehicle. See Maintenance Schedule 0 328. Trunk Liftgate Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Headlamp Aiming Bulb Replacement Headlamp aim has been preset and should need no further adjustment. For the proper type of replacement bulbs, or any bulb changing procedure not listed in this section, contact your dealer. If the vehicle is damaged in a crash, the headlamp aim may be affected. If adjustment to the headlamps is necessary, see your dealer. Caution Do not replace incandescent bulbs with aftermarket LED replacement bulbs. This can cause damage to the vehicle electrical system. Lamp Assembly LED Lighting This vehicle has several LED lamps. For replacement of any LED lighting assembly, contact your dealer. License Plate Lamp This section is for vehicles without a Rear Camera Mirror (RCM). Vehicles with a RCM have an LED license plate lamp. Bulb Assembly 271 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 272 Vehicle Care To replace one of these bulbs: 1. Push the left end of the lamp assembly toward the right. 2. Turn the lamp assembly down to remove it. 3. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 4. Pull the bulb (2) straight out of the bulb socket (1). 5. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly. 6. Turn the lamp assembly into the lamp assembly opening engaging the clip side first. 7. Push on the lamp side opposite the clip until the lamp assembly snaps into place. Electrical System High Voltage Devices and Wiring { Warning Exposure to high voltage can cause shock, burns, and even death. The high voltage components in the vehicle can only be serviced by technicians with special training. High voltage components are identified by labels. Do not remove, open, take apart, or modify these components. High voltage cable or wiring has orange covering or labels. Do not probe, tamper with, cut, or modify high voltage cable or wiring. Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. Replace a bad fuse with a new one of the identical size and rating. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Headlamp Wiring An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off. Windshield Wipers If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart. Although the circuit is protected from electrical overload, overload due to heavy snow or ice may cause wiper linkage damage. Always clear ice and heavy snow from the windshield before using the windshield wipers. If the overload is caused by an electrical problem and not snow or ice, be sure to get it fixed. Fuses and Circuit Breakers The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems. Fuses of the same amperage can be temporarily borrowed from another fuse location, if a fuse goes out. Replace the fuse as soon as possible. Engine Compartment Fuse Block { Danger Fuses and circuit breakers are marked with their ampere rating. Do not exceed the specified amperage rating when replacing fuses and circuit breakers. Use of an oversized fuse or circuit breaker can result in a vehicle fire. You and others could be seriously injured or killed. Caution To check a fuse, look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a new one of the identical size and rating. 273 Do not pull the engine compartment fuse block lever, since it is intended only for service purposes. If pulled, vehicle malfunction may occur. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 274 Vehicle Care To remove the fuse block cover, press the clips on the cover and lift it straight up. Caution Spilling liquid on any electrical component on the vehicle may damage it. Always keep the covers on any electrical component. To remove fuses, use the fuse puller and pull straight out. The vehicle may not be equipped with all of the fuses, relays, and features shown. Fuses F1 Usage Antilock brake system pump Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Fuses Usage Fuses Usage Fuses 275 Usage F2 Starter 1 F20 – F36 – F3 DC DC transformer 1 F21 – F37 F22 F4 – Electronic brake control module Right low-beam headlamp F38 F5 DC DC transformer 2 F23 Parking/Trailer lamps Automatic headlamp leveling motor F6 – F24 F39 F7 – Right trailer stoplamp/Turnlamp Transmission control module F8 – F25 F40 F9 Vacuum pump Steering column lock Left rear bus electrical center/ Ignition F10 Front wiper F41 Instrument cluster F11 – F42 F12 Heating, ventilation, and air conditioning F26 – F27 Left trailer stoplamp/Turnlamp – F28 – F13 Starter 2 F29 – F43 Head-up display F14 – F30 Washer pump F44 F15 Rear wiper F31 – F16 – F32 F17 – Left low-beam headlamp Communication gateway module/ Run/Crank F45 – F18 – F33 Front fog lamps F46 – F19 – F34 Horn F47 – F35 – F48 – Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 276 Vehicle Care Fuses Usage Fuses Usage Fuses Usage F49 Interior rearview mirror F61 O2 sensor 1/ Air flow F75 – F76 – F50 Fuel system control module F62 – F77 – F63 O2 sensor 2/ Canister/Engine oil/ Turbo F51 Heated steering wheel F52 Folding seats switch F53 Usage K1 Starter 1 K2 Run/Crank K3 Vacuum pump K4 – Engine control module powertrain 2 K5 Air conditioning K6 Coolant pump Engine control module Folding seats F64 Aeroshutter F65 Engine control module powertrain 1 – Relays F54 Coolant pump F55 Air conditioning clutch F56 Integrated chassis control module F67 F57 Engine control module/Ignition Engine control module – odd K7 F68 – K8 F58 Transmission control module/ Ignition F69 – K9 – F70 – K10 Starter 2 F71 – F59 Engine control module battery F72 – F60 Engine control module – even F73 – F74 – F66 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Instrument Panel Fuse Block The instrument panel fuse block is inside the center console on the passenger side of the vehicle. Remove the fuse access door by pulling the door at the opening. To remove a fuse, use the fuse puller in the engine compartment fuse block. The vehicle may not be equipped with all of the fuses, relays, and features shown. 277 Fuses Usage F1 Body control module 6 F2 Diagnostic link F3 Electric steering column lock F4 Rear USB port F5 – F6 Heating, ventilation, and air conditioning F7 Body control module 3 F8 – F9 Right front heated seat F10 Airbag F11 Electronic precision shift F12 Amplifier F13 Body control module 7 F14 Left front heated seat F15 – F16 Sunroof Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 278 Vehicle Care Fuses Usage Fuses Usage F17 Communication gateway module F33 Driver power seat F34 Passenger power seat F18 Instrument cluster F35 F19 Body control module 1 Feed/Body control module 4 F20 Wireless charger module F36 Electric power steering F21 Body control module 4 F37 F22 Infotainment Power outlet/Wireless charger/Accessory F23 Body control module 2 F38 Body control module 8 F24 – F39 F25 Park assist Steering wheel controls backlighting F26 Communications integration module F27 Video F40 – F28 Radio/Heating, ventilation, and air conditioning display F41 – F42 Auxiliary power outlet/Lighter F29 Radio F30 Steering wheel controls F31 Front blower F32 DC AC inverter Circuit Breakers Usage Rear Compartment Fuse Block The rear compartment fuse block is behind a trim panel on the driver side of the rear storage compartment. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care The trim panel is removed by prying along the top edge of the trim panel at two notched locations. Remove the trim panel to access the fuse block. To remove a fuse, use the fuse puller in the engine compartment fuse block. The fuse block label is on the back of the access door in the driver side rear trim panel. Fuses Usage Fuses Usage F1 – F3 Folding seats F2 Trailer F4 Rear blower 279 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 280 Vehicle Care Fuses Usage Fuses Usage F5 Rear drive control F23 – F6 – F24 Lumbar F7 Right window F25 – F8 Rear defogger F26 Trailer brake lamps F9 Left window F27 Massage F10 – F28 F11 Trailer reverse Passive entry/ Passive start F12 USB port/Third row seats Fuses Usage F40 Memory seat module F41 Automatic occupancy sensor F42 – F43 – F44 – Liftgate motor F29 – F45 F30 Canister vent F46 Rear heated seats – F13 – F31 – F47 F14 – F32 Heated mirrors F48 – USB port/Second row seats F49 – F50 – F15 – F16 – F17 Air quality sensor F34 Liftgate module F51 – F18 – F35 F52 F19 Ventilated seats/ Massage Fuel system control module F36 – Semi-active dampening system module F20 – F37 – F53 – F21 – F38 Window module F54 F22 – F39 Rear closure External object calculating remote system/Side blind zone alert F33 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Fuses Usage F55 – F56 Universal remote system/Overhead console F57 Hands free closure release Circuit Breakers Usage CB1 – CB2 – CB3 Rear auxiliary power outlet Relays Wheels and Tires Tires . Poorly maintained and improperly used tires are dangerous. . Overloading the tires can cause overheating as a result of too much flexing. There could be a blowout and a serious crash. See Vehicle Load Limits 0 177. Usage K1 – K2 – Warning (Continued) . Underinflated tires pose the same danger as overloaded tires. The resulting crash could cause serious injury. Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when the tires are cold. . Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact — such as when hitting a pothole. Keep tires at the recommended pressure. . Worn or old tires can cause a crash. If the tread is badly worn, replace them. Every new GM vehicle has high-quality tires made by a leading tire manufacturer. See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer. { Warning (Continued) 281 (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 282 Vehicle Care Warning (Continued) . Replace any tires that have been damaged by impacts with potholes, curbs, etc. . Improperly repaired tires can cause a crash. Only the dealer or an authorized tire service center should repair, replace, dismount, and mount the tires. . Do not spin the tires in excess of 56 km/h (35 mph) on slippery surfaces such as snow, mud, ice, etc. Excessive spinning may cause the tires to explode. See Tire Pressure for High-Speed Operation 0 289 for inflation pressure adjustment for high-speed driving. All-Season Tires Winter Tires This vehicle may come with all-season tires. These tires are designed to provide good overall performance on most road surfaces and weather conditions. Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. Original equipment all-season tires can be identified by the last two characters of this TPC code, which will be “MS.” This vehicle was not originally equipped with winter tires. Winter tires are designed for increased traction on snow and ice-covered roads. Consider installing winter tires on the vehicle if frequent driving on ice or snow covered roads is expected. See your dealer for details regarding winter tire availability and proper tire selection. Also, see Buying New Tires 0 297. Consider installing winter tires on the vehicle if frequent driving on snow or ice-covered roads is expected. All-season tires provide adequate performance for most winter driving conditions, but they may not offer the same level of traction or performance as winter tires on snow or ice-covered roads. See Winter Tires 0 282. With winter tires, there may be decreased dry road traction, increased road noise, and shorter tread life. After changing to winter tires, be alert for changes in vehicle handling and braking. If using winter tires: . Use tires of the same brand and tread type on all four wheel positions. . Use only radial ply tires of the same size, load range, and speed rating as the original equipment tires. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care code molded onto the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines. Winter tires with the same speed rating as the original equipment tires may not be available for H, V, W, Y, and ZR speed rated tires. If winter tires with a lower speed rating are chosen, never exceed the tire's maximum speed capability. Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples show a typical passenger vehicle tire and a compact spare tire sidewall. 283 Passenger (P-Metric) Tire Example (1) Tire Size : The tire size is a combination of letters and numbers used to define a particular tire's width, height, aspect ratio, construction type, and service description. See the “Tire Size” illustration later in this section. (2) TPC Spec (Tire Performance Criteria Specification) : Original equipment tires designed to GM's specific tire performance criteria have a TPC specification (3) DOT (Department of Transportation) : The Department of Transportation (DOT) code indicates that the tire is in compliance with the U.S. Department of Transportation Motor Vehicle Safety Standards. DOT Tire Date of Manufacture : The last four digits of the TIN indicate the tire manufactured date. The first two digits represent the week (01– 52) and the last two digits, the year. For example, the third week of the year 2010 would have a four-digit DOT date of 0310. (4) Tire Identification Number (TIN) : The letters and numbers following the DOT (Department of Transportation) code are the Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 284 Vehicle Care Tire Identification Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture. (5) Tire Ply Material : The type of cord and number of plies in the sidewall and under the tread. (6) Uniform Tire Quality Grading (UTQG) : Tire manufacturers are required to grade tires based on three performance factors: treadwear, traction, and temperature resistance. For more information see Uniform Tire Quality Grading 0 299. (7) Maximum Cold Inflation Load Limit : Maximum load that can be carried and the maximum pressure needed to support that load. Compact Spare Tire Example (1) Tire Ply Material : The type of cord and number of plies in the sidewall and under the tread. (2) Temporary Use Only : The compact spare tire or temporary use tire should not be driven at speeds over 80 km/h (50 mph). The compact spare tire is for emergency use when a regular road tire has lost air and gone flat. If the vehicle has a compact spare tire, see Compact Spare Tire 0 309 and If a Tire Goes Flat 0 302. (3) Tire Identification Number (TIN) : The letters and numbers following the DOT (Department of Transportation) code are the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture. (4) Maximum Cold Inflation Load Limit : Maximum load that can be carried and the maximum pressure needed to support that load. (5) Tire Inflation : The temporary use tire or compact spare tire should be inflated to 420 kPa (60 psi). For more information on tire pressure and inflation see Tire Pressure 0 288. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care (6) Tire Size : A combination of letters and numbers define a tire's width, height, aspect ratio, construction type, and service description. The letter “T” as the first character in the tire size means the tire is for temporary use only. (7) TPC Spec (Tire Performance Criteria Specification) : Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines. Tire Designations Tire Size The example shows a typical passenger vehicle tire size. (1) Passenger (P-Metric) Tire : The United States version of a metric tire sizing system. The letter “P” as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.S. Tire and Rim Association. (2) Tire Width : The three-digit number indicates the tire section width in millimeters from sidewall to sidewall. (3) Aspect Ratio : A two-digit number that indicates the tire height-to-width measurements. For example, if the tire size aspect ratio is 60, as shown in item (3) of the illustration, it would mean that the tire's sidewall is 60 percent as high as it is wide. 285 (4) Construction Code : A letter code is used to indicate the type of ply construction in the tire. The letter “R” means radial ply construction; the letter “D” means diagonal or bias ply construction. (5) Rim Diameter : Diameter of the wheel in inches. (6) Service Description : These characters represent the load index and speed rating of the tire. The load index represents the load carrying capacity a tire is certified to carry. The speed rating is the maximum speed a tire is certified to carry a load. Tire Terminology and Definitions Air Pressure : The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in kPa (kilopascal) or psi (pounds per square inch). Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 286 Vehicle Care Accessory Weight : The combined weight of optional accessories. Some examples of optional accessories are automatic transmission, power windows, power seats, and air conditioning. Cold Tire Pressure : The amount of air pressure in a tire, measured in kPa (kilopascal) or psi (pounds per square inch) before a tire has built up heat from driving. See Tire Pressure 0 288. Aspect Ratio : The relationship of a tire's height to its width. Curb Weight : The weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil, and coolant, but without passengers and cargo. Belt : A rubber coated layer of cords between the plies and the tread. Cords may be made from steel or other reinforcing materials. Bead : The tire bead contains steel wires wrapped by steel cords that hold the tire onto the rim. Bias Ply Tire : A pneumatic tire in which the plies are laid at alternate angles less than 90 degrees to the centerline of the tread. DOT Markings : A code molded into the sidewall of a tire signifying that the tire is in compliance with the U.S. Department of Transportation (DOT) Motor Vehicle Safety Standards. The DOT code includes the Tire Identification Number (TIN), an alphanumeric designator which can also identify the tire manufacturer, production plant, brand, and date of production. GVWR : Gross Vehicle Weight Rating. See Vehicle Load Limits 0 177. GAWR FRT : Gross Axle Weight Rating for the front axle. See Vehicle Load Limits 0 177. GAWR RR : Gross Axle Weight Rating for the rear axle. See Vehicle Load Limits 0 177. Intended Outboard Sidewall : The side of an asymmetrical tire that must always face outward when mounted on a vehicle. Kilopascal (kPa) : The metric unit for air pressure. Light Truck (LT-Metric) Tire : A tire used on light duty trucks and some multipurpose passenger vehicles. Load Index : An assigned number ranging from 1 to 279 that corresponds to the load carrying capacity of a tire. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Maximum Inflation Pressure : The maximum air pressure to which a cold tire can be inflated. The maximum air pressure is molded onto the sidewall. Maximum Load Rating : The load rating for a tire at the maximum permissible inflation pressure for that tire. Maximum Loaded Vehicle Weight : The sum of curb weight, accessory weight, vehicle capacity weight, and production options weight. Normal Occupant Weight : The number of occupants a vehicle is designed to seat multiplied by 68 kg (150 lb). See Vehicle Load Limits 0 177. Occupant Distribution : Designated seating positions. Outward Facing Sidewall : The side of an asymmetrical tire that has a particular side that faces outward when mounted on a vehicle. The side of the tire that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same moldings on the other sidewall of the tire. Passenger (P-Metric) Tire : A tire used on passenger cars and some light duty trucks and multipurpose vehicles. Recommended Inflation Pressure : Vehicle manufacturer's recommended tire inflation pressure as shown on the tire placard. See Tire Pressure 0 288 and Vehicle Load Limits 0 177. Radial Ply Tire : A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. 287 Rim : A metal support for a tire and upon which the tire beads are seated. Sidewall : The portion of a tire between the tread and the bead. Speed Rating : An alphanumeric code assigned to a tire indicating the maximum speed at which a tire can operate. Traction : The friction between the tire and the road surface. The amount of grip provided. Tread : The portion of a tire that comes into contact with the road. Treadwear Indicators : Narrow bands, sometimes called wear bars, that show across the tread of a tire when only 1.6 mm (1/ 16 in) of tread remains. See When It Is Time for New Tires 0 296. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 288 Vehicle Care UTQGS (Uniform Tire Quality Grading Standards) : A tire information system that provides consumers with ratings for a tire's traction, temperature, and treadwear. Ratings are determined by tire manufacturers using government testing procedures. The ratings are molded into the sidewall of the tire. See Uniform Tire Quality Grading 0 299. Vehicle Capacity Weight : The number of designated seating positions multiplied by 68 kg (150 lb) plus the rated cargo load. See Vehicle Load Limits 0 177. Vehicle Maximum Load on the Tire : Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight. Vehicle Placard : A label permanently attached to a vehicle showing the vehicle capacity weight and the original equipment tire size and recommended inflation pressure. See “Tire and Loading Information Label” under Vehicle Load Limits 0 177. Tire Pressure Tires need the correct amount of air pressure to operate effectively. { Warning Neither tire underinflation nor overinflation is good. Underinflated tires, or tires that do not have enough air, can result in: . Tire overloading and overheating which could lead to a blowout. . Premature or irregular wear. (Continued) Warning (Continued) . Poor handling. . Reduced fuel economy. Overinflated tires, or tires that have too much air, can result in: . Unusual wear. . Poor handling. . Rough ride. . Needless damage from road hazards. The Tire and Loading Information label on the vehicle indicates the original equipment tires and the correct cold tire inflation pressures. The recommended pressure is the minimum air pressure needed to support the vehicle's maximum load carrying capacity. See Vehicle Load Limits 0 177. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care How the vehicle is loaded affects vehicle handling and ride comfort. Never load the vehicle with more weight than it was designed to carry. When to Check Check the pressure of the tires once a month or more. Do not forget the compact spare, if the vehicle has one. The cold compact spare tire pressure should be at 420 kPa (60 psi). See Compact Spare Tire 0 309. How to Check Use a good quality pocket-type gauge to check tire pressure. Proper tire inflation cannot be determined by looking at the tire. Check the tire inflation pressure when the tires are cold, meaning the vehicle has not been driven for at least three hours or no more than 1.6 km (1 mi). Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the Tire and Loading Information label, no further adjustment is necessary. If the inflation pressure is low, add air until the recommended pressure is reached. If the inflation pressure is high, press on the metal stem in the center of the tire valve to release air. Recheck the tire pressure with the tire gauge. Put the valve caps back on the valve stems to keep out dirt and moisture and prevent leaks. Use only valve caps designed for the vehicle by GM. TPMS sensors could be damaged and would not be covered by the vehicle warranty. 