Chevrolet - Chevy II Nova - Parts Catalogue - 2019 - 2020

200-I BUYERS GUIDE ‘62-67 Chevy II Nova g-Machine – Pro Touring – Restomod – Pro Street – Street/Strip The Most Complete Chevy II Subframe System! ▪ Single or DoubleAdjustable Shock Valving Inner Fenders SHOCKS Coil-Over or Air-Suspension ▪ Fender Supports with Hinge Mounts ▪ Aluminum Inner Fender Panels ▪ 5-Different Kits with Various Options ▪ Splash Flaps BRAKES Drag-Race thru Big Brake Kits www.CAChassisworks.com HOME Table of Contents Table of Contents......................................................2 Shock-System Options...................................................... 22 VariShock Accessories....................................................... 24 '62-67 Chevy II Bolt-On Strut Clip............................4 VariShock Air-Spring Shocks............................................. 25 Air Management.............................................................. 26 Chevy II g-Machine Subframe System.....................6 Value Subframe System Package...................................... 14 Option Subframe System Package.................................... 15 Pro-Touring Subframe System Package............................. 16 Drag Race Subframe System Package............................... 17 Inner Fender Panels.......................................................... 18 Billet Side Motor Mounts.................................................. 19 Bolt-In Motor Plates......................................................... 20 Bolt-In Mid Plates............................................................. 21 Street-Machine A-Arms.................................................... 27 g-Machine A-Arms............................................................ 29 g-Machine Suspension Accessories.................................. 30 g-Machine Sculpted Spindles............................................ 31 Fabricated Drag-Race Spindles......................................... 31 2 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Table of Contents Headers, g-Machine System............................................. 52 Drag-Race Front Brakes.................................................... 32 g-Street™ - 11-3/4" - 4-Piston........................................ 33 g-Machine 13" - 4-Piston................................................. 34 g-Machine 14" - 6-Piston................................................. 35 '62-67 Chevy II Front Coil-Over Conversion...................... 53 '62-67 Chevy II Front Air-Spring Conversion..................... 56 gStreet Billet Upright and Brake Kit.................................. 36 gStreet Billet-Aluminum Upright...................................... 37 gStreet Threaded Bump-Steer Kit...................................... 38 gStreet 14” and 15” Front Brake Kits............................... 39 g-Bar and g-Link Suspension Conversions............57 g-Bar Rear Anti-Roll Bars.................................................. 65 g-Bar FAB9 Rearend Housings.......................................... 67 g-Machine Anti-Roll Bars.................................................. 42 Billet Gun-Drilled Anti-Roll Bar......................................... 43 Steering Columns and Accessories................................... 44 g-Machine-System Power Steering Pump......................... 45 g-Machine Power Rack and Pinion................................... 46 Billet Manual Rack and Pinion......................................... 48 OEM-Replacement FAB9 Housings................................... 69 '62-67 Chevy II Mini-Tubs................................................. 70 '62-67 Chevy II g-Connector System................................ 71 Customer Cars.................................................................. 73 Terms and Conditions.............................................75 Steering Columns and Components................................. 50 Bump-Steer Tie-Rod Sets.................................................. 51 Standard Tie-Rod Set........................................................ 51 E Email: [email protected] E Web: CAChassisworks.com 3 HOME '62-67 Chevy II Bolt-On Strut Clip Reduce front-end weight with our extremely lightweight 4130 Put The Hottest Bolt-On Front strut suspension system (124 Strut Clip Around On lb); designed as a direct bolt-on for Your Chevy II ‘62-’67 Chevy II drag race vehicles. The clip attaches to the car using the factory lowerframe and firewall mounts. Our front clips are completely factory-welded and built from 1‑5/8 x .083” 4130, round tubing to create additional engine-bay room for tall-deck engines, large-diameter headers, and custom plumbing. The packaged system includes the factory-welded frame clip (bare steel), doubleadjustable billet VariStruts, control arms with 4130 rod ends, billet-aluminum drag-race rack, billet rack clamps, bump-steer-adjustable tie-rod ends, and complete disc-brake set with billet hubs, lightweight rotors and Wilwood 4-piston aluminum calipers. Only ◾ Billet VariStruts Billet VariStruts feature double-adjustable valving, an adjustable-height spherical-bearing top mount, and 6” of suspension travel; ideal for restricted tire-size racing classes. The dual 16-position valve-adjustment knobs allow you to precisely tune the rate of weight transfer at launch and how the chassis settles down track. The upper strut mount’s threaded mechanism is exclusive to Chassisworks and allows you to fine tune vehicle ride height and balance without sacrificing front suspension travel. OPTION - High-Rebound Strut VariShock’s piggyback-style, 6” travel, drag race strut achieves significantly higher rebound forces than our single-body struts through use of a completely new valve system. The combination of finer control at higher pressures with increased fluid volume greatly improves the struts ability to control the front end’s reaction during launches. This is a highly recommended upgrade for extreme horsepower, small-tire vehicles competing at the top rank of professional levels. 4 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 124 pounds! (As shown above) Front clip ships as a complete factory-welded assembly with bare-metal finish ◾ Coil-Spring Rate Baseline FRONT VEHICLE WEIGHT (LB) 900-1025 1025-1175 1175-1350 1350-1500 1500-1825 1825-2200 2200-2600 RATE (LB/IN) 110 130 150 175 200 250 300 SPRING TRAVEL (IN) 7.91 8.43 7.61 7.60 7.45 7.00 7.07 PART NUMBER VAS 21-12110 VAS 21-12130 VAS 21-12150 VAS 21-12175 VAS 21-12200 VAS 21-12250 VAS 21-12300 HOME '62-67 Chevy II Bolt-On Strut Clip ◾ Strut Brake Options Standard brake options include billet aluminum single-piston floating calipers with 10-1/4” rotors for spindle-mounted wheels or dual-piston fixed calipers with 10" rotors for hub-mounted wheels. E Spindle-mount brakes with optional slotted rotor A four-piston forged-aluminum caliper with 11-3/4” rotor option is also available for heavier vehicles. Optional slotted rotors can be selected to further reduce weight. Product detail on page 5. E Light-duty brakes with optional slotted rotor E Medium-duty brakes with optional slotted rotor See page 5 for more info. ◾ Drag-Race Billet Rack and Pinion Our all new drag-race billet rack cures the annoyance of inadequate turning radius when maneuvering around the pits by increasing rack travel to 6-5/8”. The additional travel does not disrupt the high-speed stability of the strut’s slower steering geometry created by lengthening the steering arms but simply allows you to turn the strut at sharper angles when needed. ◾ Drivetrain Mounts Factory-welded motor- and mid-plate mounting tabs make installation of our profile-milled motor and mid plates easy and extremely clean. Small-block Chevy motor plates (1483) are a direct fit, but big-block Chevy plates (6046) require billet adapter kit (6047). The mid plate (6059) bolts directly to the lower frame mounts and fits Lakewood and other similar bellhousings. 6046 6047 F Mid plate mounts to inner holes of factory main subframe joint. Frameadapter brackets enable the mid plate to be removed and reinstalled without disrupting the main subframe joint. 7702 FRAME OPTIONS STRUT OPTIONS BRAKE OPTIONS MOTOR-PLATE OPTIONS MID-PLATE OPTIONS STRUT CLIP BOLT-ON ‘62-67 CHEVY II INCLUDES: 4130-STEEL ROUND-TUBE FRAME CLIP, DOUBLE-ADJUSTABLE STRUTS, CONTROL ARMS WITH 4130 ROD ENDS, BILLET SATIN-FINISH DRAG-RACE RACK WITH BUMP-STEER-ADJUSTABLE TIE-ROD ENDS, BILLET RACK CLAMPS, AND COMPLETE DISCBRAKE SET WITH BILLET HUBS, SOLID ROTORS, AND WILWOOD CALIPERS EXTRA 4130 WELD-ON FRAME ADAPTER PLATES (TO ATTACH TO TUBE CHASSIS) LIGHTWEIGHT STOCK BUMPER MOUNTS, 4130 DOUBLE-ADJUSTABLE 6” TRAVEL STRUTS HIGH-REBOUND, PIGGYBACK RESERVOIR, DOUBLE-ADJUSTABLE, 6” TRAVEL STRUTS SPINDLE MOUNT BRAKE FOR WELD & AMERICAN WHEELS L/D DISC BRAKE SOLID 10” X .35” ROTORS AND BLACK CALIPERS L/D DISC BRAKE SLOTTED 10” X .35” ROTORS AND BLACK CALIPERS M/D DISC BRAKE SLOTTED 11.75” X .35” ROTORS AND BLACK CALIPERS M/D DISC BRAKE SLOTTED 11.75” X .35” ROTORS AND POLISHED CALIPERS SMALL-BLOCK-CHEVY MOTOR PLATE BIG-BLOCK-CHEVY MOTOR PLATE AND ADAPTERS AUTOMATIC MID PLATE WITH 1/2” OFFSET TO PASSENGER SIDE LAKEWOOD CAN MID PLATE WITH 1/2” OFFSET TO PASSENGER SIDE 1/4” THICK ALUMINUM MID PLATE NO FRAME ADAPTERS E Email: [email protected] E Web: CAChassisworks.com 5 HOME Chevy II g-Machine Subframe System Chassisworks’ muscle-car g-Machine Chevy II subframe is a direct-fit, high-performance suspension solution designed for 1962-67 Chevrolet Chevy II Novas and 1963-67 Pontiac Acadians. The system features a welded subframe with integrated g-Machine double A-arm, rack-and-pinion crossmember and two supporting struts, all secured at the factory firewall mounting locations. Our direct bolt-on design enables a time-saving, straight-forward installation that requires absolutely no custom fabrication. Unlike others, the g-Machine Chevy II subframe is completely boxed with welded radiator-core-support crossmember, high-clearance bent support struts for engine and exhaust clearance, and optional aluminum inner fender panels and steel fender supports with integrated hood-hinge mounts. As an option, factory-welded motor-plate brackets can also be added for vehicles requiring maximum chassis stiffness, while an optional mid plate is a simple bolt-on. ◾ Single-Box Shipment! The Chevy II g-Machine system components are individually packed to prevent damage during shipping and to ease part identification during assembly. All boxed components are then loaded into a heavyduty, pallet-mounted box and truck-freighted directly to your door — avoiding confusing multiple-package paperwork and lost shipments. 6 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Chevy II g-Machine Subframe System ◾ Precision-Fit Quality Through Advanced Technology One of the key pieces of advanced technical equipment used in development of our vehicle-retrofit component systems is the FaroArm portable coordinatemeasuring machine. The FaroArm is an articulating, multi-segmented arm that enables precise three-dimensional digitization of vehicle surfaces and mounting points, accurate to within .003”. To begin, multiple identical vehicles are extensively measured to find the OEM tolerance range we must accommodate in our final design. From these scans, an exact model of the vehicle chassis is created in our Pro/ENGINEER software. Engineers can then accurately and efficiently design systems, simulate movement or conditions, and conduct finite element analysis (FEA) testing to optimize performance and durability before physically making any parts. Manufacturing fixtures and tooling are also based on the original vehicle scans, avoiding loose tolerances of transferred prototype dimensions and ensuring the quality and ease of fit of the final product. E Email: [email protected] E Web: CAChassisworks.com 7 HOME Chevy II g-Machine Subframe System ◾ Clean-Sheet Design, Not Revised OEM Geometry Chassisworks’ g-Machine front end is a truly versatile high-performance system, suitable for g-Machines, muscle cars, or any project in need of optimized handling. State-of-the-art engineering workstations with Pro/ENGINEER software—combined with our advanced, automated factory—enabled Chassisworks’ engineers to create a current-technology, competitively priced g-Machine front clip and suspension for first- and second-generation Chevy II Novas and Pontiac Acadians. Chassisworks’ new g-Machine design is far superior in performance, reliability, and ease of installation than components made to replace 40-year-old ‘60s muscle-car geometry and variants of the 30-year-old Mustang II suspension. Although late-model-Corvette–based systems offer similar performance, your choice of wheels is extremely limited to flat-face, high-negative-offset wheels. Our complete suspension and steering system is factory-welded directly to the bent-tube billet-component crossmember, ensuring perfect geometry and eliminating the need to weld multiple pieces or make complicated measurements while installing the system. The Chassisworks’ Design Is Superior in These Key Areas: ◾ Single piece, 4 x 2 x .120” crossmember with large-radius mandrel bends to distribute loads throughout the crossmember, eliminating fatigue points at critical areas. ◾ By making our own billet rack-and-pinion assembly, we are able to offer perfect front-suspension geometry at the correct hub-to-hub width. ◾ Rack and pinion is placed forward of the axle centerline (front steer) for better oil-pan clearance and rotates to eliminate sharp universal-joint angles and improve exhaust clearance. ◾ With nearly zero bumpsteer in 6” of suspension travel, vehicle handling is predictable regardless of the chassis’ changing pitch or roll state. ◾ Broad lower control arm increases load capacity and stability during braking and cornering. ◾ Longer lower control arm length reduces track-width change and roll-center movement during suspension travel for smoother transitions entering and exiting turns. ◾ Lower shock mount is located very close to the balljoint for better shock-motion ratio. A higher shock-motion ratio allows use of lighter, lower-rate springs for better suspension control without degrading ride quality. ◾ Our g-Machine spindle is taller than OEM spindles and therefore increases camber gain during body roll, keeping tires in better contact with road surface. ◾ Two-inch-dropped spindle lowers ride height and center of gravity to improve overall handling. (Optional shock mounts are available to raise car to “near stock” ride height.) ◾ Short/long arm (SLA) suspension layout is a compact, low-profile suspension design that leaves plenty of room around the engine. ◾ Traditional hub-style spindle accepts up to 14” brakes and allows more wheel choices compared to Corvette-style spindles. 8 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Chevy II g-Machine Subframe System ◾ Suspension and Steering Components A broad range of suspension and steering components enables the system to be custom-outfitted to match your performance requirements. Options include manual or power rack-and-pinion, Street- or g-Machine control arms, behind-crossmember– or forward-of-rack–mounted anti-roll bars, fabricated or sculpted spindles, and 11‑3/4”-rotor street brakes or 13”- or 14”-rotor high-performance brakes. Bolton installation with perfect geometry and tailored performance make the g‑Machine system an excellent choice for your next project. ◾ Improved-Fit NoFab Installation Direct-fit installation ensures that all major drivetrain components remain in their exact factory positions. Engine height, 1/2” offset, and setback are the same as stock, requiring no additional hood clearance or modification to the firewall or transmission tunnel. Two mounting styles of anti-roll bars are available. The standard rear-mount anti-roll bar has the same forward clearance as the stock Chevy II clip. Optional splinedend, forward-mount anti-roll bar attaches under the front frame rails, forward of the rack and pinion to provide approximately two more inches of forward pan clearance. Hub-to-hub width has been narrowed to 57”, and front axle centerline has moved rearward 1/2” to create additional clearance between the tire and fender. Ride height is lowered approximately 1-1/2” to 2” below stock and maintains 4-1/2” of ground clearance below the suspension crossmember. An optional shock mount is available to raise the crossmember to 5-3/4”; approximately 1/2” below stock height. Additional frame, control arm, and fender clearance allows maximum tire dimensions of 25” tall by 9” wide, and wheels 8” wide with 4-1/2” backspacing. Acceptable sizes include 225/5016, 225/45‑17, 225/40-18, 225/35-19, and 225/30-20. Note: Fender lips may need to be rolled for proper clearance. E Email: [email protected] E Web: CAChassisworks.com 9 HOME Chevy II g-Machine Subframe System Fabricated Subframe with Integrated g-Machine Crossmember ◾ g-Machine Subframe Welded Assembly Our completely enclosed, welded subframe structure uses multiple sizes of mandrel-bent, boxed-steel tubing with fabricated components to optimize strength in key areas without unnecessarily adding weight or decreasing clearance for engine and exhaust components; this is a result not possible with simple straight-tube designs. Between the lower subframe mounting plate and g-Machine suspension crossmember, 4 x 2 x .120”-wall tubing is used to substantially increase stability and strength, enabling better control of engine torque and chassis flex than other 3 x 2” designs. Forward of the crossmember, 3 x 2 x .120”-wall tubing is reinforced by a fabricated frame horn, which broadens width to 3.25”, provides additional walls to greatly strengthen the forward-strut Gemini connector attachment area, and houses the bumper-bracket weld nuts. Enclosing the frame horns and bridging the two rails together is the radiator-core-support crossmember. The factory core-support panel and grille center support simply bolt to the folded crossmember, improving upon the strength and quality of the OEM sheetmetal component. Subframe rails, suspension crossmember, and various mounts are positioned and welded in a fixture. The final fixture welding of the subassemblies ensures that firewall, motor, bumper, and core-support mounts are perfectly positioned for a trouble-free installation. Completed base subframe assemblies are shipped as bare steel with sanded corner welds, ready for paint or powder coating. High-Clearance Forward Struts Utilizes Factory Mounting Locations Bent-Tube, Billet-Component Crossmember Secondary RadiatorSupport Crossmember Specially Reinforced Frame-Rail Section Gemini Connector ◾ High-Clearance Forward Struts Tubular struts between the factory upper firewall mount and welded-subframe’s Gemini connector triangulate the front clip, virtually eliminating chassis deflection forward of the firewall. Firewall-mount plates can be used with both 1962-65 or 1966-67 bolt patterns, and they utilize shims to 10 E facilitate body panel alignment. Strut tubes are a stout 1-5/8 x .134”-wall and feature multiple mandrel bends to route the tubes tightly along the inner fender, providing more clearance around the engine than other designs. Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Chevy II g-Machine Subframe System ◾ Gemini Connector System Our in-house-engineered Gemini system is used to connect Female Tube Adapter the strut to the subframe, enabling an easy-to-assemble, precision slip-fit joint that is substantially stronger than a welded joint. A broad-based, grooved, male connector is precisely positioned using slot-tab technology and then spray-arc welded to a specially reinforced area of the forward subframe rail. The female tube adapter, welded to Male Connector the end of the forward struts, features a dual-split-clamp design that locks around the male stem with the aid of two 5/16” socket-head cap screws. Once assembled, the Gemini connector system exerts a 1-1/8”-wide band of clamping force completely around the male stem and firmly seats the 5/16” fasteners against the compression groove as the female adapter is drawn closed. Laboratory-conducted, destructive tests have shown that the tube itself will fail prior to damaging the Gemini connector components. Chamfered Tube-Weld Area Fastener Counterbore Dual-Split Clamp Design 5/16” Fasteners Chamfered Base-Weld Area ◾ 4 x 2” g-Machine Crossmember Bent-tube, billet-component crossmembers are a completely closed, rigid structure with greater strength and resistance to bending and twisting than other designs. Formed from a single piece of 4 x 2 x .120” steel tubing, large-radius mandrel bends are placed at each end to distribute loads throughout the crossmember, eliminating fatigue points at critical areas. Slots for the billet-mount tabs are machined in a horizontal machining center with dedicated fixturing to guarantee correct component geometry, ensuring the suspension moves as designed. ◾ Interlocking-Slot-Tab Technology Self-fixturing female slots used with machined male tabs provide an interlocking assembly method that enables A-arm, rack and pinion, and shock mounts to be accurately positioned in all axes. This guarantees the suspension will perform as designed. Noninterlocking designs are not nearly as accurate after welding. Superior spray-arc welding process produces the best weld penetration with excellent appearance. Billet rack-and-pinion mount inserts into machined slot on crossmember. E Email: [email protected] E Web: CAChassisworks.com 11 HOME Chevy II g-Machine Subframe System ◾ Billet Steel A-Arm Mounts Billet steel, CNC machining allows us to create A-arm mounts with specific areas of increased thickness for added strength not possible with other designs. Unlike slot- or eccentric-mounted A-arms, Chassisworks’ exclusive fixed-axis pivot-pin design eliminates the possibility of shifting pivot shafts, provides greater shear strength, and increases bending resistance. Threaded bosses at each end of the mount enable use of set screws to lock A-arm pivot pins into position. Using slot-tab technology, billet upper A-arm mounts snap and weld into place providing anti-dive geometry and capping the open ends of the 4 x 2” crossmember to better distribute forces, decrease flex throughout the structure, and provide a solid location for the upper shock mount. The lower A-arm mount is a single-piece component passing directly through the crossmember and supported by the anti-roll-bar mounting plate to distribute bending forces throughout the crossmember. This increases rigidity and geometric accuracy of the control arm for more predictable handling. Single-Piece Billet Lower A-Arm Mount Anit-Roll Bar Mount Plate ◾ One-Piece Clevis Shock Mount Our g-Machine upper shock mount has a 1-5/16”-wide formed clevis that accepts 1/2” mounting hardware and provides adequate clearance for use with VariShock coil-overs or ShockWave™ air suspension. Our onepiece design has an integrated gusset across the top and sides to bridge the billet upper A-arm mount to the 4 x 2” crossmember. This provides a larger, more stable mount base, with better appearance than welded designs, and eliminates bending fatigue possible with common sheet metal- or tubing-mounted designs of other manufacturers. ◾ Billet Rack Mounts and Clamps Billet steel rack mounts using dual slot-tab technology form an interlocking bridge between the 4 x 2” crossmember and billet aluminum rack brackets. The angled mount fixture welds to a 4 x 2” crossmember, attaching to the rack body at the widest points. This allows positioning of the rack above the bottom of the crossmember, safe from road hazards. Billet aluminum rack clamps attach into interlocking grooves Slot-Tab Technology, Interlocking Joint in the rack gearbox, preventing flex in hard cornering unlike rubber-mounted designs. This also allows rotation of the input shaft to aid steering-shaft installation around engine obstacles and the exhaust system. Pinion Rotated Up 12 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 Pinion Rotated Down HOME Chevy II g-Machine Subframe System ◾ Detailed Installation Guide Included with each g-Machine Chevy II subframe is a painstakingly detailed 126-page installation guide. The guide features over 300 individual photos completely illustrating the installation process at each and every step. Beginning with clip assembly, continuing on with removal of factory components, and ending with final installation, our comprehensive guide makes installation and setup an uncomplicated task. ◾ Alignment Shims To simplify subframe alignment in relation to the body, the OEM shim alignment method is also used on the g-Machine subframe. Note that not all replacement subframes on the market have this important feature. A set of CNC-laser-cut alignment shims is supplied to make subframe installation simple and highly accurate. ◾ Engine-Mount Options Multiple engine-mount-bracket options enable true bolt-in installation for nearly any drivetrain. Standard side-mount brackets for small-block, big-block, and LS-style V8 engines are available, as well as small- or big-block motor plates and mid plates for more serious performance applications. To positively locate the engine, driver-side motor-plate, mid-plate, and side-mount frame brackets have correct-sized bolt holes. Passenger-side mounts use slightly oversized slots to facilitate installations with minor chassis variances. Subframes ship with all mounts factorywelded and ready for installation. Frame Engine-Mount Options NO ENGINE BRACKETS INSTALLED SIDE ENGINE BRACKETS ONLY SMALL-BLOCK MOTOR-PLATE BRACKETS ONLY BIG-BLOCK MOTOR-PLATE BRACKETS ONLY SIDE ENGINE BRACKETS WITH SMALL-BLOCK MOTOR PLATE SIDE ENGINE BRACKETS WITH BIG-BLOCK MOTOR PLATE SMALL-BLOCK MOTOR PLATE WITH BIG-BLOCK MOTOR PLATE SPLINED ANTI-ROLL BAR PLATES WITH SIDE ENGINE MOUNTS Clutch Pivot-Shaft Bracket Mount ◾ Clutch Pivot-Shaft Bracket Mount A factory-welded bracket along the driver-side frame rail is used to mount the OEM outer clutch pivot-shaft bracket in the factory position. E Email: [email protected] E Web: CAChassisworks.com 13 HOME Value Subframe System Package ◾ UPDATED ◾ VALUE SYSTEM Includes: subframe clip, control arms with balljoints, spindles, billet manual rack, tie rods, and billet coil-overs with springs ◾ Value Systems 7700-1 VALUE SYSTEM FOR 62-67 CHEVY II/NOVA ◾ Value System Options OPTIONS HOOD HINGE MOUNTS AND INNER FENDER PANELS SUBFRAME G-CONNECTOR SYSTEM (OUTSIDE FRAME CONNECTORS, CENTER CONNECTOR SUPPORT) SIDE ENGINE MOUNTS, BILLET-ALUMINUM (CHEVY V8 OR LS - BARE, ANODIZED, OR POLISHED - SOCKET HEAD OR POLISHED SPUD HARDWARE) STREET-MACHINE A-ARMS AND ANTI-ROLL BAR (BARE STEEL OR BLACK POWDER COAT FINISH - ANTI-ROLL BAR) MANUAL RACK AND PINION, SATIN FINISH (STEERING SHAFT AND U-JOINTS) SHOCKS (FIXED, SINGLE-, OR DOUBLE-ADJUSTABLE VALVING) SPRING RATES (500, 550, 600, 675, OR 750 LB/IN) BRAKES, 11-3/4" ROTORS, BLACK 4-PISTON CALIPER (BARE OR BLACK E-COATED ROTOR FINISH) NOTE: Refer to the Custom-Fit Chassis System section of this catalog for a closer look at individual suspension and steering components. 14 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Option Subframe System Package ◾ UPDATED ◾ OPTION SYSTEM Includes: subframe clip, control arms with balljoints, spindles, rack and pinion, tie rods, and billet coil-overs with springs ◾ Option Systems 7700-2 OPTION SYSTEM FOR 62-67 CHEVY II/NOVA ◾ Option System Options OPTIONS HOOD HINGE MOUNTS AND INNER FENDER PANELS SUBFRAME G-CONNECTOR SYSTEM (OUTSIDE FRAME CONNECTORS, CENTER CONNECTOR SUPPORT) SIDE ENGINE MOUNTS, BILLET-ALUMINUM (CHEVY V8 OR LS - BARE, ANODIZED, OR POLISHED - SOCKET HEAD OR POLISHED SPUD HARDWARE) CONTROL ARMS AND HARDWARE (STREET-MACHINE ARMS: BARE, BLACK, OR POLISHED STAINLESS; OR G-MACHINE ADJUSTABLE ARMS - STAINLESS BALLJOINT CAPS) RACK AND PINION (MANUAL: SATIN OR POLISHED FINISH - POWER: BLACK OR CHROME; LEFT- OR RIGHT-HAND DRIVE - STEERING SHAFT AND U-JOINTS) SHOCKS (FIXED, SINGLE-, OR DOUBLE-ADJUSTABLE VALVING - POLY OR COM-8 EYES - COIL-OVER OR AIR-SPRING SHOCKS) SPRING RATES (500, 550, 600, 675, OR 750 LB/IN) ANTI-ROLL BAR AND SPINDLES (3/4", 1", 1-1/4" SOLID OR 1-1/4" SPLINED GUN-DRILLED - BARE OR BLACK POWDER COATED SPINDLES) BRAKES AND BILLET HUB (11-3/4" BARE OR 11-3/4", 13" OR 14" BLACK ROTORS - SATIN OR POLISHED HUB) NOTE: Refer to the Custom-Fit Chassis System section of this catalog for a closer look at individual suspension and steering components. E Email: [email protected] E Web: CAChassisworks.com 15 HOME Pro-Touring Subframe System Package ◾◾UPDATED ◾ ULTIMATE PRO-TOURING SYSTEM Includes: subframe, g-Machine arms, aluminum spindles, power rack and pinion, tie rods, and billet coil-overs with springs ◾ Ultimate Pro-Touring Systems 7700-3 ULTIMATE PRO-TOURING SYSTEM FOR 62-67 CHEVY II/NOVA ◾ Ultimate Pro-Touring System Options OPTIONS HOOD HINGE MOUNTS AND INNER FENDER PANELS SUBFRAME G-CONNECTOR SYSTEM (OUTSIDE FRAME CONNECTORS, CENTER CONNECTOR SUPPORT) SIDE ENGINE MOUNTS, BILLET-ALUMINUM (CHEVY V8 OR LS - BARE, ANODIZED, OR POLISHED - SOCKET HEAD OR POLISHED SPUD HARDWARE) STAINLESS BALLJOINT CAPS RACK AND PINION FINISH AND COLUMN COMPONENTS (BLACK OR CHROME - LEFT- OR RIGHT-HAND DRIVE - STEERING SHAFT AND U-JOINTS FOR OEM OR IDIDIT COLUMN) SHOCKS AND HARDWARE (SINGLE-, DOUBLE- OR REMOTE RESERVOIR 4-WAY-ADJUSTABLE VALVING - COIL-OVER OR AIR-SPRING SHOCKS) SPRING RATES (500, 550, 600, 675, OR 750 LB/IN) BRAKES (14" OR 15" ROTORS - BLACK OR RED 6-PISTON CALIPERS - THERMLOC 6-PISTON CALIPERS) NOTE: Refer to the Custom-Fit Chassis System section of this catalog for a closer look at individual suspension and steering components. 16 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Drag Race Subframe System Package ◾ UPDATED ◾ DRAG RACE SYSTEM Includes: subframe clip, control arms with balljoints, spindles, billet manual rack, tie rods, and billet coil-overs with springs ◾ Drag Race Systems 7700-4 DRAG RACE SYSTEM FOR 62-67 CHEVY II/NOVA ◾ Drag Race System Options OPTIONS ENGINE MOUNT FRAME BRACKETS (V8 OR LS SIDE MOUNTS - MOTOR PLATE) SUBFRAME G-CONNECTOR SYSTEM AND FRAME SANDING (OUTSIDE FRAME CONNECTORS, CENTER CONNECTOR SUPPORT SANDED FRAME WELDS) MOTOR MOUNTS AND PLATES (V8 OR LS BILLET SIDE MOUNTS - SMALL BLOCK, BIG BLOCK, OR LS MOTOR PLATE - AUTOMATIC OR LAKEWOOD MID PLATE FOR CHEVY OR PONTIAC) HOOD HINGE MOUNTS AND INNER FENDER PANELS STREET-MACHINE A-ARMS AND SPINDLES (BARE OR BLACK POWDER COATED ARMS - DROPPED SCULPTED OR LIGHTWEIGHT FABRICATED SPINDLE) MANUAL RACK & PINION AND COLUMN (OEM SHAFT COMPONENTS, WELD-IN RACE COLUMN WITH QUICK-RELEASE HUB) EXTENDED 5" TRAVEL COIL-OVER SHOCKS (SINGLE OR DOUBLE ADJUSTABLE) SPRING RATES (250, 300, 350, 400, 450, OR 500 LB/IN) BRAKES (MEDIUM-DUTY SLOTTED OR HEAVY-DUTY DRAG-RACE BRAKES) NOTE: Refer to the Custom-Fit Chassis System section of this catalog for a closer look at individual suspension and steering components. E Email: [email protected] E Web: CAChassisworks.com 17 HOME Inner Fender Panels ◾ Fender Supports with Hood-Hinge Mounts Our exclusive steel fender supports feature built-in, weld-nutequipped, hood-hinge mounts for ease of installation, and they have a specially curved top flange that enables bolt-on installation of factory hood hinges and fenders without distorting the fender, which is unavoidable with flat-flange designs. Chassisworks is the only company to offer fender supports at this level of quality and fit, due to the complication in designing and accurately manufacturing the component. Supports are laser-cut from steel to nearly twice the OEM thickness, receive multiple bends on our fully automated fabrication press, and are spray-arc welded, ground, and powder-coated silver, completing the engine compartment’s finished appearance. 6650 6652 6651/6653 6654/6655 ◾ Aluminum Inner Fender Panels To provide a clean, finished appearance and prevent debris from entering the engine compartment, high-quality, aluminum, inner fender panels with durable rubber splash flaps and stainless-steel hardware are available. Panels bolt directly to the g-Machine welded subframe, upper fender support, and factory core-support panel. The panel ◾◾‘62-65 Chevy II edge closest to the firewall is specially designed for 6650 UPPER FENDER SUPPORTS WITH HINGE MOUNTS (PAIR) a close fit and is specific to 1962-65 (P/N 6651) and 6651 INNER FENDER PANELS, “CHASSISWORKS” EMBOSSED (PAIR) 6654 INNER FENDER PANELS, BLANK (PAIR) 1966-67 (P/N 6653) models. Panels are available with or without embossed Chassisworks logo and ship ◾ ‘66-67 Chevy II with a protective PVC-film coating that easily peels 6652 UPPER FENDER SUPPORTS WITH HINGE MOUNTS (PAIR) off just prior to final installation. Rubber splash flaps 6653 INNER FENDER PANELS, “CHASSISWORKS” EMBOSSED (PAIR) use included stainless hardware to fasten to the inner 6655 INNER FENDER PANELS, BLANK (PAIR) fender, establishing an easily replaceable seal that fits NOTE: PACKAGE PRICING AVAILABLE AT TIME OF INITIAL (7700) SYSTEM PURCHASE. neatly around the suspension components. 18 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Billet Side Motor Mounts of GM engines. The steel-sleeved, urethane bushing with 1/2” through-bolt design creates an inseparable mount with significant vibration reduction compared to solid mounts. Mount kits include all hardware and are available with matte-anodized or polished finish. CNC-machined, billet aluminum side motor mounts enable bolt-on installation when used with our g-Machine crossmember, direct-fit subframes, or 2 x 2” mandrel-bent crossmember. Mounts are available with standard three-bolt pattern for Chevrolet V8 small-blocks and big-blocks and 4.3L V6s; or four-bolt version to accommodate the modern LS‑series CNC-Machined Billet Aluminum Construction Countersunk Fasteners Optional Polished Finish Polished Finish LS-Series (6007-X) Polyurethane Bushings GM Side Mount (6055-X) 6007-1 6007-0 6007-1 6007-2 6055-0 6055-1 6055-2 Optional Polished Spud Hardware 6055-1 6007-2 BILLET ALUMINUM, CHEVROLET SIDE MOUNT, LS SERIES, BARE FINISH BILLET ALUMINUM, CHEVROLET SIDE MOUNT, LS SERIES, MATTE FINISH BILLET ALUMINUM, CHEVROLET SIDE MOUNT, LS SERIES, POLISHED FINISH BILLET ALUMINUM, CHEVROLET SIDE MOUNT, SB, BB, V6, BARE FINISH BILLET ALUMINUM, CHEVROLET SIDE MOUNT, SB, BB, V6, MATTE FINISH BILLET ALUMINUM, CHEVROLET SIDE MOUNT, SB, BB, V6, POLISHED FINISH ◾ Motor-Mount Spud Hardware (Optional) Specially designed, CNC-machined, polishedstainless-steel mounting hardware is optionally available for use with our billet aluminum side motor mounts. Male and female fasteners feature matching Allendrive, beveled heads for simple installation and excellent appearance. Once tightened against each other, fasteners form a full-length shank with no external threads, providing higher shear strength than standard bolts and correct bushing preload. Socket-Head Fasteners 3046 E 6055-2 SPUD HARDWARE SET, CHEVROLET SIDE MOUNT, POLISHED Email: [email protected] E Web: CAChassisworks.com 19 HOME Bolt-In Motor Plates Recommended for high-horsepower applications, smallor big-block Chevy V8 motor plates bolt onto optionally installed Camaro or Chevy II g-Machine subframe brackets to position the engine in the factory location and provide additional clearance directly underneath the exhaust ports. Motor plates are .250”-thick 6061-T6 aluminum and feature CNC-profile-machined mounting holes, water passages, and outside edges with no trimming or notching required. Driver-side mounting holes positively locate the engine, while passenger-side slots facilitate installation with minor chassis variances. By directly coupling the front block face to the chassis, acceleration response and torque capacity are greatly increased without over-stressing the sidewalls of the engine block. When used with our optional mid plate, the motor plate also improves chassis rigidity by utilizing the engine block as a stress member. Motor plates are .250”-thick, profile-milled, 6061-T6 aluminum and ship with mounting hardware. Motor-plate brackets are factory fixture-welded during subframe assembly, ensuring consistent and accurate engine placement. ◾ Improves acceleration response and torque capacity ◾ Direct bolt-on installation ◾ Lightweight, .250”-thick, 6061‑T6 aluminum ◾ Precision CNC profile-machined features 6061 6056 6080 6061 6057 20 E BOLT-IN MOTOR PLATE, SMALL-BLOCK V8, ‘62-67 CHEVY II BOLT-IN MOTOR PLATE, LS-BLOCK V8, ‘62-67 CHEVY II LS ENGINE A/C BOSS ADAPTER MOUNTS FOR MOTOR PLATE BOLT-IN MOTOR PLATE, BIG-BLOCK V8, ‘62-67 CHEVY II Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Bolt-In Mid Plates Recommended for moderate- to high-horsepower applications, mid plates easily bolt to stock or g-Machine-equipped 1962-67 Chevy II/ Novas. Once installed, our unique Chevy II adapter system enables mid-plate removal without disassembling the main subframe joint. By directly coupling the rear block face to the chassis, acceleration response and torque capacity are greatly increased without over-stressing the sidewalls of the engine block. When used with our optional motor plate, the mid plate also improves chassis rigidity by utilizing the engine block as a stress member. Mid plates are CNC-laser-cut, .134”-thick, zinc-plated steel with no trimming or notching required for installation. Driver-side mounting holes positively locate the engine, while passenger-side slots facilitate installations with minor chassis variances. Hardware required to mount mid plate to frameadapter brackets is included. Note: Chevy II mid plates mount to inner holes of factory main subframe joint. Kits include frame-adapter brackets, enabling the mid plate to be removed and reinstalled without disrupting the main subframe joint. ◾ Improves acceleration response and torque capacity ◾ Direct bolt-on installation ◾ Sturdy, .134”-thick, zinc-plated steel ◾ Precision CNC laser-cut features ◾ Versions for automatic transmissions and clutch-equipped vehicles with Lakewood scattershield 6058 BOLT-IN MID PLATE, AUTOMATIC, CHEVY II ‘62-67 (OEM OR G-MACHINE SUBFRAME) 6059 6081 BOLT-IN MID PLATE, LAKEWOOD, CHEVY II ‘62-67 (OEM OR G-MACHINE SUBFRAME) MID-PLATE V8 TO LS ADAPTER (G-MACHINE SUBFRAME ONLY) E Email: [email protected] E Web: CAChassisworks.com 21 HOME H Shock-System Options ◾ VARISHOCK COIL-OVER SHOCKS VariShock coil-overs provide an advanced level of tuning for both performance and street vehicles. Variable shock valving gives you up to 256 different combinations of “instant adjustment” by simply turning the adjustment knobs to one of 16 detents. The threaded lower spring enables fine tuning of ride height, shock-travel balance, and corner weighting without affecting spring rate. ◾ Poly-Eye Coil-Over