Mercury - Milan - Workshop Manual - 2006 - 2009 (2)

Ford Fusion 2006-09 Mercury Milan About the Vehicle Make: Ford Model: Fusion Year: 2006-09 OPTIONS MP3-compatible CD Audio controls on the steering wheel Audiophile 8 Speaker System In-Dash 6 CD Changer Speaker Notes In Dash Application Dash Type: Kit: Harness: Antenna Adapter: Double DIN FD1432AB FDSR CRAB/CRARB Front Speaker Sizes Upper Door: 1'' Tweeter Lower Door: 6X8” Midrange Speaker Adapter: SA68 Speaker Harness: TBA Factory Assembly: (4) T-15 Torx screws securing speaker. NOTES Dimensions: W= 4 7/8'' L= 6 3/4'' D= 3 5/8'' Rear Wire Color Codes +12V Constant = Blue/Red +12v Acc. Switched = DATA Rear Door : 6x8'' Midrange Rear Deck: 6x9'' in rear deck (w/Premium) Speaker Adapter: SA68 Factory Assembly: (4) T-15 Torx screws securing speaker. -12V Chassis Ground = Black/Blue +12V Illumination = DATA NOTES +12V Dimmer = DATA Amp Remote = Yellow/Violet LF+ = White LF- = White/Brown RF+ = White/Violet RF- = White/Orange LR+ = Brown/Green LR- = Brown/Yellow RR+= Brown/White RR- = Brown/Blue Speaker Sizes Dimensions: W= 4 7/8'' L= 6 3/4'' D= 4 3/8'' Ford Fusion 2006-09 Mercury Milan Images Radio removal Radio 1. Using a panel removal tool remove the trim around the radio. 2. Remove the (4) 7mm screws holding the radio in place. Disconnect and remove Front Speaker 1. Extract (2) T15 torx surrounding the perimeter of the door panel. 2. Extract (1) 7mm hex screw located in the door handle pocket. Lift away disconnect and remove. 3. Extract (1) T15 torx located in the door handle release cup. 4. Using a PRT unsnap the perimeter of the door panel. Lift away disconnect and remove. 5. Unsnap tweeter pod from door using a PRT. Lift away disconnect and remove. 6. Extract (4) T15 torx securing factory speaker. Lift away disconnect and remove. Front Speaker Rear Speaker 1. Extract (1) T15 torx surrounding the perimeter of the door panel. 2. Extract (1) 7mm hex screw located in the door handle pocket. Lift away disconnect and remove. 3. Extract (1) T15 torx located in the door handle release cup. 4. Using a PRT unsnap the perimeter of the door panel. Lift away disconnect and remove. 5. Extract (4) T15 torx securing factory speaker. Lift away disconnect and remove. Rear Tweeter 1. Unsnap tweeter pod from door using a PRT. Lift away disconnect and remove. Tweeter Removal