289 Tire Pressure for High-Speed Operation { Warning Driving at high speeds, 160 km/h (100 mph) or higher, puts additional strain on tires. Sustained high-speed driving causes excessive heat buildup and can cause sudden tire failure. This could cause a crash, and you or others could be killed. Some high-speed rated tires require inflation pressure adjustment for high-speed operation. When speed limits and road conditions allow the vehicle to be driven at high speeds, make sure the tires are rated for high-speed operation, are in excellent condition, and are set to the correct cold tire inflation pressure for the vehicle load. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 290 Vehicle Care Vehicles with 255/65R18 or 255/55R20 size tires require inflation pressure adjustment when driving the vehicle at speeds of 160 km/h (100 mph) or higher. Set the cold inflation pressure to the maximum inflation pressure shown on the tire sidewall, or 280 kPa (41 psi), whichever is lower. Return the tires to the recommended cold tire inflation pressure when high-speed driving has ended. See Vehicle Load Limits 0 177 and Tire Pressure 0 288. The maximum load and inflation pressure is molded on the tire sidewall, in small letters, near the rim flange. It will read something like this: Maximum load 690 kg (1,521 lbs) 300 kPa (44 psi) Max. Press. Tire Pressure Monitor System The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. The TPMS sensors monitor the air pressure in your tires and transmit tire pressure readings to a receiver located in the vehicle. Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. sensors monitor the air pressure in the tires and transmit the tire pressure readings to a receiver located in the vehicle. Tire Pressure Monitor Operation When a low tire pressure condition is detected, the TPMS illuminates the low tire pressure warning light located on the instrument cluster. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the Tire and Loading Information label. See Vehicle Load Limits 0 177. This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designed to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel assembly, excluding the spare tire and wheel assembly. The TPMS A message to check the pressure in a specific tire displays in the Driver Information Center (DIC). The low tire pressure warning light and the DIC warning message come on at each ignition cycle until the tires are inflated to the correct inflation pressure. Using the DIC, tire See Tire Pressure Monitor Operation 0 291. See Radio Frequency Statement 0 354. 291 pressure levels can be viewed. For additional information and details about the DIC operation and displays see Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. The low tire pressure warning light may come on in cool weather when the vehicle is first started, and then turn off as the vehicle is driven. This could be an early indicator that the air pressure is getting low and needs to be inflated to the proper pressure. A Tire and Loading Information label, attached to your vehicle, shows the size of the original equipment tires and the correct inflation pressure for the tires when they are cold. See Vehicle Load Limits 0 177, for an example of the Tire and Loading Information label and its location. Also see Tire Pressure 0 288. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 292 Vehicle Care The TPMS can warn about a low tire pressure condition but it does not replace normal tire maintenance. See Tire Inspection 0 295, Tire Rotation 0 295 and Tires 0 281. Caution Tire sealant materials are not all the same. A non-approved tire sealant could damage the TPMS sensors. TPMS sensor damage caused by using an incorrect tire sealant is not covered by the vehicle warranty. Always use only the GM approved tire sealant available through your dealer or included in the vehicle. TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire pressure warning light flashes for about one minute and then stays on for the remainder of the ignition cycle. A DIC warning message also displays. The malfunction light and DIC warning message come on at each ignition cycle until the problem is corrected. Some of the conditions that can cause these to come on are: . One of the road tires has been replaced with the spare tire. The spare tire does not have a TPMS sensor. The malfunction light and DIC message should go off after the road tire is replaced and the sensor matching process is performed successfully. See “TPMS Sensor Matching Process” later in this section. . The TPMS sensor matching process was not done or not completed successfully after rotating the tires. The malfunction light and the DIC message should go off after successfully completing the sensor matching process. See "TPMS Sensor Matching Process" later in this section. . One or more TPMS sensors are missing or damaged. The malfunction light and the DIC message should go off when the TPMS sensors are installed and the sensor matching process is performed successfully. See your dealer for service. . Replacement tires or wheels do not match the original equipment tires or wheels. Tires and wheels other than those recommended could prevent the TPMS from functioning properly. See Buying New Tires 0 297. . Operating electronic devices or being near facilities using radio wave frequencies similar to the TPMS could cause the TPMS sensors to malfunction. If the TPMS is not functioning properly it cannot detect or signal a low tire pressure condition. See your dealer for service if the TPMS malfunction light and DIC message come on and stay on. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Tire Fill Alert (If Equipped) This feature provides visual and audible alerts outside the vehicle to help when inflating an underinflated tire to the recommended cold tire pressure. When the low tire pressure warning light comes on: 1. Park the vehicle in a safe, level place. 2. Set the parking brake firmly. 3. Place the vehicle in P (Park). 4. Add air to the tire that is underinflated. The turn signal lamp will flash. When the recommended pressure is reached, the horn sounds once and the turn signal lamp will stop flashing and briefly turn solid. Repeat these steps for all underinflated tires that have illuminated the low tire pressure warning light. { Warning Overinflating a tire could cause the tire to rupture and you or others could be injured. Do not exceed the maximum pressure listed on the tire sidewall. See Tire Sidewall Labeling 0 283 and Vehicle Load Limits 0 177. If the tire is overinflated by more than 35 kPa (5 psi), the horn will sound multiple times and the turn signal lamp will continue to flash for several seconds after filling stops. To release and correct the pressure, while the turn signal lamp is still flashing, briefly press the center of the valve stem. When the recommended pressure is reached, the horn sounds once. If the turn signal lamp does not flash within 15 seconds after starting to inflate the tire, the tire fill alert has not been activated or is not working. If the hazard warning flashers are on, the tire fill alert visual feedback will not work properly. 293 The TPMS will not activate the tire fill alert properly under the following conditions: . There is interference from an external device or transmitter. . The air pressure from the inflation device is not sufficient to inflate the tire. . There is a malfunction in the TPMS. . There is a malfunction in the horn or turn signal lamps. . The identification code of the TPMS sensor is not registered to the system. . The battery of the TPMS sensor is low. If the tire fill alert does not operate due to TPMS interference, move the vehicle about 1 m (3 ft) back or forward and try again. If the tire fill alert feature is not working, use a tire pressure gauge. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 294 Vehicle Care TPMS Sensor Matching Process Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the vehicle’s tires or replacing one or more of the TPMS sensors. The TPMS sensor matching process should also be performed after replacing a spare tire with a road tire containing the TPMS sensor. The malfunction light and the DIC message should go off at the next ignition cycle. The sensors are matched to the tire/wheel positions, using a TPMS relearn tool, in the following order: driver side front tire, passenger side front tire, passenger side rear tire, and driver side rear. See your dealer for service or to purchase a relearn tool. A TPMS relearn tool can also be purchased. See Tire Pressure Monitor Sensor Activation Tool at www.gmtoolsandequipment.com or call 1-800-GM TOOLS (1-800-468-6657). There are two minutes to match the first tire/wheel position, and five minutes overall to match all four tire/wheel positions. If it takes longer, the matching process stops and must be restarted. The TPMS sensor matching process is: 1. Set the parking brake. 2. Place the vehicle in Service Mode. See Ignition Positions 0 181. 3. Make sure the Tire Pressure info page option is turned on. The info pages on the DIC can be turned on and off through the Options menu. See Driver Information Center (DIC) (Base Level) 0 130 or Driver Information Center (DIC) (Uplevel) 0 133. 4. Use the DIC controls on the right side of the steering wheel to scroll to the Tire Pressure screen under the DIC info page. 5. Press and hold V in the center of the DIC controls. The horn sounds twice to signal the receiver is in relearn mode and the TIRE LEARNING ACTIVE message displays on the DIC screen. 6. Start with the driver side front tire. 7. Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor. A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position. 8. Proceed to the passenger side front tire, and repeat the procedure in Step 7. 9. Proceed to the passenger side rear tire, and repeat the procedure in Step 7. 10. Proceed to the driver side rear tire, and repeat the procedure in Step 7. The horn sounds two times to indicate the sensor Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care identification code has been matched to the driver side rear tire, and the TPMS sensor matching process is no longer active. The TIRE LEARNING ACTIVE message on the DIC display screen goes off. . There is cord or fabric showing through the tire's rubber. . The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric. . The tire has a bump, bulge, or split. . The tire has a puncture, cut, or other damage that cannot be repaired well because of the size or location of the damage. 11. Turn the vehicle off. 12. Set all four tires to the recommended air pressure level as indicated on the Tire and Loading Information label. Tire Inspection We recommend that the tires, including the spare tire, if the vehicle has one, be inspected for signs of wear or damage at least once a month. Replace the tire if: . The indicators at three or more places around the tire can be seen. 295 Anytime unusual wear is noticed, rotate the tires as soon as possible, check for proper tire inflation pressure, and check for damaged tires or wheels. If the unusual wear continues after the rotation, check the wheel alignment. See When It Is Time for New Tires 0 296 and Wheel Replacement 0 301. Tire Rotation Tires should be rotated every 12 000 km (7,500 mi). See Maintenance Schedule 0 328. Tires are rotated to achieve a uniform wear for all tires. The first rotation is the most important. Use this rotation pattern when rotating the tires. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 296 Vehicle Care If the vehicle has a compact spare tire, do not include it in the tire rotation. Adjust the front and rear tires to the recommended inflation pressure on the Tire and Loading Information label after the tires have been rotated. See Tire Pressure 0 288 and Vehicle Load Limits 0 177. Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation 0 291. Check that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Specifications 0 341 and “Removing the Flat Tire and Installing the Spare Tire” under Tire Changing 0 304. { Warning Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause a crash. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper towel can be used; however, use a scraper or wire brush later to remove all rust or dirt. Lightly coat the inner diameter of the wheel hub opening with wheel bearing grease after a wheel change or tire rotation to prevent corrosion or rust build-up. Do not get grease on the wheel mounting surface or on the wheel nuts or bolts. When It Is Time for New Tires Factors such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions affect the wear rate of the tires. Treadwear indicators are one way to tell when it is time for new tires. Treadwear indicators appear when the tires have only 1.6 mm (1/16 in) or less of tread remaining. See Tire Inspection 0 295 and Tire Rotation 0 295. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care The rubber in tires ages over time. This also applies to the spare tire, if the vehicle has one, even if it is never used. Multiple factors including temperatures, loading conditions, and inflation pressure maintenance affect how fast aging takes place. GM recommends that tires, including the spare if equipped, be replaced after six years, regardless of tread wear. To identify the age of a tire, use the tire manufacture date which is the last four digits of the DOT Tire Identification Number (TIN) which is molded into one side of the tire sidewall. The first two digits represent the week (01–52) and the last two digits, the year. For example, the third week of the year 2010 would have a four-digit DOT date of 0310. Vehicle Storage Tires age when stored normally mounted on a parked vehicle. Park a vehicle that will be stored for at least a month in a cool, dry, clean area away from direct sunlight to slow aging. This area should be free of grease, gasoline, or other substances that can deteriorate rubber. Parking for an extended period can cause flat spots on the tires that may result in vibrations while driving. When storing a vehicle for at least a month, remove the tires or raise the vehicle to reduce the weight from the tires. Buying New Tires GM has developed and matched specific tires for the vehicle. The original equipment tires installed were designed to meet General Motors Tire Performance Criteria Specification (TPC Spec) system rating. When replacement tires are needed, GM strongly recommends buying tires with the same TPC Spec rating. GM's exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of the 297 vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM's TPC Spec number is molded onto the tire's sidewall near the tire size. If the tires have an all-season tread design, the TPC Spec number will be followed by MS for mud and snow. See Tire Sidewall Labeling 0 283. GM recommends replacing worn tires in complete sets of four. Uniform tread depth on all tires will help to maintain the performance of the vehicle. Braking and handling performance may be adversely affected if all the tires are not replaced at the same time. If proper rotation and maintenance have been done, all four tires should wear out at about the same time. See Tire Rotation 0 295. However, if it is Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 298 Vehicle Care necessary to replace only one axle set of worn tires, place the new tires on the rear axle. Winter tires with the same speed rating as the original equipment tires may not be available for H, V, W, Y and ZR speed rated tires. Never exceed the winter tires’ maximum speed capability when using winter tires with a lower speed rating. { Warning Tires could explode during improper service. Attempting to mount or dismount a tire could cause injury or death. Only your dealer or authorized tire service center should mount or dismount the tires. { Warning Mixing tires of different sizes, tread patterns, or types on the same axle may cause loss of control of the vehicle, resulting in a crash or other vehicle damage. Use the same size, load range, and type of tires as the original tires. { Warning Using bias-ply tires on the vehicle may cause the wheel rim flanges to develop cracks after many miles of driving. A tire and/or wheel could fail suddenly and cause a crash. Use only radial-ply tires with the wheels on the vehicle. If the vehicle tires must be replaced with a tire that does not have a TPC Spec number, make sure they are the same size, load range, speed rating, and construction (radial) as the original tires. Vehicles that have a tire pressure monitoring system could give an inaccurate low-pressure warning if non-TPC Spec rated tires are installed. See Tire Pressure Monitor System 0 290. The Tire and Loading Information label indicates the original equipment tires on the vehicle. See Vehicle Load Limits 0 177. Different Size Tires and Wheels If wheels or tires are installed that are a different size than the original equipment wheels and tires, vehicle performance, including its braking, ride and handling characteristics, stability, and resistance to rollover may be affected. If the vehicle has electronic systems such as antilock Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care brakes, rollover airbags, traction control, electronic stability control, or All-Wheel Drive, the performance of these systems can also be affected. { Warning If different sized wheels are used, there may not be an acceptable level of performance and safety if tires not recommended for those wheels are selected. This increases the chance of a crash and serious injury. Only use GM specific wheel and tire systems developed for the vehicle, and have them properly installed by a GM certified technician. See Buying New Tires 0 297 and Accessories and Modifications 0 249. Uniform Tire Quality Grading The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance. This applies only to vehicles sold in the United States. The grades are molded on the sidewalls of most passenger car tires. The Uniform Tire Quality Grading (UTQG) system does not apply to deep tread, winter tires, compact spare tires, tires with nominal rim diameters of 10 to 12 inches (25 to 30 cm), or to some limited-production tires. While the tires available on General Motors passenger cars and light trucks may vary with respect to these grades, they must also conform to federal 299 safety requirements and additional General Motors Tire Performance Criteria (TPC) standards. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A All Passenger Car Tires Must Conform to Federal Safety Requirements In Addition To These Grades. Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1½) times as well on the government course as a tire Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 300 Vehicle Care graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. Traction The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. Warning: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. Wheel Alignment and Tire Balance The tires and wheels were aligned and balanced at the factory to provide the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing are not necessary on a regular basis. Consider an alignment check if there is unusual tire wear or the vehicle is significantly pulling to one side or the other. Some slight pull to the left or right, depending on the crown of the road and/or other road surface variations such as troughs or ruts, is normal. If the vehicle is vibrating when driving on a smooth Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care road, the tires and wheels may need to be rebalanced. See your dealer for proper diagnosis. Wheel Replacement Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts, and wheel nuts should be replaced. If the wheel leaks air, replace it. Some aluminum wheels can be repaired. See your dealer if any of these conditions exist. Your dealer will know the kind of wheel that is needed. Each new wheel should have the same load-carrying capacity, diameter, width, offset, and be mounted the same way as the one it replaces. Replace wheels, wheel bolts, wheel nuts, or Tire Pressure Monitor System (TPMS) sensors with new GM original equipment parts. { Warning Using the wrong replacement wheels, wheel bolts, or wheel nuts can be dangerous. It could affect the braking and handling of the vehicle. Tires can lose air, and cause loss of control, causing a crash. Always use the correct wheel, wheel bolts, and wheel nuts for replacement. Caution The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis. 301 Used Replacement Wheels { Warning Replacing a wheel with a used one is dangerous. How it has been used or how far it has been driven may be unknown. It could fail suddenly and cause a crash. When replacing wheels, use a new GM original equipment wheel. Tire Chains { Warning If the vehicle has a tire size other than 255/65R18, do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. The area damaged by the tire chains could (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 302 Vehicle Care Warning (Continued) cause loss of control and a crash. Use another type of traction device only if its manufacturer recommends it for the vehicle's tire size combination and road conditions. Follow that manufacturer's instructions. To avoid vehicle damage, drive slow and readjust or remove the traction device if it contacts the vehicle. Do not spin the wheels. If traction devices are used, install them on the front tires. Caution If the vehicle is equipped with 255/65R18 size tires, use tire chains only where legal and only when necessary. Use low profile chains that add no more than 12 mm thickness to the tire tread and inner sidewall. Use chains (Continued) Caution (Continued) that are the proper size for the tires. Install them on the tires of the front axle. Do not use chains on the tires of the rear axle. Tighten them as tightly as possible with the ends securely fastened. Drive slowly and follow the chain manufacturer's instructions. If the chains contact the vehicle, stop and retighten them. If the contact continues, slow down until it stops. Driving too fast or spinning the wheels with chains on will damage the vehicle. If a Tire Goes Flat It is unusual for a tire to blow out while driving, especially if the tires are maintained properly. See Tires 0 281. If air goes out of a tire, it is much more likely to leak out slowly. But if there ever is a blowout, here are a few tips about what to expect and what to do: If a front tire fails, the flat tire creates a drag that pulls the vehicle toward that side. Take your foot off the accelerator pedal and grip the steering wheel firmly. Steer to maintain lane position, and then gently brake to a stop, well off the road, if possible. A rear blowout, particularly on a curve, acts much like a skid and may require the same correction as used in a skid. Stop pressing the accelerator pedal and steer to straighten the vehicle. It may be very bumpy and noisy. Gently brake to a stop, well off the road, if possible. { Warning Driving on a flat tire will cause permanent damage to the tire. Re-inflating a tire after it has been driven on while severely underinflated or flat may cause a blowout and a serious crash. Never attempt to re-inflate a tire (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Warning (Continued) that has been driven on while severely underinflated or flat. Have your dealer or an authorized tire service center repair or replace the flat tire as soon as possible. { Warning Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tire. If it is used for anything else, you or others could be badly injured or killed if the vehicle slips off the jack. If a jack is provided with the vehicle, only use it for changing a flat tire. If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place, well off the road, if possible. Turn on the hazard warning flashers. See Hazard Warning Flashers 0 150. { Warning Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall causing injury or death. Find a level place to change the tire. To help prevent the vehicle from moving: 303 Warning (Continued) 5. Place wheel blocks, if equipped, on both sides of the tire at the opposite corner of the tire being changed. When the vehicle has a flat tire (2), use the following example as a guide to assist in the placement of the wheel blocks (1), if equipped. 