Shocks, 4.25" Travel (Street, Pro-Touring) VAS 11022-425 VARISHOCK POLY-EYE COIL-OVER, SENSISET FACTORY-VALVED, 4.25" TRAVEL (PAIR) VAS 11122-425 VARISHOCK POLY-EYE COIL-OVER, QUICKSET 1 SINGLE-ADJUSTABLE, 4.25" TRAVEL (PAIR) VAS 11222-425 VARISHOCK POLY-EYE COIL-OVER, QUICKSET 2 DOUBLE-ADJUSTABLE, 4.25" TRAVEL (PAIR) USES 9" COIL SPRINGS NOTE ◾ Bearing-Eye Coil-Over Shocks, 4.25" Travel (Street, Pro-Touring, Open Track) VAS 11011-425 VARISHOCK BEARING-EYE COIL-OVER, SENSISET FACTORY-VALVED, 4.25" TRAVEL (PAIR) VAS 11111-425 VARISHOCK BEARING-EYE COIL-OVER, QUICKSET 1 SINGLE-ADJUSTABLE, 4.25" TRAVEL (PAIR) VAS 11211-425 VARISHOCK BEARING-EYE COIL-OVER, QUICKSET 2 DOUBLE-ADJUSTABLE, 4.25" TRAVEL (PAIR) VAS 11411-43 VARISHOCK BEARING-EYE REMOTERESERVOIR COIL-OVER, QUICKSET 4 4-WAY-ADJUSTABLE, 4.25" TRAVEL (PAIR) NOTE USES 9" COIL SPRINGS ◾ Bearing-Eye Coil-Over Shocks, 5.15" Travel (Street/Strip, Drag Race) VAS 1111R-52 VAS 1121R-52 NOTE 22 E VARISHOCK BEARING-EYE COIL-OVER (DRAG RACE) QUICKSET 1 SINGLE-ADJUSTABLE, 5.15" TRAVEL (PAIR) VARISHOCK BEARING-EYE COIL-OVER (DRAG RACE) QUICKSET 1 SINGLE-ADJUSTABLE, 5.15" TRAVEL (PAIR) USES 12" COIL SPRINGS Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Shock-System Options ◾ VARISPRING COIL-SPRINGS VariSprings are manufactured using a new high-tensile wire, which is stronger than the chrome-silicon wire used by other manufacturers. Since this wire can flex more than conventional chrome-silicon wire, we can wind VariSprings with a coarser pitch that reduces weight and increases the spring’s travel. ◾ 12" Coil-Springs ◾ 9" Coil-Springs VAS 21-09200 VAS 21-09240 VAS 21-09275 VAS 21-09300 VAS 21-09350 VAS 21-09400 VAS 21-09450 VAS 21-09500 VAS 21-09550 VAS 21-09600 VAS 21-09675 VAS 21-09750 9” LENGTH, 200 LB/IN 9” LENGTH, 240 LB/IN 9” LENGTH, 275 LB/IN 9” LENGTH, 300 LB/IN 9” LENGTH, 350 LB/IN 9” LENGTH, 400 LB/IN 9” LENGTH, 450 LB/IN 9” LENGTH, 500 LB/IN 9” LENGTH, 550 LB/IN 9” LENGTH, 600 LB/IN 9” LENGTH, 675 LB/IN 9” LENGTH, 750 LB/IN VAS 21-12080 VAS 21-12095 VAS 21-12110 VAS 21-12130 VAS 21-12150 VAS 21-12175 VAS 21-12200 VAS 21-12250 VAS 21-12300 VAS 21-12350 VAS 21-12400 VAS 21-12450 VAS 21-12500 VAS 21-12550 VAS 21-12600 VAS 21-12650 12” LENGTH, 80 LB/IN 12” LENGTH, 80 LB/IN 12” LENGTH, 110 LB/IN 12” LENGTH, 130 LB/IN 12” LENGTH, 150 LB/IN 12” LENGTH, 175 LB/IN 12” LENGTH, 200 LB/IN 12” LENGTH, 250 LB/IN 12” LENGTH, 300 LB/IN 12” LENGTH, 350 LB/IN 12” LENGTH, 400 LB/IN 12” LENGTH, 450 LB/IN 12” LENGTH, 500 LB/IN 12” LENGTH, 550 LB/IN 12” LENGTH, 600 LB/IN 12” LENGTH, 650 LB/IN ◾ VARISHOCK AIR-SPRING SHOCKS The VariShock air-spring suspension enables rapid changes in ride height when used with one of the various compressor control systems — perfect for street rods. Air suspension provides smooth, comfortable ride quality, but the VariShock's built-in adjustable valving allows the system to be tuned for enhanced performance. VAS 131H2-425 VAS 132H2-425 NOTE VARISHOCK AIR SPRING, QUICKSET 1 SINGLEADJUSTABLE, POLY EYES (PAIR) VARISHOCK AIR SPRING, QUICKSET 2 DOUBLEADJUSTABLE, POLY EYES (PAIR) AIR-MANAGEMENT SYSTEM REQUIRED FOR OPERATION E Email: [email protected] E Web: CAChassisworks.com 23 HOME H VariShock Accessories ◾ Spring-Seat Thrust Bearings Thrust bearings are used at the lower spring seat to reduce friction when adjusting ride height. New stainless “cap-style” seats, a VariShock exclusive, enclose the thrust bearing to keep dirt out. VAS 513-101 VAS 513-100 SPRING SEAT THRUST BEARING SET, ORIGINAL STYLE SPRING SEAT THRUST BEARING SET, DUST-SHIELD STYLE ◾ Spanner Wrench VariShock's exclusive spanner wrench, incorpo­rates four tangs, which engage the lower spring seat in four places, preventing accidental slips. 899-012-201 VARISHOCK SPANNER WRENCH, PLATED STEEL ◾ Coil-Over Spring Compressor The VariShock coil-over-spring compressor greatly eases lower-spring-collar adjustment on high-preload or high-rate applications. Heavy-duty plates at each end fit 2-1/2” insidediameter coil springs of 130 lb., rate or greater, with a maximum spring height of 14”. VAS 200 COIL-OVER SPRING COMPRESSOR FOR 2-1/2” SPRINGS Coil-spring not included ◾ Shock Extended Eye Increasing vehicle ride height without disrupting the correct balance of shock travel has never been simpler. Our direct-replacement, billet-aluminum shock mounts feature a 1” extended body, and reuse your existing VariShock polyurethane bushings. Mounts simply screw onto the top of the shock’s piston rod and are secured by a jam nut. Extended eyes can be used with any VariShock coilover shock to raise ride height. Proper suspension travel and clearance must be verified prior to installation. Poly bushings and sleeves not included. VAS 512-1-2 VAS 512-2-2 24 E 1"-EXTENDED TOP SHOCK EYE, COM-8 (PAIR) 1"-EXTENDED TOP SHOCK EYE, POLY (PAIR) Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME VariShock Air-Spring Shocks VariShock air-spring shocks are a unique product line that combines VariShock adjustable-valve shocks with air-springs. Our double-adjustable shock unit gives you complete ride control as well as adjustable ground clearance. There are two styles of inlet port: the original style is in the spring cap; the new style is in the upper mounting eye. For the ultimate in driving performance and ride-height adjustability, we recommend the VariShock air-spring shocks. We even designed-in trouble-free installation! We made the diameter of the upper-air-bellows mount significantly smaller. We also extended the mounting eyes and machined them both to increase clearance and to incorporate the air-inlet fitting. A full range of travel lengths covers front- and rear-suspension applications. Choose from single-adjustable QuickSet 1 or double-adjustable QuickSet 2 models. Urethane bushings are standard, top and bottom. ◾ Adjustable QuickSet Series The VariShock QuickSet series allows you to easily tune your suspension for improved cornering and acceleration traction, or to quickly adapt to current track conditions. Adjustment takes only a few seconds and is made with the VariShock installed on the vehicle. Readily accessible, 16-position adjustment knobs can be operated by hand or with the aid of a common allen wrench. The QuickSet 1 valve system features a single adjustment knob that controls overall damping stiffness of the shock. Knobs are clearly etched indicating the correct direction of rotation to decrease (-), or increase (+) damping stiffness. There are a total of 16 specific adjustment positions. The QuickSet 2 valve system features dual adjustment knobs that independently control bump- and rebound-damping stiffness of the shock. Dual-arrow symbols engraved into the shock body demonstrate the function of each knob. Arrows pointing toward each other designate bump (compression) adjustment; the shock collapsing. Arrows pointing away from each other represent rebound (extension) adjustment; the shock extending. There are 16 specific adjustment positions for each knob, with a total of 256 unique combinations possible. Each adjustment position is indicated by a detent that can be felt when turning the knob, and an audible click as the knob gently locks into position. Only very light force is necessary to rotate the knob past each detent. ◾ Front - Dual Poly-Eye, 6-1/2" Double-Convoluted with Eye Port ▪ Upper Mount: Poly-urethane eye, 1/2" or 5/8" hardware with 1-1/4" clevis ▪ Lower Mount: Poly-urethane eye, 1/2" or 5/8" hardware with 1-1/4" clevis ▪ Heavy Capacity: Recommended to support engine weight PART NUMBER VALVING TRAVEL VAS 131H2-425 VAS 132H2-425 SINGLE DOUBLE 4.10" 4.10" COLLAPSED LENGTH 10.45" 10.45" EXTENDED LENGTH 14.55" 14.55" E RIDE-HEIGHT MINIMUM 11.27" 11.27" RIDE-HEIGHT MAXIMUM 13.73" 13.73" Email: [email protected] E Web: CAChassisworks.com 25 HOME Air Management ◾ AirPod™ Self-Contained Compressor Systems A completely self-contained compressor system, AirPod™ by Air Ride Technologies, conveniently mounts the tank, compressor(s), and valve set on one easily installed plate, eliminating tedious wiring and plumbing. AirPods™ are available in single-compressor 3-gallontank, or dual-compressor 5-gallon-tank versions with RidePro or LevelPro control systems. ◾ Factory wired, plumbed, and tested ◾ Four simple air-line connections ◾ Three electrical connections ◾ Saves 10 – 15 hours of installation time ◾ Compact size for easy installation ◾ Light weight aluminum tank ◾ Entire unit mounts with only four bolts ◾ CALL FOR INFO 26 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Street-Machine A-Arms ◾ Street-Machine Upper A-Arms shank to thread directly into the A-arm welded assembly and are secured by jam nuts. This enables highly accurate caster and camber adjustment (approx. 1/8-degree increments) without shims and eliminates the possibility of shifting alignments, which is common with slotand eccentric-adjusted arms. Chassisworks’ Street-Machine upper A-arms are constructed from mandrel-bent 7/8 x .156”-wall steel tubing that is TIG-welded to form an open design, allowing clearance for VariShock coil-overs or larger-bodied ShockWave™ air suspension. Our designed suspension system geometry provides positive caster upon installation by offsetting the balljoint rearward, but it can also be further adjusted to compensate for body rake or driver preference. Bearing eyebolts, CNC-machined from steel billets, feature a 5/8” ◾ Street-Machine Lower A-Arms It also places the shock very close to the spindle in a dropped position for better control with lighter-rate springs and decreased space requirements at the top end of the shock. Lower A-arms pivot points are spread broadly apart, greatly increasing performance while eliminating the need for secondary strut rods. Chassisworks’ Street-Machine lower A-arms are efficiently designed so that each component contributes to the arm’s overall strength and stability. The arms feature 1 x .156”-wall steel tubing, TIG-welded construction and a bracing cross-tube and multiple triangulating gussets consisting of two shockmount plates and the anti-roll-bar urethane-bushing end-link mount. CNC-machined weld eyes create a stable bushing housing that inserts into each arm tube and gradually tapers to match the outer tubing diameter. This design eliminates fatigue points normally found in other “T”-style tubular bushing-housing joints. Our designed suspension geometry offsets the balljoint forward to improve static positive caster. ◾ Polished Stainless-Steel A-Arms Arms shown with optional billet balljoint covers 6179 6180 6179 6180 POLISHED-STAINLESS UPPER ARMS WITH POLISHEDSTAINLESS HARDWARE (BALLJOINTS INCLUDED) POLISHED-STAINLESS LOWER ARMS WITH POLISHED STAINLESS HARDWARE (BALLJOINTS INCLUDED) E Email: [email protected] E Web: CAChassisworks.com 27 HOME Street-Machine A-Arms ◾ Black Powder-Coated Steel A-Arms Arms shown with optional billet balljoint covers 6181 BLACK MILD-STEEL UPPER ARMS, PLATED MILDSTEEL HARDWARE (BALLJOINTS SEPARATE) BLACK MILD-STEEL UPPER ARMS, POLISHEDSTAINLESS HARDWARE (BALLJOINTS SEPARATE) BLACK MILD-STEEL LOWER ARMS, PLATED MILDSTEEL HARDWARE (BALLJOINTS SEPARATE) BLACK MILD-STEEL LOWER ARMS, POLISHED STAINLESS HARDWARE (BALLJOINTS SEPARATE) 6181-SS 6182 6182-SS ◾ Bare-Finish Steel A-Arms 6171 6172 6171 6172 28 BARE MILD-STEEL UPPER ARMS, PLATED MILDSTEEL HARDWARE (BALLJOINTS SEPARATE) BARE MILD-STEEL LOWER ARMS, PLATED MILDSTEEL HARDWARE (BALLJOINTS SEPARATE) E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME g-Machine A-Arms ◾ g-Machine Upper A-Arms Chassisworks’ g-Machine upper A-arms feature billet eyebolts and double-adjustment couplers with large 3/4” male and female threads. This mechanism enables rapid and infinitely precise alignment adjustment without using shims or unbolting the A-arm from its mount. Once properly adjusted, two jam nuts lock the adjustment coupler into position and place the threads under load, securely stabilizing the joint and eliminating the possibility of shifting alignments, which is common with slot- and eccentricadjusted arms. A-arms are constructed from mandrel-bent, 1 x .156”-wall steel tubing, with 7/8 x .156”-wall cross braces, and are TIG-welded to form a rigid, triangulated design that allows clearance for VariShock coil-overs or largerbodied ShockWave™ air suspension. Our designed suspension system geometry provides positive caster upon installation by offsetting the balljoint rearward, but it can also be further adjusted to compensate for body rake or driver preference. 6152 G-MACHINE UPPER A-ARMS, BLACK MILD-STEEL ARM, PLATED MILD-STEEL AND STAINLESS-STEEL HARDWARE ◾ g-Machine Lower A-Arms Chassisworks’ g-Machine lower A-arms are the strongest, most rigid aftermarket crossmember arms available and offer rock-solid performance for even the most aggressive, wide-tired performance applications. The TIG-welded arm features massive 1-1/4 x .156”-wall steel tubing and 1 x .156”-wall, multi-plane, triangulated cross braces with integrated lower shock mount and anti-roll-bar spherical bearing end-link mount. CNC-machined weld eyes create a stable bushing housing that inserts into each arm tube and gradually tapers to match the outer tubing diameter. This design eliminates fatigue points normally found in other “T”-style tubular bushing-housing joints. Our designed suspension geometry offsets the balljoint forward to improve static positive caster. It also places the shock very close to the spindle in a dropped position for better control with lighter-rate springs and decreased space requirements at the top end of the shock. Lower A-arm pivot points are spread broadly apart, greatly increasing performance while eliminating the need for secondary strut rods. 6153 E g-Machine upper A-arms ship with zinc-plated adjuster hardware, stainless-steel pivot pins and balljoints. G-MACHINE LOWER A-ARMS, BLACK MILD-STEEL ARM, STAINLESS-STEEL HARDWARE Email: [email protected] E Web: CAChassisworks.com 29 HOME g-Machine Suspension Accessories ◾ Shock-Mount Fasteners We have three styles of shock-mount fasteners for our street-machine front suspension. The shock spuds are CNC-machined from stainless-steel billet. The maleand-female design allows the two halves to be tightened completely, providing the correct amount of crush on the shock’s urethane bushings and sleeves. The internal hex machined into the end makes tightening easy. Polished finish assures a great, longlasting appearance. Also available are stainless-steel Allen bolts or Grade-8 hex bolts. SHOCK MOUNTING HARDWARE, GRADE 8 HEX-HEAD CAP SCREWS, YELLOW ZINC SHOCK MOUNTING HARDWARE, SOCKET-HEAD CAP SCREWS, STAINLESS STEEL SHOCK MOUNTING HARDWARE, BEVELEDHEAD SPUD SET, POLISHED STAINLESS STEEL 3043 3044 3045 ◾ Shock Simulators Chassisworks’ shock simulators take the guesswork out of aligning your g-Machine front suspension system. The laser-cut steel links bolt in place of the VariShock coil-over or air spring. Simulators feature holes spaced at three different lengths to quickly secure the suspension at full compression, at ride height, and at full extension. This tool is not designed to carry the weight of the vehicle. 6712-12 12" RIDE-HEIGHT SHOCK SIMULATORS, STEEL (PAIR) ◾ Billet Balljoint Covers Polished, stainless-steel balljoint covers are available to add a show-quality finished look to any of our Street-Machine or g-Machine A-arms. Covers mount in place of the zerk fitting using flat-head stainless hardware and meet seamlessly with the A‑arms’ machined balljoint housing. 6173 BILLET BALLJOINT COVERS, POLISHED STAINLESS STEEL (PAIR) ◾ Heavy-Duty Screw-In Balljoints Sold in pairs, these premium screw-in balljoints are compatible with all Chassisworks upper and lower A‑arms. Kit includes balljoints, rubber dust boots, and hardware. 6104 SCREW-IN BALLJOINTS WITH BOOTS AND HARDWARE (PAIR) ◾ Balljoint Wrench Our zinc-plated, laser-cut steel balljoint wrench takes the hassle out of dealing with the uncommon OEM square-drive feature of screw-in balljoints. 6711 30 SCREW-IN BALLJOINT WRENCH, ZINC-PLATED STEEL E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 Fits Street-Machine and g-Machine arms HOME g-Machine Sculpted Spindles Designed for Chassisworks’ g-Machine crossmember system, our sculpted, two-piece spindle provides reliable and predictable performance for everyday street or road-handling use. Spindles feature a 2”-dropped ride height and are taller than commonly used OEM spindles, providing a lower center of gravity and a quicker camber curve for improved cornering traction. High-strength ductile iron, cast exclusively for Chassisworks by a foundry with over 50 years of spindlemaking experience, enables excellent strength-to-weight ratio through design flexibility and efficiency not possible with machined or welded designs. Specifically curved surface transitions throughout the integrated steering arm, caliper mount, and upright body were designed using state-of-theart finite element analysis (FEA) software to eliminate stress concentrations while significantly improving strength and durability. Mounting bosses and tapered bores are machined into the raw spindle castings using our fully automated, CNC horizontal machining center to ensure spindle geometry is absolutely correct. Spindle axles are machined from special high-strength alloy steel (Tensile 150,000 psi), then inserted into the machined upright forming an inseparable shrink-fit pressed assembly. Recommended brakes for use with sculpted spindles are the unvented 11-3/4” medium-duty (8336), vented 11-3/4” heavy-duty (8337), and g-Street 13” (8322) or g-Street 14” (8323) directional-vane-rotor brake kits. Spindles accept large 1.378”-inner and 0.866”-outer wheel bearings and ship with bare or black-powder-coat finish and necessary hardware. 