Lexus - NX 200 - Workshop Manual - 2015 - 2015 (3)

13337 YEARS: 2015-PRESENT Safety glasses should be worn at all times while installing this product . INSTALLATION INSTRUCTIONS MODEL: NX200t/NX300h MAKE: LEXUS STYLE: SUV WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com WEIGHT CARRYING: PRO INSTALL TIME: NOVICE INSTALL TIME: TRAILER WEIGHT: TONGUE WEIGHT: 20 MIN. 40 MIN. IF YOU ARE HESITANT TO UNDERTAKE THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED CURT INSTALLER FOR ADDITIONAL ASSISTANCE. INSTALLATION REQUIRES: 3500 525 WEIGHT DISTRIBUTION: LBS. LBS. INSTALLATION TIPS: TORQUE WRENCH 19mm SOCKET 4000 525 LBS. LBS. VEHICLE PHOTO: 1. BEFORE YOU BEGIN INSTALLATION, READ ALL INSTRUCTIONS THOROUGHLY. 2. TO EASE INSTALLATION, 2 PEOPLE MAY BE REQUIRED. 3. USING PROPER TOOLS WILL GREATLY IMPROVE THE QUALITY OF THE INSTALL AND REDUCE THE TIME REQUIRED. 4. NEED HELP OR HAVE SOME QUESTIONS? CALL TECHNICAL SUPPORT AT 800.798.0813 LEVEL OF DIFFICULTY: RATCHET TRAILER WEIGHT: TONGUE WEIGHT: EASY MODERATE EASY CHALLENGING REMOVE (3) EXHAUST HANGERS REPRESENTATIVE PHOTO HITCH ILLUSTRATION: SAFETY GLASSES WELDNUT CLEANING NO DRILLING MAKE SURE YOUR HITCH MATCHES PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND SCAN FOR MORE INFO CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage. For more information log onto www.curtmfg.com This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684. 5/8/2017 INSTALLATION WALKTHROUGH: ITEM QTY Parts List PART NUMBER DESCRIPTION 1 4 M12-1.25 x 35mm HEX BOLT 2 4 1/2" 1. Lower the exhaust by removing the (3) rearmost rubber exhaust isolators. Note: Support the exhaust during installation to prevent damage. (See Rubber Isolator Removal Diagram.) CONICAL TOOTHED WASHER PASSENGER SIDE FRAME RAIL EXISTING WELDNUTS (BOTH SIDES) DRIVER SIDE FRAME RAIL 2. Raise hitch into position and loosely secure hitch with M12 bolts and conical washers. 2 1 For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com INSTALLATION WALKTHROUGH: 3. Torque all M12 fasteners to 60 ft-lbs. 4. Raise exhaust and reinstall the rubber isolators. For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com 13337 LEXUS NX200t/NX300h 5/8/2017 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 3500 LBS. TRAILER WEIGHT & 525 LBS. TONGUE WEIGHT. GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: 4000 LBS. TRAILER WEIGHT & 525 LBS. TONGUE WEIGHT ***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.*** HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813 Parts List ITEM QTY PART NUMBER DESCRIPTION 1 4 M12-1.25 x 35mm HEX BOLT 2 4 1/2" CONICAL TOOTHED WASHER PASSENGER SIDE FRAME RAIL EXISTING WELDNUTS (BOTH SIDES) TOOLS REQUIRED RATCHET TORQUE WRENCH 19mm SOCKET SAFETY GLASSES DRIVER SIDE FRAME RAIL 2 1 HITCH WEIGHT: 36 LBS. INSTALL TIME PROFESSIONAL: 20 MINUTES NOVICE (DIY): 40 MINUTES INSTALL NOTES: - LOWER EXHAUST - NO DRILLING INSTALLATION STEPS 1. Lower the exhaust by removing the (3) rearmost rubber exhaust isolators. Note: Support the exhaust during installation to prevent damage. (See Rubber Isolator Removal Diagram.) 2. Raise hitch into position and loosely secure hitch with M12 bolts and conical washers. 3. Torque all M12 fasteners to 60 ft-lbs. 4. Raise exhaust and reinstall the rubber isolators. PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND. Scan for more information CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.