1. Set the parking brake firmly. 2. Put an automatic transmission in P (Park) or a manual transmission in 1 (First) or R (Reverse). 3. Turn off the engine and do not restart while the vehicle is raised. 4. Do not allow passengers to remain in the vehicle. (Continued) 1. Wheel Block (If Equipped) 2. Flat Tire The following information explains how to repair or change a tire. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 304 Vehicle Care Tire Changing Removing the Spare Tire and Tools To access the spare tire and tools: 1. Open the liftgate. See Liftgate 0 21. 4. Turn the wing nut (3) counterclockwise to remove the jack (1) and wheel wrench (2). Place the tool container near the tire being changed. 5. Remove the spare tire and place it next to the tire being changed. 2. Lift the load floor. 3. Remove the cargo management system. See Cargo Management System 0 97. Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before proceeding. See If a Tire Goes Flat 0 302. 2. Turn the wheel wrench counterclockwise to loosen all the wheel nuts, but do not remove them yet. 3. Place the jack near the flat tire. Caution Make sure that the jack lift head is in the correct position or you may damage your vehicle. The repairs would not be covered by your warranty. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Warning (Continued) killed. Never get under a vehicle when it is supported only by a jack. { Warning 4. Position the jack lift head at the jack location nearest the flat tire. The jacking location is indicated by a half circle notch in the metal flange. The jack must not be used in any other position. { Warning Getting under a vehicle when it is lifted on a jack is dangerous. If the vehicle slips off the jack, you could be badly injured or (Continued) Raising the vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle. { Warning Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with (Continued) 305 Warning (Continued) the vehicle, it is designed only for changing a flat tire. If it is used for anything else, you or others could be badly injured or killed if the vehicle slips off the jack. If a jack is provided with the vehicle, only use it for changing a flat tire. Caution Using a jack to raise the vehicle without positioning it correctly could damage your vehicle. When raising your vehicle on a jack, be sure to position it correctly under the frame and avoid contact with the plastic molding. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 306 Vehicle Care Warning (Continued) towel can be used; however, use a scraper or wire brush later to remove all rust or dirt. 5. Turn the wheel wrench clockwise to raise the jack lift head until the slots in the jack head fit into the metal flange behind the cut out on the plastic molding. Do not raise the vehicle yet. 6. Put the compact spare tire near you. 7. Turn the wrench clockwise in the jack to raise the vehicle. Raise the vehicle far enough off the ground so that there is enough room for the spare tire to fit under the wheel well. 8. Remove all of the wheel nuts. 9. Remove the flat tire. { Warning Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause a crash. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper (Continued) 10. Remove any rust or dirt from the wheel bolts, mounting surfaces, and spare wheel. 11. Place the compact spare tire on the wheel-mounting surface. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care { Warning Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle's wheel could fall off, causing a crash. 12. Reinstall the wheel nuts. Tighten each nut by hand until the wheel is held against the hub. 13. Lower the vehicle by turning the jack handle counterclockwise. { Warning Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque specification after replacing. Follow the torque specification supplied by the aftermarket manufacturer when (Continued) 307 Warning (Continued) using accessory locking wheel nuts. See Capacities and Specifications 0 341 for original equipment wheel nut torque specifications. Caution Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper torque specification. See Capacities and Specifications 0 341 for the wheel nut torque specification. 14. Tighten the wheel nuts firmly in a crisscross sequence, as shown. 15. Lower the jack all the way and remove the jack from under the vehicle. 16. Tighten the wheel nuts firmly with the wheel wrench. When reinstalling the wheel cover or center cap on the full-size tire, tighten all six plastic caps hand snug with the aid of the wheel wrench and tighten them with the wheel wrench an additional one-quarter of a turn. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 308 Vehicle Care Caution Storing the Flat Tire To store the flat tire: Wheel covers will not fit on the vehicle's compact spare. If you try to put a wheel cover on the compact spare, the cover or the spare could be damaged. { Warning Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. 1. 2. 3. 4. Liftgate Hinges Cable Center of the Wheel Door Striker 1. Remove the cable package from under the spare tire, jack, and tools. 2. Remove the small cap by tapping the back of the cap with the extension of the shaft, if the vehicle has aluminum wheels. 3. Put the flat tire in the rear storage area with the valve stem facing the rear of the vehicle. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care 4. Pull the cable through the door striker and the center of the wheel. 309 2. Lift the load floor. 3. Remove the cargo management system. 4. Put back the spare tire and all tools as they were stored in the rear storage compartment. 5. Install the cargo management system and load floor. 8. Make sure the metal tube is centered at the striker. Push the tube toward the front of the vehicle. 5. Lower the liftgate enough to be able to hook the cable onto the outside portion of the liftgate hinges. 6. Hook the other end of the cable onto the outside portion of the liftgate hinge on the other side of the vehicle. 7. Pull on the cable to make sure it is secure. 9. Close the liftgate and make sure it is fully latched. The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can. Storing the Compact Spare Tire and Tools To store the spare tire and tools: 1. Open the liftgate. See Liftgate 0 21. The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can. Compact Spare Tire { Warning Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a crash and you or others could be injured. Use only one compact spare tire at a time. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 310 Vehicle Care If this vehicle has a compact spare tire, it was fully inflated when new; however, it can lose air over time. Check the inflation pressure regularly. It should be 420 kPa (60 psi). Stop as soon as possible and check that the spare tire is correctly inflated after being installed on the vehicle. The compact spare tire is designed for temporary use only. The vehicle will perform differently with the spare tire installed and it is recommended that the vehicle speed be limited to 80 km/h (50 mph). To conserve the tread of the spare tire, have the standard tire repaired or replaced as soon as convenient and return the spare tire to the storage area. When using a compact spare tire, the ABS and Traction Control systems may engage until the spare tire is recognized by the vehicle, especially on slippery roads. Adjust driving to reduce possible wheel slip. Performance of the All-Wheel Drive (AWD) system will be automatically reduced to protect the system when using the compact spare. To restore the AWD and prevent excessive wear on the clutch in the AWD, replace the compact spare tire with a full-size tire as soon as possible. Caution When the compact spare is installed, do not take the vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails which can damage the tire, wheel, and other parts of the vehicle. Do not use the compact spare on other vehicles. Do not mix the compact spare tire or wheel with other wheels or tires. They will not fit. Keep the spare tire and its wheel together. Caution Tire chains will not fit the compact spare. Using them can damage the vehicle and the chains. Do not use tire chains on the compact spare. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Jump Starting Jump Starting - North America For more information about the vehicle battery, see Battery - North America 0 266. If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. { Warning WARNING: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. WASH HANDS AFTER (Continued) 311 Warning (Continued) Caution HANDLING. For more information go to www.P65Warnings.ca.gov/ passenger-vehicle. Ignoring these steps could result in costly damage to the vehicle that would not be covered by the vehicle warranty. Trying to start the vehicle by pushing or pulling it will not work, and it could damage the vehicle. See California Proposition 65 Warning 0 248 and the back cover. { Warning Batteries can hurt you. They can be dangerous because: . They contain acid that can burn you. . They contain gas that can explode or ignite. . They contain enough electricity to burn you. If you do not follow these steps exactly, some or all of these things can hurt you. 1. Discharged Battery Positive (+) Terminal 2. Discharged Battery Remote Negative (-) Terminal Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 312 Vehicle Care 3. Good Battery Negative (-) Terminal 4. Good Battery Positive (+) Terminal The jump start positive (+) Terminal (1) and the negative remote negative terminal (2) for the discharged battery are on the driver side of the vehicle. The jump start positive (+) terminal (4) and negative (-) terminal (3) are on the battery of the vehicle providing the jump start. The positive jump start connection for the discharged battery is under a cover. Remove the cover to expose the terminal. 1. Check the other vehicle. It must have a 12-volt battery with a negative ground system. Caution If the other vehicle does not have a 12-volt system with a negative ground, both vehicles can be (Continued) Caution (Continued) damaged. Only use a vehicle that has a 12-volt system with a negative ground for jump starting. 2. Position the two vehicles so that they are not touching. 3. Set the parking brake firmly and put the shift lever in P (Park) with an automatic transmission, or Neutral with a manual transmission. See Shifting Into Park 0 186. Caution If any accessories are left on or plugged in during the jump starting procedure, they could be damaged. The repairs would not be covered by the vehicle warranty. Whenever possible, turn off or unplug all accessories on either vehicle when jump starting. 4. Turn the ignition off. Turn off all lights and accessories in both vehicles, except the hazard warning flashers if needed. { Warning An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing, and tools away from any underhood electric fan. { Warning Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Battery fluid contains acid that can burn you. Do not get it on you. If you accidentally get it in your eyes or on your skin, flush the place with water and get medical help immediately. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care { Warning Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 5. Connect one end of the red positive (+) cable to the positive (+) terminal on the discharged battery. 6. Connect the other end of the red positive (+) cable to the positive (+) terminal of the good battery. 7. Connect one end of the black negative (–) cable to the negative (–) terminal of the good battery. 8. Connect the other end of the black negative (–) cable to the remote negative (–) terminal for the discharged battery. 9. Start the engine in the vehicle with the good battery and run the engine at idle speed for at least four minutes. 10. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service. Caution If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by the vehicle warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal. 313 Towing the Vehicle Caution Incorrectly towing a disabled vehicle may cause damage. The damage would not be covered by the vehicle warranty. Do not lash or hook to suspension components. Use the proper straps around the tires to secure the vehicle. Do not drag a locked wheel/tire. Use tire skates or dollies under any locked wheel/ tire while loading the vehicle. Do not use a sling type lift to tow the vehicle. This could damage the vehicle. Jumper Cable Removal Reverse the sequence exactly when removing the jumper cables. After starting the disabled vehicle and removing the jumper cables, allow it to idle for several minutes. Caution If the vehicle cannot be shifted into Neutral (N), do not use the tow eye to tow the vehicle. Vehicle damage may occur. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 314 Vehicle Care GM recommends a flatbed tow truck to transport a disabled vehicle. Use ramps to help reduce approach angles, if necessary. A towed vehicle should have its drive wheels off the ground. Contact Roadside Assistance or a professional towing service if the disabled vehicle must be towed. Front Attachment Points The vehicle is equipped with specific attachment points to be used by the towing provider. These holes may be used to pull the vehicle from a flat road surface onto the flatbed tow truck. Recreational Vehicle Towing Recreational vehicle towing means towing the vehicle behind another vehicle, such as behind a motor home. The two most common types of recreational vehicle towing are known as dinghy towing and dolly towing. Dinghy towing is towing the vehicle with all four wheels on the ground. Dolly towing is towing the vehicle with two wheels on the ground and two wheels up on a device known as a dolly. Here are some important things to consider before recreational vehicle towing: . Before towing the vehicle, become familiar with the local laws that apply to recreational vehicle towing. These laws may vary by region. . The towing capacity of the towing vehicle. Be sure to read the tow vehicle manufacturer's recommendations. . How far the vehicle will be towed. Some vehicles have restrictions on how far and how long they can be towed. . The proper towing equipment. See your dealer or trailering professional for additional advice and equipment recommendations. . If the vehicle is ready to be towed. Just as preparing the vehicle for a long trip, make sure the vehicle is prepared to be towed. Caution Use of a shield mounted in front of the vehicle grille could restrict airflow and cause damage to the transmission. The repairs would not be covered by the vehicle warranty. If using a shield, only use one that attaches to the towing vehicle. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Dinghy Towing towed, a dolly should be used. See the following information on dolly towing. Dolly Towing 315 4. Hold the brake pedal and press the parking brake switch for 15 seconds until the service parking brake light flashes. 5. While the service parking brake light is still flashing, remove your foot from the brake pedal and release the parking brake switch. 6. Immediately press and release the parking brake switch again while the service park brake light is still flashing. 7. Start the vehicle and drive onto the dolly. Caution If the vehicle is towed with all four wheels on the ground, the drivetrain components could be damaged. The repairs would not be covered by the vehicle warranty. Do not tow the vehicle with all four wheels on the ground. The vehicle is not designed to be towed with all four wheels on the ground. If the vehicle must be 8. Place the vehicle in P (Park). Driving onto a Dolly 9. Turn off the vehicle. 1. Park the vehicle on level ground in front of the dolly and turn the vehicle off. 10. Open the hood. 2. Make sure the parking brake is released. 12. Disconnect the negative (–) terminal connector from the 12-volt battery. 3. Press and hold ENGINE START/STOP with your foot off the brake for five seconds. 11. Exit the vehicle and secure the vehicle onto the dolly. 13. Close the hood of the vehicle. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 316 Vehicle Care Removing the Vehicle from a Dolly 1. Make sure the vehicle is secured to the dolly. 2. Open the door and open the hood of the vehicle. 3. Connect the negative (-) terminal connector from the 12-volt battery. 4. Press and hold ENGINE START/STOP with your foot off the brake for five seconds. 5. Hold the brake pedal and press the parking brake switch for five seconds until the parking brake light flashes. 6. Turn the vehicle off. 7. Unsecure the vehicle and remove it from the dolly. 8. Do not drive in Service Mode with the parking brake set Towing the Vehicle from the Rear Caution Towing the vehicle from the rear could damage it. Also, repairs would not be covered by the vehicle warranty. Never have the vehicle towed from the rear. Do not tow the vehicle from the rear. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Appearance Care Exterior Care Locks Locks are lubricated at the factory. Use a de-icing agent only when absolutely necessary, and have the locks greased after using. See Recommended Fluids and Lubricants 0 337. Washing the Vehicle To preserve the vehicle's finish, wash it often and out of direct sunlight. Caution Do not use petroleum-based, acidic, or abrasive cleaning agents as they can damage the vehicle's paint, metal, or plastic parts. If damage occurs, it would not be covered by the vehicle warranty. Approved cleaning products can be obtained from (Continued) Caution (Continued) your dealer. Follow all manufacturer directions regarding correct product usage, necessary safety precautions, and appropriate disposal of any vehicle care product. Caution Avoid using high-pressure washes closer than 30 cm (12 in) to the surface of the vehicle. Use of power washers exceeding 8,274 kPa (1,200 psi) can result in damage or removal of paint and decals. Caution Do not power wash any component under the hood that has this e symbol. (Continued) 317 Caution (Continued) This could cause damage that would not be covered by the vehicle warranty. If using an automatic car wash, follow the car wash instructions. The windshield wiper and rear window wiper, if equipped, must be off. Remove any accessories that may be damaged or interfere with the car wash equipment. Rinse the vehicle well, before washing and after, to remove all cleaning agents completely. If they are allowed to dry on the surface, they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting. Finish Care Application of aftermarket clearcoat sealant/wax materials is not recommended. If painted surfaces are damaged, see your dealer to Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 318 Vehicle Care have the damage assessed and repaired. Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage the vehicle's finish if they remain on painted surfaces. Wash the vehicle as soon as possible. If necessary, use non-abrasive cleaners that are marked safe for painted surfaces to remove foreign matter. Occasional hand waxing or mild polishing should be done to remove residue from the paint finish. See your dealer for approved cleaning products. Do not apply waxes or polishes to uncoated plastic, vinyl, rubber, decals, simulated wood, or flat paint as damage can occur. Caution Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it. Use only non-abrasive waxes and polishes that are made for a basecoat/ clearcoat paint finish on the vehicle. To keep the paint finish looking new, keep the vehicle garaged or covered whenever possible. Protecting Exterior Bright Metal Moldings Caution Failure to clean and protect the bright metal moldings can result in a hazy white finish or pitting. This damage would not be covered by the vehicle warranty. The bright metal moldings on the vehicle are aluminum, chrome, or stainless steel. To prevent damage always follow these cleaning instructions: . Be sure the molding is cool to the touch before applying any cleaning solution. . Use only approved cleaning solutions for aluminum, chrome, or stainless steel. Some cleaners are highly acidic or contain alkaline substances and can damage the moldings. . Always dilute a concentrated cleaner according to the manufacturer’s instructions. . Do not use cleaners that are not intended for automotive use. . Use a nonabrasive wax on the vehicle after washing to protect and extend the molding finish. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Cleaning Exterior Lamps/ Lenses, Emblems, Decals, and Stripes Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses, emblems, decals, and stripes. Follow instructions under "Washing the Vehicle" previously in this section. . Aftermarket appearance caps or covers while the lamps are illuminated, due to excessive heat generated Caution Failure to clean lamps properly can cause damage to the lamp cover that would not be covered by the vehicle warranty. Lamp covers are made of plastic, and some have a UV protective coating. Do not clean or wipe them when dry. Do not use any of the following on lamp covers: . Abrasive or caustic agents . Washer fluids and other cleaning agents in higher concentrations than suggested by the manufacturer . Solvents, alcohols, fuels, or other harsh cleaners . Ice scrapers or other hard items Caution Using wax on low gloss black finish stripes can increase the gloss level and create a non-uniform finish. Clean low gloss stripes with soap and water only. Air Intakes Clear debris from the air intakes, between the hood and windshield, when washing the vehicle. 