6174 6186 6174 6186 SCULPTED SPINDLES, G-MACHINE CROSSMEMBER SYSTEM, PLAIN FINISH (PAIR) SCULPTED SPINDLES, G-MACHINE CROSSMEMBER SYSTEM, BLACK-POWDER-COAT FINISH (PAIR) Fabricated Drag-Race Spindles from adapter brackets or hardware. Geometry is borrowed from our performance-bred g-Machine sculpted spindle for proven, responsive, and predictable steering characteristics. Recommended brakes for use with fabricated spindles are unvented 11-3/4” medium-duty (8336) or vented 11‑3/4” heavy-duty (8337) kits. Spindles accept large 1.378”-inner and 0.866”-outer wheel bearings and ship with black-powder-coat finish and necessary hardware. Chassisworks offers an extremely lightweight (6.56 lb), fabricated, chrome-moly spindle for weight-sensitive, drag race g-Machines with a crossmember and skinny tires (not recommended for street use). The use of finite element analysis (FEA) software enabled selective removal of excess material to reduce weight without decreasing strength or reliability. Our final design was first computer stress-tested for durability, then thoroughly physically tested prior to production. Components are CNC-machined with interlocking features, then fixture TIG-welded to ensure broad stable contact surfaces, consistent quality welds, and correct spindle geometry. Spindle uprights are 1-1/2” x .250”-wall chromemoly tubing and provide an extremely rigid and lightweight structural base for the remaining components. Balljoint-boss material thickness is increased at the overhanging end to establish a deeper bore with a larger taper contact area. Steering arms are a stout 1/2” thick with large machined pockets and 1/2” threaded outer-tie-rod hole for use with our threaded-stud bumpsteer kit (6167). The brake caliper mount is integrated into the welded spindle assembly, simplifying installation and eliminating any additional weight 6166 E FABRICATED DRAG-RACE SPINDLES, G-MACHINE CROSSMEMBER SYSTEM, BLACK-POWDER-COAT FINISH (PAIR) Email: [email protected] E Web: CAChassisworks.com 31 HOME Drag-Race Front Brakes All the hubs, rotors and brackets in our brake kits are manufactured by Chassisworks and will fit most 15” wheels. Silver-anodized, billet-aluminum hubs are machined to accept the 1/2 x 3” wheel studs in both 4-1/2” and 4-3/4” bolt circles. Screw-on dust caps are included. For vehicles under 2400 lb., our light-duty brakes feature billet, two-piston Wilwood calipers with solid, 10”-diameter, 3/8”-thick rotors. Medium-duty brakes, for vehicles up to 2900 lb., use four-piston Wilwood calipers and solid rotors measuring 11-3/4 x 3/8”. Rotors are available with optional slots, which lighten the rotor and wipe the pads, for improved braking. ◾ Light-Duty 8335 8325 OPTION LIGHT-DUTY BRAKES (PAIR) FOR FABRICATED SPINDLE LIGHT-DUTY BRAKES (PAIR), ’71-80 PINTO/MUSTANG II SLOTTED ROTORS ◾ DynaPro billet aluminum, two-piston calipers with billet mounting bracket and pads ◾ Unvented solid or slotted rotors, .35 x 10" diameter with bare finish ◾ Billet aluminum hub, 5 on 4-1/2" and 5 on 4-3/4" bolt circles with billet dust cap, wheel bearings, and 1/2 x 3" wheel studs ◾ Medium-Duty 8336 8326 8331 8361 OPTIONS MEDIUM-DUTY BRAKES (PAIR) FOR FABRICATED SPINDLE MEDIUM-DUTY BRAKES (PAIR), ’71-80 PINTO/MUSTANG II MEDIUM-DUTY BRAKES (PAIR), CAMARO/CHEVELLE/NOVA MEDIUM-DUTY BRAKES (PAIR), ’65-66 IMPALA SPINDLE SLOTTED ROTORS POLISHED CALIPERS ◾ Dynalite forged aluminum, four-piston calipers with billet mounting bracket and pads ◾ Unvented solid or slotted rotors, .35 x 11.75" diameter with bare finish ◾ Billet aluminum hub, 5 on 4-1/2" and 5 on 4-3/4" bolt circles with billet dust cap, wheel bearings, and 1/2 x 3" wheel studs 32 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME g-Street™ - 11-3/4" - 4-Piston Chassisworks’ designed and manufactured front disc brake kit features fixed, fourpiston, forged-aluminum Wilwood calipers and 11.75 x .81” vented rotors with integrated hats and billet aluminum hubs. The bolt-together hub and rotor assembly allows worn or damaged components to be replaced easily and economically. Rotors are uncoated and feature a slot-grooved abrasion surface to wipe the pads free of debris, reduce pad float if overheated, and enhance appearance. Our enhanced-friction ceramic-formula brake pads provide smooth engagement and long service life, with low noise and brake-dust levels for performance driving applications. The kit is designed for use with g‑Machine fabricated or sculpted spindles, or applications listed below and requires 15” or larger wheels. ◾ Forged Dynalite Caliper Wilwood’s Forged Dynalite (FDL) four-piston, aluminum, lug-mount caliper is used for its light weight (4.06 lb), superior rigidity, and enhanced braking performance and pedal feel. The calipers use a closed-end, internal fluid passage design that is further strengthened by four steel bridge bolts extending through the caliper body. Stress flow forging and smooth surface transitions help eliminate stress points and reduce overall caliper deflection. FDL calipers use one-piece, 1.75”-diameter, stainless-steel pistons and high-temperature, square-faced bore seals. Stainless steel slows heat transfer to the brake fluid and improves the system’s resistance to heat-induced pedal fade. This reduction in heat also increases the service life of the fluid and seals. The four individual pistons apply pressure against both sides of the rotor. Caliper fluid requirements are matched to the output capabilities of commonly used factory master cylinders, ensuring comfortable performance in a wide range of applications. The Dynalite calipers are trouble-free and service-friendly. Vibration-dampening stainless-steel bridge-plate inserts protect the caliper body from wear caused by pad movement, greatly extending service life. Two-piece bleed screws are easily accessed at each corner of the caliper body and eliminate direct wear to the aluminum body. Brake pads are also easily changed by simply removing the retaining pin and sliding the pads out. ◾ High-Performance Rotors The kit comes standard with vented, slot-grooved-surface rotors measuring 11.75 x .81”. Rotors are available bare uncoated or with black E-coat finish and feature an integrated raised hat, increasing heat capacity to withstand extreme operating temperatures for extended periods of time; ideal for highperformance applications. To maximize cooling surface area, 32 individual air passages are cast internally into each rotor. Air passages or vents offer increased airflow and cooling capability over standard unvented rotor designs. The slotted surface grooves improve pad-torotor contact 8320 11-3/4” FRONT BRAKES FOR G-MACHINE SCULPTED SPINDLES by wiping the pad clean of debris and allowing 8327 11-3/4” FRONT BRAKES FOR ‘71-80 PINTO/MUSTANG II SPINDLES brake dust and gases to be easily exhausted if the 11-3/4” FRONT BRAKES FOR ‘67-69 CAMARO, ‘64-72 CHEVELLE, 8332 AND ‘64-72 CHEVY II/NOVA pads are overheated. 1, 2 ◾ Billet Aluminum Hub Billet aluminum hubs reduce unnecessary weight and allow components to be easily replaced if damaged or worn. Hubs are silveranodized machine finished with matching screwon, O-ringed cap to prevent oxidation and resist scratching. Assemblies include both 4-1/2” and 4-3/4” five-lug bolt patterns with 1/2 x 2-1/4” wheel studs or optional 1/2 x 3” studs. Wheel bearings and seals also included. 8337 83622 OPTIONS 11-3/4” FRONT BRAKES FOR FABRICATED SPINDLES 11-3/4” FRONT BRAKES FOR ‘65-66 IMPALA/BISCAYNE SPINDLES BLACK E-COAT FINISHED ROTORS RED-FINISH CALIPERS POLISHED-FINISH CALIPERS POLISHED-FINISH HUBS 3”-LONG WHEEL STUDS WW 150-8850K REPLACEMENT PAD SET, STREET/STRIP STANDARD, BP-10 COMPOUND, 100-1000 F˚ NOTES INCLUDES BARE ROTOR, MATTE-BLACK CALIPERS, AND CLEAR-ANODIZED HUBS 1 - 1964 SPINDLE REQUIRES SIMPLE MODIFICATION. 2 - HUB INCREASES TRACK WIDTH 3/4” PER SIDE. E Email: [email protected] E Web: CAChassisworks.com 33 HOME g-Machine 13" - 4-Piston g-Street™ 13 features rear-mounted, fixed, four-piston calipers and 13” directional vaned, slotted, cross-drilled, black e-coated rotors with billet aluminum hats and hubs. The bolt-together hat/hub-rotor assembly allows worn or damaged components to be replaced easily and economically. Our enhanced-friction ceramic-formula brake pads provide smooth engagement, long service life, and low noise and light brake dust levels for performance driving applications. The kit is designed for use with Chassisworks’ exclusive Street-Machine spindles and is an excellent upgrade for vehicles equipped with 17” or larger wheels. ◾ Billet DynaPro Radial-Mount Caliper g-Street™ 13 uses Wilwood’s DynaPro four-piston, billet aluminum, radial-mount caliper for its superior rigidity, and enhanced braking performance and pedal feel. These calipers use a closed end, internal fluid passage design that is further strengthened by four steel bridge bolts extending through the caliper body. Smooth surface transitions help eliminate stress points and reduce overall caliper deflection. The DynaPro caliper uses lightweight, coated aluminum pistons and high-temperature rubber boots to seal out debris from the piston bores. The total seal design reduces unnecessary wear, increasing the service life of the pistons. The four individual pistons apply pressure against both sides of the rotor. Caliper fluid requirements are matched to the output capabilities of commonly used factory master cylinders, ensuring comfortable performance in a wide range of applications. The DynaPro calipers are trouble-free and service-friendly. Vibration-dampening stainless-steel bridge plate inserts protect the caliper body from wear caused by pad movement, greatly extending service life. Two-piece bleed screws are easily accessed at the top of each side of the caliper body and eliminate direct wear to the aluminum body. Brake pads are also easily changed by simply removing the center bridge bolt and sliding the pads out. ◾ SRP Drilled Performance Rotors g-Street™ 13 features a directional-vaned, cross-drilled, slotted, black e-coated rotor measuring 12.90 x 1”. To maximize cooling surface area, forty-eight individual air passages are cast internally into the rotor. Air passages or vanes are directional and curved for increased airflow over standard straight vented rotor designs. The slotted surface and cross-drilled holes improve pad-to-rotor contact by wiping the pad clean and allowing brake dust and gases to be easily exhausted. Rotors are coated to prevent rust on internal and external rotor surfaces. ◾ Billet Aluminum Hat and Hub Separate billet aluminum hats and hubs reduce unnecessary weight and allow components to be easily replaced if damaged or worn. Hats use a solid-wall, concave design to improve rotor stability. Their black-anodized finish prevents oxidation and resists scratching. Rotors and hats are secured by aircraft-quality twelve-point flanged bolts and locking nuts in a twelve-bolt configuration. Hubs are available in silver anodized matte or polished finishes with matching screw-on cap with O-ring 8322 G-STREET 13 (COMPLETE KIT) $1,898.00 seal. Assemblies include both 4-1/2” and 4-3/4” five-lug bolt patterns with 1/2 x OPTIONS POLISHED HUBS 2-1/4” wheel studs or optional 1/2 x 3” studs. Timken® tapered wheel bearings WITHOUT HUBS (UPGRADE KIT) also included. RED POWDER-COATED CALIPERS 34 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME g-Machine 14" - 6-Piston g-Street™ 14 features rear-mounted, fixed, six-piston calipers and 14” directional-vaned, slotted, cross-drilled, black e-coated rotors with billet aluminum hats and hubs. The bolt-together hat/hub-rotor assembly allows worn or damaged components to be replaced easily and economically. Our enhanced-friction ceramic formula brake pads provide smooth engagement, long service life, and low noise and light brake-dust levels for performance driving applications. The kit is designed for use with Chassisworks’ exclusive Street-Machine spindles and is an excellent upgrade for vehicles equipped with 18” or larger wheels. ◾ Billet SL6R Radial-Mount Caliper g-Street™ 14 uses Wilwood’s SL6R six-piston, billet aluminum, radial-mount caliper for its superior rigidity and enhanced braking performance and pedal feel. These calipers use a closed-end design that is further strengthened by five steel bridge bolts extending through the caliper body and directly across the brake pads. Smooth surface transitions help eliminate stress points and reduce overall caliper deflection. The SL6R caliper uses one-piece stainlesssteel pistons and high-temperature, square-faced bore seals. Stainless steel slows heat transfer to the brake fluid and improves the system’s resistance to heat-induced pedal fade. This reduction in heat also increases the service life of the fluid and seals. The six individual pistons apply even pressure against both sides of the rotor when in motion. Trailing-edge piston bores are larger in diameter, correcting uneven pad wear. Caliper fluid requirements are matched to the output capabilities of commonly used factory master cylinders, ensuring comfortable performance in a wide range of applications. The SL6R calipers are trouble-free and service-friendly. Vibration-dampening stainless-steel bridge-plate inserts protect the caliper body from wear caused by pad movement, greatly extending service life. Dampened external fluid tubes are routed through recessed pockets to keep clear of debris and reduce the potential of vibration induced wear at the fittings. Two-piece bleed screws are easily accessed at the top of each side of the caliper body and eliminate direct wear to the aluminum body. Brake pads are also changed easily by simply removing the center bridge bolt and sliding the pads out. ◾ SRP Drilled Performance Rotors g-Street™ 14 features a directional-vaned, cross-drilled, slotted, black e-coat rotor measuring 14 x 1.25”. To create more surface area and maximize cooling, thirty-six individual ‘I’-shaped passages are cast internally into the rotor. Air passages or vanes are directional and curved for increased airflow over standard straight vented rotor designs. The slotted surface and cross-drilled holes improve pad-to-rotor contact by wiping the pad clean and allowing brake dust and gases to be easily exhausted. Rotors are coated to prevent rust on internal and external rotor surfaces. ◾ Billet Aluminum Hat and Hub Separate billet aluminum hats and hubs reduce unnecessary weight and allow components to be easily replaced if damaged or worn. Hats use a solid-wall, concave design to improve rotor stability. Their black-anodized finish prevents oxidation and resists scratching. Rotors and hats are secured by aircraft-quality twelve-point flanged bolts and locking nuts in a twelve-bolt configuration. Hubs are available in silver-anodized matte or polished finishes with matching 8323 G-STREET 14 (COMPLETE KIT) screw-on cap with O-ring seal. Assemblies include both 4-1/2” and 4-3/4” OPTIONS POLISHED HUBS five-lug bolt patterns with 1/2 x 2-1/4” wheel studs or optional 1/2 x 3” studs. WITHOUT HUBS (UPGRADE KIT) Timken® tapered wheel bearings also included. RED-POWDER-COATED CALIPERS E Email: [email protected] E Web: CAChassisworks.com 35 HOME gStreet Billet Upright and Brake Kit ◾ NEW PRODUCT ◾ BILLET-ALUMINUM UNIT-BEARING UPRIGHT WITH GSTREET LARGE-ROTOR DISC BRAKE KIT ◾ Billet-Aluminum Upright Engineered to work with Chassisworks bolt-on clips and 4x2” weld-in suspension crossmembers, the billet-aluminum unit-bearing upright again raises the pro-touring bar. The lightweight upright features a heavy-duty, sealed unit bearing that is both larger in diameter and considerably more reliable than the commonly used and frequently replaced Corvette components. ◾ Bump-Steer Kit The latest innovation from the mind of Chris Alston is our infinitely adjustable bump-steer kit with Teflon®-lined 4130 rod end. Utilizing a unique 3/4” threaded stud with locknut, the height of the pivot point can be quickly adjusted without disassembly or hasseling with shim stacks. No other adjustment mechanism is this precise. Features/Benefits: ◾ Lightweight billet-aluminum upright with stainlesssteel tapered balljoint inserts ◾ Maintenance friendly, heavy-duty unit-bearing; larger and more reliable than Corvette bearing ◾ Unique threaded bump-steer adjustment stud with Teflon®-lined 4130 rod end ◾ Massive 14” and 15” x 1-1/4”-wide vented brake rotors ◾ Radial-mount 6-piston Wilwood calipers with optional Thermlock™ heat-barrier pistons ◾ Lightweight billet-aluminum hat ◾ Disc Brake Kit Continuing down the path of bigger wheels and tires leading to better performance, Chassisworks offers a specially developed brake kit, featuring 14” or massive 15” x 1.25” rotors with radial-mount, Wilwood or Baer, 6-piston calipers in a variety of finishes and optional pad compounds. 36 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME gStreet Billet-Aluminum Upright ◾ NEW PRODUCT ◾ BILLET-ALUMINUM UNIT-BEARING UPRIGHT 3 2 1. Heat-treated, corrosion resistant pivot stud 4 2. Aluminum cap permits access to joint tension adjustment 1 3. Lightweight billetaluminum upright 4. Integrated caliper bracket mounts 5. Unit-bearing hub mounting hardware 6. Steering arm cross bolt 5 6 7. Bolt Circles: 5 on 4-3/4”, 5 on 4-1/2” with 1/2-20 x 2-1/4”-long wheel studs 10 8. Cross-bolted steering arm with locating pin feature 9. Infinitely adjustable bumpsteer outer tie-rod 7 10. Heavy-duty, sealed, tapered roller bearing hub assembly with precision bearings 8 9 5737-SM1-2 UPRIGHT RODEND ARM GM CHASSISWORKS CLIPS, ALUMINUM BODY WITH UNIT-BEARING SPINDLE INCLUDES STEERING ARM WITH THREADED BORE FOR 5/8" RODEND-STYLE TIEROD END NOTE MINIMUM RIM SIZE 18" DIAMETER, DEPENDING ON WIDTH, TO ACCOMMODATE BRAKE ROTOR. E Email: [email protected] E Web: CAChassisworks.com 37 HOME gStreet Threaded Bump-Steer Kit ◾ NEW PRODUCT ◾ INFINITE ADJUST BUMP-STEER KIT Threaded adjuster allows infinite adustment without disassembly or the hassle of shim stacks. Locking jam nut 5/16” hex for allen wrench adjustment Threaded stainlesssteel stud allows precise adjustment Teflon®-lined 4130 spherical rod end Misalignment bushing 12-point flanged all-metal locknut Billet-Steel Adjuster Sleeve 5736-75-56 38 E THREADED BUMPSTEER ADJUSTER AND ROD END TIEROD WITH BILLET ADJUSTING SLEEVE. FOR USE WITH CHASSISWORKS BILLET UPRIGHTS WITH 3/4-16 THREAD STEERING ARMS Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME gStreet 14” and 15” Front Brake Kits ◾ NEW PRODUCT gStreet brake kits for Chassisworks billet upright feature rear-mounted, radial mount, six-piston calipers and 14” or 15” directional-vaned rotors with billet aluminum hats. The bolt-together hat-rotor assembly allows worn or damaged components to be replaced easily and economically. Enhanced-friction ceramic-formula brake pads provide smooth engagement, long service life, low noise, and light brake-dust levels for performance driving applications; performance specific pads also available for autocross and road race applications. The kit is designed for use with Chassisworks’ exclusive gStreet billet-aluminum uprights for vehicles equipped with Chassisworks’ bolt-on front clips or weld-in 4 x 2” crossmembers, clips, and frames. Fourteen- and fifteeninch rotors require 18” and 19” wheels respectively. Includes SRP drilled (black e-coated) rotors, Wilwood calipers (black, red or nickle finish) with optional Thermlock™ heat-barrier pistons, or Baer one-piece calipers. Features/Benefits: ◾ 14” and 15” cross-drilled and vented rotors with black e-coat finish ◾ Wilwood Aero6 6-piston, radial-mount calipers; black, red or nickel finish with Thermlock® pistons ◾ Optional Wilwood brake pad compounds ◾ Baer 6S 6-piston, radial-mount calipers 8377 8378 OPTIONS NOTES GSTREET 14” SRP ROTORS, 6-PISTON W6A CALIPERS (BLACK OR RED) GSTREET 15” SRP ROTORS, 6-PISTON W6A CALIPERS (BLACK OR RED) BLACK OR RED POWDER-COAT FINISH CALIPERS NICKEL-COATED CALIPERS WITH THERMLOCK™ HEAT-BARRIER PISTONS STREET AND PERFORMANCE SMART PAD (LOW NOISE, LIGHT DUST) AUTOCROSS SPECIFIC PAD COMPOUND ROAD RACE SPECIFIC PAD COMPOUND FITS gSTREET BILLET-ALUMINUM UPRIGHT FOR CHASSISWORKS CROSSMEMBER SYSTEMS ONLY. E Email: [email protected] E Web: CAChassisworks.com 39 HOME gStreet 14” and 15” Front Brake Kits ◾ NEW PRODUCT ◾ WILWOOD AERO6 6-PISTON CALIPERS The Aero6 six-piston caliper delivers heavy duty stopping power for the road or track. The caliper incorporates race technology into a body design with widespread adaptability. Radial mounting and a rotor diameter range from 14.00” to 15.00” give this caliper the versatility necessary to suit all types of heavy weight braking requirements. Available in black or red powder coat finish, or optional nickel finish with Thermlock™ heat-barrier pistons. ◾ Wilwood ThermLock® Pistons (Nickel-coated caliper only) Thermlock® pistons block heat transfer from the pads and reduce temperatures in the caliper, fluid, and seals by up to 25% over standard stainless steel pistons. These are the go-to calipers for all types sustained hard braking on a wide range of autocross, rally and road course applications. ◾ Brake Pad Compounds The standard street and performance pads included with the gStreet brake kits are suitable for everyday use and occassional performance driving. We recommend upgrading pad compounds for regular autocross and road race use. ◾ BAER 6S 6-PISTON FORGED-MONOBLOCK CALIPERS The Baer 6S is a forged-monoblock 6-piston caliper for pro-touring projects that need race car performance. To maximize strength the 6S caliper is machined from a single aluminum-alloy forging and utilizes an external crossover tube. Calipers feature stainless steel pistons, noise suppression springs, and staggered piston sizes to minimize pad wear. Available in red, black or silver powder-coat finish. 40 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 Brake Pad Compounds STREET/PERFORMANCE AUTOCROSS ROAD RACE LOW NOISE AND DUST LEVELS AGGRESSIVE GRIP AT AMBIENT TEMPERATURE AGGRESSIVE GRIP WITH HIGHER TEMPERATURE RANGE HOME gStreet 14” and 15” Front Brake Kits ◾ NEW PRODUCT ◾ SRP DRILLED PERFORMANCE ROTORS gStreet brake kits feature directionalvaned, cross‑drilled rotors measuring 14” or 15” x 1.25”-wide. To create more surface area and maximize cooling, individual passages are cast internally into the rotor. Air passages or vanes are directional and curved for increased airflow over standard straight vented rotor designs. The slotted surface and cross-drilled holes improve pad-torotor contact by wiping the pad clean and allowing brake dust and gases to be easily exhausted. Rotors are black e-coated to prevent rust on internal and external rotor surfaces. ◾ 14" and 15" rotors for big-tire, high-performance Pro-Touring builds ◾ gStreet 15" ◾ gStreet 14" 15 x 1.25” 14 x 1.25” E Email: [email protected] E Web: CAChassisworks.com 41 HOME g-Machine Anti-Roll Bars ◾ Anti-Roll Bars for g-Machine A-Arms Our street/track performance g-Machine anti-roll bar offers substantially increased stiffness and flatter cornering over our standard Street-Machine component. Kits are designed for Chassisworks direct-fit Camaro and Chevy II or custom 30” and 33” g-Machine crossmember systems equipped with g-Machine A-arms. Anti-roll bars are 24 to 38 x 1 x .188”-wall, 4130 chrome-moly tubing with relatively short lever arms to achieve comparable performance to solid 1-1/8” to 1‑1/4” factory replacement bars at a fraction of the weight. Teflon® race, spherical-bearing, end-link assemblies create deflection-free pivot points with minimal-resistance and enable the anti-roll bar’s effects Hardware for Street-Machine Arms E to be immediate, more linear, and predictable. End-link length is also adjustable to eliminate static preload and ensure balanced handling. Polished, billet aluminum clamps mount the anti-roll bar to the factory-welded crossmember mounts and are securely held by 3/8” socket-head bolts. Graphite-impregnated, black-urethane chassis bushings improve lubrication and isolate the anti-roll bar at the frame mounts. g-Machine anti-roll bars ship as complete kits with matte-black, powdercoat finish; alloy-steel zinc-plated hardware; and temperature-stable, chemicalresistant, Teflon® grease. F Hardware for g-Machine Arms ◾ Anti-Roll Bars for Street-Machine A-Arms Suitable for street/strip performance vehicles, our tubular anti-roll bars for g-Machine crossmember systems equipped with Street-Machine A-arms offer increased stiffness with less body roll than standard OEM suspensions. Anti-roll bars are constructed from 0.120”-wall, 4130 chrome-moly tubing with relatively short lever arms to provide large-diameter stiffness and performance in a much smaller, lighter-weight component. Threaded adapters are welded at each end to provide a positive stop for 3/8” button-head bolts and ensure bushings are correctly preloaded. Polished, billet aluminum clamps mount the anti-roll bar to the factory-welded crossmember mounts and are securely held by 3/8” socket-head 6178 42 E Anti-Roll Bar with Hardware 6154 6155 1” G-MACHINE, MATTE-BLACK 1-1/4” G-MACHINE, MATTE-BLACK bolts. End links are a unique, billet steel component with an eye-style upper mount to allow unrestricted bar rotation and a stem-style lower end to better dampen vibration. Graphiteimpregnated, black urethane bushings are used throughout to improve lubrication and isolate the anti-roll bar at the frame mounts and end links. Street-Machine anti-roll bars ship as complete kits with gloss-black powder-coat finish; stainless-steel hardware; and temperature-stable, chemical-resistant, Teflon® grease. ANTI-ROLL BAR WITH HARDWARE, 3/4” STREET-MACHINE, GLOSS-BLACK POWDER-COAT FINISH Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Billet Gun-Drilled Anti-Roll Bar ◾ Gun-Drilled Splined-End Anti-Roll Our street/track performance gStreet anti-roll bar offers substantially increased stiffness and flatter cornering over our standard Street-Machine component. Kits are designed for Chassisworks direct-fit Camaro and Chevy II or custom 30” and 33” g-Machine crossmember systems equipped with g-Machine A-arms. Anti-roll bar manufacturing begins with 1.25”OD alloy steel bar, which is then gun-drilled to significantly reduce weight. The billet lever arms feature multiple endlink mounting holes for a total of six different spring rates and are secured by a single-split splined collar clamp integrated into the arm. Teflon® race, spherical-bearing, end-link assemblies create deflection-free pivot points with minimalresistance and enable the anti-roll bar’s effects to be immediate, more linear, and predictable. End-link length is also adjustable to eliminate static preload and ensure balanced handling. Billet aluminum bearing housings mount the anti-roll bar to the factorywelded mounting blocks and are securely held by 3/8” socket-head bolts. Low-friction polymer bearings allow the bar to pivot freely without introducing off-axis free play. Anti-roll bars ship as complete kits with zinc-plated components and hardware. 5735-SM30-12588 5735-SM33-12588 7962-0119 7962-0120 Adjustable Bar Stiffness ◾ NEW PRODUCT ◾ Fits 1967-81 Camaro and 1962-72 Nova with Chassisworks g-Machine Clips Features/Benefits: ◾ 1-1/4”-OD heat treated, alloy steel bar ◾ Billet-steel splined arms with multiple endlink positions ◾ Six-different stiffness settings ◾ Spherical bearing end links with Teflon lined races ◾ Billet-aluminum bearing housings ◾ Low-friction polymer bearings ◾ Zinc-plate or anodize finish ‘62-67 CHEVY II/NOVA GSTREET CLIP ‘67-81 CAMARO, ‘68-72 NOVA GSTREET CLIPS WELD-ON ADAPTER PLATE, 2" WIDE (2 REQ.) WELD-ON ADAPTER PLATE, 2" WIDE (2 REQ.) Billet AlloySteel Arm ◾ This product can be retrofit to your existing Chassisworks Front Clip! 1-1/4” OD Gun-Drilled Bar Billet Aluminum Bearing Housing Spherical Bearing End-Links Zero-Play Split-Collar Attachment Polymer Bearing Locking Bolt Groove Splined Connection E Socket Head Hardware Email: [email protected] E Web: CAChassisworks.com 43 HOME Steering Columns and Accessories ◾ g-Machine Steering Columns Aftermarket straight and eight-position tilt steering columns are available for a broad range of retrofit and universal vehicle applications. Retrofit columns, in most cases, match the factory steering wheel taper and spline, wiring harness, and general dimensions, providing a relatively simple installation project with excellent results and quality you can really feel. A variety of finishes are available including paintable steel, black powder coat, brushed and clear coated, and chrome. Columns specific to our g-Machine suspension system conversions are listed, but other columns can be purchased at custom lengths. ◾ Column shift versions ◾ Keyed ignitions available ◾ Universal lengths from 12" to 35" ◾ Available in left- and right-hand-drive versions ◾ Retrofit Steering Columns MAKE CHRYSLER FORD GM MODEL E-BODY JEEP MUSTANG TRUCK A-BODY CAMARO CORVETTE EL CAMINO IMPALA NOVA CHEVY TRUCK YEAR 1970-74 1976-86 1965-69 1953-56 1965-79 1964-72 1967-69 1953-68 1959-60 1958-67 1962-73 1955-57 1947-54 1960-78 ◾ Universal lengths from 12" to 35" ◾ Call for Applications not listed IDT 1120648020 IDT 1120648010 IDT 1120688051 IDT 1250680051 IDT 1120688020 IDT 1250680020 IDT 1120688010 IDT 1250680010 IDT 1520798051 IDT 1520798020 IDT 1520798010 44 E 62-67 CHEVY II/NOVA - CHROME TILT COLUMN (LEFT-HAND DRIVE - USA) FOR CHASSISWORKS CLIP 62-67 CHEVY II/NOVA - PAINTABLE TILT COLUMN (LEFT-HAND DRIVE - USA) FOR CHASSISWORKS CLIP 67-68 CAMARO - BLACK TILT COLUMN (LEFT-HAND DRIVE - USA) FOR CHASSISWORKS CLIP 67-68 CAMARO - BLACK TILT COLUMN (RIGHT-HAND DRIVE - AUSTRALIA) FOR OEM CLIP 67-68 CAMARO - CHROME TILT COLUMN (LEFT-HAND DRIVE - USA) FOR CHASSISWORKS CLIP 67-68 CAMARO - CHROME TILT COLUMN (RIGHT-HAND DRIVE - AUSTRALIA) FOR OEM CLIP 67-68 CAMARO - PAINTABLE TILT COLUMN (LEFT-HAND DRIVE - USA) FOR CHASSISWORKS CLIP 67-68 CAMARO - PAINTABLE TILT COLUMN (RIGHT-HAND DRIVE - AUSTRALIA) FOR OEM CLIP 69 CAMARO - BLACK TILT COLUMN (LEFT-HAND DRIVE - USA) FOR CHASSISWORKS CLIP 69 CAMARO - CHROME TILT COLUMN (LEFT-HAND DRIVE - USA) FOR CHASSISWORKS CLIP 69 CAMARO - PAINTABLE TILT COLUMN (LEFT-HAND DRIVE - USA) FOR CHASSISWORKS CLIP Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME g-Machine-System Power Steering Pump using the included billet mounting bracket and spacers. Pumps are avaialble with a compact integrated plastic reservoir or with a remote-mounted, polished billet-aluminum reservoir. V-belt or serpentine polished pulleys can also be selected with either pump style. Built upon a lightweight, aluminum-bodied power-steering pump, Chassisworks g-Machine system offers versatility in a variety of engine and performance applciations. The GMstyle pump is a direct bolt-on for LS-series engines and can be easily installed on small-block or big-block Chevy engines ◾ Remote-Reservoir Power-Steering Pump Kit 6138 REMOTE-RESERVIOR POWER STEERING PUMP INCLUDES PUMP WITH PULLEY, ENGINE MOUNTING BRACKET AND BILLET REMOTE RESERVIOR OPTIONS LS1 MOUNTING OPTION SMALL-BLOCK CHEVY OR BIG-BLOCK CHEVY MOUNT 6 X 6" UNIVERSAL MOUNTING BRACKET BLANK (REQUIRES MACHINING) 5" V-BELT PULLEY 4-7/8" SERPENTINE PULLEY STAINLESS-TEFLON® HOSE KIT 5720-001 FITTING SET, 16MM AND 18MM O-RING TO -6 AN 5720-001 - O-ring to -6 AN adaters for use with steering boxes ◾ Integrated-Reservoir Power-Steering Pump Kit 6137 INTEGRATED-RESERVOIR POWER STEERING PUMP - INCLUDES INTEGRAL PLASTIC RESERVIOR PUMP WITH PULLEY AND ENGINE MOUNTING BRACKET. OPTIONS LS1 MOUNTING OPTION SMALL-BLOCK CHEVY OR BIG-BLOCK CHEVY MOUNT 6 X 6" UNIVERSAL MOUNTING BRACKET BLANK (REQUIRES MACHINING) 5" V-BELT PULLEY 4-7/8" SERPENTINE PULLEY STAINLESS-TEFLON® HOSE KIT 5720-001 FITTING SET, 16MM AND 18MM O-RING TO -6 AN 5720-001 - O-ring to -6 AN adaters for use with steering boxes E Email: [email protected] E Web: CAChassisworks.com 45 HOME g-Machine Power Rack and Pinion The g-Machine front-steer power rack and pinion provides responsive steering with excellent driver feedback as a direct bolton for Chassisworks g-Machine Chevy II crossmember systems. To increase durability, performance, and reduce deflection, the rack body, control servo, and hard lines are constructed from steel. Hard lines are routed tightly against the rack body and low-profile, rotatable banjo fittings are used exclusively at the control servo to better package the rack for installation. 6140-215-1 6140-215-2 6140-215-1RIGHT 6140-215-2RIGHT G-MACHINE POWER RACK, 21.5” LEFT-HAND-DRIVE, BLACK G-MACHINE POWER RACK, 21.5” LEFT-HAND-DRIVE, CHROME G-MACHINE POWER RACK, 21.5” RIGHT-HAND-DRIVE, BLACK G-MACHINE POWER RACK, 21.5” RIGHT-HAND-DRIVE, CHROME Racks shown as viewed from front of vehicle ◾ Left-Hand-Drive Rack Tightly Routed Hard Lines ◾ Right-Hand-Drive Rack Low-Profile Banjo Fittings Rack Specifications Feature Rack Travel Specification/Dimension 3 turns lock to lock, 1.8” per turn, 5.375” total travel Inner-Tie-Rod Thread 9/16-18 RH Male Inner-Tie-Rod Length1 10.135” Tie-Rod Assembly Length2 13.283” Input Shaft 16.8-mm DD Hydraulic Fittings -6 AN (pressure and return) Recommended Pump Flow Rate 1.0 - 1.5 gpm (3.8 - 5.7 lpm) Notes: 46 1 Measured from tie-rod pivot center to end of threaded shaft. 2 Measured from center of inner- and outer-tie-rod pivots. E ◾ Internal Components For smooth gear engagement and extended service life, helical-cut rack-and-pinion gears are guided by a combination of low-friction, polymer bushings and roller bearings. A gearlash mechanism enables precise and predictable “zero-play” steering with no need for future adjustment. Tie-rods are screwed directly into the rack gear and locked using crush tabs to prevent loosening. During final assembly all internal components are thoroughly lubricated and durable rubber boots attached to completely seal the rack and prevent contaminants from entering. Connecting the rack and pinion requires a 16.8-mm DD universal joint, 9/16”-18 female-thread tie-rods or bumpsteer adjusting sleeves, and -6 AN highpressure hose ends. Kits are available with black-powder-coatfinished rack and anodized-satin-finished mounts or chromeplated rack with polished mounts. Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME g-Machine Power Rack and Pinion ◾ Power Rack Clamp Mounts Our unique clamping installation method enables the rack to be rotated within its mounts to adjust steering-shaft clearance and universal-joint angles. The solid billet aluminum base-and-clamp assembly uses our slot-tab positioning method for perfect alignment with the factory-welded g-Machine crossmember. Once tightened into mating grooves at the widest portion of the rack body, the deflection-free mount completely prevents the rack from shifting. 6139-215-1 6139-215-2 5/16” SocketHead Fastener Countersunk Fasteners BILLET CLAMP SET FOR 21.5” RACK, SATIN FINISH BILLET CLAMP SET FOR 21.5” RACK, POLISHED FINISH Billet Aluminum Construction 1/2” SocketHead Fastener High-Collar Lock Washers Interlocking Male Tab Slot-Tab Technology, Interlocking Joint Pinion Rotated Down Pinion Rotated Up E Email: [email protected] E Web: CAChassisworks.com 47 HOME Billet Manual Rack and Pinion A common issue with many custom steering and suspension conversions is achieving correct steering geometry using the limited selection of OEM and aftermarket rack and pinions. To solve this problem the g-Machine front-steer, manual rack and pinion can be sized from 15.5” to 29.5” (measured from inner tie-rod pivots), in one-inch increments, without affecting rack travel, 6175-215-1 steering effort, or reliability. This enables correct steering 6175-215-2 geometry for vehicles ranging from compacts to full-size pickups and allows the assembly to serve as a direct-replacement upgrade for 24.5” Mustang II racks. BILLET MANUAL RACK AND PINION, 21.5”, SATIN FINISH BILLET MANUAL RACK AND PINION, 21.5”, POLISHED FINISH Racks shown as viewed from front of vehicle ◾ Satin-Finish Rack ◾ Polished-Finish Rack ◾ Rack-and-Pinion Body The rack-and-pinion main body is made up of three components threaded together at O-ring–sealed joints to create a rigid, lightweight structure. A sturdy, polished, stainless-steel center tube connects the gear box to the outer body and features a smaller diameter for additional harmonicbalancer clearance. The gear box and opposite-end rack body are CNC-machined from aluminum to increase wall thickness for added strength directly under the rack mounting clamps without excessive weight. ◾ Unique Sculpted Gear Box A sculpted-surface gear box shape was developed through the use of finite element analysis (FEA) software to eliminate fatigue points, minimize gear box deflection, and provide an attractive modernized appearance. Due to the complexity in engineering and machining this component, most manufacturers are limited to inferior cast or simple geometric designs. To attach the protective rubber boots at each end of the rack assembly, external grooves are present for slip-proof installation and easy replacement if ever necessary. Rack-and-Pinion Specific Dimensions Feature Rack Travel Specification/Dimension 4 turns lock to lock, 1.31” per turn, 5.25” total travel Inner-Tie-Rod Thread 9/16”-18 RH Male Inner-Tie-Rod Length 10.135” Tie-Rod Assembly Length2 13.283” Input Shaft 3/4“-36 Spline 1 Notes: 1 Measured from tie-rod pivot center to end of threaded shaft. 2 Measured from center of inner- and outer-tie-rod pivots. 48 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Billet Manual Rack and Pinion ◾ Manual Rack Clamp Mounts Installation is a simple bolt-on for Chassisworks g-Machine crossmember systems, with minimal fabrication required for custom installations. Our unique clamping installation method and short pinion shaft move the lower U-joint farther below the exhaust and enable the rack to be rotated within its mounts to adjust steering-shaft clearance and universal-joint angles. Note: Custom installation requires knowledge of steering and suspension geometry. 6176-1 6176-2 Countersunk Fasteners BILLET CLAMP SET FOR 21.5” MANUAL RACK, SATIN FINISH BILLET CLAMP SET FOR 21.5” MANUAL RACK, POLISHED FINISH 5/16” Socket Head Fastener Billet Aluminum Construction 1/2” Socket Head Fastener High-Collar Lock Washers Pinion Rotated Up Pinion Rotated Down Interlocking Male Tab Slot-Tab Technology, Interlocking Joint E Email: [email protected] E Web: CAChassisworks.com 49 HOME Steering Columns and Components ◾ OEM-Column Steering-Shaft Kits Vehicle-specific steering column kits enable simple bolt-in installation and are available for use on factory or aftermarket columns with Chassisworks power or billet aluminum manual rack and pinions. Supplied hardware includes, OEM steering- column adapters or shafts; upper and lower 35-degreemisalignment, needle-bearing universal joints; 3/4” DD intermediate steering shaft; column mounts (if applicable); and necessary hardware. ◾ Chevy II 1962-66 (6184 series) Includes upper steering column and intermediate shafts, U-joints, self-lubricating shaft bushing, firewall column mount, and Upper U-Joint necessary hardware. 6184 FOR OEM COLUMN AND MANUAL RACK FOR OEM COLUMN AND POWER RACK FOR OEM COLUMN AND MUSTANG II RACK 6184-PS 6184-13 Replacement Column Shaft Intermediate Shaft Firewall Column Mount Lower Column Shaft Bushing ◾ Chevy II 1967 (6185 series) Includes steering column lower-shaft adapter, intermediate shaft, U‑joints, and necessary hardware. 