319 Windshield and Wiper Blades Clean the outside of the windshield with glass cleaner. Clean rubber blades using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged. Damage can be caused by extreme dusty conditions, sand, salt, heat, sun, snow, and ice. Weatherstrips Apply weatherstrip lubricant on weatherstrips to make them last longer, seal better, and not stick or squeak. Lubricate weatherstrips at least once a year. Hot, dry climates may require more frequent application. Black marks from rubber material on painted surfaces Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 320 Vehicle Care can be removed by rubbing with a clean cloth. See Recommended Fluids and Lubricants 0 337. Tires Use a stiff brush with tire cleaner to clean the tires. Caution Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/ or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on the vehicle. Wheels and Wheel Trim Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied. Caution Chrome wheels and chrome wheel trim may be damaged if the vehicle is not washed after driving on roads that have been sprayed with magnesium chloride or calcium chloride. These are used on roads for conditions such as dust and ice. Always wash the chrome with soap and water after exposure. Caution To avoid surface damage on wheels and wheel trim, do not use strong soaps, chemicals, abrasive polishes, cleaners, or brushes. Use only GM approved cleaners. Do not drive the vehicle through an automatic car wash that uses silicon carbide tire/wheel cleaning brushes. (Continued) Caution (Continued) Damage could occur and the repairs would not be covered by the vehicle warranty. Brake System Visually inspect brake lines and hoses for proper attachment, connections, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect drum brake linings/shoes for wear or cracks. Inspect all other brake parts for cracks and leaks. Steering, Suspension, and Chassis Components Visually inspect steering, suspension, and chassis components for damaged, loose, or missing parts or signs of wear at least once a year. Inspect power steering for proper electrical connections, binding, cracks, chafing, etc. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care Visually check constant velocity joint boots and axle seals for leaks. Body Component Lubrication Lubricate all key lock cylinders, hood hinges, liftgate hinges, and the steel fuel door hinges, unless the components are plastic. Applying silicone grease on weatherstrips with a clean cloth will make them last longer, seal better, and not stick or squeak. Underbody Maintenance At least twice a year, spring and fall, use plain water to flush any corrosive materials from the underbody. Take care to thoroughly clean any areas where mud and other debris can collect. Do not directly power wash the transfer case and/or front/rear axle output seals. High pressure water can overcome the seals and contaminate the fluid. Contaminated fluid will decrease the life of the transfer case and/or axles and should be replaced. 321 Sheet Metal Damage Interior Care If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. To prevent dirt particle abrasions, regularly clean the vehicle's interior. Immediately remove any soils. Newspapers or dark garments can transfer color to the vehicle’s interior. Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty. Finish Damage Quickly repair minor chips and scratches with touch-up materials available from your dealer to avoid corrosion. Larger areas of finish damage can be corrected in your dealer's body and paint shop. Chemical Paint Spotting Airborne pollutants can fall upon and attack painted vehicle surfaces causing blotchy, ring-shaped discolorations, and small, irregular dark spots etched into the paint surface. See “Finish Care” previously in this section. Use a soft bristle brush to remove dust from knobs and crevices on the instrument cluster. Using a mild soap solution, immediately remove hand lotions, sunscreen, and insect repellent from all interior surfaces or permanent damage may result. Use cleaners specifically designed for the surfaces being cleaned to prevent permanent damage. Apply all cleaners directly to the cleaning cloth. Do not spray cleaners on any switches or controls. Remove cleaners quickly. Before using cleaners, read and follow all safety instructions on the label. While cleaning the interior, open the doors and windows to get proper ventilation. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 322 Vehicle Care To prevent damage, do not clean the interior using the following cleaners or techniques: . Never use a razor or any other sharp object to remove soil from any interior surface. . Never use a brush with stiff bristles. . Never rub any surface aggressively or with too much pressure. . Do not use laundry detergents or dishwashing soaps with degreasers. For liquid cleaners, use approximately 20 drops per 3.8 L (1 gal) of water. A concentrated soap solution will create streaks and attract dirt. Do not use solutions that contain strong or caustic soap. . Do not heavily saturate the upholstery when cleaning. . Do not use solvents or cleaners containing solvents. Interior Glass Coated Moldings To clean, use a terry cloth fabric dampened with water. Wipe droplets left behind with a clean dry cloth. If necessary, use a commercial glass cleaner after cleaning with plain water. Coated moldings should be cleaned. . When lightly soiled, wipe with a sponge or soft, lint-free cloth dampened with water. . When heavily soiled, use warm soapy water. Caution To prevent scratching, never use abrasive cleaners on automotive glass. Abrasive cleaners or aggressive cleaning may damage the rear window defogger. Cleaning the windshield with water during the first three to six months of ownership will reduce tendency to fog. Speaker Covers Vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with water and mild soap. Fabric/Carpet/Suede Start by vacuuming the surface using a soft brush attachment. If a rotating vacuum brush attachment is being used, only use it on the floor carpet. Before cleaning, gently remove as much of the soil as possible: . Gently blot liquids with a paper towel. Continue blotting until no more soil can be removed. . For solid soils, remove as much as possible prior to vacuuming. To clean: 1. Saturate a clean, lint-free colorfast cloth with water. Microfiber cloth is recommended to prevent lint transfer to the fabric or carpet. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care 2. Remove excess moisture by gently wringing until water does not drip from the cleaning cloth. Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays 3. Start on the outside edge of the soil and gently rub toward the center. Fold the cleaning cloth to a clean area frequently to prevent forcing the soil in to the fabric. Use a microfiber cloth on high gloss surfaces or vehicle displays. First, use a soft bristle brush to remove dirt that can scratch the surface. Then gently clean by rubbing with a microfiber cloth. Never use window cleaners or solvents. Periodically hand wash the microfiber cloth separately, using mild soap. Do not use bleach or fabric softener. Rinse thoroughly and air dry before next use. 4. Continue gently rubbing the soiled area until there is no longer any color transfer from the soil to the cleaning cloth. 5. If the soil is not completely removed, use a mild soap solution followed only by plain water. If the soil is not completely removed, it may be necessary to use a commercial upholstery cleaner or spot lifter. Test a small hidden area for colorfastness before using a commercial upholstery cleaner or spot lifter. If ring formation occurs, clean the entire fabric or carpet. After cleaning, use a paper towel to blot excess moisture. Caution Do not attach a device with a suction cup to the display. This may cause damage and would not be covered by the vehicle warranty. 323 Instrument Panel, Leather, Vinyl, Other Plastic Surfaces, Low Gloss Paint Surfaces, and Natural Open Pore Wood Surfaces Use a soft microfiber cloth dampened with water to remove dust and loose dirt. For a more thorough cleaning, use a soft microfiber cloth dampened with a mild soap solution. Caution Soaking or saturating leather, especially perforated leather, as well as other interior surfaces, may cause permanent damage. Wipe excess moisture from these surfaces after cleaning and allow them to dry naturally. Never use heat, steam, or spot removers. Do not use cleaners that contain silicone or wax-based products. Cleaners containing these solvents can permanently change (Continued) Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 324 Vehicle Care Caution (Continued) the appearance and feel of leather or soft trim, and are not recommended. Do not use cleaners that increase gloss, especially on the instrument panel. Reflected glare can decrease visibility through the windshield under certain conditions. Caution Use of air fresheners may cause permanent damage to plastics and painted surfaces. If an air freshener comes in contact with any plastic or painted surface in the vehicle, blot immediately and clean with a soft cloth dampened with a mild soap solution. Damage caused by air fresheners would not be covered by the vehicle warranty. Cargo Cover and Convenience Net Wash with warm water and mild detergent. Do not use chlorine bleach. Rinse with cold water, and then dry completely. Care of Seat Belts Keep belts clean and dry. { Warning Do not bleach or dye seat belt webbing. It may severely weaken the webbing. In a crash, they might not be able to provide adequate protection. Clean and rinse seat belt webbing only with mild soap and lukewarm water. Allow the webbing to dry. Floor Mats { Warning If a floor mat is the wrong size or is not properly installed, it can interfere with the pedals. Interference with the pedals can cause unintended acceleration and/or increased stopping distance which can cause a crash and injury. Make sure the floor mat does not interfere with the pedals. Use the following guidelines for proper floor mat usage. . The original equipment floor mats were designed for your vehicle. If the floor mats need replacing, it is recommended that GM certified floor mats be purchased. Non-GM floor mats may not fit properly and may interfere with the accelerator or brake pedal. Always check that the floor mats do not interfere with the pedals. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Vehicle Care . Do not use a floor mat if the vehicle is not equipped with a floor mat retainer on the driver side floor. . Use the floor mat with the correct side up. Do not turn it over. . Do not place anything on top of the driver side floor mat. . Use only a single floor mat on the driver side. . Do not place one floor mat on top of another. Button Retainer Some vehicles have floor mats with a button-type retainer. Removing and Replacing the Floor Mat 1. Pull up on the rear of the mat to unlock and remove. 2. Reinstall the floor mat by lining up the floor mat opening over the carpet retainer and snapping into position. 3. Make sure the floor mat is properly secured. Verify the floor mat does not interfere with the pedals. 325 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 326 Service and Maintenance Service and Maintenance General Information General Information . . . . . . . . . . 326 Maintenance Schedule Maintenance Schedule . . . . . . . 328 Special Application Services Special Application Services . . . . . . . . . . . . . . . . . . . . 333 Additional Maintenance and Care Additional Maintenance and Care . . . . . . . . . . . . . . . . . . . . 334 Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants . . . . . . . . . . . . . . . . . . . 337 Maintenance Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . 338 Maintenance Records Maintenance Records . . . . . . . . 339 General Information Your vehicle is an important investment. This section describes the required maintenance for the vehicle. Follow this schedule to help protect against major repair expenses resulting from neglect or inadequate maintenance. It may also help to maintain the value of the vehicle if it is sold. It is the responsibility of the owner to have all required maintenance performed. Your dealer has trained technicians who can perform required maintenance using genuine replacement parts. They have up-to-date tools and equipment for fast and accurate diagnostics. Many dealers have extended evening and Saturday hours, courtesy transportation, and online scheduling to assist with service needs. Your dealer recognizes the importance of providing competitively priced maintenance and repair services. With trained technicians, the dealer is the place for routine maintenance such as oil changes and tire rotations and additional maintenance items like tires, brakes, batteries, and wiper blades. Caution Damage caused by improper maintenance can lead to costly repairs and may not be covered by the vehicle warranty. Maintenance intervals, checks, inspections, recommended fluids, and lubricants are important to keep the vehicle in good working condition. Do not have chemical flushes that are not approved by GM performed on the vehicle. The use of flushes, solvents, cleaners, or lubricants that are not approved by GM could damage the vehicle, requiring expensive repairs that are not covered by the vehicle warranty. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Service and Maintenance The Tire Rotation and Required Services are the responsibility of the vehicle owner. It is recommended to have your dealer perform these services every 12 000 km/7,500 mi. Proper vehicle maintenance helps to keep the vehicle in good working condition, improves fuel economy, and reduces vehicle emissions. Because of the way people use vehicles, maintenance needs vary. There may need to be more frequent checks and services. The Additional Required Services Normal are for vehicles that: . Carry passengers and cargo within recommended limits on the Tire and Loading Information label. See Vehicle Load Limits 0 177. . Are driven on reasonable road surfaces within legal driving limits. . Use the recommended fuel. See Recommended Fuel 0 231. Refer to the information in the Maintenance Schedule Additional Required Services - Normal chart. The Additional Required Services Severe are for vehicles that are: . Mainly driven in heavy city traffic in hot weather. . Mainly driven in hilly or mountainous terrain. . Frequently towing a trailer. . Used for high speed or competitive driving. . Used for taxi, police, or delivery service. Refer to the information in the Maintenance Schedule Additional Required Services - Severe chart. 327 { Warning Performing maintenance work can be dangerous and can cause serious injury. Perform maintenance work only if the required information, proper tools, and equipment are available. If they are not, see your dealer to have a trained technician do the work. See Doing Your Own Service Work 0 249. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 328 Service and Maintenance Maintenance Schedule Owner Checks and Services At Each Fuel Stop . Check the engine oil level. See Engine Oil 0 253. Once a Month . Check the tire inflation pressures. See Tire Pressure 0 288. . Inspect the tires for wear. See Tire Inspection 0 295. . Check the windshield washer fluid level. See Washer Fluid 0 263. Engine Oil Change When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter changed within the next 1 000 km/600 mi. If driven under the best conditions, the engine oil life system may not indicate the need for vehicle service for up to a year. The engine oil and filter must be changed at least once a year and the oil life system must be reset. Your trained dealer technician can perform this work. If the engine oil life system is reset accidentally, service the vehicle within 5 000 km/3,000 mi since the last service. Reset the oil life system when the oil is changed. See Engine Oil Life System 0 255. Engine Air Filter Change When the REPLACE AT NEXT OIL CHANGE message displays, the engine air filter should be replaced at the next engine oil change. When the REPLACE ENGINE AIR FILTER SOON message displays, the engine air filter should be replaced at the earliest convenience. Reset the engine air filter life system after the engine air filter is replaced. See Engine Air Filter Life System 0 257. Air Conditioning Desiccant (Replace Every Seven Years) The air conditioning system requires maintenance every seven years. This service requires replacement of the desiccant to help the longevity and efficient operation of the air conditioning system. This service can be complex. See your dealer. Tire Rotation and Required Services Every 12 000 km/ 7,500 mi Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation 0 295. . Check engine oil level and oil life percentage. If needed, change engine oil and filter, and reset oil life system. See Engine Oil 0 253 and Engine Oil Life System 0 255. . If equipped with the engine air filter life system, check the air filter life percentage. If necessary, replace the engine air filter and reset the engine air filter life system. See Engine Air Filter Life System 0 257. If the vehicle is not equipped with the engine air filter life system, inspect the engine air cleaner filter. See Engine Air Cleaner/ Filter 0 257. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Service and Maintenance . Check engine coolant level. See Cooling System 0 258. . Check windshield washer fluid level. See Washer Fluid 0 263. . Check tire inflation pressures. See Tire Pressure 0 288. . Inspect tire wear. See Tire Inspection 0 295. . Visually check for fluid leaks. . Inspect brake system. See Exterior Care 0 317. . Visually inspect steering, suspension, and chassis components for damage, including cracks or tears in the rubber boots, loose or missing parts, or signs of wear at least once a year. See Exterior Care 0 317. . Inspect power steering for proper electrical connections, binding, cracks, chafing, etc. . Visually inspect halfshafts and drive shafts for excessive wear, lubricant leaks, and/or damage including: tube dents or cracks, constant velocity joint or universal joint looseness, cracked or missing boots, loose or missing boot clamps, center bearing excessive looseness, loose or missing fasteners, and axle seal leaks. . Check restraint system components. See Safety System Check 0 60. . Visually inspect fuel system for damage or leaks. . Visually inspect exhaust system and nearby heat shields for loose or damaged parts. . Lubricate body components. See Exterior Care 0 317. . Check starter switch. See Starter Switch Check 0 267. 329 . Check parking brake and automatic transmission park mechanism. See Park Brake and P (Park) Mechanism Check 0 267. . Check accelerator pedal for damage, high effort, or binding. Replace if needed. . Visually inspect gas strut for signs of wear, cracks, or other damage. Check the hold open ability of the strut. If the hold open ability is low, service the gas strut. See Gas Strut(s) 0 269. . Inspect sunroof track and seal, if equipped. See Sunroof 0 37. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 4 8 0 0 0 k m/3 0 ,0 0 0 mi 6 0 0 0 0 k m/3 7 ,5 0 0 mi 7 2 0 0 0 k m/4 5 ,0 0 0 mi 8 4 0 0 0 k m/5 2 ,5 0 0 mi 9 6 0 0 0 k m/6 0 ,0 0 0 mi 1 0 8 0 0 0 k m/6 7 ,5 0 0 mi 1 2 0 0 0 0 k m/7 5 ,0 0 0 mi 1 3 2 0 0 0 k m/8 2 ,5 0 0 mi 1 4 4 0 0 0 k m/9 0 ,0 0 0 mi 1 5 6 0 0 0 k m/9 7 ,5 0 0 mi 1 6 8 0 0 0 k m/1 0 5 ,0 0 0 mi 1 8 0 0 0 0 k m/11 2 ,5 0 0 mi 1 9 2 0 0 0 k m/1 2 0 ,0 0 0 mi 2 0 4 0 0 0 k m/1 2 7 ,5 0 0 mi 2 1 6 0 0 0 k m/1 3 5 ,0 0 0 mi 2 2 8 0 0 0 k m/1 4 2 ,5 0 0 mi 2 4 0 0 0 0 k m/1 5 0 ,0 0 0 mi Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed. Check engine air filter life percentage and status. Change engine air filter, if needed. 3 6 0 0 0 k m/2 2 ,5 0 0 mi Maintenance Schedule Additional Required Services - Normal 2 4 0 0 0 k m/1 5 ,0 0 0 mi Service and Maintenance 1 2 0 0 0 k m/7 ,5 0 0 mi 330 @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ Replace passenger compartment air filter. (1) @ @ @ @ @ Inspect evaporative control system. (2) @ @ @ If the vehicle is not equipped with the engine air filter life system, replace engine air cleaner filter. (3) @ @ @ @ Replace spark plugs. Inspect spark plug wires. Change rear axle fluid, if equipped with AWD. (4) @ Drain and fill engine cooling system. (5) @ Visually inspect accessory drive belts. (6) @ Replace brake fluid. (7) Replace windshield wiper blades. (8) Replace hood and/or body lift support gas struts. (9) Replace air conditioning desiccant. (10) @ @ @ @ @ @ @ @ @ @ @ @ Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Service and Maintenance Footnotes — Maintenance Schedule Additional Required Services - Normal (1) Or every two years, whichever comes first. More frequent passenger compartment air filter replacement may be needed if driving in areas with heavy traffic, poor air quality, high dust levels, or environmental allergens. Passenger compartment air filter replacement may also be needed if there is reduced airflow, window fogging, or odors. Your GM dealer can help determine when to replace the filter. (2) Visually check all fuel and vapor lines and hoses for proper attachment, connection, routing, and condition. (3) Or every four years, whichever comes first. If driving in dusty conditions, inspect the filter at each oil change or more often as needed. See Engine Air Cleaner/Filter 0 257. (4) Do not directly power wash the transfer case and/or front/rear axle output seals. High pressure water can overcome the seals and contaminate the transfer case fluid. Contaminated fluid will decrease the life of the transfer case and/or axles and should be replaced. (5) Or every five years, whichever comes first. See Cooling System 0 258. 331 (6) Or every 10 years, whichever comes first. Inspect for fraying, excessive cracking, or damage; replace, if needed. (7) Replace brake fluid every five years. See Brake Fluid 0 265. (8) Or every 12 months, whichever comes first. See Wiper Blade Replacement 0 268. (9) Or every 10 years, whichever comes first. See Gas Strut(s) 0 269. (10) Replace air conditioning desiccant every seven years. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 4 8 0 0 0 k m/3 0 ,0 0 0 mi 6 0 0 0 0 k m/3 7 ,5 0 0 mi 7 2 0 0 0 k m/4 5 ,0 0 0 mi 8 4 0 0 0 k m/5 2 ,5 0 0 mi 9 6 0 0 0 k m/6 0 ,0 0 0 mi 1 0 8 0 0 0 k m/6 7 ,5 0 0 mi 1 2 0 0 0 0 k m/7 5 ,0 0 0 mi 1 3 2 0 0 0 k m/8 2 ,5 0 0 mi 1 4 4 0 0 0 k m/9 0 ,0 0 0 mi 1 5 6 0 0 0 k m/9 7 ,5 0 0 mi 1 6 8 0 0 0 k m/1 0 5 ,0 0 0 mi 1 8 0 0 0 0 k m/11 2 ,5 0 0 mi 1 9 2 0 0 0 k m/1 2 0 ,0 0 0 mi 2 0 4 0 0 0 k m/1 2 7 ,5 0 0 mi 2 1 6 0 0 0 k m/1 3 5 ,0 0 0 mi 2 2 8 0 0 0 k m/1 4 2 ,5 0 0 mi 2 4 0 0 0 0 k m/1 5 0 ,0 0 0 mi Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed. Check engine air filter life percentage and status. Change engine air filter, if needed. 