6185 6185-PS 6185-13 FOR OEM COLUMN AND MANUAL RACK FOR OEM COLUMN AND POWER RACK FOR OEM COLUMN AND MUSTANG II RACK Lower U-Joint Intermediate Shaft Upper U-Joint Lower U-Joint OEM Column Adapter ◾ Aftermarket-Columns and Steering-Shaft Kits Aftermarket eight-position tilt steering columns are available in paintable steel, chrome plated, black power coated, brushed aluminum and polished aluminum. Steering shafts accepts factory or aftermarket steering wheel and 3/4”36, 1”-48 splined or 1”-DD universal joints. Wiring connection for the turn signal and horn uses a GM-style harness plug. Columns specific to our g-Machine suspension system conversions are available as well as custom length columns. Fits ’62-67 Chevy II 6144-1-DD 6330 6146-1-DD CALL TO DIRECT-FIT TILT STEERING COLUMNS - LEFT OR RIGHT HAND ORDER DRIVE VERSIONS AVAILABLE - PAINTABLE STEEL, CHROME, BLACK PAINTED, BRUSHED ALUMINUM, AND POLISHED ALUMINUM 50 E 6144-1-48 6144-1-DD 6144-75-36 6146-1-48 6146-1-DD 6146-75-36 6330 Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 U-JOINTS AND SHAFT FOR 1”-48, MANUAL RACK U-JOINTS AND SHAFT FOR 1”-DD, MANUAL RACK U-JOINTS AND SHAFT FOR 3/4”-36, MANUAL RACK U-JOINTS AND SHAFT FOR 1”-48, POWER RACK U-JOINTS AND SHAFT FOR 1”-DD, POWER RACK U-JOINTS AND SHAFT FOR 3/4”-36, POWER RACK FIREWALL MOUNT, 2” TO 2-1/2” AFTERMARKET COLUMNS HOME Bump-Steer Tie-Rod Sets Chassisworks’ bumpsteer kits replace the standard outer ◾ 6151 – For g-Machine Sculpted Spindle tie-rod with an adjustable billet steel sleeve and a high▪ Tapered stud with 5/8”-18 shank ▪ Billet steel adjustment sleeve strength, Teflon®-lined, 4130-body rod end. The tapered ▪ Highly adjustable shim stack or 1/2” Grade 8 stud, along with a selection of shims, ▪ Low-friction Teflon® liner enables vertical adjustment of the outer pivot point at the ▪ 4130 body (15,200 lb USL rating) steering arm. This lets you correct unwanted toe-in changes ▪ Two-piece rod end ▪ 7/8”-wrench hex during suspension travel when working with performance alignment settings, while maintaining steering predictability. The seamless sleeve features a 7/8” hex to facilitate precise toe adjustment and tightening of the zinc-plated jam nuts. Kits are for use with Chassisworks’ billet manual or power rack and pinions with g-Machine sculpted or fabricated 6151 BUMPSTEER OUTER TIE-ROD SET FOR CHASSISWORKS dropped spindles, and they ship with necessary hardware. SCULPTED SPINDLE ◾ What is Bumpsteer? Bumpsteer is the change in “toe,” or left to right angle, as the suspension moves through its range of motion. Bumpsteer is most evident on rough road surfaces, during hard cornering, or under heavy braking. With proper installation and settings, the bumpsteer kit can minimize and in most cases virtually eliminate the bumpsteer effect, making handling more consistent and predictable. ◾ 6167 – For Drag Race Fabricated Spindle ▪ 1/2” Grade 8 bolt (stud) ▪ 4130 body (15,200 lb USL rating) ▪ Low-friction Teflon® liner ▪ Two-piece rod end ▪ 7/8”-wrench hex ◾ Installation and Setup Installation of this kit requires the suspension to be moved through its range of travel and the toe measured at the extremes of the range and at ride height. This can be accomplished at home using a bumpsteer gauge, but we recommend taking your vehicle to a qualified alignment shop. 6167 BUMPSTEER OUTER TIE-ROD SET FOR CHASSISWORKS FABRICATED SPINDLE Standard Tie-Rod Set OEM-quality, outer tie-rod set connects the Chassisworks ◾ 6177 – Street-Machine Tie-Rod Set billet manual or power rack and pinion to the g-Machine (Chassisworks’ billet manual or power rack and pinion) sculpted or Mustang II-style spindles. The fixed-height pivot ▪ Inner: 9/16”-18 RH thread Spindle: Chassisworks’ sculpted spindle position is optimized for non-aggressive alignment settings of ▪ Stud: 1/2”-20 street-driven vehicles. Toe adjustments require detaching the ▪ Length: 5.0” tie-rod from the spindle’s steering arm. Final setting is locked ▪ Taper Minor: .554” by a single, zinc-plated jam nut at each tie-rod. Tie-rods feature ▪ Taper Major: .626” a paintable, bare-metal finish and ship with durable rubber ▪ Taper Length: .576” boots, grease zerk fittings, and necessary hardware. 6177 OUTER TIE-ROD SET FOR CHASSISWORKS’ SCULPTED SPINDLE, 5” LENGTH E Email: [email protected] E Web: CAChassisworks.com 51 HOME Headers, g-Machine System Available for both small-block and big-block Chevy engines with standard exhaust-port locations, Chassisworks’ thermalbarrier-coated, long-tube headers ensure a perfect-fit exhaust solution for our direct bolt-on g-Machine suspension systems. Header and welding fixtures were created from a completechassis computer model to ensure precise tube placement with ample clearance provided for steering shaft, clutch linkage, motor mounts, and frame rails, without negatively affecting ground clearance. Primary tubes are lightweight yet sturdy, 16-gauge, CNC-mandrel-bent, steel tubing, free from obstructive butt welds and sized for high-horsepower levels easily achieved with modern engine combinations. Tube sizes: 1-3/4” primaries with 3” collectors and 2-1/4” reducers for small blocks; 2” primaries with 3-1/2” collectors and 2-1/2” reducers for big blocks. Header and collector flanges are single-piece, 3/8”-thick plate steel for improved sealing, with individually laser-cut mounting holes and weight-reduction features to avoid unsightly and warp-prone lead-in cuts to each hole. Headers can be ordered as bare steel or with a special chemical-resistant, thermal-barrier, metallic-ceramic coating applied inside and out to reduce radiated heat and improve exhaust-flow velocity. The dualprocess internal coating is boost- and nitrous-safe with a maximum temperature limit of 2000° Fahrenheit. Factory finish is a bright metallic but can be easily polished for a more chrome-like appearance. Kits include ARP 12-point header bolts, graphite-impregnated expanded-metal core gaskets, and trim-to-fit collector reducers and hardware. Shown Above: Chevy II, Big-Block Chevy, Cermakrome Coated (6451) Shown Below: Chevy II, Small-Block Chevy, Bare Steel (6452) Cermakrome Coated Bare Steel ARP 12-Point Header Bolts Single-Piece 3/8”-Thick Flange Ceramic-Metallic Thermal-Barrier Coating 6450 6451 6452 6453 3642 3643 3644 3645 52 E CHEVY II, SMALL-BLOCK CHEVY, 1-3/4” PRIMARIES, CERMAKROME COATED CHEVY II, BIG-BLOCK CHEVY, 2” PRIMARIES, CERMAKROME COATED CHEVY II, SMALL-BLOCK CHEVY, 1-3/4” PRIMARIES, BARE STEEL CHEVY II, BIG-BLOCK CHEVY, 2” PRIMARIES, BARE STEEL REPLACEMENT 3” COLLECTOR GASKET, SMALL-BLOCK CHEVY (PAIR) REPLACEMENT 3-1/2” COLLECTOR GASKET, BIG-BLOCK CHEVY (PAIR) REPLACEMENT HEADER GASKET, SMALL-BLOCK CHEVY, SQUARE PORT (PAIR) REPLACEMENT HEADER GASKET, BIG-BLOCK CHEVY, ROUND PORT (PAIR) Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME '62-67 Chevy II Front Coil-Over Conversion Converting the stock front suspension of your 1962-67 Chevy II Nova or 1963‑67 Pontiac Acadian to coil-over shocks is now a simple bolt-on procedure. Our exclusive modular shock-tower-adapter system and spherical-stem assembly gives you a choice of stock or lowered ride heights and can be used for a broad variety of performance applications. The tower adapter and lower crossbar replace the factory shock mount and lower spring perch respectively. Lightweight billetaluminum VariShock coil-overs are available in 16-position single-adjustable or 256-combination double-adjustable versions and provide 7-1/2” of suspension travel. Choice of spring rates range from 350 to 750 lb/in., suitable for street-friendly ride quality to pro-touring and competitive handling performance. A second set of different rate springs can also be selected as an option for tuning purposes. Kits include shocks, springs, tower adapters with reinforcement Shock tower mount plates, and mounting hardware. ◾ Bolt-in installation with OEMstyle upper control arms ◾ Modular shock-tower adapters with choice of stock or lowered ride height ◾ Spring-rate specific to vehicle weight and performance application ◾ Greaseable spherical-stem upper shock mount ◾ Heavy-duty urethane-bushed lower crossbar ◾ Available in 16-position singleadjustable or 256-combination double-adjustable versions Reinforcement plate Spherical stem mount Progressive rate bump stop 350-750 lb/in rate springs Adjustable, locking spring seat 16-position adjustment knob (single or double adjustable) Billet lower crossbar E Email: [email protected] E Web: CAChassisworks.com 53 HOME '62-67 Chevy II Front Coil-Over Conversion ◾ Spherical Stem Mount Our free-pivoting, deflection-free mount allows precise suspension tuning by eliminating compliant rubber or urethane bushings. The VariShock exclusive, spherical-stem assembly attaches the coil-over shock to the chassis at the factory mounting location. The swedged-steel mount base effectively captures and houses the spherical bearing of the stem. The stem mounts directly to the shock-tower adapter and is secured by a 5/8” locknut. An integral hex at the top of the stem enables the stem to be securely held as the locknut is tightened during installation. An easily accessible zerk fitting mounted at the tip of the stem injects grease directly onto the bearing contact surfaces. ◾ Locking Lower Spring Seat A redesigned, one-piece lower spring seat does not require a locknut; it’s locked in place by two ball locks that press into the grooves on the reservoir body and easily unlock for adjustment with an Allen wrench. Spring seats accept 2-1/2”ID coil springs. ◾ Billet Lower Crossbar The lower cross-bar assembly replaces the factory spring perch and mounts directly to the factory upper control arm. A 1/2” stud and crush washer are used to thread the two billet crossbar halves together and apply the proper amount of bushing preload. The lower cross-bar bushings have up to 350% more urethane material than common 1/2” shock eyes offered by other brands. To improve spring and shock absorber performance we chose a premium urethane with much higher load capacity and longer service life. Grease Zerk Stem Wrench Hex 5/8” Locknut Exterior Washer Spherical Bearing Pivot Housing Billet Aluminum Upper Spring Seat High-density foam bump stop High-Travel 2-1/2”-ID VariSprings Billet Aluminum Shock Body Threaded Body for Preload Adjustment Billet Aluminum Locking Lower Spring Seat 16-Position PositiveClick Adjustment Knobs Billet Direct-Fit Lower Crossbar Premium Urethane Bushings with 350% More Material for Greater Load Capacity 54 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME '62-67 Chevy II Front Coil-Over Conversion ◾ Shock Tower Adapter System Our exclusive shock tower adapter system is used to position the shock at the correct height for your specific vehicle and performance application. Two different adapters enable us to offer a stock-to-raised or stock-to-lowered ride-height option, covering the full range of performance applications and vehicle styles. The upper mount utilizes the factory shock tower mounting holes and is a direct bolt-on for most applications. Some installations may require minor trimming of sheetmetal seams to ensure a solid mount. Adapter plates mount on top of the shock tower with a steel reinforcement backup ring to sandwich the shock-tower sheet metal, helping to evenly distribute loads. Adapter mounts are black powder coated and can be fit with optional polished-stainless-steel caps for an extremely clean and finished appearance. Polished-Billet- Stainless Cap (optional) Zero Offset Adapter Stock to 2” raised ride height 1” Offset Adapter Stock to 2” lowered ride height Shock Tower Back-up Plate Mounting Hardware E Email: [email protected] E Web: CAChassisworks.com 55 HOME '62-67 Chevy II Front Coil-Over Conversion ◾ Spring Selection Guidelines A good spring rate baseline for a Chevy II with an iron small block is 450 lb./in. Differences that alter desired spring rate: Weight Reduction -50 lbs Big Block +100 lbs Road Race +50 lbs (better handling) Drag Race -50 lbs (more stored energy) Spring rate affects ride quality, ride height and roll rate characteristics. Differences in vehicles such as aluminum engine components, fiberglass body parts and chassis stiffening should be taken into consideration. Additional springs can be purchased for tuning purposes. VAS 86X10F1 VAS 86X10F2 RIDE HEIGHT TOWER CAP SPRING RATE 2ND SPRING SET ACCESSORIES ◾ 9” VariSprings Rate (lb/in) Part Number 350 VAS 21-09350 400 VAS 21-09400 450 VAS 21-09450 500 VAS 21-09500 550 VAS 21-09550 600 VAS 21-09600 675 VAS 21-09675 750 VAS 21-09750 FRONT COIL-OVER CONVERSION, SINGLE-ADJUSTABLE '62-67 CHEVY II/NOVA, '63-67 ACADIAN FRONT COIL-OVER CONVERSION, DOUBLE-ADJUSTABLE '62-67 CHEVY II/NOVA, '63-67 ACADIAN 2" LOWERED TO STOCK RIDE HEIGHT STOCK TO 2" RAISED RIDE HEIGHT SHOCK TOWER CAP, POLISHED STAINLESS STEEL 350, 400, 450, 500, 550, 600, 675, OR 750 LB/IN SPRINGS SECOND SET OF SPRINGS FOR TUNING SPRING SEAT THRUST BEARINGS COIL-SPRING COMPRESSOR SPANNER WRENCH '62-67 Chevy II Front Air-Spring Conversion Our exclusive modular shock-tower-adapter system and spherical-stem assembly can give you a choice of stock or lowered ride-height range and can be used for a broad variety of vehicles and performance applications. The tower adapter and lower crossbar replaces the factory shock mount and lower spring perch respectively. Lightweight billet-aluminum VariShock air-spring shock are available in 16-position single-adjustable or 256-combination doubleadjustable versions and provide 6” of suspension travel. Kits include VariShock Air-Spring shocks, 90-degree air fitting, tower adapters with reinforcement plate, mounting hardware, and spot weld removal tool. VAS 13X10-F1 VAS 13X10-F2 RIDE HEIGHT TOWER CAP 56 E FRONT COIL-OVER CONVERSION, SINGLE-ADJUSTABLE - '62-67 CHEVY II/NOVA, '63-67 ACADIAN FRONT COIL-OVER CONVERSION, DOUBLE-ADJUSTABLE - '62-67 CHEVY II/NOVA, '63-67 ACADIAN 2" LOWERED TO STOCK RIDE HEIGHT STOCK TO 2" RAISED RIDE HEIGHT SHOCK TOWER CAP, POLISHED STAINLESS STEEL Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME g-Bar and g-Link Suspension Conversions The g-Bar and g-Link are bolt-in, canted 4-bar suspension systems directly replace the OEM leaf springs and shocks for remarkably improved handling and performance. Each can be used with our vehicle-specific bolt-in FAB9 housing or the vehicle’s existing housing. Additional welding is required for installation with all housings other than our bolt-in FAB9. Chassisworks' second-generation g-Bar and g-Link suspension systems represent the current state-of-the-art in canted 4-bar design. Available for 1967-81 Camaros, ◾◾Applications: 1962-67 Chevy IIs, 1968-72 ◾◾'67-69 Camaro Novas, 1964-70 Mustangs, and ◾◾'70-81 Camaro 1967-70 Cougars. The g-Bar ◾◾'62-67 Chevy II system consists of three different ◾◾'68-72 Nova combinations of upper and ◾◾'64-70 Mustang lower link bars with your choice ◾◾'67-70 Cougar of VariShock coil-overs or air springs. These options create six different variations to better suit your particular performance application. See the following pages for individual photos of each system. Newly Updated! g-Bar and g-Link Coil-Over Suspension ◾ Also available equipped with VariShock air springs 58XX-XXX OPTIONS ◾ g-Bar & g-Link Street & Performance Systems g-Bar and its variant, g-Link, dramatically improve ride quality and performance over the stock leaf-spring suspension. The canted 4-bar design is a proven suspension system commonly used in later model American muscle cars of all makes. Four individual arms precisely position the rear axle, better defining the correct suspension travel path. A panhard bar is not required with this style of suspension. This enables spring rates to be easily changed without altering suspension CANTED-4-BAR SUSPENSION CONVERSIONS FAB9 DIRECT-FIT REAREND HOUSING ANTI-ROLL BAR, SLIDING LINK STYLE, CHASSIS MOUNTED ANTI-ROLL BAR, SPLINE END STYLE, HOUSING MOUNTED QUICKSET 2, DOUBLE-ADJUSTABLE SHOCK UPGRADE geometry or allowing changes in pinion angle and lateral movement. Lighter spring rates can be used for better ride quality without allowing leaf-spring wrap-up, a common source of wheel hop. Our links are available with premium urethane or, pivot-ball ends to create controlled ride quality that inspires more confident performance driving. g-Bar and g-Link includes VariShock QuickSet 1 singleadjustable coil-over shocks (DA pictured) with spring rates E Email: [email protected] E Web: CAChassisworks.com 57 HOME g-Bar and g-Link Suspension Conversions (per your vehicle’s rear weight) ranging from 110-350 lbs/in. VariShock features 16-position valving adjustment within our specifically designed range. The VariShock QuickSet 2 double- adjustable shock (shown) is also available to truly unlock the tuning potential of the g-Bar. QuickSet 2s are available at a substantial discount when purchased with g-Bar. Air-Spring g-Bar suspension with OEM housing and sliding link anti-roll bar g-Link suspension with FAB9 housing and splined-end anti-roll bar ◾ Self-Positioning Installation Installation requires no fabrication, with only minimal welding and trimming required for certain applications. The g-Bar chassis cradle uses a “self-positioning” system utilizing existing factory-mounting features for direct location of the cradle or as an accurate reference point. Our multi-piece cradle design allows for variations in OEM chassis component locations. It is then welded to structural components of the vehicle, such as frame rails or reinforced sections of sheet metal. Multiple attachment points and tubular construction successfully create an effective chassisstiffening cradle as well as a stable suspension-mounting crossmember. The cradle has a black-powder-coat finish and the frame adapters are “Self-positioning” system utilizes existing pinion snubber and top clear-zinc plated to prevent rust and to make them easier to stitch weld shock mount factory bolt holes. into the chassis. They are easily painted after installation. Chassis-attachment points for upper link bars and shocks are provided on the g-Bar cradle. The front of the lower link bars utilizes the factory front-leaf-spring mounting brackets. When using the stock rearend housing, our lower link bars and shocks fasten to our bracket assembly and are securely u-bolted directly to the existing leaf-spring pads. The rear of the upper-linkbar attachment points require mounting tabs be welded to the housing. An easy-to-use weld fixture is available Lower links mount at OEM leaf-spring brackets g-Bar axle bracket assembly to facilitate this task. Anti-roll bars are also available. A preassembled, fabricated 9” housing (FAB9) complete with welded bracket assemblies is also available, streamlining installation and saving time. The FAB9 housing accepts standard 9” Ford components. Accurate weld-fixture placement Simple to use upper bracket weld fixture 58 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME g-Bar and g-Link Suspension Conversions ◾ Adjustable Suspension Geometry Upper and lower control arm attachment points have multiple mounting holes to adjust chassis anti-squat to optimize your vehicle’s handling characteristics. Both upper bars are length adjustable to set pinion angle and preload. g-Link lower arms are also adjustable for wheelbase variations. Some vehicles are worn enough that the wheelbase will not be correct without using a wheelbase adjustable lower link. 4-position FAB9 lower arm bracket ◾ Multiple Lower-Link-Bar Styles There are three lower link styles and two upper link styles. Their proper selection depends on the intended use of your vehicle. ◾ Poly-Bushing Lower Bar Channeled bushings Billet bushing housing ◾ Poly-Bushing Lower Bar Included in the g-Bar system is the lower fixedlength-tubular link with poly bushings in each end. It is best for vehicles seeing mostly street use because it provides a quiet ride and improved handling. ◾ Pivot Ball Lower Link Included in g-Link system is the lower adjustable-length-tubular link with pivot ball mechanisms in each end. This is our ultimate performance link for use on performance driven street or track applications. Available with centered or offset pivots for additional tire clearance with mini-tubs. ◾ Billet Pivot Ball Lower Link Included in the billet g-Link system is the lower fixed-length billet I-beam link with pivot ball mechanism in each end. The billet link features all radius corners for reduction of stress risers and a pocket area for lower weight. This ultimate link is for those who want to set their g-Machine apart from the crowd. It combines the characteristics of our fixed-length link (which is easier install) with the best performance links and, adds a custom built g-Machine look. All link bars are externally greasable at each end. Pivot ball mechanism can be rebuilt and tightened to remove play as they wear. Lower link bar fronts attach to the front leaf-spring eye in the chassis. Available with centered or offset pivots for additional tire clearance with mini-tubs. 2-position chassis and housing arm brackets Recessed tubing seat ◾ Pivot Ball Lower Link Offset pivot option for more tire clearance with mini-tubs Billet bearing housing Polymer races Threaded retaining ring One-piece billet aluminum arm Offset-pivot for more tire clearance with mini-tubs E Exclusive pivot ball mechanism Lightweight pocket milled I-beam design Email: [email protected] E Web: CAChassisworks.com 59 HOME g-Bar and g-Link Suspension Conversions ◾ Upper Link Bars Both styles of upper links are constructed of billet alloy steel and clear zinc finished for corrosion resistance. They are length adjustable, and feature a Chassisworks exclusive - massive 7/8”-shank billet alloy steel rod ends. g-Bar (Poly) Upper Bar Billet bushing housing Poly-Bushing Upper Bar Poly links use urethane bushings in both ends for a stiffer-than-stock ride. They are included in the g-Bar system. Pivot Ball Upper Link Pivot ball links are included with g-Link and billet g-Link systems and are used when no-compromise handling is required. The high misalignment and noncompressible nature of these links will guarantee your vehicle goes where you point it. Available in singleand double-adjustable versions. 