3 6 0 0 0 k m/2 2 ,5 0 0 mi Maintenance Schedule Additional Required Services - Severe 2 4 0 0 0 k m/1 5 ,0 0 0 mi Service and Maintenance 1 2 0 0 0 k m/7 ,5 0 0 mi 332 @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ Replace passenger compartment air filter. (1) @ @ @ @ @ Inspect evaporative control system. (2) @ @ @ If the vehicle is not equipped with the engine air filter life system, replace engine air cleaner filter. (3) @ @ @ Change automatic transmission fluid. @ @ @ @ Replace spark plugs. Inspect spark plug wires. @ Change rear axle fluid, if equipped with AWD. (4) @ Drain and fill engine cooling system. (5) @ Visually inspect accessory drive belts. (6) @ Replace brake fluid. (7) Replace windshield wiper blades. (8) Replace hood and/or body lift support gas struts. (9) Replace air conditioning desiccant. (10) @ @ @ @ @ @ @ @ @ @ @ @ Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Service and Maintenance Footnotes — Maintenance Schedule Additional Required Services - Severe (1) Or every two years, whichever comes first. More frequent passenger compartment air filter replacement may be needed if driving in areas with heavy traffic, poor air quality, high dust levels, or environmental allergens. Passenger compartment air filter replacement may also be needed if there is reduced airflow, window fogging, or odors. Your GM dealer can help determine when to replace the filter. (2) Visually check all fuel and vapor lines and hoses for proper attachment, connection, routing, and condition. (3) Or every four years, whichever comes first. If driving in dusty conditions, inspect the filter at each oil change or more often as needed. See Engine Air Cleaner/Filter 0 257. (4) Do not directly power wash the transfer case and/or front/rear axle output seals. High pressure water can overcome the seals and contaminate the transfer case fluid. Contaminated fluid will decrease the life of the transfer case and/or axles and should be replaced. (5) Or every five years, whichever comes first. See Cooling System 0 258. (6) Or every 10 years, whichever comes first. Inspect for fraying, excessive cracking, or damage; replace, if needed. (7) Replace brake fluid every five years. See Brake Fluid 0 265. (8) Or every 12 months, whichever comes first. See Wiper Blade Replacement 0 268. (9) Or every 10 years, whichever comes first. See Gas Strut(s) 0 269. (10) Replace air conditioning desiccant every seven years. 333 Special Application Services . Severe Commercial Use Vehicles Only: Lubricate chassis components every oil change. . Have underbody flushing service performed. See "Underbody Maintenance" in Exterior Care 0 317. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 334 Service and Maintenance Additional Maintenance and Care Your vehicle is an important investment and caring for it properly may help to avoid future costly repairs. To maintain vehicle performance, additional maintenance services may be required. It is recommended that your dealer perform these services — their trained dealer technicians know your vehicle best. Your dealer can also perform a thorough assessment with a multi-point inspection to recommend when your vehicle may need attention. The following list is intended to explain the services and conditions to look for that may indicate services are required. Battery Brakes The 12-volt battery supplies power to start the engine and operate any additional electrical accessories. . To avoid break-down or failure to start the vehicle, maintain a battery with full cranking power. . Trained dealer technicians have the diagnostic equipment to test the battery and ensure that the connections and cables are corrosion-free. Brakes stop the vehicle and are crucial to safe driving. . Signs of brake wear may include chirping, grinding, or squealing noises, or difficulty stopping. . Trained dealer technicians have access to tools and equipment to inspect the brakes and recommend quality parts engineered for the vehicle. Belts . Belts may need replacing if they squeak or show signs of cracking or splitting. . Trained dealer technicians have access to tools and equipment to inspect the belts and recommend adjustment or replacement when necessary. Proper fluid levels and approved fluids protect the vehicle’s systems and components. See Recommended Fluids and Lubricants 0 337 for GM approved fluids. . Engine oil and windshield washer fluid levels should be checked at every fuel fill. . Instrument cluster lights may come on to indicate that fluids may be low and need to be filled. Fluids Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Service and Maintenance Hoses Shocks and Struts Hoses transport fluids and should be regularly inspected to ensure that there are no cracks or leaks. With a multi-point inspection, your dealer can inspect the hoses and advise if replacement is needed. Shocks and struts help aid in control for a smoother ride. . Signs of wear may include steering wheel vibration, bounce/ sway while braking, longer stopping distance, or uneven tire wear. . As part of the multi-point inspection, trained dealer technicians can visually inspect the shocks and struts for signs of leaking, blown seals, or damage, and can advise when service is needed. Lamps Properly working headlamps, taillamps, and brake lamps are important to see and be seen on the road. . Signs that the headlamps need attention include dimming, failure to light, cracking, or damage. The brake lamps need to be checked periodically to ensure that they light when braking. . With a multi-point inspection, your dealer can check the lamps and note any concerns. Tires Tires need to be properly inflated, rotated, and balanced. Maintaining the tires can save money and fuel, and can reduce the risk of tire failure. . Signs that the tires need to be replaced include three or more visible treadwear indicators; cord or fabric showing through the 335 rubber; cracks or cuts in the tread or sidewall; or a bulge or split in the tire. . Trained dealer technicians can inspect and recommend the right tires. Your dealer can also provide tire/wheel balancing services to ensure smooth vehicle operation at all speeds. Your dealer sells and services name brand tires. Vehicle Care To help keep the vehicle looking like new, vehicle care products are available from your dealer. For information on how to clean and protect the vehicle’s interior and exterior, see Interior Care 0 321 and Exterior Care 0 317. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 336 Service and Maintenance Wheel Alignment Windshield Wiper Blades Wheel alignment is critical for ensuring that the tires deliver optimal wear and performance. . Signs that the alignment may need to be adjusted include pulling, improper vehicle handling, or unusual tire wear. . Your dealer has the required equipment to ensure proper wheel alignment. For safety, appearance, and the best viewing, keep the windshield clean and clear. . Signs of damage include scratches, cracks, and chips. . Trained dealer technicians can inspect the windshield and recommend proper replacement if needed. Wiper blades need to be cleaned and kept in good condition to provide a clear view. . Signs of wear include streaking, skipping across the windshield, and worn or split rubber. . Trained dealer technicians can check the wiper blades and replace them when needed. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Service and Maintenance 337 Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants Usage Automatic Transmission Engine Coolant Engine Oil Hood Latch Assembly, Secondary Latch, Pivots, Spring Anchor, and Release Pawl Hydraulic Brake System Key Lock Cylinders, Hood and Door Hinges Weatherstrip Conditioning Windshield Washer Fluid/Lubricant DEXRON-VI Automatic Transmission Fluid. 50/50 mixture of clean, drinkable water and use only DEX-COOL Coolant. See Cooling System 0 258. Engine oil meeting the dexos1 specification of the proper SAE viscosity grade. ACDelco dexos1 full synthetic is recommended. See Engine Oil 0 253. Lubriplate Lubricant Aerosol (GM Part No. 89021668, in Canada 89021674) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. DOT 3 Hydraulic Brake Fluid (GM Part No. 19353126, in Canada 19353127). Multi-Purpose Lubricant, Superlube (GM Part No. 12346241, in Canada 10953474). Weatherstrip lubricant (GM Part No. 3634770, in Canada 10953518) or equivalent. Automotive windshield washer fluid that meets regional freeze protection requirements. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 338 Service and Maintenance Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your dealer. Part Engine Air Cleaner/Filter GM Part Number ACDelco Part Number 23321606 A3212C Engine Oil Filter 19330000 PF63E Passenger Compartment Air Filter 13508023 CF179C Spark Plugs 12622561 41-109 Front Driver – 60 cm (23.6 in) 84580856 — Front Passenger – 50 cm (19.7 in) 84580859 — Rear – 27.5 cm (10.8 in) 84177374 — Wiper Blades Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Service and Maintenance 339 Maintenance Records After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts. Date Odometer Reading Serviced By Services Performed Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 340 Technical Data Technical Data Vehicle Identification Vehicle Identification Vehicle Identification Number (VIN) Vehicle Identification Number (VIN) . . . . . . . . . . . . . . . 340 Service Parts Identification . . . 340 Vehicle Data Capacities and Specifications . . . . . . . . . . . . . . . 341 Engine Drive Belt Routing . . . . 343 This legal identifier is in the front corner of the instrument panel, on the driver side of the vehicle. It can be seen through the windshield from outside. The Vehicle Identification Number (VIN) also appears on the Vehicle Certification and Service Parts labels and certificates of title and registration. Engine Identification The eighth character in the VIN is the engine code. This code identifies the vehicle's engine, specifications, and replacement parts. See “Engine Specifications” under Capacities and Specifications 0 341 for the vehicle's engine code. Service Parts Identification There may be a large barcode on the certification label on the center pillar that you can scan for the following information: . Vehicle Identification Number (VIN) . Model designation . Paint information . Production options If there is not a large barcode on this label, then you will find this same information on a label under the hatch area on the passenger side. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Technical Data 341 Vehicle Data Capacities and Specifications The following approximate capacities are given in metric and English conversions. See Recommended Fluids and Lubricants 0 337 for more information. Capacities Application Air Conditioning Refrigerant Metric English For the air conditioning system refrigerant type and charge amount, see the refrigerant label under the hood. See your dealer for more information. Engine Cooling System* Without V92 Towing Package 14.6 L 15.4 qt With V92 Towing Package 16.7 L 17.6 qt 5.7 L 6.0 qt Front-Wheel Drive 73.4 L 19.4 gal All-Wheel Drive 82.1 L 21.7 gal 190 Y 140 lb ft Engine Oil with Filter Fuel Tank Wheel Nut Torque All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid level after filling. *Engine cooling system capacity values are based on the entire cooling system and its components. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 342 Technical Data Engine Specifications Engine 3.6L V6 Engine (LFY) VIN Code Transmission Spark Plug Gap W Automatic 0.95–1.10 mm (0.037– 0.043 in) Spark plug gaps are preset by the manufacturer. Re-gapping the spark plug is not recommended and can damage the spark plug. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Technical Data Engine Drive Belt Routing 343 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 344 Customer Information Customer Information Customer Information Customer Satisfaction Procedure . . . . . . . . . . . . . . . . . . . 344 Customer Assistance Offices . . . . . . . . . . . . . . . . . . . . . . 346 Customer Assistance for Text Telephone (TTY) Users . . . . . 347 Online Owner Center . . . . . . . . . 347 GM Mobility Reimbursement Program . . . . . . . . . . . . . . . . . . . . 347 Roadside Assistance Program . . . . . . . . . . . . . . . . . . . . 348 Scheduling Service Appointments . . . . . . . . . . . . . . . 349 Courtesy Transportation Program . . . . . . . . . . . . . . . . . . . . 350 Collision Damage Repair . . . . . 351 Publication Ordering Information . . . . . . . . . . . . . . . . . . 353 Radio Frequency Statement . . . . . . . . . . . . . . . . . . . 354 Reporting Safety Defects Reporting Safety Defects to the United States Government . . . . . . . . . . . . . . . . . 354 Reporting Safety Defects to the Canadian Government . . . . . . . . . . . . . . . . . 355 Reporting Safety Defects to General Motors . . . . . . . . . . . . . 355 Vehicle Data Recording and Privacy Vehicle Data Recording and Privacy . . . . . . . . . . . . . . . . . . . . . . 355 Cybersecurity . . . . . . . . . . . . . . . . . 356 Event Data Recorders . . . . . . . . 356 OnStar . . . . . . . . . . . . . . . . . . . . . . . 357 Infotainment System . . . . . . . . . . 357 Customer Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Buick. Normally, any concerns with the sales transaction or the operation of the vehicle will be resolved by your dealer's sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur. If your concern has not been resolved to your satisfaction, the following steps should be taken: STEP ONE : Discuss your concern with a member of dealership management. Normally, concerns can be quickly resolved at that level. If the matter has already been reviewed with the sales, service, or parts manager, contact the owner of your dealership or the general manager. STEP TWO : If after contacting a member of dealership management, it appears your concern cannot be Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Customer Information resolved by your dealership without further help, in the U.S., call 1-800-521-7300. In Canada, contact General Motors of Canada Customer Care Centre at 1-800-263-3777 (English) or 1-800-263-7854 (French). We encourage you to call the toll-free number in order to give the inquiry prompt attention. Have the following information available to give the Customer Assistance representative: . Vehicle Identification Number (VIN). This is available from the vehicle registration or title, or the plate at the top left of the instrument panel and visible through the windshield. . Dealership name and location. . Vehicle delivery date and present mileage. When contacting Buick, remember that your concern will likely be resolved at a dealer's facility. That is why we suggest following Step One first. STEP THREE — U.S. Owners : Both General Motors and your dealer are committed to making sure you are completely satisfied with the new vehicle. However, if you continue to remain unsatisfied after following the procedure outlined in Steps One and Two, you can file with the Better Business Bureau (BBB) Auto Line® Program to enforce your rights. The BBB Auto Line Program is an out-of-court program administered by the Council of Better Business Bureaus to settle automotive disputes regarding vehicle repairs or the interpretation of the New Vehicle Limited Warranty. Although you may be required to resort to this informal dispute resolution program prior to filing a court action, use of the program is free of charge and your case will generally be heard within 40 days. If you do not agree with the decision given in your case, you may reject it and proceed with any other venue for relief available to you. 345 You may contact the BBB Auto Line Program using the toll-free telephone number or write them at the following address: BBB Auto Line Program Council of Better Business Bureaus, Inc. 3033 Wilson Boulevard Suite 600 Arlington, VA 22201 Telephone: 1-800-955-5100 http://www.bbb.org/council/ programs-services/ dispute-handling-and-resolution/ bbb-auto-line This program is available in all 50 states and the District of Columbia. Eligibility is limited by vehicle age, mileage, and other factors. General Motors reserves the right to change eligibility limitations and/or discontinue its participation in this program. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 346 Customer Information STEP THREE — Canadian Owners : In the event that you do not feel your concerns have been addressed after following the procedure outlined in Steps One and Two, General Motors of Canada Company wants you to be aware of its participation in a no-charge Mediation/Arbitration program. General Motors of Canada Company has committed to binding arbitration of owner disputes involving factory-related vehicle service claims. The program provides for the review of the facts involved by an impartial third party arbiter, and may include an informal hearing before the arbiter. The program is designed so that the entire dispute settlement process, from the time you file your complaint to the final decision, should be completed in about 70 days. We believe our impartial program offers advantages over courts in most jurisdictions because it is informal, quick, and free of charge. For further information concerning eligibility in the Canadian Motor Vehicle Arbitration Plan (CAMVAP), call toll-free 1-800-207-0685, or call the General Motors Customer Care Centre, 1-800-263-3777 (English), 1-800-263-7854 (French), or write to: Mediation/Arbitration Program c/o Customer Care Centre General Motors of Canada Company Mail Code: CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 The inquiry should be accompanied by the Vehicle Identification Number (VIN). Customer Assistance Offices Buick encourages customers to call the toll-free number for assistance. However, if a customer wishes to write or e-mail Buick, the letter should be addressed to: United States and Puerto Rico Buick Customer Assistance Center P.O. Box 33136 Detroit, MI 48232-5136 www.Buick.com 1-800-521-7300 1-800-832-8425 (For Text Telephone devices (TTYs)) Roadside Assistance: 1-800-252-1112 From U.S. Virgin Islands: 1-800-496-9994 Canada General Motors of Canada Company Customer Care Centre, Mail Code: CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 www.gm.ca 1-800-263-3777 (English) 1-800-263-7854 (French) 1-800-263-3830 (For Text Telephone devices (TTYs)) Roadside Assistance: 1-800-268-6800 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Customer Information All Overseas Locations Membership Benefits Please contact the local General Motors Business Unit. E : Download owner’s manuals and view vehicle-specific how-to videos. Customer Assistance for Text Telephone (TTY) Users G : View maintenance schedules, To assist customers who are deaf, hard of hearing, or speech-impaired and who use Text Telephones (TTYs), Buick has TTY equipment available at its Customer Assistance Center. Any TTY user can communicate with Buick by dialing: 1-800-832-8425. TTY users in Canada can dial 1-800-263-3830. I : View and print dealer-recorded Online Owner Center Online Owner Experience (U.S.) my.buick.com The Buick online owner experience allows access to videos, articles, and vehicle health specific to your Buick as well as your OnStar Account information all in one place. alerts, and Vehicle Diagnostic Information. Schedule service appointments. service records and self-recorded service records. D : Select a dealer and view 347 See my.buick.com to register your vehicle. Buick Owner Centre (Canada) mybuick.ca Visit the Buick Owner Centre at mybuick.ca (English) or my.buick.ca (French) to access similar benefits to the U.S. site. GM Mobility Reimbursement Program locations, maps, phone numbers, and hours. r : Track your vehicle’s warranty information. J : View active recalls by Vehicle Identification Number (VIN). See Vehicle Identification Number (VIN) 0 340. H : Compare and shop for Buick and OnStar plans and services. View GM Card and SiriusXM information (if equipped). F : Chat with online help representatives. This program is available to qualified applicants for cost reimbursement, up to certain limits, of eligible aftermarket adaptive equipment required for the vehicle, such as hand controls or a wheelchair/scooter lift for the vehicle. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 348 Customer Information To learn about the GM Mobility program, see www.gmmobility.com or call the GM Mobility Assistance Center at 1-800-323-9935. Text Telephone (TTY) users, call 1-800-833-9935. . Your name, home address, and home telephone number . Telephone number of your location . Location of the vehicle General Motors of Canada also has a Mobility program. See www.gm.ca or call 1-800-GM-DRIVE (800-463-7483) for details. TTY users call 1-800-263-3830. . Model, year, color, and license plate number of the vehicle . Odometer reading, Vehicle Identification Number (VIN), and delivery date of the vehicle Roadside Assistance Program . For U.S.-purchased vehicles, call 1-800-252-1112; (Text Telephone (TTY): 1-888-889-2438). Services are provided for the duration of the vehicle’s powertrain warranty. For Canadian-purchased vehicles, call 1-800-268-6800. In the U.S., anyone driving the vehicle is covered. In Canada, a person driving the vehicle without permission from the owner is not covered. Service is available 24 hours a day, 365 days a year. Calling for Assistance When calling Roadside Assistance, have the following information ready: Description of the problem changes or discontinue the Roadside Assistance program at any time without notification. General Motors North America and Buick reserve the right to limit services or payment to an owner or driver if they decide the claims are made too often, or the same type of claim is made many times. Services Provided . Emergency Fuel Delivery: Delivery of enough fuel for the vehicle to get to the nearest service station. . Lock-Out Service: Service to unlock the vehicle if you are locked out. A remote unlock may be available if you have OnStar. For security reasons, the driver must present identification before this service is given. . Emergency Tow from a Public Road or Highway: Tow to the nearest Buick dealer for warranty service, or if the vehicle was in a crash and cannot be Coverage Roadside Assistance is not a part of the New Vehicle Limited Warranty. General Motors North America and Buick reserve the right to make any Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Customer Information driven. Assistance is not given when the vehicle is stuck in sand, mud, or snow. . Flat Tire Change: Service to change a flat tire with the spare tire. The spare tire, if equipped, must be in good condition and properly inflated. It is the owner's responsibility for the repair or replacement of the tire if it is not covered by the warranty. . Battery Jump Start: Service to jump start a dead battery. . Trip Interruption Benefits and Assistance: If your trip is interrupted due to a warranty event, incidental expenses may be reimbursed within the Powertrain warranty period. Items considered are reasonable and customary hotel, meals, rental car, or a vehicle being delivered back to the customer, up to 500 miles. Services Not Included in Roadside Assistance . Impound towing caused by violation of any laws. . Legal fines. . Mounting, dismounting, or changing of snow tires, chains, or other traction devices. Service is not provided if a vehicle is in an area that is not accessible to the service vehicle or is not a regularly traveled or maintained public road, which includes ice and winter roads. Off-road use is not covered. Services Specific to Canadian-Purchased Vehicles . Fuel Delivery: Reimbursement is up to 7 liters. Diesel fuel delivery may be restricted. Propane and other fuels are not provided through this service. . Lock-Out Service: Vehicle registration is required. . Trip Interruption Benefits and Assistance: Must be over 150 km from where your trip was started to qualify. Pre-authorization, original detailed receipts, and a copy of the repair orders are required. 349 Once authorization has been received, the Roadside Assistance advisor will help you make arrangements and explain how to receive payment. . Alternative Service: If assistance cannot be provided right away, the Roadside Assistance advisor may give permission to get local emergency road service. You will receive payment, up to $100, after sending the original receipt to Roadside Assistance. Mechanical failures may be covered, however any cost for parts and labor for repairs not covered by the warranty are the owner responsibility. Scheduling Service Appointments When the vehicle requires warranty service, contact your dealer and request an appointment. By scheduling a service appointment and advising the service consultant Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 350 Customer Information of your transportation needs, your dealer can help minimize your inconvenience. extended powertrain, and/or hybrid-specific warranties in both the U.S. and Canada. If the vehicle cannot be scheduled into the service department immediately, keep driving it until it can be scheduled for service, unless, of course, the problem is safety related. If it is, please call your dealership, let them know this, and ask for instructions. Several Courtesy Transportation options are available to assist in reducing inconvenience when warranty repairs are required. If your dealer requests you to bring the vehicle for service, you are urged to do so as early in the work day as possible to allow for same-day repair. Courtesy Transportation Program To enhance your ownership experience, we and our participating dealers are proud to offer Courtesy Transportation, a customer support program for vehicles with the Bumper-to-Bumper (Base Warranty Coverage period in Canada), Courtesy Transportation is not a part of the New Vehicle Limited Warranty. A separate booklet entitled “Limited Warranty and Owner Assistance Information” furnished with each new vehicle provides detailed warranty coverage information. Transportation Options Warranty service can generally be completed while you wait. However, if you are unable to do so, your dealer may offer the following transportation options: Shuttle Service This includes one-way or round-trip shuttle service within reasonable time and distance parameters of your dealer's area. Public Transportation or Fuel Reimbursement If overnight warranty repairs are needed, and public transportation is used, the expense must be supported by original receipts and within the maximum amount allowed by GM. If U.S. customers arrange their own transportation, limited reimbursement for reasonable fuel expenses may be available. Claim amounts should reflect actual costs and be supported by original receipts. See your dealer for information. Courtesy Rental Vehicle For an overnight warranty repair, the dealer may provide an available courtesy rental vehicle or provide for reimbursement of a rental vehicle. Reimbursement is limited and must be supported by original receipts as well as a signed and completed rental agreement and meet state/ provincial, local, and rental vehicle provider requirements. Requirements vary and may include minimum age requirements, insurance coverage, credit card, etc. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Customer Information Additional fees such as fuel, rental vehicle insurance, taxes, levies, usage fees, excessive mileage, or rental usage beyond the completion of the repair are also your responsibility. It may not be possible to provide a like vehicle as a courtesy rental. Additional Program Information All program options, such as shuttle service, may not be available at every dealer. Contact your dealer for specific availability. General Motors reserves the right to unilaterally modify, change, or discontinue Courtesy Transportation at any time and to resolve all questions of claim eligibility pursuant to the terms and conditions described herein at its sole discretion. Collision Damage Repair If the vehicle is involved in a collision and it is damaged, have the damage repaired by a qualified technician using the proper equipment and quality replacement parts. Poorly performed collision repairs diminish the vehicle resale value, and safety performance can be compromised in subsequent collisions. Collision Parts Genuine GM Collision parts are new parts made with the same materials and construction methods as the parts with which the vehicle was originally built. Genuine GM Collision parts are the best choice to ensure that the vehicle's designed appearance, durability, and safety are preserved. The use of Genuine GM parts can help maintain the GM New Vehicle Limited Warranty. Recycled original equipment parts may also be used for repair. These parts are typically removed from vehicles that were total losses in prior crashes. In most cases, the parts being recycled are from undamaged sections of the vehicle. A recycled original equipment GM part may be an acceptable choice to 351 maintain the vehicle's originally designed appearance and safety performance; however, the history of these parts is not known. Such parts are not covered by the GM New Vehicle Limited Warranty, and any related failures are not covered by that warranty. Aftermarket collision parts are also available. These are made by companies other than GM and may not have been tested for the vehicle. As a result, these parts may fit poorly, exhibit premature durability/ corrosion problems, and may not perform properly in subsequent collisions. Aftermarket parts are not covered by the GM New Vehicle Limited Warranty, and any vehicle failure related to such parts is not covered by that warranty. Repair Facility GM also recommends that you choose a collision repair facility that meets your needs before you ever need collision repairs. Your dealer may have a collision repair center with GM-trained technicians and Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 352 Customer Information state-of-the-art equipment, or be able to recommend a collision repair center that has GM-trained technicians and comparable equipment. Insuring the Vehicle Protect your investment in the GM vehicle with comprehensive and collision insurance coverage. There are significant differences in the quality of coverage afforded by various insurance policy terms. Many insurance policies provide reduced protection to the GM vehicle by limiting compensation for damage repairs through the use of aftermarket collision parts. Some insurance companies will not specify aftermarket collision parts. When purchasing insurance, we recommend that you ensure that the vehicle will be repaired with GM original equipment collision parts. If such insurance coverage is not available from your current insurance carrier, consider switching to another insurance carrier. If the vehicle is leased, the leasing company may require you to have insurance that ensures repairs with Genuine GM Original Equipment Manufacturer (OEM) parts or Genuine Manufacturer replacement parts. Read the lease carefully, as you may be charged at the end of the lease for poor quality repairs. If a Crash Occurs . Driver license number . Owner name, address, and telephone number . Vehicle license plate number . Vehicle make, model, and model year . Vehicle Identification Number (VIN) . Insurance company and policy number . General description of the damage to the other vehicle If there has been an injury, call emergency services for help. Do not leave the scene of a crash until all matters have been taken care of. Move the vehicle only if its position puts you in danger, or you are instructed to move it by a police officer. Choose a reputable repair facility that uses quality replacement parts. See “Collision Parts” earlier in this section. Give only the necessary information to police and other parties involved in the crash. If the airbag has inflated, see What Will You See after an Airbag Inflates? 0 67. For emergency towing see Roadside Assistance Program 0 348. Managing the Vehicle Damage Repair Process Gather the following information: . Driver name, address, and telephone number In the event that the vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Customer Information 353 repair facility of choice, take the vehicle there, or have it towed there. Specify to the facility that any required replacement collision parts be original equipment parts, either new Genuine GM parts or recycled original GM parts. Remember, recycled parts will not be covered by the GM vehicle warranty. In such cases, you can have control of the repair and parts choices as long as the cost stays within reasonable limits. portfolios. Portfolios include an owner’s manual, warranty manual, infotainment manual, if applicable, and zip lock bag or pouch. Publication Ordering Information Current and Past Models Insurance pays the bill for the repair, but you must live with the repair. Depending on your policy limits, your insurance company may initially value the repair using aftermarket parts. Discuss this with the repair professional, and insist on Genuine GM parts. Remember, if the vehicle is leased, you may be obligated to have the vehicle repaired with Genuine GM parts, even if your insurance coverage does not pay the full cost. Service manuals have the diagnosis and repair information on the engine, transmission, axle, suspension, brakes, electrical system, steering system, body, etc. If another party's insurance company is paying for the repairs, you are not obligated to accept a repair valuation based on that insurance company's collision policy repair limits, as you have no contractual limits with that company. Service Manuals Customer Literature Owner’s manuals are written specifically for owners and are intended to provide basic operational information about the vehicle. The owner’s manual includes the Maintenance Schedule for all models. Customer literature publications available for purchase include owner’s manuals, warranty manuals, infotainment manuals, and Service manuals and customer literature are available for many current and past model year GM vehicles. To order, call 1-800-551-4123 Monday–Friday, 8:00 a.m.–6:00 p.m. eastern time For credit card orders only (VISA, MasterCard, or Discover), see Helm, Inc. at: www.helminc.com. To order by mail, write to: Helm, Incorporated Attention: Customer Service 47911 Halyard Drive Plymouth, MI 48170 Make checks payable in U.S. funds. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 354 Customer Information Radio Frequency Statement This vehicle has systems that operate on a radio frequency that complies with Part 15/Part 18 of the Federal Communications Commission (FCC) rules and with Innovation, Science and Economic Development (ISED) Canada's RSP-100 / ICES-GEN. Operation is subject to the following two conditions: 1. The device may not cause harmful interference. 2. The device must accept any interference received, including interference that may cause undesired operation of the device. Changes or modifications to any of these systems by other than an authorized service facility could void authorization to use this equipment. Reporting Safety Defects Reporting Safety Defects to the United States Government If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying General Motors. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or General Motors. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator, NHTSA 1200 New Jersey Avenue, S.E. Washington, D.C. 20590 You can also obtain other information about motor vehicle safety from http://www.safercar.gov. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Customer Information Reporting Safety Defects to the Canadian Government If you live in Canada, and you believe that the vehicle has a safety defect, notify Transport Canada immediately, and notify General Motors of Canada Company. Call Transport Canada at 1-800-333-0510; go to: www.tc.gc.ca/recalls (English) www.tc.gc.ca/rappels (French) or write to: Transport Canada Motor Vehicle Safety Directorate Defect Investigations and Recalls Division 80 Noel Street Gatineau, QC J8Z 0A1 Reporting Safety Defects to General Motors In addition to notifying NHTSA (or Transport Canada) in a situation like this, notify General Motors. In the U.S., call 1-800-521-7300, or write: Buick Customer Assistance Center P.O. Box 33136 Detroit, MI 48232–5136 In Canada, call 1-800-263-3777 (English) or 1-800-263-7854 (French), or write: General Motors of Canada Company Customer Care Centre, Mail Code: CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 In Mexico, call 01-800-200-28425 or 01-800-466-0818. In other Central America and Caribbean Countries, call 52-722-236-0680. 355 Vehicle Data Recording and Privacy The vehicle has a number of computers that record information about the vehicle’s performance and how it is driven or used. For example, the vehicle uses computer modules to monitor and control engine and transmission performance, to monitor the conditions for airbag deployment and deploy them in a crash, and, if equipped, to provide antilock braking to help the driver control the vehicle. These modules may store data to help the dealer technician service the vehicle or to help GM improve safety or features. Some modules may also store data about how the vehicle is operated, such as rate of fuel consumption or average speed. These modules may retain personal preferences, such as radio presets, seat positions, and temperature settings. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 356 Customer Information Cybersecurity GM collects information about the use of your vehicle including operational and safety related information. We collect this information to provide, evaluate, improve, and troubleshoot our products and services and to develop new products and services. The protection of vehicle electronics systems and customer data from unauthorized outside electronic access or control is important to GM. GM maintains appropriate security standards, practices, guidelines and controls aimed at defending the vehicle and the vehicle service ecosystem against unauthorized electronic access, detecting possible malicious activity in related networks, and responding to suspected cybersecurity incidents in a timely, coordinated and effective manner. Security incidents could impact your safety or compromise your private data. To minimize security risks, please do not connect your vehicle electronic systems to unauthorized devices or connect your vehicle to any unknown or untrusted networks (such as Bluetooth, WIFI or similar technology). In the event you suspect any security incident impacting your data or the safe operation of your vehicle, please stop operating your vehicle and contact your dealer. Event Data Recorders This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: . How various systems in your vehicle were operating; . Whether or not the driver and passenger safety belts were buckled/fastened; . How far (if at all) the driver was depressing the accelerator and/ or brake pedal; and, . How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur. Note EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Customer Information To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. GM will not access these data or share it with others except: with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee; in response to an official request by police or similar government office; as part of GM's defense of litigation through the discovery process; or, as required by law. Data that GM collects or receives may also be used for GM research needs or may be made available to others for research purposes, where a need is shown and the data is not tied to a specific vehicle or vehicle owner. OnStar If the vehicle is equipped with OnStar and has an active service plan, additional data may be collected and transmitted through the OnStar system. This includes information about the vehicle’s operation; collisions involving the vehicle; the use of the vehicle and its features, including infotainment; and the location and approximate GPS speed of the vehicle. Refer to the OnStar Terms and Conditions and Privacy Statement on the OnStar website. See OnStar Additional Information 0 360. Infotainment System If the vehicle is equipped with a navigation system as part of the infotainment system, use of the system may result in the storage of destinations, addresses, telephone numbers, and other trip information. See the infotainment manual for information on stored data and for deletion instructions. 357 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 358 OnStar OnStar OnStar Overview OnStar Overview OnStar Overview . . . . . . . . . . . . . 358 OnStar Services Emergency . . . . . . . . . . . . . . . . . . . 359 Security . . . . . . . . . . . . . . . . . . . . . . 360 OnStar Additional Information OnStar Additional Information . . . . . . . . . . . . . . . . . . 360 = Voice Command Button Q Blue OnStar Button > Red Emergency Button This vehicle may be equipped with a comprehensive, in-vehicle system that can connect to an OnStar Advisor for Emergency, Security, Navigation, Connections, and Diagnostics Services. OnStar services may require a paid service plan and data plan. OnStar requires the vehicle battery and electrical system, cellular service, and GPS satellite signals to be available and operating. OnStar acts as a link to existing emergency service providers. OnStar may collect information about you and your vehicle, including location information. See OnStar User Terms, Privacy Statement, and Software Terms for more details including system limitations at www.onstar.com (U.S.) or www.onstar.ca (Canada). The OnStar system status light is next to the OnStar buttons. If the status light is: . Solid Green: System is ready. . Flashing Green: On a call. . Red: Indicates a problem. . Off: System is off. Press Q twice to speak with an OnStar Advisor. Press Q or call 1-888-4ONSTAR (1-888-466-7827) to speak to an Advisor. Functionality of the Voice Command button may vary by vehicle and region. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 OnStar Press . = to: Open the OnStar app on the infotainment display. See the infotainment manual for information on how to use the OnStar app. . Receive a Diagnostic check of the vehicle's key operating systems. . Receive Roadside Assistance. . Manage Wi-Fi Settings, if equipped. Or . Give OnStar Turn-by-Turn Navigation voice commands. . Obtain and customize the Wi-Fi hotspot name or SSID and password, if equipped. Press > to get a priority connection to an OnStar Advisor available 24/7 to: . Get help for an emergency. . Be a Good Samaritan or respond to an AMBER Alert. Press Q to connect to an Advisor to: . Verify account information or update contact information. . Get driving directions. . Get assistance in severe weather or other crisis situations and find evacuation routes. 359 OnStar Services Emergency Emergency Services require an active safety and security plan. With Automatic Crash Response, built-in sensors can automatically alert a specially trained OnStar Advisor who is immediately connected in to the vehicle to help. Press > for a priority connection to an OnStar Advisor who can contact emergency service providers, direct them to your exact location, and relay important information. With OnStar Crisis Assist, specially trained Advisors are available 24 hours a day, 7 days a week, to provide a central point of contact, assistance, and information during a crisis. With Roadside Assistance, Advisors can locate a nearby service provider to help with a flat tire, a battery jump, or an empty gas tank. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 360 OnStar Security If equipped, OnStar provides these services: . With Stolen Vehicle Assistance, OnStar Advisors can use GPS to pinpoint the vehicle and help authorities quickly recover it. . With Remote Ignition Block, if equipped, OnStar can block the engine from being restarted. . With Stolen Vehicle Slowdown, if equipped, OnStar can work with law enforcement to gradually slow the vehicle down. Theft Alarm Notification If equipped, if the doors are locked and the vehicle alarm sounds, a notification by text, e-mail, or phone call will be sent. If the vehicle is stolen, an OnStar Advisor can work with authorities to recover the vehicle. OnStar Additional Information In-Vehicle Audio Messages Audio messages may play important information at the following times: . Prior to vehicle purchase. Press Q to set up an account. . After change in ownership and at 90 days. Transferring Service Press Q to request account transfer eligibility information. The Advisor can cancel or change account information. Selling/Transferring the Vehicle Call 1-888-4ONSTAR (1-888-466-7827) immediately to terminate your OnStar or connected services if the vehicle is disposed of, sold, transferred, or if the lease ends. Reactivation for Subsequent Owners Press Q and follow the prompts to speak to an Advisor as soon as possible. The Advisor will update vehicle records and explain OnStar or connected service options. How OnStar Service Works Automatic Crash Response, Emergency Services, Crisis Assist, Stolen Vehicle Assistance, Remote Services, and Roadside Assistance are available on most vehicles. Not all OnStar services are available everywhere or on all vehicles. For more information, a full description of OnStar services, system limitations, and OnStar User Terms, Privacy Statement, and Software Terms: . Call 1-888-4ONSTAR (1-888-466-7827). . See www.onstar.com (U.S.). . See www.onstar.ca (Canada). . Call TTY 1-877-248-2080. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 OnStar . Press Q to speak with an Advisor. OnStar or connected services cannot work unless the vehicle is in a place where OnStar has an agreement with a wireless service provider for service in that area. The wireless service provider must also have coverage, network capacity, reception, and technology compatible with OnStar or connected services. Service involving location information about the vehicle cannot work unless GPS signals are available, unobstructed, and compatible with the OnStar hardware. OnStar or connected services may not work if the OnStar equipment is not properly installed or it has not been properly maintained. If equipment or software is added, connected, or modified, OnStar or connected services may not work. Other problems beyond the control of OnStar — such as hills, tall buildings, tunnels, weather, electrical system design and architecture of the vehicle, damage 361 to the vehicle in a crash, or wireless phone network congestion or jamming — may prevent service. access to all OnStar services, except Virtual Advisor and OnStar Turn-by-Turn Navigation. See Radio Frequency Statement 0 354. If equipped, TTY mode can be turned on or off by touching Settings, then Apps, and then Phone. When TTY mode is on, phone calls can be made or received with OnStar using the infotainment display. Services for People with Disabilities Advisors provide services to help with physical disabilities and medical conditions. Press Q to help: . Locate a gas station with an attendant to pump gas. . Find a hotel, restaurant, etc., that meets accessibility needs. . Provide directions to the closest hospital or pharmacy in urgent situations. TTY Users OnStar has the ability to communicate to deaf, hard-of-hearing, or speech-impaired customers while in the vehicle. The available dealer-installed TTY system can provide in-vehicle OnStar Personal Identification Number (PIN) A PIN is needed to access some OnStar services. The PIN will need to be changed the first time when speaking with an Advisor. To change the OnStar PIN, contact an OnStar Advisor by pressing Q or calling 1-888-4ONSTAR. Warranty OnStar equipment may be warranted as part of the vehicle warranty. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 362 OnStar Languages The vehicle can be programmed to respond in multiple languages. Press Q and ask for an Advisor. Advisors are available in English, Spanish, and French. Available languages may vary by country. Potential Issues OnStar cannot perform Remote Door Unlock or Stolen Vehicle Assistance after the vehicle has been off continuously for 10 days without an ignition cycle. If the vehicle has not been started for 10 days, OnStar can contact Roadside Assistance or a locksmith to help gain access to the vehicle. Global Positioning System (GPS) . Obstruction of the GPS can occur in a large city with tall buildings; in parking garages; around airports; in tunnels and underpasses; or in an area with very dense trees. If GPS signals are not available, the OnStar system should still operate to . call OnStar. However, OnStar could have difficulty identifying the exact location. may come on. Press Q to try the call again or try again after driving a few miles into another cellular area. In emergency situations, OnStar can use the last stored GPS location to send to emergency responders. Vehicle and Power Issues A temporary loss of GPS can cause loss of the ability to send a Turn-by-Turn Navigation route. The Advisor may give a verbal route or may ask for a call back after the vehicle is driven into an open area. Cellular and GPS Antennas Cellular reception is required for OnStar to send remote signals to the vehicle. Do not place items over or near the antenna to prevent blocking cellular and GPS signal reception. Unable to Connect to OnStar Message If there is limited cellular coverage or the cellular network has reached maximum capacity, this message OnStar services require a vehicle electrical system, wireless service, and GPS satellite technologies to be available and operating for features to function properly. These systems may not operate if the battery is discharged or disconnected. Add-on Electrical Equipment The OnStar system is integrated into the electrical architecture of the vehicle. Do not add any electrical equipment. See Add-On Electrical Equipment 0 246. Added electrical equipment may interfere with the operation of the OnStar system and cause it to not operate. Vehicle Software Updates OnStar or GM may remotely deliver software updates or changes to the vehicle without further notice or consent. These updates or changes may enhance or maintain safety, Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 OnStar security, or the operation of the vehicle or the vehicle systems. Software updates or changes may affect or erase data or settings that are stored in the vehicle, such as saved navigation destinations or pre-set radio stations. Neither OnStar nor GM is responsible for any affected or erased data or settings. These updates or changes may also collect personal information. Such collection is described in the OnStar privacy statement or separately disclosed at the time of installation. These updates or changes may also cause a system to automatically communicate with GM servers to collect information about vehicle system status, identify whether updates or changes are available, or deliver updates or changes. An active OnStar agreement constitutes consent to these software updates or changes and agreement that either OnStar or GM may remotely deliver them to the vehicle. 363 Privacy libcurl: The complete OnStar Privacy Statement may be found at www.onstar.com (U.S.), or www.onstar.ca (Canada). We recommend that you review it. If you have any questions, call 1-888-4ONSTAR (1-888-466-7827) or press Q to speak with an Advisor. Users of wireless communications are cautioned that the privacy of any information sent via wireless cellular communications cannot be assured. Third parties may unlawfully intercept or access transmissions and private communications without consent. COPYRIGHT AND PERMISSION NOTICE OnStar - Software Acknowledgements Certain OnStar components include libcurl and unzip software and other third party software. Below are the notices and licenses associated with libcurl and unzip and for other third party software please see http://opensource.lge.com/index www.onstar.com/us/en/ Copyright (c) 1996 - 2010, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED “AS IS,” WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 364 OnStar OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. unzip: This is version 2005-Feb-10 of the Info-ZIP copyright and license. The definitive version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/ license.html indefinitely. Copyright (c) 1990-2005 Info-ZIP. All rights reserved. For the purposes of this copyright and license, “Info-ZIP” is defined as the following set of individuals: Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Steven M. Schweda, Christian Spieler, Cosmin Truta, Antoine Verheijen, Paul von Behren, Rich Wales, Mike White. This software is provided “as is,” without warranty of any kind, express or implied. In no event shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special or consequential damages arising out of the use of or inability to use this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. Redistributions of source code must retain the above copyright notice, definition, disclaimer, and this list of conditions. 2. Redistributions in binary form (compiled executables) must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution. The sole exception to this condition is redistribution of a standard UnZipSFX binary (including SFXWiz) as part of a self-extracting archive; that is permitted without inclusion of this license, as long as the normal SFX banner has not been removed from the binary or disabled. 3. Altered versions–including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, and dynamic, shared, or static library versions–must be plainly marked as such and must not Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 OnStar be misrepresented as being the original source. Such altered versions also must not be misrepresented as being Info-ZIP releases–including, but not limited to, labeling of the altered versions with the names “Info-ZIP” (or any variation thereof, including, but not limited to, different capitalizations), “Pocket UnZip,” “WiZ” or “MacZip” without the explicit permission of Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s). 4. Info-ZIP retains the right to use the names “Info-ZIP,” “Zip,” “UnZip,” “UnZipSFX,” “WiZ,” “Pocket UnZip,” “Pocket Zip,” and “MacZip” for its own source and binary releases. 365 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 366 Connected Services Connected Services Connected Services Navigation . . . . . . . . . . . . . . . . . . . . 366 Connections . . . . . . . . . . . . . . . . . . 367 Diagnostics . . . . . . . . . . . . . . . . . . . 368 Connected Services Navigation Navigation requires a specific OnStar or connected service plan. Press Q to receive Turn-by-Turn directions or have them sent to the vehicle’s navigation screen, if equipped. Turn-by-Turn Navigation 1. Press Q to connect to an Advisor. 2. Request directions to be downloaded to the vehicle. 3. Follow the voice-guided commands. Using Voice Commands During a Planned Route Functionality of the Voice Command button, if equipped, may vary by vehicle and region. For some vehicles, press = to open the OnStar app on the infotainment display. For other vehicles press as follows. = Cancel Route 1. Press =. System responds: “OnStar ready,” then a tone. 2. Say “Cancel route.” System responds: “Do you want to cancel directions?” 3. Say “Yes.” System responds: “OK, request completed, thank you, goodbye.” Route Preview 1. Press =. System responds: “OnStar ready,” then a tone. 2. Say “Route preview.” System responds with the next three maneuvers. Repeat 1. Press =. System responds: “OnStar ready,” then a tone. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Connected Services 2. Say “Repeat.” System responds with the last direction given, then responds with “OnStar ready,” then a tone. Get My Destination 1. Press =. System responds: “OnStar ready,” then a tone. 2. Say “Get my destination.” System responds with the address and distance to the destination, then responds with “OnStar ready,” then a tone. Send Destination to Vehicle Directions can be sent to the vehicle’s navigation screen, if equipped. Press Q, then ask the Advisor to download directions to the vehicle’s navigation system, if equipped. After the call ends, the navigation screen will provide prompts to begin driving directions. Routes that are sent to the navigation screen can only be canceled through the navigation system. See www.onstar.com (U.S.) or www.onstar.ca (Canada). Connections The following services help with staying connected. For coverage maps, see www.onstar.com (U.S.) or www.onstar.ca (Canada). Ensuring Security . Change the default passwords for the Wi-Fi hotspot and myBuick mobile application. Make these passwords different from each other and use a combination of letters, numbers, and symbols to increase the security. . Change the default name of the SSID (Service Set Identifier). This is your network’s name that is visible to other wireless devices. Choose a unique name and avoid family names or vehicle descriptions. 367 Wi-Fi Hotspot (If Equipped) The vehicle may have a built-in Wi-Fi hotspot that provides access to the Internet and web content at 4G LTE speed. Up to seven mobile devices can be connected. A data plan is required. Use the in-vehicle controls only when it is safe to do so. 1. To retrieve Wi-Fi hotspot information, press = to open the OnStar app on the infotainment display, then select Wi-Fi Hotspot. On some vehicles, touch Wi-Fi or Wi-Fi Settings on the screen. 2. The Wi-Fi settings will display the Wi-Fi hotspot name (SSID), password, and on some vehicles, the connection type (no Internet connection, 3G, 4G, 4G LTE), and signal quality (poor, good, excellent). 3. To change the SSID or password, press Q or call 1-888-4ONSTAR to connect with an Advisor. On some Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 368 Connected Services vehicles, the SSID and password can be changed in the Wi-Fi Hotspot menu. After initial set-up, your vehicle’s Wi-Fi hotspot will connect automatically to your mobile devices. Manage data usage by turning Wi-Fi on or off on your mobile device, by using the myBuick mobile app, or by contacting an OnStar Advisor. On some vehicles, Wi-Fi can also be managed from the Wi-Fi Hotspot menu. . Check the vehicle’s fuel level, oil life, or tire pressure, if factory-equipped with the Tire Pressure Monitor System. . Send destinations to the vehicle. . Locate the vehicle on a map (U.S. market only). . Turn the vehicle's Wi-Fi hotspot on/off, manage settings, and monitor data consumption, if equipped. . Locate a dealer and schedule service. . Request roadside assistance. . Set a parking reminder with pin drop, take a photo, make a note, and set a timer. MyBuick Mobile App (If Available) Download the myBuick mobile app to compatible Apple and Android smartphones. Buick users can access the following services from a smartphone: . Remotely start/stop the vehicle, if factory-equipped. . Lock/unlock doors, if equipped with automatic locks. . Activate the horn and lamps. . Connect with Buick on social media. Features are subject to change. For myBuick mobile app information and compatibility, see my.buick.com. An active OnStar or connected service plan may be required. A compatible device, factory-installed remote start, and power locks are required. Data rates apply. See www.onstar.com for details and system limitations. Remote Services Contact an OnStar Advisor to unlock the doors or sound the horn and flash the lamps. Marketplace OnStar Advisors can provide offers from restaurants and retailers on your route, help locate hotels, or book a room. These services vary by market. Diagnostics By monitoring and reporting on the vehicle’s key systems, OnStar Advanced Diagnostics, if equipped, provides a way to keep up on maintenance. Capabilities vary by model. See www.onstar.com for details and system limitations. Features are subject to change. For updates on feature capabilities, see my.buick.com. Message and data rates may apply. Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Index Index A Accessories and Modifications . . . . . . . . . . . . . . . . . . 249 Accessory Power . . . . . . . . . . . . . . . 186 Adaptive Cruise Control . . . . . . . . 206 Add-On Electrical Equipment . . . 246 Additional Information OnStar . . . . . . . . . . . . . . . . . . . . . . . 360 Additional Maintenance and Care . . . . . . . . . . . . . . . . . . . . . . 334 Adjustments Lumbar, Front Seats . . . . . . . . . . . . 42 Air Cleaner/Filter, Engine . . . . . . . 257 Air Conditioning . . . . . . . . . . .156, 160 Air Filter Life System . . . . . . . . . . . . . . . . . . . 257 Air Filter, Passenger Compartment . . . . . . . . . . . . . . . . . 163 Air Vents . . . . . . . . . . . . . . . . . . . . . . . 162 Airbag System Check . . . . . . . . . . . . . . . . . . . . . . . . . . 73 How Does an Airbag Restrain? . . . . . . . . . . . . . . . . . . . . . 66 Passenger Sensing System . . . . 68 What Makes an Airbag Inflate? . . . . . . . . . . . . . . . . . . . . . . . . 66 What Will You See after an Airbag Inflates? . . . . . . . . . . . . . . . 67 369 Airbag System (cont'd) When Should an Airbag Inflate? . . . . . . . . . . . . . . . . . . . . . . . . 65 Where Are the Airbags? . . . . . . . . 63 Airbags Adding Equipment to the Vehicle . . . . . . . . . . . . . . . . . . . . . . . . 72 Passenger Status Indicator . . . 121 Readiness Light . . . . . . . . . . . . . . 120 Servicing Airbag-Equipped Vehicles . . . . . . . . . . . . . . . . . . . . . . . 72 System Check . . . . . . . . . . . . . . . . . . 61 Alarm Vehicle Security . . . . . . . . . . . . . . . . 28 Alert Lane Change . . . . . . . . . . . . . . . . . 227 Side Blind Zone (SBZA) . . . . . . 226 All-Season Tires . . . . . . . . . . . . . . . . 282 All-Wheel Drive . . . . . . . . . . . .197, 267 Antilock Brake System (ABS) . . . 197 Warning Light . . . . . . . . . . . . . . . . . 125 Appearance Care Exterior . . . . . . . . . . . . . . . . . . . . . . . 317 Interior . . . . . . . . . . . . . . . . . . . . . . . . 321 Assistance Program, Roadside . . . . . . . . . . . . . . . . . . . . . . 348 Assistance Systems for Driving . . . . . . . . . . . . . . . . . . . . . . . . 220 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 370 Index Assistance Systems for Parking and Backing . . . . . . . . . . 216 Auto Stop Stop/Start System . . . . . . . . . . . . 184 Automatic Dimming Mirrors . . . . . . . . . . . . . . . . 31 Door Locks . . . . . . . . . . . . . . . . . . . . . 19 Emergency Braking (AEB) . . . . 223 Headlamp System . . . . . . . . . . . . 149 Transmission . . . . . . . . . . . . . . . . . 191 Transmission Fluid . . . . . . . . . . . 256 Automatic Transmission Manual Mode . . . . . . . . . . . . . . . . . 196 Brakes (cont'd) Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . 265 Braking . . . . . . . . . . . . . . . . . . . . . . . . . 167 Automatic Emergency (AEB) . . . . . . . . . . . 223 Braking System Front Pedestrian (FPB) . . . . . . . 224 Break-In, New Vehicle . . . . . . . . . . 181 Bulb Replacement Headlamp Aiming . . . . . . . . . . . . . 271 Headlamps . . . . . . . . . . . . . . . . . . . 271 License Plate Lamps . . . . . . . . . 271 Buying New Tires . . . . . . . . . . . . . . . 297 B C Battery Exterior Lighting Battery Saver . . . . . . . . . . . . . . . . . . . . . . . 154 Load Management . . . . . . . . . . . . 153 Power Protection . . . . . . . . . . . . . 153 Battery - North America . . . . 266, 311 Blade Replacement, Wiper . . . . . 268 Brake Parking, Electric . . . . . . . . . . . . . . 198 System Warning Light . . . . . . . . 124 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . 264 Antilock . . . . . . . . . . . . . . . . . . . . . . . 197 Assist . . . . . . . . . . . . . . . . . . . . . . . . . 199 Calibration . . . . . . . . . . . . . . . . . . . . . . 105 California Perchlorate Materials Requirements . . . . . . . . . . . . . . . 249 California Proposition 65 Warning . . . . . . . . . .248, 266, 311, Back Cover Canadian Vehicle Owners . . . . . . . . 2 Capacities and Specifications . . . . . . . . . . . . . . . . . 341 Carbon Monoxide Engine Exhaust . . . . . . . . . . . . . . . 190 Carbon Monoxide (cont'd) Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . 21 Winter Driving . . . . . . . . . . . . . . . . 175 Cargo Management System . . . . . . . . . . . 97 Caution, Danger, and Warning . . . . 2 Center Console Storage . . . . . . . . . 97 Chains, Tire . . . . . . . . . . . . . . . . . . . . 301 Charging Wireless . . . . . . . . . . . . . . . . . . . . . . 107 Charging System Light . . . . . . . . . 122 Check Engine Light (Malfunction Indicator) . . . . . . . . . . . . . . . . . . . . 122 Child Restraints Infants and Young Children . . . . . 76 Lower Anchors and Tethers for Children . . . . . . . . . . . . . . . . . . . 81 Older Children . . . . . . . . . . . . . . . . . . 74 Securing . . . . . . . . . . . . . . . . . . . . 91, 93 Systems . . . . . . . . . . . . . . . . . . . . . . . . 78 Circuit Breakers . . . . . . . . . . . . . . . . 273 Cleaning Exterior Care . . . . . . . . . . . . . . . . . 317 Interior Care . . . . . . . . . . . . . . . . . . 321 Climate Control Systems Dual Automatic . . . . . . . . . . . . . . . 156 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Index Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Cluster, Instrument . . . . . . . . 111, 114 Collision Damage Repair . . . . . . . 351 Compact Spare Tire . . . . . . . . . . . . 309 Compartments Storage . . . . . . . . . . . . . . . . . . . . . . . . . 96 Compass . . . . . . . . . . . . . . . . . . . . . . . 105 Connected Services Connections . . . . . . . . . . . . . . . . . . 367 Diagnostics . . . . . . . . . . . . . . . . . . . 368 Navigation . . . . . . . . . . . . . . . . . . . . 366 Connections Connected Services . . . . . . . . . . 367 Control Traction and Electronic Stability . . . . . . . . . . . . . . . . . . . . . 200 Control of a Vehicle . . . . . . . . . . . . . 167 Convex Mirrors . . . . . . . . . . . . . . . . . . 30 Coolant Engine Temperature Gauge . . .118 Cooling . . . . . . . . . . . . . . . . . . . .156, 160 Cooling System . . . . . . . . . . . . . . . . . 258 Courtesy Lamps . . . . . . . . . . . . . . . . 151 Courtesy Transportation Program . . . . . . . . . . . . . . . . . . . . . . . 350 Cruise Control . . . . . . . . . . . . . . . . . . 203 Light . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Cruise Control, Adaptive . . . . . . . . 206 Cupholders . . . . . . . . . . . . . . . . . . . . . . 96 Customer Assistance . . . . . . . . . . . 347 Offices . . . . . . . . . . . . . . . . . . . . . . . . 346 Text Telephone (TTY) Users . . . . . . . . . . . . . . . . . . . . . . . 347 Customer Information Publications Ordering Information . . . . . . . . . . . . . . . . . . 353 Customer Satisfaction Procedure . . . . . . . . . . . . . . . . . . . . . 344 Cybersecurity . . . . . . . . . . . . . . . . . . . 356 D Damage Repair, Collision . . . . . . . 351 Danger, Warning, and Caution . . . . 2 Data Collection Infotainment System . . . . . . . . . . 357 OnStar . . . . . . . . . . . . . . . . . . . . . . . 357 Data Recorders, Event . . . . . . . . . 356 Daytime Running Lamps (DRL) . . . . . . . . . . . . . . . . . . 149 Defensive Driving . . . . . . . . . . . . . . . 166 Delayed Locking . . . . . . . . . . . . . . . . . 19 Diagnostics Connected Services . . . . . . . . . . 368 Distracted Driving . . . . . . . . . . . . . . . 165 Dome Lamps . . . . . . . . . . . . . . . . . . . 151 371 Door Ajar Light . . . . . . . . . . . . . . . . . . . . . 130 Delayed Locking . . . . . . . . . . . . . . . . 19 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Power Locks . . . . . . . . . . . . . . . . . . . . 19 Drive Belt Routing, Engine . . . . . . 343 Drive Systems All-Wheel Drive . . . . . . . . . . 197, 267 Driver Assistance Systems . . . . . 214 Driver Information Center (DIC) . . . . . . . . . . . . .130, 133 Driver Mode Control . . . . . . . . . . . . 202 Driving Assistance Systems . . . . . . . . . . 220 Better Fuel Economy . . . . . . . . . 165 Characteristics and Towing Tips . . . . . . . . . . . . . . . . . 234 Defensive . . . . . . . . . . . . . . . . . . . . . 166 Drunk . . . . . . . . . . . . . . . . . . . . . . . . . 166 Hill and Mountain Roads . . . . . . 174 If the Vehicle is Stuck . . . . . . . . . 176 Loss of Control . . . . . . . . . . . . . . . 168 Off-Road . . . . . . . . . . . . . . . . . . . . . 169 Off-Road Recovery . . . . . . . . . . . 168 Vehicle Load Limits . . . . . . . . . . . 177 Wet Roads . . . . . . . . . . . . . . . . . . . 173 Winter . . . . . . . . . . . . . . . . . . . . . . . . 175 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 372 Index Dual Automatic Climate Control System . . . . . . . . . . . . . . . . 156 E Electric Parking Brake . . . . . . . . . . 198 Electric Parking Brake Light . . . . 124 Electrical Equipment, Add-On . . . . . . . . . . . . . . . . . . . . . . . 246 Electrical System Engine Compartment Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . 273 Fuses and Circuit Breakers . . . 273 Instrument Panel Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . 277 Overload . . . . . . . . . . . . . . . . . . . . . 272 Rear Compartment Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . 278 Emergency OnStar . . . . . . . . . . . . . . . . . . . . . . . 359 Engine Air Cleaner/Filter . . . . . . . . . . . . . 257 Check Light (Malfunction Indicator) . . . . . . . . . . . . . . . . . . . . 122 Compartment Overview . . . . . . . 252 Coolant Temperature Gauge . . . . . . . . . . . . . . . . . . . . . . .118 Cooling System . . . . . . . . . . . . . . . 258 Drive Belt Routing . . . . . . . . . . . . 343 Engine (cont'd) Exhaust . . . . . . . . . . . . . . . . . . . . . . 190 Heater . . . . . . . . . . . . . . . . . . . . . . . . 185 Oil Life System . . . . . . . . . . . . . . . 255 Oil Pressure Light . . . . . . . . . . . . 128 Overheating . . . . . . . . . . . . . . . . . . 262 Power Messages . . . . . . . . . . . . . 136 Running While Parked . . . . . . . . 191 Starting . . . . . . . . . . . . . . . . . . . . . . . 183 Engine Air Filter Life System . . . . 257 Engine Oil Temperature Gauge . . . . . . . . . . .118 Entry Lighting . . . . . . . . . . . . . . . . . . . 152 Equipment, Towing . . . . . . . . . . . . . 241 Event Data Recorders . . . . . . . . . . 356 Exit Lighting . . . . . . . . . . . . . . . . . . . . 153 Extended Parking . . . . . . . . . . . . . . . 189 Extender, Seat Belt . . . . . . . . . . . . . . 60 Exterior Lamp Controls . . . . . . . . . 146 Exterior Lamps Off Reminder . . . 148 Exterior Lighting Battery Saver . . . . . . . . . . . . . . . . . . . . . . . . . 154 F Filter, Engine Air Cleaner . . . . . . . . . . . 257 Flash-to-Pass . . . . . . . . . . . . . . . . . . . 