7/8”-shank Poly bushings g-Link (Pivot) Double-Adjutable Link g-Link (Pivot) Single-Adjutable Link Threaded retaining ring Billet bearing housing 7/8”-shank Polymer races ◾ Adjustable Shock Mounts Billet aluminum double shear lower shock mounts bolt directly to the back of the lower control arm bracket and provide 4-1/2 inches of ride height adjustments. The upper shock mount has three positions to allow additional ride height and shock angle adjustment. You can adjust the shock angle in at the top to provide increased stability during hard cornering. 3-position upper shock mount ◾ Stock Rearend Housing System is compatible with stock axle housings with at least a 2-13/16” diameter axle tubes. The 1-piece formed UCA axle mount is easier to install than 2-piece styles. Upper control arm brackets weld on and lower control arm brackets attach to the housing on the leaf spring pad using included fasteners. ◾ Exhaust Clearance The rear section of the factory exhaust is not compatible with g-Bar. Although space is limited, there is room to run a custom built exhaust system over the housing. Easier solutions include turn-downs before the housing or routing the exhaust underneath the housing. 60 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 4-position lower shock mount HOME g-Bar Coil-Over Suspension Systems To take full advantage of the outboard mounting position, a complete custom shock absorber was developed by our sister company, VariShock. A revolutionary adjustment mechanism, smaller than any previous design, allows our billet-aluminum body to be both shorter and lighter. The urethane eyes have up to 350% more urethane material than other brands, for superior load distribution, yet no less clearance around the eye. We also chose a premium urethane that has much higher load capacity (for improved life) than the poly bushings from other manufacturers. Urethane ends are 1-1/4” wide and accept 1/2” bolts. Installed height, travel, valving range, and mounting configuration are built to our exact specifications, whereas other manufactures are forced compromise with “off-the-shelf” products. ◾ High-Travel VariSprings The new VariSpring line of springs was designed to complement the VariShock family. Once again, we used higher technology to resolve application limitations. These springs are manufactured using a new chrome-silicon, ultra-high-tensile wire. This allows the springs to “set solid.” The springs can compress until the coils touch without damaging the spring or causing it to take a set, which ultimately changes the ride height. Since this wire can flex more than conventional wire, these springs have greater travel than our competitors’ springs of the same rate. These springs will allow your shocks to travel their full range of motion without going solid. This gives you greater traction and control at full bump, plus additional suspension travel for tuning. VariSprings have a silver-powder-coat finish. ◾ Spring Rate Selection Spring rate affects ride quality, ride height, roll rate, and performance handling characteristics. Differences in vehicles such as aluminum engine components, vehicle weight distribution, fiberglass body parts, chassis stiffening as well as wheel-size and offset and the specific performance application, should be taken into consideration. Additional tuning springs are available at a discount when purchased with a system. A good spring-rate baseline for vehicles with rear g-Bar or g-Link, and with a small-block engine seeing regular street use would be 175-200 lbs/in., depending upon desired ride quality. A good baseline is for every 100-lb. change in rear vehicle weight, the spring rate needs to change by 25 lb/in. E Email: [email protected] E Web: CAChassisworks.com 61 HOME g-Bar Coil-Over - Chevy II / Nova 62-67 ◾ G-BAR (POLY EYE) Poly-bushing equipped g-Bar is best suited for primarily street-use vehicles for its quiet ride and improved handling. 5800-X10 1962-67 CHEVY II SHOCKS SENSISET QUICKSET 1 QUICKSET 2 OPTIONS WELD-ON BRACKETS WELD FIXTURE Lower Arms • Tubular Steel • Polyurethane Bushings • Fixed Length Upper Arms • Billet Steel • Polyurethane Bushings • Adjustable Length ◾ G-LINK (PIVOT BALL) Pivot-ball equipped g-Link is the ultimate suspension link for use on performance driven street or track applications. Centered or offset pivots for additional tire clearance with mini-tubs. 5804-X10 1962-67 CHEVY II 5854-X10 1962-67 CHEVY II (MINI-TUB) SHOCKS QUICKSET 1 QUICKSET 2 QUICKSET 4 REMOTE OPTIONS WELD-ON BRACKETS WELD FIXTURE Upper Arms • Billet Steel • Pivot Ball • Adjustable Length Lower Arms • Tubular Steel • Pivot Ball • Adjustable Length Centered Position Weld-on bracket replaces factory leaf-spring mount, maintains same centerline as original spring. ◾ Compatible with Mini-Tubs Mini-Tub Position Weld-on bracket moves lower control arms inboard, below frame rail, for greatly increased tire clearance. ◾ BILLET G-LINK (PIVOT BALL) Pivot-ball equipped Billet g-Link features a fixedlength, I-beam lower arm for performance driven street applications. Centered or offset pivots for additional tire clearance with mini-tubs. 5813-X10 1962-67 NOVA 5854-X10 1962-67 CHEVY II (MINI-TUB) SHOCKS QUICKSET 1 QUICKSET 2 QUICKSET 4 REMOTE OPTIONS WELD-ON BRACKETS WELD FIXTURE ◾ Compatible with Mini-Tubs 62 E Upper Arms • Billet Steel • Pivot Ball • Adjustable Length Lower Arms • Billet Aluminum • Pivot Ball • Fixed Length Centered Position Weld-on bracket replaces factory leaf-spring mount, maintains same centerline as original spring. Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 Mini-Tub Position Weld-on bracket moves lower control arms inboard, below frame rail, for greatly increased tire clearance. HOME g-Bar Air-Spring Suspension Systems VariShock air-spring systems enable instant ride-height and ride-quality adjustment. Air springs incorporate VariShock valve technology and are available in single- or double-adjustable versions. When fully deflated, the vehicle rests 5 to 6 inches below stock ride height and can be raised to driving height at the push of a button. A compressor system (available separately) is required for operation. ◾ VariShock Air Springs VariShock air springs are a unique product line that combines VariShock valve technology with air springs. Air spring units feature the same revolutionary adjustment mechanism found in our VariShock coilovers, but revalved to meet the special requirements of an air spring configuration. This combination of technologies gives you complete ride control as well as adjustable ground clearance. For the ultimate in driving performance and ride height adjustability, we recommend VariShock air springs. ◾ Compressor Systems To enable care-free operation of your air spring suspension, we offer a variety of complete air management systems as well as indiviual components to configure a custom solution. ◾ AirPod™ System AirPod™ systems conveniently mount the tank, compressor(s), and valve set on one easily installed plate, eliminating tedious wiring and plumbing. E Email: [email protected] E Web: CAChassisworks.com 63 HOME g-Bar Air-Spring - Chevy II / Nova 62-67 ◾ G-BAR (POLY EYE) Poly-bushing equipped g-Bar is best suited for primarily street-use vehicles for its quiet ride and improved handling. 5801-X10 1962-67 CHEVY II SHOCKS SENSISET QUICKSET 1 QUICKSET 2 OPTIONS WELD-ON BRACKETS WELD FIXTURE Lower Arms • Tubular Steel • Polyurethane Bushings • Fixed Length Upper Arms • Billet Steel • Polyurethane Bushings • Adjustable Length ◾ G-LINK (PIVOT BALL) Pivot-ball equipped g-Link is the ultimate suspension link for use on performance driven street or track applications. Centered or offset pivots for additional tire clearance with mini-tubs. 5805-X10 1962-67 CHEVY II 5854-X10 1962-67 CHEVY II (MINI-TUB) SHOCKS QUICKSET 1 QUICKSET 2 QUICKSET 4 REMOTE OPTIONS WELD-ON BRACKETS WELD FIXTURE Upper Arms • Billet Steel • Pivot Ball • Adjustable Length Lower Arms • Tubular Steel • Pivot Ball • Adjustable Length Centered Position Weld-on bracket replaces factory leaf-spring mount, maintains same centerline as original spring. ◾ Compatible with Mini-Tubs Mini-Tub Position Weld-on bracket moves lower control arms inboard, below frame rail, for greatly increased tire clearance. ◾ BILLET G-LINK (PIVOT BALL) Pivot-ball equipped Billet g-Link features a fixedlength, I-beam lower arm for performance driven street applications. Centered or offset pivots for additional tire clearance with mini-tubs. 5814-X10 1962-67 NOVA 5854-X10 1962-67 CHEVY II (MINI-TUB) SHOCKS QUICKSET 1 QUICKSET 2 QUICKSET 4 REMOTE OPTIONS WELD-ON BRACKETS WELD FIXTURE ◾ Compatible with Mini-Tubs 64 E Upper Arms • Billet Steel • Pivot Ball • Adjustable Length Lower Arms • Billet Aluminum • Pivot Ball • Fixed Length Centered Position Weld-on bracket replaces factory leaf-spring mount, maintains same centerline as original spring. Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 Mini-Tub Position Weld-on bracket moves lower control arms inboard, below frame rail, for greatly increased tire clearance. HOME g-Bar Rear Anti-Roll Bars Chassisworks developed two styles of rear anti-roll bars for use with our g-Bar and g-Link canted-rear-suspension systems. The first, a solid, adjustable rate, bar mounted to the frame rearward of the rearend housing. The second, a splined-end, tubular bar mounted to the rearend housing, below the axle. ◾ Do I really need a rear anti-roll bar? In an effort to correct excessive body roll on a muscle car, the common approach is to add a large front anti-roll bar. This may initially appear to correct the issue, but with the unintended result of increased understeer on an already nose-heavy vehicle. To regain vehicle cornering balance a rear anti-roll bar may be needed. For mild street-performance vehicles a rear anti-roll bar will provide a noticeable improvement to the “tightness” of the handling. However, on high-performance vehicles operating at or near the vehicle’s traction limits, careful testing is required. First, to determine need of a rear bar, and then to properly setup the vehicle to optimize cornering balance. Testing your vehicle with different springs, shock settings and anti-roll bars will definitely yield increased handling. If it is a specific look you are after then that’s a good enough reason to put one on your car. Nothing is better looking than our billet g-Bar, with splined-end anti-roll bar with billet aluminum arms. ◾ Sliding-Link Adjustable Anti-Roll Bar The sliding-link anti-roll bar system features a 5/8”-diameter, solid bar mounted to the same frame adapter brackets as the g-Bar suspension cradle for a complete bolt-on installation. Billetaluminum bushing housings securely hold the bar and feature a grease-zerk fitting, and black-polyurethane bushings with internal grease passages. Our unique sliding-link mechanism, utilizes three distinct indents at each end of the anti-roll-bar lever to create six incremental adjustments. The CNC-machined clevis is locked into each detent by a set screw and jam nut, preventing unintended sliding or twisting of the assembly. Links consist of 3/8” rod-ends, allowing the anti-roll bar to be precisely set to a neutral, non-preload condition, by adjusting the assembly length. The sliding-link anti-roll bar system can be used on the entire family of g-Bar suspensions. Note: Required g-Bar frame-adapter bracket with integrated anti-roll bar mounting flange is packaged with g-Bar system and must be selected at time of g-Bar purchase. 5/8”-diameter adjustable-rate bar Polyurethane bushing Billet-aluminum mount 3-position adjustment mechanism (6 total combinations) Adjustable-length endlinks for zero preload 5812-F10 5812-F20 5812-M10 5812-X10 5812-X20 G-BAR SLIDING-LINK ANTI-ROLL BAR, 1967-69 CAMARO G-BAR SLIDING-LINK ANTI-ROLL BAR, 1970-81 CAMARO G-BAR SLIDING-LINK ANTI-ROLL BAR, 1964-70 MUSTANG, 1967-70 COUGAR G-BAR SLIDING-LINK ANTI-ROLL BAR, 1962-67 CHEVY II G-BAR SLIDING-LINK ANTI-ROLL BAR, 1968-72 NOVA E Email: [email protected] E Web: CAChassisworks.com 65 HOME g-Bar Rear Anti-Roll Bars ◾ Splined-End Tubular Anti-Roll Bar Our splined-end anti-roll bar system features a 3/4”-diameter, bent-tube design, that mounts below the rearend-housing. The bar adequately clears FAB9 and OEM center sections, without decreasing ground clearance. An adjustable, billet-pivot-socket mechanism threads into the g-Bar lower axle-bracket sleeve, and allows the bar to rotate smoothly in a play-free joint. Bars are available in stock and narrowed widths for use with mini-tubbed vehicles. Billet-aluminum arms extend forward, and are connected to the chassis through links consisting of adjustable-length, 3/8” rod-end assemblies. This allows the anti-roll bar to be precisely set 5806-F10 5806-F20 5821-F10 5821-F20 5806-M10 5806-X10 in a neutral, non-preloaded state. Double-shear, steel mounts are welded along the stronger, outside corner and across the bottom of the stock frame rail. The combination of Chassisworks' exclusive pivot mechanism, splined bar ends, spherical-bearing links, and rigid chassis attachment eliminates delayed resistance in the anti-roll bar system, common with rubber-, or urethane-mounted systems. The splined-end anti-roll bar system can be used on the entire family of g-Bar suspensions. Note: Required g-Bar axle bracket with integrated anti-roll-bar socket boss is packaged with g-Bar system and must be selected at time of g-Bar purchase. G-BAR SPLINED-END ANTI-ROLL BAR, 1967-69 CAMARO, 1968-72 NOVA G-BAR SPLINED-END ANTI-ROLL BAR, 1970-81 CAMARO G-BAR MINI-TUB SPLINED-END ANTI-ROLL BAR, 1967-69 CAMARO, 1968-72 NOVA G-BAR MINI-TUB SPLINED-END ANTI-ROLL BAR, 1970-81 CAMARO G-BAR SPLINED-END ANTI-ROLL BAR, 1964-70 MUSTANG, 1967-70 COUGAR G-BAR SPLINED-END ANTI-ROLL BAR, 1962-67 CHEVY II/NOVA Low-friction polymer bearing Billet splined bar end Compatible with Mini-Tubs Lightweight 3/4” hollow bar Pivot-socket housing Center-section clearance bends 1/2”-drive jam fastener Billet-aluminum lever arm Double-shear frame clevis Adjustable-length endlink assembly Shown installed on g-Bar FAB9 housing 66 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME g-Bar FAB9 Rearend Housings Optionally, a folded back brace assembly can be factory welded to your FAB9 housing, substantially strengthening the housing without adding significant weight. Standard housings are constructed from mild steel, but can be upgraded to 4130 chromemoly; recommended for vehicles weighing over 3500 lbs., and/or developing 650-plus horsepower. Housing hardware includes: billet-aluminum, o-ringed filler/inspection cap; axle-tube vent; magnetic drain plug; and alloy-steel, 12-point, mounting studs with locknuts. Engineered to accept all 9”, Ford-style differentials, each FAB9 includes a fully-welded center section with internal gussets, 3” axle tubes, and Ford big-bearing late-model Torino or small-GM ends (with 3.15" bearing) housing ends. All housings are manufactured in-house utilizing our state-ofthe-art robotic spray-arc welder. Weld penetration, and quality are absolutely outstanding, guaranteeing consistent, reliable performance. Center sections are fully CNC-machined after welding to provide an excellent third-member-seal surface and extremely tight tolerances on the remaining housing features. ◾ g-Bar Direct-Fit FAB9 Housings Chassisworks' g-Bar FAB9 offers exceptional performance, reliability, and adjustability in a bolt-on, factory-welded housing, complete with all suspension brackets. Housings are engineered for proper clearance using either VariShock coil-overs or air-spring suspension; with or without a back brace. Anti-roll-bar bracket options include chassis-mounted (sliding-link bar), axle-housing mounted (splined-end bar), or no anti-roll-bar brackets installed. ◾ Narrowed Housings The versatility of the FAB9 housing allows you to choose from standard stock widths or specialty housings that enable use of extremely wide tire and wheel combinations. Mini-Tub FAB9 - Lower axle brackets and control arms are moved inward to allow more room for deeper backspaced wheels on mini-tub equipped vehicles. Narrowed Widths - End-to-end housing widths can be narrowed in 1/4" increments to allow deeper outside wheel lips and adequate fender clearance. Complete correct length axle packages and third members are also available. Ask our sales representatives for details. ◾ Available for mini-tub equipped vehicles ◾ Accurate, factory-welded construction ◾ Available in mild-steel and 4130 versions ◾ Accepts all 9" Ford-style differentials ◾ Saves hours of installation time E Email: [email protected] E Web: CAChassisworks.com 67 HOME g-Bar FAB9 Rearend Housings Save time with direct-fit FAB9s™! Narrowlower-bracket FAB9 available for mini-tubs! ◾ g-Bar FAB9 for Chassis-Mounted Anti-Roll Bar Anti-roll-bar endlink mount Sliding-link anti-roll bar 84F10-601* 84F10-611* 84F20-601* 84F20-611* 84M10-601 84M10-611 84M20-601 84M20-611 84X10-601* 84X10-611* OPTIONS NOTE MILD-STEEL FAB9 HOUSING, '67-69 CAMARO, '68-72 NOVA 4130 FAB9 HOUSING, '67-69 CAMARO, '68-72 NOVA MILD-STEEL FAB9 HOUSING, '70-81 CAMARO 4130 FAB9 HOUSING, '70-81 CAMARO MILD-STEEL FAB9 HOUSING, ‘64-66 MUSTANG 4130 FAB9 HOUSING, ‘64-66 MUSTANG MILD-STEEL FAB9 HOUSING, ‘67-70 MUSTANG, '67-70 COUGAR 4130 FAB9 HOUSING, ‘67-70 MUSTANG, '67-70 COUGAR MILD-STEEL FAB9 HOUSING, '67-67 CHEVY II/NOVA 4130 FAB9 HOUSING, '67-67 CHEVY II/NOVA FOLDED BACK BRACE, MILD STEEL, FACTORY INSTALLED FOLDED BACK BRACE, 4130, FACTORY INSTALLED * AVAILABLE WITH LATE-BIG-FORD OR SMALL-GM HOUSING ENDS PRODUCTS LISTED ARE FOR USE WITH CHASSIS-MOUNTED SLIDING-LINK ANTI-ROLL BAR (5812-XXX) ◾ g-Bar FAB9 for Housing-Mounted, Splined Anti-Roll Bar Splined-end anti-roll bar Anti-roll-bar mounting sleeve 84F10-701* 84F10-711* 84F10-801* 84F10-811* 84F20-701* 84F20-711* 84F20-801* 84F20-811* 84M10-701 84M10-711 84M20-701 84M20-711 84X10-701* 84X10-711* OPTIONS NOTE 68 E MILD-STEEL FAB9 HOUSING, '67-69 CAMARO, '68-72 NOVA 4130 FAB9 HOUSING, '67-69 CAMARO, '68-72 NOVA MILD-STEEL FAB9 FOR MINI-TUB, '67-69 CAMARO, '68-72 NOVA 4130 FAB9 FOR MINI-TUB, '67-69 CAMARO, '68-72 NOVA MILD-STEEL FAB9 HOUSING, '70-81 CAMARO 4130 FAB9 HOUSING, '70-81 CAMARO MILD-STEEL FAB9 FOR MINI-TUB, '70-81 CAMARO 4130 FAB9 FOR MINI-TUB, '70-81 CAMARO MILD-STEEL FAB9 HOUSING, ‘64-66 MUSTANG 4130 FAB9 HOUSING, ‘64-66 MUSTANG MILD-STEEL FAB9 HOUSING, ‘67-70 MUSTANG, '67-70 COUGAR 4130 FAB9 HOUSING, ‘67-70 MUSTANG, '67-70 COUGAR MILD-STEEL FAB9 HOUSING, '67-67 CHEVY II/NOVA 4130 FAB9 HOUSING, '67-67 CHEVY II/NOVA FOLDED BACK BRACE, MILD STEEL, FACTORY INSTALLED FOLDED BACK BRACE, 4130, FACTORY INSTALLED * AVAILABLE WITH LATE-BIG-FORD OR SMALL-GM HOUSING ENDS PRODUCTS LISTED ARE FOR USE WITH HOUSING-MOUNTED SPLINED-END ANTI-ROLL BAR (5806-XXX) Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME OEM-Replacement FAB9 Housings Chassisworks' application-specific housings are engineered to accept stock or aftermarket suspension components to facilitate replacement of your vehicle's original rearend with a FAB9 Ford 9" conversion housing. Housings can be built to standard widths for OEM wheel offsets or narrowed to accommodate wider tire and wheel combinations. Widths can be narrowed in 1/4” increments. All housings include a fully welded center section; housing-filler assembly; vent; drain plug; and a choice of CNC-machined housing ends. Housing options include custom widths, mild steel or 4130 construction, and folded back brace. Complete correct length axle packages and third members are also available. Ask our sales representatives for details. ◾ Direct-Fit Leaf-Spring Housings ◾ A- and G-Body Housings FAB9 Housing for OEM-Style Anti-Roll Bar 84F10-101 84F20-101 84H10-101 84M10-101 84M20-101 84M30-101 84X10-101 OPTIONS 84A10-201 84A10-211 84A10-301 84A10-311 84A20-201 84A20-211 84A20-301 84A20-311 84G10-201 84G10-211 84G10-301 84G10-311 OPTIONS LEAF-SPRING FAB9, MILD STEEL, '67-69 CAMARO LEAF-SPRING FAB9, MILD STEEL, ’70-81 CAMARO LEAF-SPRING FAB9, MILD STEEL, ‘55-57 CHEVY LEAF-SPRING FAB9, MILD STEEL, ‘65-66 MUSTANG LEAF-SPRING FAB9, MILD STEEL, ‘67-70 MUSTANG LEAF-SPRING FAB9, MILD STEEL, ‘71-73 MUSTANG LEAF-SPRING FAB9, MILD STEEL, ’62-67 CHEVY II LATE-BIG-FORD OR SMALL-GM SEAL-STYLE ENDS ◾ '79-04 Mustang Housings URETHANE BUSHING, MILD STEEL, '64-67 A-BODY URETHANE BUSHING, 4130, '64-67 A-BODY SPHERICAL BEARING, MILD STEEL, '64-67 A-BODY SPHERICAL BEARING, 4130, '64-67 A-BODY URETHANE BUSHING, MILD STEEL, '68-72 A-BODY URETHANE BUSHING, 4130, '68-72 A-BODY SPHERICAL BEARING, MILD STEEL, '68-72 A-BODY SPHERICAL BEARING, 4130, '68-72 A-BODY URETHANE BUSHING, MILD STEEL, '78-87 G-BODY URETHANE BUSHING, 4130, '78-87 G-BODY SPHERICAL BEARING, MILD STEEL, '78-87 G-BODY SPHERICAL BEARING, 4130, '78-87 G-BODY MILD-STEEL BACK BRACE, INSTALLED 4130 BACK BRACE, INSTALLED LATE-BIG-FORD OR SMALL-GM SEAL-STYLE ENDS NARROWED HOUSING WIDTH FAB9 Housing for OEM-Style Mounts 84MX0-207 84MX0-217 84MX0-307 84MX0-317 OPTIONS URETHANE BUSHING, MILD STEEL HOUSING URETHANE BUSHING, 4130 HOUSING SPHERICAL BEARING, MILD STEEL HOUSING SPHERICAL BEARING, 4130 HOUSING MILD STEEL BACK BRACE, INSTALLED 4130 BACK BRACE, INSTALLED FAB9 Housing with Anti-Roll-Bar Mounts 84A10-407 URETHANE-BUSHING, MILD-STEEL, '64-67 A-BODY 84A10-417 URETHANE-BUSHING, 4130, '64-67 A-BODY 84A10-507 SPHERICAL-BEARING, MILD-STEEL, '64-67 A-BODY 84A10-517 SPHERICAL-BEARING, 4130, '64-67 A-BODY 84A20-407 URETHANE-BUSHING, MILD-STEEL, '68-72 A-BODY 84A20-417 URETHANE-BUSHING, 4130, '68-72 A-BODY 84A20-507 SPHERICAL-BEARING, MILD-STEEL, '68-72 A-BODY 84A20-517 SPHERICAL-BEARING, 4130, '68-72 A-BODY 84G10-407 URETHANE-BUSHING, MILD-STEEL, '78-87 G-BODY 84G10-417 URETHANE-BUSHING, 4130, '78-87 G-BODY 84G10-507 SPHERICAL-BEARING, MILD-STEEL, '78-87 G-BODY 84G10-517 SPHERICAL-BEARING, 4130, '78-87 G-BODY ADJUSTABLE BILLET-SHOCK-MOUNT SYSTEM FAB9 Housing with Anti-Roll-Bar Mounts 84MX0-407 84MX0-417 84MX0-507 84MX0-517 OPTIONS URETHANE BUSHING, MILD STEEL HOUSING URETHANE BUSHING, 4130 HOUSING SPHERICAL BEARING, MILD STEEL HOUSING SPHERICAL BEARING, 4130 HOUSING MILD STEEL BACK BRACE, INSTALLED 4130 BACK BRACE, INSTALLED E Email: [email protected] E Web: CAChassisworks.com 69 HOME '62-67 Chevy II Mini-Tubs Our new mini-tubs will save you hours of work and effort when making room for larger rear tires under your '67-81 Camaro/Firebird or '68-74 Nova. The wheel tubs replace the inner half of your factory wheel tubs with a newly stamped, 18-gauge steel tub. Additional clearance is 2" to 2-3/4", depending upon application, and will accommodate up to 315- or 335-section-width tires. Installation requires removal of the factory tubs, fabrication of framerail close outs (not included), and welding. Templates are included and spot-weld removal tools optionally available to facilitate installation and fabrication. ◾ NEW PRODUCT ◾ Applications: ◾ '67-69 Camaro ◾ '70-81 Camaro ◾ '62-67 Chevy II ◾ '68-74 Nova 5913-F10 ◾ '67-69 Camaro/Firebird Spot-weld removal bits sold separately ◾ '70-81 Camaro/Firebird ◾ '62-67 Chevy II/Nova 5913-X10 5913-F10 5913-F10-CAP 5913-F20 5913-M10 5913-M10-CAP 5913-X10 5913-X20 6721 NOTES 70 E '67-69 CAMARO, MINI HALF TUB (PAIR) WITH CLOSEOUT KIT, 2-3/4" WIDER, '67-68 MAX. 315 ON 11" WHEEL, '69 MAX. 335 ON 12" WHEEL '67-69 CAMARO, SHEET METAL CLOSEOUT SET ONLY '70-81 CAMARO, MINI HALF TUB (PAIR), 2" WIDER, MAX. 335 ON 12" WHEEL '64-70 MUSTANG, MINI HALF TUB (PAIR), 2" WIDER '64-70 MUSTANG, FRAME RAIL INSERT AND GUSSET SET '62-67 CHEVYII/NOVA, MINI HALF TUB (PAIR), 2-1/2" WIDER, '62-65 MAX. 295, '66-67 MAX. 315 '68-74 NOVA, MINI HALF TUB (PAIR), 2-1/2" WIDER, MAX. 315 ON 11" WHEEL SPOT-WELD REMOVAL BITS (PAIR) PRODUCT REPLACES THE FACTORY INNER WHEEL TUBS ONLY INSTALLATION REQUIRES NOTCHING OF THE FRAME RAIL, FABRICATION OF FRAME CLOSE OUTS, AND WELDING Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 5913-F20 HOME '62-67 Chevy II g-Connector System The bolt-on g-Connector system provides improved chassis stiffness for 1967-81 Camaro/Firebird, 1962-67 Chevy II/Nova, and 1968-72 Nova equipped with Chassisworks' fabricated subframe or OEM subframe (weld-in adapters required). The complete system is comprised of 2" boxedtubing outside frame connectors, 1-5/8" roundtube center connector assembly, adjustable position driveshaft safety loop, and weld-in OEM subframe adapters, if applicable. g-Connector frame connectors, center supports, and driveshaft safety loops are powder-coated black and ship with required mounting hardware. ◾ NEW PRODUCT ◾ Applications: ◾ '67-81 Camaro/Firebird ◾ '62-67 Chevy II/Nova ◾ '68-72 Nova (Hardtop models only) ◾ Complete System Once installed the connector system provides a direct structural bridge between the rear subframe at the spring mount and the front suspension subframe. A noticeable improvement in chassis rigidity yields more responsive handling and sharper acceleration while relying less on the flexible sheet metal for chassis stiffness. Camaro application shown ◾ Subframe Connection The g-Machine subframe’s profile-milled, billet steel connector mount enables a non-flexible, precision fit for the subframe connector. The tubular connector fits snugly over the mount, flush along the lower face, and is securely held in place by doubling plates to more evenly distribute the clamping force from two 1/2” Grade 8 bolts for a slip-free joint. The 2 x 2 x .120”-wall connector tube features multiple, subtle mandrel bends to tightly follow the undercarriage for maximum ground clearance and perfect alignment with the rear factory subframe. To provide the most direct support and increase stability, the OEM leaf-spring mount sandwiches two of the three gusseted connector mounting tabs against the body, while the third tab attaches using a drilled hole at a stronger, contoured area of the undercarriage. This product ships with a black powder-coat finish, complete with Grade 8 hardware and detailed instructions. Camaro/Nova Only Camaro/Nova Only E Email: [email protected] E Web: CAChassisworks.com 71 HOME '62-67 Chevy II g-Connector System ◾ Driveshaft Safety Loop Our bolt-on driveshaft safety loop features a 5-1/2” ID x 2” wide x ¼” thick tubing loop. Both the mounting tab and bracket are ¼” thick mild steel and are secured with grade 8 fasteners. Slotted holes at each of the attachment points allow the loop position to be adjusted for various transmission lengths and driveshaft angles (1/2” vertical, 3/8” horizontal, 3-5/16” fore/aft). Components are powder-coated and zinc plated for corrosion resistance. Installation of our connector support for hardtops is required. ◾ Exploded View ◾ Prices and Options 5900-F10 5900-F21 5900-F22 5900-X10 5900-X20 5901-F10 5901-F21 5901-F22 5901-X20 INCLUDES G-CONNECTOR SYSTEM FOR ‘67-69 CAMARO/FIREBIRD, OEM CLIP G-CONNECTOR SYSTEM FOR ‘70-73 CAMARO/FIREBIRD, OEM CLIP G-CONNECTOR SYSTEM FOR ‘74-81 CAMARO/FIREBIRD, OEM CLIP G-CONNECTOR SYSTEM FOR ‘62-67 CHEVY II/NOVA, OEM OR CHASSISWORKS CLIP G-CONNECTOR SYSTEM FOR ‘68-72 NOVA, OEM CLIP G-CONNECTOR SYSTEM FOR ‘67-69 CAMARO/FIREBIRD, CHASSISWORKS CLIP G-CONNECTOR SYSTEM FOR ‘70-73 CAMARO/FIREBIRD, CHASSISWORKS CLIP G-CONNECTOR SYSTEM FOR ‘74-81 CAMARO/FIREBIRD, CHASSISWORKS CLIP G-CONNECTOR SYSTEM FOR ‘68-72 NOVA, CHASSISWORKS CLIP OUTSIDE FRAME CONNECTORS (SUBFRAME TO REAR SUSPENSION) G-CONNECTOR CENTER SUPPORT DRIVESHAFT SAFETY LOOP OEM FRAME RAIL ADAPTER (IF APPLICABLE) AVAILABLE TO PURCHASE IN STAGES - FRAME CONNECTORS > CENTER SUPPORT > DRIVESHAFT LOOP NOTE 72 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 ◾ NEW PRODUCT HOME Customer Cars ◾ Smoky Crosman - 1966 Nova I just finished a redo on my ’66 Pro Street Nova. I purchased Chassisworks’ complete bolt-on front end for it. When I received it, I was expecting to have some problems, as with anything in the aftermarket. As I was putting the frame on the car and following the detailed instructions, I was amazed that, as I proceeded with the project, everything fit — everything. I couldn’t believe it. I’ve been in the performance business for 30-some-odd years. I’ve assembled and sold performance items, and I’ve always had some sort of hassle with the install. “I couldn’t believe that everything fit...” I was so amazed that I called Chassisworks and told them that something was wrong with the kit. There was a long pause on the other end of the line, ’til I said that I couldn’t believe that everything fit, and that I wanted to compliment the workmanship and the homework that went into putting this kit together. Job well done! Thanks again, Smoky Crosman ◾ Bob Payne - 1966 Nova Earlier this year, I ran into a major chassis problem with my 1966 Nova. I finally made the decision to replace the front clip. I figured that if I was going to go through all of the trouble, I might as well go allout and replace the suspension, brakes, shocks, etc. I have never done anything like that myself, so I had several questions to ask. I called your shop and, boy, was I lucky that it was [technical representative] Mr. Mike Weddle who answered the telephone. Mike not only answered all of my questions; he made several recommendations. He did not try to sell me anything I did not need, but he made sure I got everything that I needed. I was still apprehensive. When I received the shipment, two things immediately caught my attention: the quality of the parts and how thorough, detailed and simple the installation book was. I immediately realized that even I could do this! Once I got back to the track, my fellow racers were absolutely amazed at how everything fit so well. They could not believe how “clean” it all looked, and how my stock fenders, grille and bumper were right where they needed to be. As far as performance, my 60-foot times have never been quicker, nor has my e.t. My steering is tighter than ever because of your rack and pinion, and the adjustable shocks are great. I want you to know that Mike deserves a pat on the back. Because of his assistance, you have a very happy and satisfied customer. Also, every chance I get, I will recommend your business to everyone. Sincerely, Bob Payne E Email: [email protected] E Web: CAChassisworks.com 73 HOME Notes 74 E Order: 800-722-2269 E Technical Assistance/Customer Service: 916-388-0288 HOME Terms and Conditions ◾ ORDERING Business Hours: We are open from 7:00 a.m. to 5:30 p.m. , Pacific Time, Monday through Friday, and 8:00 a.m. to 1:00 p.m. Saturday. Call (800) 722-2269 for ordering only; tech support by email only: [email protected]. Our 24-hour fax number is (916) 388-0295. Mail Orders: When submitting your order by mail, please provide the following information: name, billing address, shipping address, phone numbers, e-mail address, complete part numbers, quantities, and any special instructions. Credit Card Orders: We accept Visa, MasterCard, Discover Card and American Express. Please have your credit card and the billing address available. In order to protect you and us from credit-card fraud, all credit-card orders must be shipped to the credit-card billing address or creditor authorized shipping address. Many credit card companies allow multiple shipping addresses. If necessary, you may need to call your Issuing Bank and establish your “ship-to” address. All freight charges will be added to your shipment (except for truck shipments). Customer is responsible for all costs due to refused or missed shipments. Foreign Orders: All foreign orders must be fully prepaid (including freight) in U.S. funds. Required duties and taxes are not the responsibility of Chassisworks and must be paid by the customer to the appropriate parties. ◾ SHIPPING All of our roll bars, roll cages, chassis, and welded clips are shipped by LTL truck, freight collect. Most other shipments can be sent by a small-package carrier — ground service. Available air-delivery options include: next-day service, 2-day service, 3-day service, or deferred air service to Alaska , Hawaii & Puerto Rico (combination of air and ground). You must inform us if you want your shipment by air service. Additional shipping fees will be applied to your order. Truck: All truck shipments must be 100-percent prepaid. The shipment will go collect for the freight charges only. When receiving freight via truck, it is the customer’s responsibility to verify that he/she is receiving all parts listed on the bill of lading and that all parts received are in good condition. If you sign for something you do not receive, neither the freight company nor Chassisworks/KP Components/Total Control Products/VariShock will be responsible for replacing the item. ◾ RETURNS AND CLAIMS No claims or returns accepted after 30 days from date of invoice. We will only accept a return on a part that has not been modified, is still in its original package, and is in like-new condition. You will be charged a 25-percent restocking fee on any returned goods. And you will be issued a credit with us for the balance of the price you paid for the returned part. Before returning a part, you must call us. You will be given a “Return Authorization Number” (RA#), which you must write on the outside of the box being returned. A copy of the original invoice must be included. All shipping charges on return packages must be prepaid; we will not accept a C.O.D. If, upon examination, all parts are returned and all parts are in a like-new condition, a credit will be issued less the 25-percent restocking fee. No returns on special-order parts (including, but not limited to, axles, FAB9 housings, fiberglass, chassis, welded frames, any part made or ordered to customer specs, etc.). Springs are a tuning item and cannot be returned unless defective. Back Orders: If any parts are back-ordered, they will be so noted on the invoice. Unless notified otherwise, we will ship the back-ordered parts as soon as they become available. ◾ FREIGHT CLAIMS All claims for damages, shortage, or loss must be made immediately with the carrier (i.e., UPS or the freight line). You must note any substantial damage to a package upon receipt of the shipment with the carrier. You may reorder any missing pieces from us. We will send you an invoice for the reordered parts, and you can use this invoice as proof to the carrier of replacement costs. Unfortunately, we cannot make these freight claims for you; however, if we can be of any assistance, please feel free to give us a call. Missing Pieces: Although every effort is made to ensure that each part is packaged complete, inevitably, a component may be missing. You must check each kit as soon as you receive it against the parts list which is enclosed with each part. Any shortage must be reported immediately upon receipt of the product. Claims made after 10 days will not be honored. ◾ WARRANTY NOTICE There are NO WARRANTIES, either expressed or implied. Neither the seller nor manufacturer will be liable for any loss, damage or injury, either direct or indirect, arising from the use or inability to determine the appropriate use of any product. Before any attempt at installation, all drawings and/or instruction sheets should be completely reviewed to determine the suitability of the product for its intended use. In this connection, the user assumes all responsibility and risk. We reserve the right to change specification without notice. Further, Chris Alston’s Chassisworks, Inc., makes NO GUARANTEE in reference to any specific class legality of any component. ALL PRODUCTS ARE INTENDED FOR RACING AND OFF-ROAD USE AND MAY NOT BE LEGALLY USED ON THE HIGHWAY. The products offered for sale are true race-car components and, in all cases, require some fabrication skill. NO PRODUCT OR SERVICE IS DESIGNED OR INTENDED TO PREVENT INJURY OR DEATH. ◾ PRODUCT COLORS Many of the items herein are colored for display purposes only. Your merchandise may arrive as bare metal, or in some finish other than that displayed in this catalog. Please read individual product descriptions for specifics on available finishes and/or discuss with your sales representative. ALL PRICES ARE SUBJECT TO CHANGE. Revised: 04/01/13 The most current version of our terms can be viewed at the Chassisworks website — www.CAChassisworks.com/cac_terms.html. E Email: [email protected] E Web: CAChassisworks.com 75 8661 Younger Creek Drive Sacramento, CA 95828 ◾ Chassis-Builder Discounts! Yes, your shop could qualify for special Builder-Program pricing on popular Chassisworks, KP Components, Total Control, and VariShock products! For details and price quotes, please contact Carl Robinson at (888) 388-0201, Ext. 7612 or [email protected] ◾ Toll-Free Order Line: (800) 722-2269 ◾ Tech Support: [email protected] ◾ Customer Service and International: (916) 388-0288 ◾ Website: www.CAChassisworks.com ◾ 24-Hour Fax: (916) 388-0295 ◾ Product information for each of the Chris Alston’s Chassisworks brands is available through its respective Website: www.CAChassisworks.com www.KPcomponents.com www.TotalControlProducts.com www.VariShock.com CAC-20141120