148 Flashers, Hazard Warning . . . . . . 150 Flat Tire . . . . . . . . . . . . . . . . . . . . . . . . 302 Changing . . . . . . . . . . . . . . . . . . . . . 304 Floor Mats . . . . . . . . . . . . . . . . . . . . . . 324 Fluid Automatic Transmission . . . . . . 256 Brakes . . . . . . . . . . . . . . . . . . . . . . . . 265 Washer . . . . . . . . . . . . . . . . . . . . . . . 263 Folding Mirrors . . . . . . . . . . . . . . . . . . 30 Forward Collision Alert (FCA) System . . . . . . . . . . . . . . . . . 221 Frequency Statement Radio . . . . . . . . . . . . . . . . . . . . . . . . . 354 Front Pedestrian Braking (FPB) System . . . . . . . . . . . . . . . . . 224 Front Seats Heated and Ventilated . . . . . . . . . . 46 Fuel Additives . . . . . . . . . . . . . . . . . . . . . 232 Economy, Driving for Better . . . 165 Filling a Portable Fuel Container . . . . . . . . . . . . . . . . . . . 234 Filling the Tank . . . . . . . . . . . . . . . 232 Foreign Countries . . . . . . . . . . . . 232 Gauge . . . . . . . . . . . . . . . . . . . . . . . . .117 Low Fuel Warning Light . . . . . . . 129 Prohibited Fuels . . . . . . . . . . . . . . 231 Recommended . . . . . . . . . . . . . . . 231 Top Tier . . . . . . . . . . . . . . . . . . . . . . 231 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Index Fuses Engine Compartment Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . Fuses and Circuit Breakers . . . Instrument Panel Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . Rear Compartment Fuse Block . . . . . . . . . . . . . . . . . . . . . . . . 273 273 277 278 G Garage Door Opener . . . . . . . . . . . 142 Programming . . . . . . . . . . . . . . . . . 142 Gas Strut(s) . . . . . . . . . . . . . . . . . . . . 269 Gauges Engine Coolant Temperature . . . . . . . . . . . . . . . . .118 Engine Oil Temperature . . . . . . . .118 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .117 Odometer . . . . . . . . . . . . . . . . . . . . . .116 Speedometer . . . . . . . . . . . . . . . . . .116 Tachometer . . . . . . . . . . . . . . . . . . . .116 Trip Odometer . . . . . . . . . . . . . . . . .116 Voltmeter . . . . . . . . . . . . . . . . . . . . . .119 Warning Lights and Indicators . . . . . . . . . . . . . . . . . . . .110 General Information Service and Maintenance . . . . . 326 Towing . . . . . . . . . . . . . . . . . . . . . . . . 234 General Information (cont'd) Vehicle Care . . . . . . . . . . . . . . . . . . 248 Glove Box . . . . . . . . . . . . . . . . . . . . . . . 96 GM Mobility Reimbursement Program . . . . . . . . . . . . . . . . . . . . . . . 347 H Hazard Warning Flashers . . . . . . . 150 Head Restraints . . . . . . . . . . . . . . . . . 40 Headlamps Aiming . . . . . . . . . . . . . . . . . . . . . . . . 271 Automatic . . . . . . . . . . . . . . . . . . . . . 149 Bulb Replacement . . . . . . . . . . . . 271 Daytime Running Lamps (DRL) . . . . . . . . . . . . . . . . 149 Flash-to-Pass . . . . . . . . . . . . . . . . . 148 High-Beam On Light . . . . . . . . . . 129 High/Low Beam Changer . . . . . 148 Lamps On Reminder . . . . . . . . . 129 Heated Rear Seats . . . . . . . . . . . . . . . . . . . . . 51 Steering Wheel . . . . . . . . . . . . . . . 102 Heated and Ventilated Front Seats . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Heated Mirrors . . . . . . . . . . . . . . . . . . . 31 Heater Engine . . . . . . . . . . . . . . . . . . . . . . . . 185 Heating . . . . . . . . . . . . . . . . . . . .156, 160 373 High Voltage Devices and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . 272 High-Beam On Light . . . . . . . . . . . . 129 High-Speed Operation . . . . . . . . . . 289 Hill and Mountain Roads . . . . . . . . 174 Hill Start Assist (HSA) . . . . . . . . . . 200 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 How to Wear Seat Belts Properly . . . . . . . . . . . . . . . . . . . . . . . . 55 HVAC . . . . . . . . . . . . . . . . . . . . . .156, 160 I Ignition Positions . . . . . . . . . . . . . . . 181 Immobilizer . . . . . . . . . . . . . . . . . . . . . . 29 Indicator Pedestrian Ahead . . . . . . . . . . . . 126 Vehicle Ahead . . . . . . . . . . . . . . . . 126 Infants and Young Children, Restraints . . . . . . . . . . . . . . . . . . . . . . 76 Information Publication Ordering . . . . . . . . . . 353 Infotainment . . . . . . . . . . . . . . . . . . . . 155 Infotainment System . . . . . . . . . . . . 357 Instrument Cluster . . . . . . . . . 111, 114 Instrument Panel Overview . . . . . . . 5 Interior Rearview Mirrors . . . . . . . . . 32 Introduction . . . . . . . . . . . . . . . . . . . . . . . 2 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 374 Index J Jump Starting - North America . . . . . . . . . . . . . . . . . . . . . . . 311 K Keyless Entry Remote (RKE) System . . . . . . . . . . 8 Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 L Labeling, Tire Sidewall . . . . . . . . . . 283 Lamps Courtesy . . . . . . . . . . . . . . . . . . . . . . 151 Daytime Running (DRL) . . . . . . 149 Dome . . . . . . . . . . . . . . . . . . . . . . . . . 151 Exterior Controls . . . . . . . . . . . . . . 146 Exterior Lamps Off Reminder . . . . . . . . . . . . . . . . . . . 148 Exterior Lighting Battery Saver . . . . . . . . . . . . . . . . . . . . . . . 154 License Plate . . . . . . . . . . . . . . . . . 271 Malfunction Indicator (Check Engine) . . . . . . . . . . . . . 122 On Reminder . . . . . . . . . . . . . . . . . 129 Reading . . . . . . . . . . . . . . . . . . . . . . 151 Lane Change Alert (LCA) . . . . . . . 227 Lane Keep Assist (LKA) . . . . . . . . 229 Lane Keep Assist Light . . . . . . . . . 126 Lap-Shoulder Belt . . . . . . . . . . . . . . . 57 LATCH System Replacing Parts after a Crash . . . . . . . . . . . . . . . . . . . . . . . . . 90 LATCH, Lower Anchors and Tethers for Children . . . . . . . . . . . . 81 LED Lighting . . . . . . . . . . . . . . . . . . . . 271 Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Lighting Entry . . . . . . . . . . . . . . . . . . . . . . . . . 152 Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Illumination Control . . . . . . . . . . . 151 LED . . . . . . . . . . . . . . . . . . . . . . . . . . 271 Lights Airbag Readiness . . . . . . . . . . . . . 120 Antilock Brake System (ABS) Warning . . . . . . . . . . . . . . 125 Brake System Warning . . . . . . . 124 Charging System . . . . . . . . . . . . . 122 Check Engine (Malfunction Indicator) . . . . . . . . . . . . . . . . . . . . 122 Cruise Control . . . . . . . . . . . . . . . . 130 Door Ajar . . . . . . . . . . . . . . . . . . . . . 130 Electric Parking Brake . . . . . . . . 124 Engine Oil Pressure . . . . . . . . . . 128 Flash-to-Pass . . . . . . . . . . . . . . . . . 148 High-Beam On . . . . . . . . . . . . . . . . 129 High/Low Beam Changer . . . . . 148 Lane Keep Assist . . . . . . . . . . . . . 126 Lights (cont'd) Low Fuel Warning . . . . . . . . . . . . 129 Seat Belt Reminders . . . . . . . . . . 120 Security . . . . . . . . . . . . . . . . . . . . . . 129 Service Electric Parking Brake . . . . . . . . . . . . . . . . . . . . . . . 125 Sport Mode . . . . . . . . . . . . . . . . . . . 125 StabiliTrak OFF . . . . . . . . . . . . . . . 127 Tire Pressure . . . . . . . . . . . . . . . . . 128 Tow/Haul Mode . . . . . . . . . . . . . . . 125 Traction Control System (TCS)/StabiliTrak . . . . . . . . . . . . 127 Traction Off . . . . . . . . . . . . . . . . . . . 127 Locks Automatic Door . . . . . . . . . . . . . . . . . 19 Delayed Locking . . . . . . . . . . . . . . . . 19 Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Lockout Protection . . . . . . . . . . . . . . 20 Power Door . . . . . . . . . . . . . . . . . . . . . 19 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Loss of Control . . . . . . . . . . . . . . . . . 168 Low Fuel Warning Light . . . . . . . . . 129 Lower Anchors and Tethers for Children (LATCH System) . . . . . . . . . . . . . . . . . . . . . . . . 81 Lumbar Adjustment . . . . . . . . . . . . . . 42 Front Seats . . . . . . . . . . . . . . . . . . . . . 42 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Index M Maintenance Records . . . . . . . . . . . . . . . . . . . . . . 339 Maintenance and Care Additional . . . . . . . . . . . . . . . . . . . . . 334 Maintenance Schedule . . . . . . . . . 328 Recommended Fluids and Lubricants . . . . . . . . . . . . . . . . . . . 337 Malfunction Indicator Lamp . . . . . 122 Manual Mode . . . . . . . . . . . . . . . . . . . 196 Massage . . . . . . . . . . . . . . . . . . . . . . . . 48 Memory Seats . . . . . . . . . . . . . . . . . . . 43 Messages Engine Power . . . . . . . . . . . . . . . . 136 Vehicle . . . . . . . . . . . . . . . . . . . . . . . 136 Vehicle Speed . . . . . . . . . . . . . . . . 137 Mirror Rear Camera . . . . . . . . . . . . . . . . . . . 32 Mirrors Automatic Dimming . . . . . . . . . . . . . 31 Automatic Dimming Rearview . . . . . . . . . . . . . . . . . . . . . . 32 Convex . . . . . . . . . . . . . . . . . . . . . . . . . 30 Folding . . . . . . . . . . . . . . . . . . . . . . . . . 30 Heated . . . . . . . . . . . . . . . . . . . . . . . . . 31 Power . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Tilt in Reverse . . . . . . . . . . . . . . . . . . 31 Mirrors, Interior Rearview . . . . . . . . 32 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Driver Control . . . . . . . . . . . . . . . . . 202 Monitor System, Tire Pressure . . . . . . . . . . . . . . . . . . . . . . 290 N Navigation Connected Services . . . . . . . . . . 366 New Vehicle Break-In . . . . . . . . . . . 181 O Odometer . . . . . . . . . . . . . . . . . . . . . . . 116 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . .116 Off-Road . . . . . . . . . . . . . . . . . . . . . . . 169 Driving . . . . . . . . . . . . . . . . . . . . . . . . 169 Recovery . . . . . . . . . . . . . . . . . . . . . 168 Oil Engine . . . . . . . . . . . . . . . . . . . . . . . . 253 Engine Oil Life System . . . . . . . 255 Pressure Light . . . . . . . . . . . . . . . . 128 Older Children, Restraints . . . . . . . 74 Online Owner Center . . . . . . . . . . . 347 OnStar . . . . . . . . . . . . . . . . . . . . . . . . . 357 OnStar Additional Information . . . . . . . . . . . . . . . . . . . . 360 OnStar Emergency . . . . . . . . . . . . . 359 OnStar Overview . . . . . . . . . . . . . . . 358 OnStar Security . . . . . . . . . . . . . . . . 360 375 Outlets Power . . . . . . . . . . . . . . . . . . . . . . . . 106 Overheating, Engine . . . . . . . . . . . . 262 Overview Instrument Panel . . . . . . . . . . . . . . . . 5 P Park Shifting Out of . . . . . . . . . . . . . . . . 187 Park Assist . . . . . . . . . . . . . . . . . . . . . 216 Parking Brake and P (Park) Mechanism Check . . . . . . . . . . 267 Extended . . . . . . . . . . . . . . . . . . . . . 189 Over Things That Burn . . . . . . . 189 Parking or Backing Assistance Systems . . . . . . . . . . 216 Passenger Airbag Status Indicator . . . . . . . . . . . . . . . . . . . . . . 121 Passenger Compartment Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . 163 Passenger Sensing System . . . . . 68 Pedestrian Ahead Indicator . . . . . 126 Perchlorate Materials Requirements, California . . . . . . 249 Personalization Vehicle . . . . . . . . . . . . . . . . . . . . . . . 137 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 376 Index Power Door Locks . . . . . . . . . . . . . . . . . . . . . 19 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Outlets . . . . . . . . . . . . . . . . . . . . . . . 106 Protection, Battery . . . . . . . . . . . . 153 Retained Accessory (RAP) . . . 186 Seat Adjustment . . . . . . . . . . . . . . . . 42 Windows . . . . . . . . . . . . . . . . . . . . . . . 34 Pregnancy, Using Seat Belts . . . . 59 Privacy Vehicle Data Recording . . . . . . . 355 Program Courtesy Transportation . . . . . . 350 Prohibited Fuels . . . . . . . . . . . . . . . . 231 Proposition 65 Warning, California . . . . . . . . . . . .248, 266, 311, Back Cover Publication Ordering Information . . . . . . . . . . . . . . . . . . . . 353 R Radio Frequency Statement . . . . 354 Reading Lamps . . . . . . . . . . . . . . . . . 151 Rear Camera Mirror . . . . . . . . . . . . . 32 Rear Climate Control System . . . 160 Rear Seats . . . . . . . . . . . . . . . . . . . . . . 48 Heated . . . . . . . . . . . . . . . . . . . . . . . . . 51 Rear Vision Camera (RVC) . . . . . 216 Rear Window Washer/Wiper . . . . 104 Rearview Mirrors Automatic Dimming . . . . . . . . . . . . . 32 Reclining Seatbacks . . . . . . . . . . . . . 43 Recommended Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 231 Recommended Fluids and Lubricants . . . . . . . . . . . . . . . . . . . . . 337 Records Maintenance . . . . . . . . . . . . . . . . . . 339 Recreational Vehicle Towing . . . . 314 Reimbursement Program, GM Mobility . . . . . . . . . . . . . . . . . . . 347 Remote Keyless Entry (RKE) System . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Remote Vehicle Start . . . . . . . . . . . . 15 Replacement Parts Airbags . . . . . . . . . . . . . . . . . . . . . . . . . 74 Maintenance . . . . . . . . . . . . . . . . . . 338 Replacing Airbag System . . . . . . . . 74 Replacing LATCH System Parts after a Crash . . . . . . . . . . . . . 90 Replacing Seat Belt System Parts after a Crash . . . . . . . . . . . . . 61 Reporting Safety Defects Canadian Government . . . . . . . . 355 General Motors . . . . . . . . . . . . . . . 355 Reporting Safety Defects (cont'd) U.S. Government . . . . . . . . . . . . . 354 Restraints Where to Put . . . . . . . . . . . . . . . . . . . 80 Retained Accessory Power (RAP) . . . . . . . . . . . . . . . . . . 186 Reverse Tilt Mirrors . . . . . . . . . . . . . . 31 Roads Driving, Wet . . . . . . . . . . . . . . . . . . 173 Roadside Assistance Program . . . . . . . . . . . . . . . . . . . . . . . 348 Roof Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . 37 Roof Rack System . . . . . . . . . . . . . . . 99 Rotation, Tires . . . . . . . . . . . . . . . . . . 295 Routing, Engine Drive Belt . . . . . . 343 Running the Vehicle While Parked . . . . . . . . . . . . . . . . . . . . . . . . 191 S Safety Defects Reporting Canadian Government . . . . . . . . 355 General Motors . . . . . . . . . . . . . . . 355 U.S. Government . . . . . . . . . . . . . 354 Safety Locks . . . . . . . . . . . . . . . . . . . . . 20 Safety System Check . . . . . . . . . . . . 60 Scheduling Appointments . . . . . . . 349 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . 54 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Index Seat Belts (cont'd) Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Extender . . . . . . . . . . . . . . . . . . . . . . . . 60 How to Wear Seat Belts Properly . . . . . . . . . . . . . . . . . . . . . . . 55 Lap-Shoulder Belt . . . . . . . . . . . . . . 57 Reminders . . . . . . . . . . . . . . . . . . . . 120 Replacing after a Crash . . . . . . . . 61 Use During Pregnancy . . . . . . . . . . 59 Seats Head Restraints . . . . . . . . . . . . . . . . 40 Heated and Ventilated Front . . . . 46 Heated, Rear . . . . . . . . . . . . . . . . . . . 51 Lumbar Adjustment, Front . . . . . . 42 Memory . . . . . . . . . . . . . . . . . . . . . . . . . 43 Power Adjustment, Front . . . . . . . 42 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Reclining Seatbacks . . . . . . . . . . . . 43 Third Row Seat . . . . . . . . . . . . . . . . . 51 Securing Child Restraints . . . . 91, 93 Security Light . . . . . . . . . . . . . . . . . . . . . . . . . . 129 OnStar . . . . . . . . . . . . . . . . . . . . . . . 360 Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 28 Vehicle Alarm . . . . . . . . . . . . . . . . . . . 28 Service . . . . . . . . . . . . . . . . . . . . . . . . . 163 Accessories and Modifications . . . . . . . . . . . . . . . . 249 Service (cont'd) Doing Your Own Work . . . . . . . . 249 Maintenance Records . . . . . . . . 339 Maintenance, General Information . . . . . . . . . . . . . . . . . . 326 Parts Identification . . . . . . . . . . . . 340 Scheduling Appointments . . . . . 349 Service Electric Parking Brake Light . . . . . . . . . . . . . . . . . . . . 125 Services Special Application . . . . . . . . . . . 333 Servicing the Airbag . . . . . . . . . . . . . 72 Shifting Into Park . . . . . . . . . . . . . . . . . . . . . . 186 Out of Park . . . . . . . . . . . . . . . . . . . 187 Side Blind Zone Alert (SBZA) . . . 226 Signals, Turn and Lane-Change . . . . . . . . . . . . . . . . . 150 Spare Tire Compact . . . . . . . . . . . . . . . . . . . . . . 309 Special Application Services . . . . 333 Specifications and Capacities . . . . . . . . . . . . . . . . . . . . . 341 Speedometer . . . . . . . . . . . . . . . . . . . 116 Sport Mode Light . . . . . . . . . . . . . . . 125 StabiliTrak OFF Light . . . . . . . . . . . . . . . . . . . . . 127 Start Assist, Hill . . . . . . . . . . . . . . . . . 200 377 Start Vehicle, Remote . . . . . . . . . . . 15 Starter Switch Check . . . . . . . . . . . 267 Starting the Engine . . . . . . . . . . . . . 183 Steering . . . . . . . . . . . . . . . . . . . . . . . . 167 Heated Wheel . . . . . . . . . . . . . . . . 102 Wheel Adjustment . . . . . . . . . . . . 102 Wheel Controls . . . . . . . . . . . . . . . 102 Stop/Start System . . . . . . . . . . . . . . 184 Storage Areas Cargo Management System . . . . 97 Center Console . . . . . . . . . . . . . . . . . 97 Glove Box . . . . . . . . . . . . . . . . . . . . . . 96 Roof Rack System . . . . . . . . . . . . . . 99 Sunglasses . . . . . . . . . . . . . . . . . . . . . 97 Storage Compartments . . . . . . . . . . 96 Struts Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 Stuck Vehicle . . . . . . . . . . . . . . . . . . . 176 Sun Visors . . . . . . . . . . . . . . . . . . . . . . . 36 Sunglass Storage . . . . . . . . . . . . . . . . 97 Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Engine Air Filter Life . . . . . . . . . . 257 Forward Collision Alert (FCA) . . . . . . . . . . . . . . . . . . 221 Infotainment . . . . . . . . . . . . . 155, 357 Roof Rack . . . . . . . . . . . . . . . . . . . . . . 99 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 378 Index Systems Driver Assistance . . . . . . . . . . . . . 214 T Tachometer . . . . . . . . . . . . . . . . . . . . . 116 Text Telephone (TTY) Users . . . . 347 Theft-Deterrent Systems . . . . . . . . . 29 Immobilizer . . . . . . . . . . . . . . . . . . . . . 29 Third-Row Seats . . . . . . . . . . . . . . . . . 51 Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 All-Season . . . . . . . . . . . . . . . . . . . . 282 Buying New Tires . . . . . . . . . . . . . 297 Chains . . . . . . . . . . . . . . . . . . . . . . . . 301 Changing . . . . . . . . . . . . . . . . . . . . . 304 Compact Spare . . . . . . . . . . . . . . . 309 Designations . . . . . . . . . . . . . . . . . 285 Different Size . . . . . . . . . . . . . . . . . 298 If a Tire Goes Flat . . . . . . . . . . . . 302 Inspection . . . . . . . . . . . . . . . . . . . . 295 Pressure . . . . . . . . . . . . . . . . . 288, 289 Pressure Light . . . . . . . . . . . . . . . . 128 Pressure Monitor Operation . . 291 Pressure Monitor System . . . . . 290 Rotation . . . . . . . . . . . . . . . . . . . . . . 295 Sidewall Labeling . . . . . . . . . . . . . 283 Terminology and Definitions . . 285 Tires (cont'd) Uniform Tire Quality Grading . . . . . . . . . . . . . . . . . . . . . 299 Wheel Alignment and Tire Balance . . . . . . . . . . . . . . . . . . . . . 300 Wheel Replacement . . . . . . . . . . 301 When It Is Time for New Tires . . . . . . . . . . . . . . . . . . . . . . . . 296 Winter . . . . . . . . . . . . . . . . . . . . . . . . 282 Top Tier Fuel . . . . . . . . . . . . . . . . . . . 231 Tow/Haul Mode . . . . . . . . . . . . . . . . . 196 Tow/Haul Mode Light . . . . . . . . . . . 125 Towing Driving Characteristics . . . . . . . . 234 Equipment . . . . . . . . . . . . . . . . . . . . 241 General Information . . . . . . . . . . 234 Recreational Vehicle . . . . . . . . . . 314 Trailer . . . . . . . . . . . . . . . . . . . . . . . . 238 Trailer Sway Control (TSC) . . . 244 Vehicle . . . . . . . . . . . . . . . . . . . . . . . 313 Traction Control System (TCS)/StabiliTrak Light . . . . . . 127 Off Light . . . . . . . . . . . . . . . . . . . . . . 127 Traction Control/Electronic Stability Control . . . . . . . . . . . . . . . 200 Trailer Sway Control (TSC) . . . . . . . . . . 244 Trailer (cont'd) Towing . . . . . . . . . . . . . . . . . . . . . . . . 238 Transmission Automatic . . . . . . . . . . . . . . . . . . . . . 191 Fluid, Automatic . . . . . . . . . . . . . . 256 Transportation Program, Courtesy . . . . . . . . . . . . . . . . . . . . . . 350 Trip Odometer . . . . . . . . . . . . . . . . . . 116 Turn and Lane-Change Signals . . . . . . . . . . . . . . . . . . . . . . . . 150 U Uniform Tire Quality Grading . . . 299 Universal Remote System . . . . . . 142 Operation . . . . . . . . . . . . . . . . . . . . . 144 Programming . . . . . . . . . . . . . . . . . 142 Using This Manual . . . . . . . . . . . . . . . . 2 V Vehicle Alarm System . . . . . . . . . . . . . . . . . . 28 Canadian Owners . . . . . . . . . . . . . . . 2 Control . . . . . . . . . . . . . . . . . . . . . . . 167 Identification Number (VIN) . . . 340 Load Limits . . . . . . . . . . . . . . . . . . . 177 Messages . . . . . . . . . . . . . . . . . . . . 136 Personalization . . . . . . . . . . . . . . . 137 Remote Start . . . . . . . . . . . . . . . . . . . 15 Security . . . . . . . . . . . . . . . . . . . . . . . . 28 Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico13527524) - 2020 - CRC - 4/10/19 Index Vehicle (cont'd) Speed Messages . . . . . . . . . . . . . 137 Towing . . . . . . . . . . . . . . . . . . . . . . . . 313 Vehicle Ahead Indicator . . . . . . . . 126 Vehicle Care Tire Pressure . . . . . . . . . . . . . . . . . 288 Vehicle Data Recording and Privacy . . . . . . . . . . . . . . . . . . . . . . . . 355 Ventilation, Air . . . . . . . . . . . . . . . . . . 162 Visors . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Voltage Devices and Wiring . . . . 272 Voltmeter Gauge . . . . . . . . . . . . . . . 119 W Warning Brake System Light . . . . . . . . . . . 124 Caution and Danger . . . . . . . . . . . . . 2 Warning Lights, Gauges, and Indicators . . . . . . . . . . . . . . . . . . . . . 110 Warnings Hazard Flashers . . . . . . . . . . . . . . 150 Washer Fluid . . . . . . . . . . . . . . . . . . . 263 Wheels Alignment and Tire Balance . . 300 Different Size . . . . . . . . . . . . . . . . . 298 Replacement . . . . . . . . . . . . . . . . . 301 When It Is Time for New Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 296 Where to Put the Restraint . . . . . . 80 Windows . . . . . . . . . . . . . . . . . . . . . . . . 34 Power . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Windshield Replacement . . . . . . . . . . . . . . . . . 269 Wiper/Washer . . . . . . . . . . . . . . . . 103 Winter Driving . . . . . . . . . . . . . . . . . . . . . . . . 175 Winter Tires . . . . . . . . . . . . . . . . . . . . 282 Wiper Blade Replacement . . . . . . 268 Wipers Rear Washer . . . . . . . . . . . . . . . . . 104 Wireless Charging . . . . . . . . . . . . . . 107 Wiring, High Voltage Devices . . . 272 379 20_BUI_Enclave_COV_en_US_84337752A_2019APR18.ai 1 4/4/2019 9:29:24 AM 2020 Enclave C M Enclave Owner’s Manual Y CM MY CY CMY K 84337752 A